Posted: 8/10/2010 3:23:48 PM EDT
| On the Gen 2 Micro Dot and the Deluxe 3x magnifier that is offered on the website. Is it possible to use the La Rue LT670 for the 3x magnifier and the LaRue LT751 or LT660 for the micro dot? |
|
Quoted:
A PA micro in an LT-751 should line up with the LT-649 tall. Jeff The LT-649 is way too tall. The Lt-649S is a little too short but the 3X deluxe or Vortex might have enough internal adjustment to compensate. I will order a LT-649A and try it out. If LaRue is in stick I will have it by Friday. Marshall |
|
Quoted:
Quoted:
A PA micro in an LT-751 should line up with the LT-649 tall. Jeff The LT-649 is way too tall. The Lt-649S is a little too short but the 3X deluxe or Vortex might have enough internal adjustment to compensate. I will order a LT-649A and try it out. If LaRue is in stick I will have it by Friday. Marshall Marshall- I have an LT-649T behind a 1/3 lower co-witness Eotech(516/7mm riser) and it works perfect. So if my logic isn't faulty, doesn't this follow? If a PA micro on an LT-751 results in a 1/3 or 2/5 cowitness then the LT-649 tall should line up correctly. Now in the case of the PA micro and an LT660HK, which results in an aboslute co-witness, then the LT-649T would be to tall. It's confusing and maybe I'm not tracking all this correctly. Jeff |
|
...any pics of your setup:? Quoted: Quoted: Quoted: A PA micro in an LT-751 should line up with the LT-649 tall. Jeff The LT-649 is way too tall. The Lt-649S is a little too short but the 3X deluxe or Vortex might have enough internal adjustment to compensate. I will order a LT-649A and try it out. If LaRue is in stick I will have it by Friday. Marshall Marshall- I have an LT-649T behind a 1/3 lower co-witness Eotech(516/7mm riser) and it works perfect. So if my logic isn't faulty, doesn't this follow? If a PA micro on an LT-751 results in a 1/3 or 2/5 cowitness then the LT-649 tall should line up correctly. Now in the case of the PA micro and an LT660HK, which results in an aboslute co-witness, then the LT-649T would be to tall. It's confusing and maybe I'm not tracking all this correctly. Jeff |
|
Here are the first two quick pics.
LT751 and LT649S with Vortex 3X Plent of adjustment in the magnifier to center the dot and get a full sight window. 
New ADM T-1/Micro mount woth LT649S. We have a bunch on order and will have a bundle deal posted as soon as they arrive. 
Both mounts allow for a full sight picture with your irons through the sight window, |
|
Just wanted to verify that if I run the micro red dot in an LT751 the the vortex needs to be in a LT649-S(short) NOT the LT649-T (Tall) Quoted: Here are the first two quick pics. LT751 and LT649S with Vortex 3X Plent of adjustment in the magnifier to center the dot and get a full sight window. http://i211.photobucket.com/albums/bb190/marsh2001/Web%20photos/LT751LT649S.jpg New ADM T-1/Micro mount woth LT649S. We have a bunch on order and will have a bundle deal posted as soon as they arrive. http://i211.photobucket.com/albums/bb190/marsh2001/Web%20photos/ADMLT649S.jpg Both mounts allow for a full sight picture with your irons through the sight window, |
|
Quoted:
Just wanted to verify that if I run the micro red dot in an LT751 the the vortex needs to be in a LT649-S(short) NOT the LT649-T (Tall) Quoted:
Here are the first two quick pics. LT751 and LT649S with Vortex 3X Plent of adjustment in the magnifier to center the dot and get a full sight window. http://i211.photobucket.com/albums/bb190/marsh2001/Web%20photos/LT751LT649S.jpg New ADM T-1/Micro mount woth LT649S. We have a bunch on order and will have a bundle deal posted as soon as they arrive. http://i211.photobucket.com/albums/bb190/marsh2001/Web%20photos/ADMLT649S.jpg Both mounts allow for a full sight picture with your irons through the sight window, Correct, the short version |
|
Quoted:
New ADM T-1/Micro mount woth LT649S. We have a bunch on order and will have a bundle deal posted as soon as they arrive. http://i211.photobucket.com/albums/bb190/marsh2001/Web%20photos/ADMLT649S.jpg Both mounts allow for a full sight picture with your irons through the sight window, Marshall, Which ADM T-1 mount is this in the pic? The T1-10 or the 1/3 co-witness Socom T1-11 ? I see you have both for sale on your website and want to make sure I get the right one to line up tits to my LT649-S. Thanks! |
|
Quoted:
Quoted:
New ADM T-1/Micro mount woth LT649S. We have a bunch on order and will have a bundle deal posted as soon as they arrive. http://i211.photobucket.com/albums/bb190/marsh2001/Web%20photos/ADMLT649S.jpg Both mounts allow for a full sight picture with your irons through the sight window, Marshall, Which ADM T-1 mount is this in the pic? The T1-10 or the 1/3 co-witness Socom T1-11 ? I see you have both for sale on your website and want to make sure I get the right one to line up tits to my LT649-S. Thanks! This one LINK |