Posted: 8/24/2012 9:49:35 AM EDT
|
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=302141807
So, I spotted this beauty on GB, but seeing as I'm fucking poor I had to discontinue the LE6933 project: however, I like this much better. And for only $1,300 I got... drum roll please..  .. the rifle, deregistered via letter to the NFA; shipping seperately for the upper and lower included (will have the upper sent directly to ADCO for pinning.) I thought that was a pretty good deal, and If you'll notice it's got the restricted rollmarks, cerro forge mark on the lower, .154" fcg pins: all the stuff a cult owner could ask for! Comments welcome-I think this is the most excited I've been for any material thing in my whole life 
|
If you've got first hand experience then hell yah I'll go for it. what's a relatively inexpensive fh and suppressor combo? Thanks
you don't have to get the suppressor right now, rather you can just get the brake/flash hider that works with which ever suppressor you may want in the future. The brake I use on 14.5" barrels is the PWS KAC556 because it is long enough to bring the barrel out to 16.1"+ and I can mount my Knights Armament QDSS-NT4 suppressor on it.
That suppressor is about $1,200 last I checked, but the brake was something like $100 I think. HTH! 
|
|
Quoted:
you don't have to get the suppressor right now, rather you can just get the brake/flash hider that works with which ever suppressor you may want in the future. The brake I use on 14.5" barrels is the PWS KAC556 because it is long enough to bring the barrel out to 16.1"+ and I can mount my Knights Armament QDSS-NT4 suppressor on it. http://farm8.staticflickr.com/7116/7041237155_cc5eff7883_b.jpg http://farm8.staticflickr.com/7222/7041240369_427804da7d_b.jpg That suppressor is about $1,200 last I checked, but the brake was something like $100 I think. HTH! Nice! |
Ended up locating an SDI XA2, seeing as I don't forsee having the $ for a suppressor and since I kinda want to keep this title 1. I've read all about the silver solder method, but also read it may anneal the barrel  any truth to this? (If not, I have a friend who could do this for free!) Also, was wondering if anyone would know what year rifles with SN 0967** were produced? Why do some block out the last two digits of an SN???
|