Posted: 3/14/2010 10:19:24 AM EDT
|
Hello, On 01/31/10 I placed an order for a TROY muzzle brake to be pinned on to a MSAR barrel by your company. The barrel was to be shipped by my FFL (Arms-N-Ammo) in NJ. I can't seem to locate my order #. I sent a follow up email to Steve@Adco asking that the barrel be shipped directly to my home. I also sent an email requesting the status of my order last week, but I received no response. Perhaps there have been some communication errors between the FFL and myself. In any case, can you tell me the status of my barrel. Thank You, E. Krieg |
| found your order, I'll have to follow up with the shop regarding status. We may be waiting to hear back from you. Some MSAR barrel are standard .5x28RH, and others are .2x28LH - - if you sent a LH barrel we were waiting to see if you either want it shortened or, you had another flash hider(LH) to install. |
|
Hello,
Thanks for the quick response. I don't know which barrel was sent. It came from a distributor in Florida and was delivered straight to the FFL in NJ and then shipped to ADCO. I have never seen it. I don't have another muzzle brake. If you must shorten the barrel to install the brake that would be OK. Just as long as the rifle is completely LEGAL in it's final configuration. Please let me know if there are any additional charges. Thank You, E. Krieg |
|
Quoted:
If you must shorten the barrel to install the brake that would be OK. Just as long as the rifle is completely LEGAL in it's final configuration. Please let me know if there are any additional charges. If we shorten/rethread the barrel it will cost an additional $65. let us know if thats what you want to do and we'll get it done ASAP. |
