Posted: 4/8/2017 5:19:52 PM EDT
|
First time out with the Resistance 45. Installed 1/2x28 piston and 9mm endcap. Must have let it get loose on the barrel threads because I somehow shot the endcap a bit. Baffles are fine though so no real harm.
Reminder too keep an eye out for looseness, especially when its new and you don't have a good feel for what is "normal". 
|
|
There is a lot of violent vibration going on in the tilt barrel unlocking sequence so it is impossible to have a thread be compatible with production threads, AND be impervious to inadvertent loosening.
If we made the threads tighter than class 3 fit, there would be a lot of barrels that wouldn't fit pistons. Check tightening pistol cans often is a good practice. |
|
Quoted:
There is a lot of violent vibration going on in the tilt barrel unlocking sequence so it is impossible to have a thread be compatible with production threads, AND be impervious to inadvertent loosening. If we made the threads tighter than class 3 fit, there would be a lot of barrels that wouldn't fit pistons. Check tightening pistol cans often is a good practice. |