User Panel
User Panel
User Panel
|
Posted: 3/14/2015 7:36:05 AM EDT
Anyone have experience with these?
I'm really interested in ordering the OT Core chassis and attaching a xlr stock. Seems like a pain in the ass to find a dealer, other than from their Canadian store |
|
|
|
|
Posted: 9/5/2016 8:56:06 AM EDT
[#1]
BTT..
Buckeye tactical and Drakes associates and Eurooptics are the only ones i am finding try finding a stock for a tikka SA 
|
|
|
|
USA
|
Posted: 9/5/2016 7:17:42 PM EDT
[#2]
Do not order through drake associates. The fucktards screwed my order up. I ended up getting mine through the Canada after the ceo of cadex contacted me after my complaint. I have the same chassis you want. It's friggin awesome. You won't regret it. There is a thread on 10t 6.5 creedmoor here you can see mine. Doesn't have my new vortex but will give you a idea. I love this chassis. I have a magpul prs on mine but thinking of putting a Luther butt stock on it.
|
|
|
|
Posted: 9/5/2016 7:24:05 PM EDT
[Last Edit: cruze5]
[#3]
Quote HistoryOriginally Posted By Bearcat24:
Do not order through drake associates. The fucktards screwed my order up. I ended up getting mine through the Canada after the ceo of cadex contacted me after my complaint. I have the same chassis you want. It's friggin awesome. You won't regret it. There is a thread on 10t 6.5 creedmoor here you can see mine. Doesn't have my new vortex but will give you a idea. I love this chassis. I have a magpul prs on mine but thinking of putting a Luther butt stock on it. what did they screw up on your order? why don't you like the Magpul buttstock? did you have to cut off part of your scope mount base? i'll def check out the thread if the picture are up |
|
|
|
USA
|
Posted: 9/5/2016 9:37:26 PM EDT
[#4]
Placed my order through Drake. Didn't hear anything for 3 weeks. When I called him, sounded like a BS blow off but said it will ship on time (6 weeks). I decided to contact cadex. Found out he didn't place the order. Was told he has done this before. I sent drake a pretty nasty email and canceled my order. Got a call from either the CEO of next one down asking if I would reconsider and they would deal with drake. I passed but they called me back next day to make a me a sweet deal to keep my order. I kept the order. The magpul works great but makes it look like a boat ore. I needed a 20 MOA rail so I could dial to 1000 yards with the scope I had. 0 MOA rail that comes with the rifle works if you have a scope with plenty if range to dial. I did have to trim the rail for the chassis to fit. Dremel to the rescue.
|
|
|
|
Posted: 9/6/2016 7:25:25 AM EDT
[#5]
Quote HistoryOriginally Posted By Bearcat24:
Placed my order through Drake. Didn't hear anything for 3 weeks. When I called him, sounded like a BS blow off but said it will ship on time (6 weeks). I decided to contact cadex. Found out he didn't place the order. Was told he has done this before. I sent drake a pretty nasty email and canceled my order. Got a call from either the CEO of next one down asking if I would reconsider and they would deal with drake. I passed but they called me back next day to make a me a sweet deal to keep my order. I kept the order. The magpul works great but makes it look like a boat ore. I needed a 20 MOA rail so I could dial to 1000 yards with the scope I had. 0 MOA rail that comes with the rifle works if you have a scope with plenty if range to dial. I did have to trim the rail for the chassis to fit. Dremel to the rescue. well so far i have an email in to Drake.. they are the only US vendor that shows the Tikka SA model on their site. what was the price difference after the Canadian price conversion? the same as what you would have paid in US? thank you for the info.. i am really diggin this stock |
|
|
|
USA
|
Posted: 9/6/2016 8:23:08 AM EDT
[#6]
Go through cadex. They will ship it through one of there distributors. Drake is one of them. Will pm you a direct contact to cadex. They should have US cost on there site.
|
|
|
|
Posted: 9/6/2016 9:36:24 AM EDT
[#7]
thank you Sir
|
|
|
|
USA
|
Posted: 9/6/2016 1:38:37 PM EDT
[#8]
Quote HistoryOriginally Posted By cruze5:
thank you Sir Your welcome. Sent pm again. Noticed my last one didn't make it. |
|
|
BC, CAN
|
Posted: 9/6/2016 6:51:27 PM EDT
[#9]
Cadex chassis systems are awesome, I have a few of them and I can't say enough good things about them.
