User Panel
Posted: 11/24/2018 9:49:10 AM EDT
[Last Edit: ARogueNinja]
This thread will be dedicated to builds and discussions of the FBI clones and thanks to Geissele for listening to the masses and releasing the much coveted rail. Parts lists will be updated as we go. Please keep it on topic and post pictures of your builds and "in the wild" photos.
Barrel: Colt 11.5" barrels & others since there was already a mix of stuff out there between the different offices, prior to the upgrade starting. Lower: Colt/ some older DOJ contract RRA lowers, among others. Grip: ERGO/ Hogue/ A2 Upper: Most of the uppers appear to be Colt marked. Rail: Troy and Geissele, seems like the main colors for the MK4 rail are Black and OD, unsure of the others. Flash hider: A2 flashhiders/ Surefire/ KAC NT4 Optics: Aimpoint H1/T1s & H2/T2s are approved, along with the Daniel Defense mounts. The Sig Romeo4 red dot was also approved and is being used by some other federal agencies too. Spuhr mounts for Aimpoints for HRT guns. EOTech EXPS 3 & G33 Magnifier Sights: Troy BUIS/ Magpul MBUS Laser: L3 AN/ PEQ 15 Stock: CTRs Sling: VTAC 2 points/ Magpul MS Light: WMLs/ Surefire Scout More info here: Industry Thread Originally Posted By mbpike: Originally Posted By GS5414: Alright homies. I'm going to drop some knowledge, and then ghost. Folks generally got a handle on the right parts. Right now, the FBI has stopped throwing out their T2s/Spuhr mounts because folks are starting to regret replacing them with the ROMEO RDS. Things aren't holding up to abuse and long life. Who knew. You'll see the Aimpoint make a comeback. Also, nobody in this thread has the right gas block. Geissele gas blocks are used on the FBI guns, but they are port restricted gas blocks, as in the ports aren't drilled all the way out. We used them in the USMC for some of the souped up M4s, at both 0.072" restricted for 14.5" guns (a bit too small), and 0.068" restricted for 10.3" guns. The FBI uses 0.067" restricted blocks. I think I have one of them stashed away that I never managed to use - might take a photo of it if I can find it. They do a good job keeping gas port erosion from affecting function of the guns as the barrels burn out. Keeps carrier speeds lower, recoil is a bit softer. They are not sold commercially, or even talked about for that matter. If you want the same function, take a G block and thread it for a BRT Micro Tune 0.067" port insert. I'm out. S/F View Quote Lets get this added to the OP. View Quote Originally Posted By elucidate: Not a clone. Large regional SWAT. Skinny commando barrel. Originally Posted By elucidate: Indeed. When I said 'not a clone' by that I meant it's a picture of a real upper, sat on a desk in a large regional FBI training facility, not something I made at home. View Quote Originally Posted By 3ACR_Scout: Originally Posted By AZgunner: I haven't decided if I'm doing the clone correct green rail, or if I'll do the same setup but in all black. It depends on where I'm at in a few months. If I need to give my current rifle back and use the FBI clone on duty, I need to do it in black, as only all black color schemes are currently authorized. View Quote A black rifle can be completely clone correct, it would just represent a regular agent's rifle, not HRT or Regional SWAT. This thread started as a result of the interest in the green Geissele Mk4 handguards that showed up on Regional SWAT rifles, but all four Geissele colors are in use by the FBI. People are just (understandably) a bit fixated on the green ones because they look great. That's led to what a lot of people are doing, which is combining the features of the HRT and SWAT rifles into a mixed clone (SWAT green handguard and CTR stock, HRT heavy barrel, and Spuhr HRT Aimpoint mount). I think it would be great if @ARogueNinja could update the original post to reflect the four FBI variants that are out there (these details are incomplete and could be a little off): HRT: DDC Mk4 handguard, 11.5" Colt HRT heavy barrel, Aimpoint T-2 on Spuhr mount (not sure about the stock), black or FDE(?) CTR or Colt stock Regional SWAT: OD Green Mk4 handguard, 11.5" Colt LE6933 government profile barrel, Aimpoint T-2 on Daniel Defense mount, OD green CTR or Colt stock Vehicle Teams: Grey Mk4 handguard, 11.5" Colt LE6933 government profile barrel, Sig Romeo, FAB Defense PTK AFG, Maxim Defense collapsible stock https://www.ar15.com/media/mediaFiles/1182/green___grey_M4_carbines_jpg-1584398.JPG Field Agent: Black Mk4 handguard, 11.5" Colt LE6933 government profile barrel, Aimpoint T-2 on Daniel Defense mount or Sig Romeo, black CTR or Colt stock I think this is a grey Mk4 issued to hrt4me but is (I believe) representative of the standard agent rifle configuration. I don't recall seeing any photos in this thread of a regular agent's carbine: https://i.imgur.com/A6UVttH.jpg View Quote |
|
BRD- Clone Diseased w/ a possible case of NFAIDS, and a serious case of KAC...
