User Panel
User Panel
User Panel
|
Posted: 11/15/2022 1:54:23 PM EST
https://soldiersystems.net/2022/11/15/introducing-the-recc%C2%B7e-carbine-stock-by-reptilia/
After more than two years of development and testing, Reptilia is proud to announce the RECC·E Stock for AR15/M16 and AR10/SR25 pattern rifles. Designed at the request of a military end user, the RECC·E Stock features a constant cheek weld, ambidextrous QD sling attachment points, rubber buttpad, and a modular design that allows usage of a standard AR15 carbine buffer system, or A5/SR25 carbine buffer system by replacing the receiver extension (buffer tube) and forward portion of the stock. Weighing only 12.0 ounces including the proprietary AR15-length receiver extension, the RECC·E stock is the ideal lightweight solution for the entire spectrum of AR-pattern guns from compact to precision. Technical Specifications: • Proprietary Receiver Extension: 7075-T6 Aluminum, Type III Milspec Anodized Finish • Materials: Impact Modified, Glass-Filled Nylon Polymer • Weight (AR15/M16): 12.0 oz. • Weight (AR10/SR25): 12.7 oz. • Length of Pull (AR15/M16): 10.8 in. – 14.2 in. • Length of Pull (AR10/SR25): 11.6 in. – 15.0 in.  
|
|
|
|
Posted: 11/15/2022 1:56:41 PM EST
[#1]
Neat.
|
|
|
|
Posted: 11/15/2022 1:57:32 PM EST
[#2]
Quote HistoryQuoted: Neat. |
|
|
|
Posted: 11/15/2022 1:57:46 PM EST
[#3]
Pretty similar to a UBR without all of the weight. Looks like a winner.
|
|
|
|
Posted: 11/15/2022 2:00:49 PM EST
[#4]
I don't think $160 is absurd for a stock but it's also not cheap.
|
|
|
|
Posted: 11/15/2022 2:01:13 PM EST
[#5]
|
|
|
|
Posted: 11/15/2022 2:03:06 PM EST
[#6]
Quote HistoryQuoted: I don't think $160 is absurd for a stock but it's also not cheap. Cheaper than my LMT SOPMOD. |
|
|
|
Posted: 11/15/2022 2:03:37 PM EST
[#7]
No castle nut? Just looking at the pic, maybe I’m wrong, but I like it.
|
|
|
|
Posted: 11/15/2022 2:04:05 PM EST
[#8]
Quote HistoryQuoted: Pretty similar to a UBR without all of the weight. Looks like a winner. And shorter which I like. As a 5’9” manlet I can’t square up with a UBR even fully collapsed. |
|
|
|
Posted: 11/15/2022 2:04:21 PM EST
[#9]
Lame. Anything beyond a CAR stock is unnecessary.
|
|
|
|
Posted: 11/15/2022 2:04:52 PM EST
[#10]
Quote HistoryQuoted: Cheaper than my LMT SOPMOD. B5 is the exact same stock for like $80 cheaper |
|
|
|
Posted: 11/15/2022 2:05:19 PM EST
[#11]
Cool, but I just want someone to make me an adjustable rifle length extension that I can use a carbine stock on. I usually run my stocks in the middle anyways, and love the recoil impulse of the longer spring. As usual, I'm the only person on earth that wants a thing. A1Stocks4Lyfe.
|
|
|
|
Posted: 11/15/2022 2:06:29 PM EST
[#12]
That's kinda neat.
|
|
|
|
Posted: 11/15/2022 2:06:29 PM EST
[#13]
No single point sling QD cup? That might be a deal breaker for the rifle I would put this on. It looks solid though.
|
|
|
|
Posted: 11/15/2022 2:06:34 PM EST
[#14]
A UBR?
