Posted: 4/1/2005 4:39:24 PM EDT
|
for some reason the pull weight of my almost new match target steadily increases during shooting...after 50+ rounds, trigger seems to be 15+ pounds...so...i ordered a Colt single stage trigger that is used on Colt's accurized match target...SAW lists this kit as item no. SPK94774...Colt and SAW say it will 'drop in' without fitting and give +-6 pound trigger pull (which is manageable)...do you have any special tips for installing this trigger? thanks |
|
I have a couple of these triggers and like them a lot IL_Shooter. Installation is straightforward, though polishing the engagement surfaces is still very helpful and will make a noticable difference. I use a Dremel with a polishing wheel + jewelers rouge. Also, I gently lock the stainless steel hammer and trigger pins in the chuck of my electric drill and gently spin the pins over a brillo pad to polish them and knock down any burrs. Once you've done one end simply flip the pin over and repeat  My favorite carbine is this Colt MT6400C with comp trigger:  |
If I remember correctly SAW charges $115.00 for them. Back when ebay used to allow AR-15 parts auctions I found the one pictured above new in package for $50. Thanks for the kind words A gritty, sloppy trigger is my biggest pet peeve with an otherwise good AR. I'm too impatient to let a trigger break itself in with range time.
|
| installed the jp today. Not an easy task if u want a 3 pound trigger with no creep or overtravel and fitting the saftey, timing the disco and fitting the trigger to the ar well. I ended up packing the gun and driving the 30 miles to a gs to have him install it. cost was dirt cheap and i helped with the install. in all it was worth every penny of the 200 i spent for the kit and install and a box of testting ammo. GS likes to function test any new toy i give hime to work on. For the 2 times a year I need this trigger it a bot over kill. but all that matters is that i sm hsppy. |
|
What I am looking for is a single stage, non-adjustable trigger, that is 3-4.5 lbs (no more no less). Does the colt match trigger fit these specs? I know that a lot of "match" triggers are not designed to be put into duty rifles because they either have a tendency to move from where adjusted, are not as durable, have a tendency not to set off hard primers, or worst of all, reduce the trigger pull weight by using weak springs (usually painted yellow). Do you know if this trigger is made for duty rifles? I need one that is absolutely reliable. How would you compare this trigger to the accuracy speaks trigger? Is it crisp with little take-up and over-travel? I was considering a Jard, but don't want to jack with the trigger and sear block to get it to fit. I think the accuracy speaks fits with no modification, and I know that it is a little better than the colt, but I don't want to sacrifice reliability. I have read that the colts comp's are 4.5lbs, then I read 6lbs. What gives? I would like to have a colt trigger cause I love colt and trust their products 100%. I guess what I am trying to find out though, is whether or not this trigger was meant for range guns or would be recommended to be used in service/duty weapons, and will ignite lake city ammo with 100% reliability, and not wear out. Also, I really want to get down to 4.5 lbs. My factory colt trigger right now is an absolutely unacceptable 8.5lbs. If this is a 3-4.5 lb single stage trigger that is as reliable as a factory trigger, than I definitely want one. I heard that the springs were painted blue. Do you think this indicates a lack of reliability for purposes other than competition, like for a self-defense rifle? I would appreciate any input. Thanks! |