Posted: 6/8/2012 3:56:23 PM EDT
|
Hey Marsh,
Do you know what the bullet drops drops are? Nothing in the manual references the drops. Would these be the same as the Burris FF2?? Usurp... |
Burris FF2 is a single dot halo sight.
Graduations above are in MOA. Download Point Blank ballistics software. Plug in ballistic information for your round. By changing your zero 10 yards distance at a time you should be able to match the MOA off at 100 yards with a little calculater use. For example at 810 yard zero your bullet is 11 MOA high at 100 yards. This means with the rifle zeroed for 100 yards you would need to put the target on the top of the thick part of the bottom crosshair to hit something at 810. Either that or plug in information for 100 yard zero and look at data readout and do the math to see at what ranges it matches the MOA drop shown by marks on scope. Either way it's going to take a little math. Point Blank goes down to 5 yard increments. Don't forget that 1 MOA at 100 yards is twice as much at 200 yards. |
|
Casper, thank you for the reply.
I was thinking the drops may be the same as this burris which i have the specs for. FF2 thanks again, Usurp |