|
|
|
|
Posted: 11/15/2022 2:07:48 PM EST
[#15]
|
|
|
|
Posted: 11/15/2022 2:08:06 PM EST
[#16]
'Includes our proprietary carbine length receiver extension “buffer tube”'
I think I will pass. |
|
|
|
Posted: 11/15/2022 2:08:48 PM EST
[#17]
Quote HistoryQuoted: A UBR? At nearly half the weight, according to the manufacturer's claim. Magpul lists their UBR w/ receiver extension at 21.2 ounces. This thing is listed as "Weighing only 12.0 ounces including the proprietary AR15-length receiver extension" |
|
|
|
Posted: 11/15/2022 2:10:41 PM EST
[#18]
Quote HistoryQuoted: At nearly half the weight, according to the manufacturer's claim. Magpul lists their UBR w/ receiver extension at 21.2 ounces. This thing is listed as "Weighing only 12.0 ounces including the proprietary AR15-length receiver extension" It’s more like the Zukov AK stock now that I look at it. |
|
|
|
Posted: 11/15/2022 2:14:02 PM EST
[#19]
Quote HistoryQuoted: thats because LMT. B5 is the exact same stock for like $80 cheaper Quote HistoryQuoted: Quoted: Cheaper than my LMT SOPMOD. B5 is the exact same stock for like $80 cheaper Yup, I picked up 6 B5 stocks last BF for $40 each from Primary Arms |
|
|
|
Posted: 11/15/2022 2:14:32 PM EST
[#20]
Quote HistoryQuoted: It’s more like the Zukov AK stock now that I look at it. I think you're right. It does look heavily inspired by the Zhukov moreso than the UBR. Looks like they took a Zhukov, shaped it around a buffer tube, and then hollowed out the material on the extending bit to accommodate. Well, neat. Good to see more options on the market. |
|
|
|
Posted: 11/15/2022 2:16:32 PM EST
[#21]
I like it, that looks comfortable, practical, and also aesthetically nice.
|
|
|
|
Posted: 11/15/2022 2:18:50 PM EST
[#22]
Huh.
I like that. |
|
|
|
Posted: 11/15/2022 2:21:49 PM EST
[#23]
Moon boot Jr
|
|
|
|
Posted: 11/15/2022 2:28:14 PM EST
[#24]
Quoted: Lame. Anything beyond a CAR stock is unnecessary. TrumpWrong.gif SOPMOD is the answer… but this stock looks mighty nice for a SPR/RECCE if the lockup is there. Quoted: 'Includes our proprietary carbine length receiver extension “buffer tube”' I think I will pass. why? Pull old receiver extension off and reuse on new build or recoup money in the EE. |
|
|
|
Posted: 11/15/2022 2:29:52 PM EST
[#25]
How am I supposed to buttstroke someone with that?
|
|
|
|
Posted: 11/15/2022 2:30:54 PM EST
[#26]
|
|
|
|
Posted: 11/15/2022 2:31:42 PM EST
[#27]
Quote HistoryQuoted: No single point sling QD cup? That might be a deal breaker for the rifle I would put this on. It looks solid though. QD cup is there. |
|
|
|
Posted: 11/15/2022 2:31:44 PM EST
[#28]
I like it.
|
|
|
|
Posted: 11/15/2022 2:32:59 PM EST
[#29]
Nice. May have to snag one.
|
|
|
|
Posted: 11/15/2022 2:34:48 PM EST
[#30]
Quote HistoryQuoted: I think you're right. It does look heavily inspired by the Zhukov moreso than the UBR. Looks like they took a Zhukov, shaped it around a buffer tube, and then hollowed out the material on the extending bit to accommodate. Well, neat. Good to see more options on the market. It is neat, solves the beard pinch too. I’d like to compare to my Sopmods. Those already beat the CTR for sure. |
|
|
|
Posted: 11/15/2022 2:36:13 PM EST
[#31]
Quote HistoryQuoted: Looks like a cross between a UBR and a Zhukov (Magpul adjustable AK stock). https://www.ar15.com/media/mediaFiles/71141/5C9C60E6-5F59-448A-9F55-D713EC9DB72E_png-2601035.JPG Thought it looked like a magpul knock-off. Over/under on magpul suing them? |
|
|
|
Posted: 11/15/2022 2:36:35 PM EST
[#32]
Looks like an improved pirate leg.
|
|
|
|
Posted: 11/15/2022 2:37:53 PM EST
[#33]
Quote HistoryQuoted: QD cup is there. Where is it? I see the one in the back but I would like one right where the endplate would be on a traditional AR stock. |
|
|
|
Posted: 11/15/2022 2:39:26 PM EST
[#34]
I like it except for the sling mount location.