I would love to get my hands on the Remington RACS for a comparison. As I understand it, Cadex helped Remington design their chassis system. I have an XLR Industries Carbon chassis for one of my Savages and I'd wish I'd saved my money and got a Cadex chassis instead of the XLR unit. Remington 700 in .308: 
Savage 110 in .338: 
PGW LRT-3 .50bmg 
|
|
|
|
Posted: 9/6/2016 6:55:26 PM EDT
[#10]
what height rings on the first picture? they look like seekins which is what i would probably need to repurchase 
|
|
|
|
BC, CAN
|
Posted: 9/6/2016 7:06:46 PM EDT
[#11]
Quote HistoryOriginally Posted By cruze5:
what height rings on the first picture? they look like seekins which is what i would probably need to repurchase Sorry, I don't have the exact height, they came with the Razor but the rings are Vortex Precision Match rings for a flat top. Hope that helps :( |
|
|
USA
|
Posted: 9/7/2016 7:32:50 AM EDT
[#13]
Quote HistoryOriginally Posted By Mister_Donut:
Cadex chassis systems are awesome, I have a few of them and I can't say enough good things about them. I would love to get my hands on the Remington RACS for a comparison. As I understand it, Cadex helped Remington design their chassis system. I have an XLR Industries Carbon chassis for one of my Savages and I'd wish I'd saved my money and got a Cadex chassis instead of the XLR unit. Remington 700 in .308: https://2.bp.blogspot.com/-KKLiUXBtRd8/V1JCBcNbt7I/AAAAAAAAiYE/DfcbR3bDBDwPRcnM3ECLuKcDwo0pbDVDQCKgB/s1600/P6035419.JPG Savage 110 in .338: https://1.bp.blogspot.com/-EAXjZhrc2iE/V1JBA8SUxLI/AAAAAAAAiU0/gz-q27QlsFYxUvoXsO6rptDzSAUUV0ZrgCKgB/s1600/P6035537.JPG PGW LRT-3 .50bmg https://2.bp.blogspot.com/-gOyRBBfwYDE/V1JCq6o49GI/AAAAAAAAiaY/rTuhUS7tBh4Fgqtz8ZEcJCTZzkcMzqJuACKgB/s1600/P6035364.JPG https://2.bp.blogspot.com/-kMdlN2E9eYM/V1JCJTEUqlI/AAAAAAAAiYE/jPtkScG8GnAHrW_QXNMOZYJdke8dj4npACKgB/s1600/P6035427.JPG https://3.bp.blogspot.com/-TfUo2-nULGg/V1JCSY7DNYI/AAAAAAAAiY4/VOpksG8OkP8w42Mf9q4FDKNUpQg4Xc2ywCKgB/s1600/P6035441.JPG Sweet rifles. Had a 50BMG but sold it. Waiting on savage to release the 338 stealth before which 338 Lapua I will get. |
|
|
BC, CAN
|
Posted: 9/7/2016 10:35:36 AM EDT
[#15]
Lol, they are a great chassis system, but if anyone has a Remington RACS they want to trade for comparison, I'd be game :)
More pictures of the 50 here: http://www.ar15.com/forums/t_16_16/25_The_OFFICIAL_50_CAL_Precision_Pic_thread_.html Wierd though, only the link pops up, the images don't show. |
|
|
USA
|
Posted: 9/8/2016 12:39:34 AM EDT
[Last Edit: Bearcat24]
[#16]
Here is my Savage 10T in 6.5 Creedmoor and Cadex OT Core and Magpul PRS. Awesome chassis for the money. Current picture has a SWFA SS 20X but changed it for a Vortex HS-T 6X24-50.
|
|
|
KS, USA
|
Posted: 9/9/2016 11:09:25 AM EDT
[#17]
I want a Dual Strike, but damn they are expensive.
|
|
|
|
Posted: 9/9/2016 11:16:14 AM EDT
[Last Edit: cruze5]
[#18]
Quote HistoryOriginally Posted By m6z:
I want a Dual Strike, but damn they are expensive. i am waiting to hear from a dealer on pricing and availability . the AIC AT will be released in the next few months for the Tikka platform, and they included a AIC mag.. i already have one AIC that i am happy with, plus that extra mag included would be nice decisions decisions |
|
|
|
|
Posted: 9/9/2016 12:44:05 PM EDT
[Last Edit: Lennyo3034]
[#19]
For those that own these: What do you think of the how the tube mounts to the chassis portion? It looks to me like the two brackets on the sides hold it on and I'm not sure how solid that is. Is there any flex at that joint? What are the brackets made of?
I think the Cadex chassis is the best looking chassis made and am considering one to replace my X-ray. |
|
|
|
USA
|
Posted: 9/10/2016 10:23:54 AM EDT
[#20]
The two pieces that hold the tube is solid. Zero slop. Torqued to spec and your gtg. I have no regrets getting mine.