|
|
|
|
Posted: 11/15/2022 2:40:02 PM EST
[#35]
There is a comment section at the bottom.
also not seeing the point of this but looks cool |
|
|
|
Posted: 11/15/2022 2:40:30 PM EST
[#36]
|
|
|
|
Posted: 11/15/2022 2:40:39 PM EST
[#37]
Huh. I kinda dig that.
|
|
|
|
Posted: 11/15/2022 2:42:59 PM EST
[#38]
Quote HistoryQuoted: Pretty similar to a UBR without all of the weight. Looks like a winner. looks that way |
|
|
|
Posted: 11/15/2022 2:43:47 PM EST
[#39]
ugly as sin
|
|
|
|
Posted: 11/15/2022 2:44:07 PM EST
[#40]
So, no more whiskers getting ripped out of your face?
|
|
|
|
Posted: 11/15/2022 3:29:29 PM EST
[#41]
Quote HistoryQuoted: Yup, I picked up 6 B5 stocks last BF for $40 each from Primary Arms Quote HistoryQuoted: Quoted: Quoted: Cheaper than my LMT SOPMOD. B5 is the exact same stock for like $80 cheaper Yup, I picked up 6 B5 stocks last BF for $40 each from Primary Arms 
|
|
|
|
Posted: 11/15/2022 3:32:23 PM EST
[#42]
Quote HistoryQuoted: Cool, but I just want someone to make me an adjustable rifle length extension that I can use a carbine stock on. I usually run my stocks in the middle anyways, and love the recoil impulse of the longer spring. As usual, I'm the only person on earth that wants a thing. A1Stocks4Lyfe. Have you tried an A5 length tube, rifle spring, and VLTR buffer? That's what I did on my rifle caliber ARs. I have no interest in this stock though since it's only a carbine length tube. |
|
|
|
Posted: 11/15/2022 3:33:50 PM EST
[#43]
Quote HistoryQuoted: And shorter which I like. As a 5’9” manlet I can’t square up with a UBR even fully collapsed.  Attached File |
|
|
|
Posted: 11/15/2022 3:38:26 PM EST
[#44]
Quote HistoryQuoted: 'Includes our proprietary carbine length receiver extension “buffer tube”' I think I will pass. Quote HistoryQuoted: 'Includes our proprietary carbine length receiver extension “buffer tube”' I think I will pass. Per their website it appears the proprietary buffer tube is for A5/SR-25 variants, it's sort of confusing the way it's worded though. ... and a modular design that allows usage of a standard AR15 carbine buffer system, or A5/SR25 carbine buffer system by replacing the receiver extension (buffer tube) and forward portion of the stock. |
|
|
|
Posted: 11/15/2022 4:23:14 PM EST
[#45]
I saw the title and thought “Yeah, nothing is going to beat the UBR on *my* RECCE.”
This thing looks awesome (UBR minus the weight). |
|
|
|
Posted: 11/15/2022 4:27:19 PM EST
[#46]
That looks cool but pricey
|
|
|
|
Posted: 11/15/2022 4:36:11 PM EST
[#47]
Quote HistoryQuoted: Per their website it appears the proprietary buffer tube is for A5/SR-25 variants, it's sort of confusing the way it's worded though. Quote HistoryQuoted: Quoted: 'Includes our proprietary carbine length receiver extension “buffer tube”' I think I will pass. Per their website it appears the proprietary buffer tube is for A5/SR-25 variants, it's sort of confusing the way it's worded though. ... and a modular design that allows usage of a standard AR15 carbine buffer system, or A5/SR25 carbine buffer system by replacing the receiver extension (buffer tube) and forward portion of the stock. Looks to me the whole thing is proprietary just like a UBR. But they have an A5 length one coming out alongside the AR-15 one. There are certainly worse choices for a new build. But who is making a new build right now. That said I kinda want one. |
|
|
|
Posted: 11/15/2022 4:50:26 PM EST
[#48]
Neat.
I've got several UBRs. The only thing I don't like about them is the weight. Which this appears to solve... |
|
|
|
Posted: 11/15/2022 4:55:14 PM EST
[#49]
I like it. I have a AR-10 that would look good on.
|
|
|
|
Posted: 11/15/2022 5:01:28 PM EST
[#50]
That’s hot.
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File