Just a FYI, the savage ashberry will be released soon (supposed to anyways). |
|
|
|
Posted: 9/11/2016 8:12:15 AM EDT
[Last Edit: cruze5]
[#21]
so tell me about the compatible magazines.. i assume out of the box it is initially AIC only?
they say sleeves are available for other magazines does it include any others? Will the LR/SR GEN M3 Pmags work without additional sleeves? one thing is for sure. they are not very good at documentation |
|
|
|
USA
|
Posted: 9/11/2016 9:37:14 AM EDT
[#22]
Quote HistoryOriginally Posted By cruze5:
so tell me about the compatible magazines.. i assume out of the box it is initially AIC only? they say sleeves are available for other magazines does it include any others? Will the LR/SR GEN M3 Pmags work without additional sleeves? one thing is for sure. they are not very good at documentation AIC mags only unless you get the sleeves. I ordered the magpul AIC mags and they work great. |
|
|
|
Posted: 9/14/2016 8:00:56 AM EDT
[Last Edit: cruze5]
[#23]
i have to say i FULLY regret purchasing this stock.
1. i got the field tactical from EuroOptics after trying to com with two other dealers recommended by Cadex. i have YET to hear from either of them on a quote. EuroOptics replied in less than two hours. that should have been my first warning sign this was going to be a disaster 2. if you have a Tikka t3x CTR. you have now been forewarned... you must remove the epoxied / glued down 0MOA rail in order to use this chasis. i called my local gunsmith and he didn't want to have anything to do with this.. so i took to google and luckily found that someone had used a clothing iron for 30 minutes directly to the rail to heat it up. and then was able to pry the rail off. this worked. 3. half the the screws stripped using the correct torx bits and correct torque settings  i now see why it came with so many extra screws
4. my AIC mags DO NOT FIT!! these mags are from a McMillian A5 stock with a badger mag system.. they are too wide?! that means at least another 35 bucks for at least a mag. there is more but my head hurts 
so in order of my favorite. McMillian a5 KRG xray AIC AT Cadex |
|
|
|
USA
|
Posted: 9/14/2016 4:50:01 PM EDT
[#24]
Before I ordered my cadex chassis, I researched to find others who put one on a savage to ask questions. When I had the right info, then I ordered. As far as your rail being glued, thats on tikka, not cadex. Cadex just started not long ago selling chassis's to commercial market. Most of there business is military. Anytime your messing with the rail screws, these little bastards strip easy. You use locktite and screw in just enough pressure to seat the screw. I messed one up on my savage. chalk it up to a learning experience and drive on.
|
|
|
BC, CAN
|
Posted: 9/15/2016 11:53:02 AM EDT
[#25]
Quote HistoryOriginally Posted By Bearcat24:
Before I ordered my cadex chassis, I researched to find others who put one on a savage to ask questions. When I had the right info, then I ordered. As far as your rail being glued, thats on tikka, not cadex. Cadex just started not long ago selling chassis's to commercial market. Most of there business is military. Anytime your messing with the rail screws, these little bastards strip easy. You use locktite and screw in just enough pressure to seat the screw. I messed one up on my savage. chalk it up to a learning experience and drive on. A lot of people were running into issues with the factory rail on their Savage 10TRs (nothing to do with Cadex), so apparently this happens with more than just a few manufacturers. Some guys were lucky (like me) where the rail screws came out easily, others had to use heat guns to loosen up the loctite or whatever they use at the factory. |
|
|
USA
|
Posted: 9/15/2016 4:20:36 PM EDT
[#26]
I had to shave off a little of the rail to make it fit on my 10T. Practiced with the original so when my 20 MOA rail came in, I knew how much to trim off. Cadex chassis's are solid and would recommend them to anyone. Just have to do your homework first to see what needs to be done to make it fit.
|
|
|
|
Posted: 9/17/2016 10:33:33 AM EDT
[Last Edit: cruze5]
[#27]
gents im going to pass this by you before i call eurooptics:
i have now bought the magazine: midway purchase and it still doesn't fix in the cadex stock. what am i doing wrong? 
EDIT NM this stock will only work with the Tikka T3 mags My T3x 260 mag will not work....
how much extra was the different magazine sleeves? they are not listed on the website anywhere that i have found 2nd EDIT after my range trip 
|
|
|
|
USA
|
Posted: 9/26/2016 1:28:17 PM EDT
[#29]
I am using the mags you linked. Should work fine. Cadex did not test these mags with there chassis so not cleared for approval. Guess I got lucky or something is t quite right with yours.
|
|
|
BC, CAN
|
Posted: 9/26/2016 3:22:42 PM EDT
[#30]
Quote HistoryOriginally Posted By AEROMechanic:
Nice rifles...do they make that .50 in a LH version? Quote HistoryOriginally Posted By AEROMechanic:
Originally Posted By Mister_Donut:
Cadex chassis systems are awesome, I have a few of them and I can't say enough good things about them. I would love to get my hands on the Remington RACS for a comparison. As I understand it, Cadex helped Remington design their chassis system. I have an XLR Industries Carbon chassis for one of my Savages and I'd wish I'd saved my money and got a Cadex chassis instead of the XLR unit. Remington 700 in .308: https://2.bp.blogspot.com/-KKLiUXBtRd8/V1JCBcNbt7I/AAAAAAAAiYE/DfcbR3bDBDwPRcnM3ECLuKcDwo0pbDVDQCKgB/s1600/P6035419.JPG Savage 110 in .338: https://1.bp.blogspot.com/-EAXjZhrc2iE/V1JBA8SUxLI/AAAAAAAAiU0/gz-q27QlsFYxUvoXsO6rptDzSAUUV0ZrgCKgB/s1600/P6035537.JPG PGW LRT-3 .50bmg https://2.bp.blogspot.com/-gOyRBBfwYDE/V1JCq6o49GI/AAAAAAAAiaY/rTuhUS7tBh4Fgqtz8ZEcJCTZzkcMzqJuACKgB/s1600/P6035364.JPG https://2.bp.blogspot.com/-kMdlN2E9eYM/V1JCJTEUqlI/AAAAAAAAiYE/jPtkScG8GnAHrW_QXNMOZYJdke8dj4npACKgB/s1600/P6035427.JPG https://3.bp.blogspot.com/-TfUo2-nULGg/V1JCSY7DNYI/AAAAAAAAiY4/VOpksG8OkP8w42Mf9q4FDKNUpQg4Xc2ywCKgB/s1600/P6035441.JPG Nice rifles...do they make that .50 in a LH version? Not sure, I've never seen one. |
|
|
BC, CAN
|
Posted: 9/26/2016 11:22:43 PM EDT
[#31]
Love mine
|
|
|
USA
|
Posted: 9/27/2016 3:52:21 PM EDT
[#32]
Quote HistoryOriginally Posted By DILLIGAF_CANADA:
Love mine https://scontent-sea1-1.xx.fbcdn.net/v/t1.0-9/12359910_10153831120148552_4422078511245863944_n.jpg?oh=54d344e6d6ac627bc5e83ffbad7bc642&oe=5873A87A That looks PURDY! Enjoying mine too! |
|
|
|
Posted: 10/1/2016 5:36:04 PM EDT
[Last Edit: cruze5]
[#33]
so i acquired some 308 Tikka extended magazines( the ONLY magazines that will work with this rifle) and this rifle will fire one round, the back of magazine drops down and won't feed another round.
i've emailed Cadex to see if there is a good solution to this issue $1380 dollars for this chassis? |
|
|
|
|
Posted: 10/2/2016 9:01:53 AM EDT
[#34]
Kind of off topic but what type of rubber over mould pistol grip do they use? I was handling a Cadex chassis at the range and that is the AR pistol grip I want to use if I ever put one on a precision rifle build.
Oh and the owner said he loved the chassis. You can probably get them for 25% off the Canadian proce with the low dollar. |
|
|
|
|
Posted: 10/2/2016 12:08:54 PM EDT
[#35]
Quote HistoryOriginally Posted By Roddy556:
Kind of off topic but what type of rubber over mould pistol grip do they use? I was handling a Cadex chassis at the range and that is the AR pistol grip I want to use if I ever put one on a precision rifle build. Oh and the owner said he loved the chassis. You can probably get them for 25% off the Canadian proce with the low dollar. its this |
|
|
|
USA
|
Posted: 10/2/2016 6:31:28 PM EDT
[#36]
Did you get a reply back? When I bought mine for my savage 10T, was told AICS mags only. Magpul wasn't on the list yest but tried it anyways. Works. I didn't buy any sleeves either. Going to try a savage mag just to see if it works. What model of chassis is that?
|
|
|
|
Posted: 10/2/2016 8:17:09 PM EDT
[#37]
I have not heard back from them, it's the tikka model listed on the eurooptics site
This model the the extended tikka mags only model |
|
|
|
|
Posted: 10/3/2016 6:52:56 AM EDT
[#38]
Quote HistoryQuote HistoryOriginally Posted By cruze5:
Originally Posted By Roddy556:
Kind of off topic but what type of rubber over mould pistol grip do they use? I was handling a Cadex chassis at the range and that is the AR pistol grip I want to use if I ever put one on a precision rifle build. Oh and the owner said he loved the chassis. You can probably get them for 25% off the Canadian proce with the low dollar. its this Thanks! Europtioc is selling complete Cadex rifles as well if someone wants more than just a chassis. |
|
|
|
USA
|
Posted: 10/3/2016 11:30:45 AM EDT
[#39]
What caliber is your rifle? Was looking over your chassis on cadex web site. From what I read, you can use your mags but not sure. I see there is options for different magazines but of course it costs more. Weird your having mag issues.
|
|
|
BC, CAN
|
Posted: 10/3/2016 1:07:23 PM EDT
[#40]
Shooting my Savage 110 388lm for the first time:
Reached out to about 850m with with ease, will go for further next time. My 700 in .308, also little difficulty reaching out to 850m: 
Our range for the day: 
|
|
|
|
Posted: 10/3/2016 2:07:07 PM EDT
[Last Edit: cruze5]
[#41]
Quote HistoryOriginally Posted By Bearcat24:
What caliber is your rifle? Was looking over your chassis on cadex web site. From what I read, you can use your mags but not sure. I see there is options for different magazines but of course it costs more. Weird your having mag issues. an update. the Senior sales manager has been in touch with me. later this evening i am sending over the serial number and some pictures. he is going out today to get a T3x rifle in their hands to see if that might be the issue. I am using a Tikka t3x CTR. 260 Remington originally i would have paid more to be able to use a sleeve for AIC mags. now that I have spent 90 dollars in mags i don't want to go that route. as far as i am concerned anyone that buys this chassis will have this same issue. so i hopefully i can get them the information they need to modify the lower mag well. then i am guessing send me a replacement. not really sure what will happen but they are looking into it for me great pictures. i really like the looks of this rifle. i really went the long route building mine up the way i did... it is still cheaper than buying one prebuilt from Cadex
|
|
|
|
USA
|
Posted: 10/3/2016 6:24:25 PM EDT
[#42]
Just looked at cadex web site and your chassis. Your caliber is not listed from what I can tell. Take a look and see if you find something different.
Cadex |
|
|
|
Posted: 10/3/2016 7:10:09 PM EDT
[#43]
Quote HistoryOriginally Posted By Bearcat24:
Just looked at cadex web site and your chassis. Your caliber is not listed from what I can tell. Take a look and see if you find something different. Cadex A 260 is a 308 case necked down to a 264 caliber. You use 308 mags essentially |
|
|
|
|
Posted: 10/3/2016 8:25:10 PM EDT
[#44]
There are multiple posts on Snipershide about Magpul AICS magazines not working with Tikka rifles unless modified so that may the issue. Factory Accuracy International or Accurate Mag AICS magazines seem to function fine though.
|
|
|
|
|
Posted: 10/3/2016 8:59:22 PM EDT
[Last Edit: cruze5]
[#45]
here is my video to them Link
When you fire a round, the back of the magazine falls down like shown, you can't feed another round it either double feeds or scraps up your brass |
|
|
|
USA
|
Posted: 10/3/2016 9:48:40 PM EDT
[#46]
Quote HistoryOriginally Posted By cruze5:
A 260 is a 308 case necked down to a 264 caliber. You use 308 mags essentially Quote HistoryOriginally Posted By cruze5:
Originally Posted By Bearcat24:
Just looked at cadex web site and your chassis. Your caliber is not listed from what I can tell. Take a look and see if you find something different. Cadex A 260 is a 308 case necked down to a 264 caliber. You use 308 mags essentially I know that since I used my magazines from my 10T 308 in my 10T 6.5 creedmoor before I changed the chassis. There site seems very specific on calibers but you would think it should work. |
|
|
|
Posted: 10/6/2016 8:43:26 PM EDT
[Last Edit: cruze5]
[#48]
so to update everyone on this. We think we have found the issue but first
1. Eurooptics has been on top of this since I first reported the issue. they will certainly be getting more of my business when I purchase equipment 2. Cadex and their staff have been helpful and patient working with myself and EuroOptics. I've been upset with them thinking it was their chassis, but after what I learned today it probably is NOT the case it appears the NEW t3x CTR out of the box WILL NOT work with the Cadex chassis that uses the Tikka extended magazines, if you spent 2k on the AIC version you should be fine.. the regular t3 with the Extended magazines has a silver metal piece that holds the magazine into the magwell. this so far explains why my magazine is so loose.... Europtics is going to see if they can order the part that attaches to the trigger housing and we will go from there |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