WTB: KAC Vero Marked MRE |
IN ON 1!!!
I ordered 4 of the Federal rails. a DDC, Gray, 2 x ODG. The DDC is going on my current gun to replace my MK4 9.5", the Gray is going on a 12.5" project I'm going to start soon, and well the ODG rails (at least 1 of them) is going to be a very very very slowly built FBI Regional Gun. ETA: Fucking missed page 1. |
|
|
BRD- Clone Diseased w/ a possible case of NFAIDS, and a serious case of KAC...
WTB: KAC Vero Marked MRE |
Originally Posted By ARogueNinja:
Armorers remove the auto sear to make it semi only, it's SOP for a lot of police departments as well. View Quote View All Quotes View All Quotes |
|
"When a man knows he is to be hanged in a fortnight, it concentrates his mind wonderfully." - Dr. Samuel Johnson
|
|
Originally Posted By mbpike:
Dogs aren't as big as they used to be.... View Quote View All Quotes View All Quotes Originally Posted By mbpike:
Originally Posted By BurtSaun1049:
They used to have the sear. Great thread! Lets keep the info flowing. I plan on doing a clone build with mine. |
|
commtechforums.net
“An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." - Lt.Col. Jeff Cooper |
Any of these guys ever running 14.5" barrels? I ordered one of the MK16 rails and charging handles in OD Green. I don't live in a state where I can have SBRs, so if I clone, it's gotta be 14.5".
|
|
|
|
|
Originally Posted By OlacAttack:
@HCM3156 so something like this FBI Build Lower Receiver: Colt Stock: Magpul CTR Black/ODG Pistol Grip: Hogue Rubber Grip with Finger Grooves Black (no dovetail) Rear Sling Plate: Upper Receiver: Mil-spec forged M4 Barrel: 11.5 Colt heavy Rail: Geiselle MK4 Federal ODG Rear BUIS: Troy (black) Front Sight: Troy (black) Front Sling Attachment: Muzzle Device: A2 Birdcage Optic: Romeo 4M or Aimpoint T2 w DD micro mount View Quote The Romoes use their own mount. DD is only for Aimpoints. The guns were comimg with the houge now the ergo. Either would be correct. Likely a mix of personal preference and/ or what ever is handy when the armorers put it together. |
|
|
Originally Posted By BurtSaun1049:
Surefire rails with Inforce WMLs, PEQ-2s, LMT rear sight, Eotech (unsure what model, but looked like 552s). Guns were camo spray-painted in my AO. I'm also unsure of bbl profile, but they were the 11.5" barrels with FSP. SWAT guys had Colt full auto lowers, regular agents who did not have an MP5 in 9mm or 10mm had RRA ARs that were a true mixed bag in terms of setups. SWAT guys also had Springfield Professional 1911s, although must carried the G22s at the time (now replaced with 9mm guns). *ETA: another pic of current guns. https://i.imgur.com/9vvYnw7.png Quasi-pic of how they used to look, minus the 11.5" bbl https://i.imgur.com/PPASmnS.png View Quote The SWAT guns are full autos but they have the option of Geissele triggers. I was told some guys don’t want the Geissele because you lose the auto capability. My own work gun has 3 round burst and I would gladly swap that for an SSA but to each their own. There are still 1911 and G21 POW s around but for team stuff it is green 17 only. |
|
|
Originally Posted By StevieJ309:
Looks like it's missing. View Quote View All Quotes View All Quotes Originally Posted By StevieJ309:
Originally Posted By CWied:
Originally Posted By BurtSaun1049:
Not that I want to disclose *ETA: nvm, I delivered https://i.imgur.com/WEvmKqX.jpg?1 |
|
|
These clone threads are killing me! I literally just received the last parts for my MK18 Mod 0. I ordered 2 rails Greed and DDC. I have one of the anodized colts that the OD should look great on!
Lol and SBR all things! |
|
Its to late for the boots, save your watch!
|
|
Originally Posted By HCM3156:
The SWAT guns are full autos but they have the option of Geissele triggers. I was told some guys don’t want the Geissele because you lose the auto capability. View Quote |
|
|
Got tracking info for my OD rail! Got a nos colt OD 4 pos coming too, this was a great BF!
|
|
|
|
|
I've got tracking for my MK4, but it has not been shipped yet. Ordered in the early minutes of the first offering.
|
|
|
|
|
Originally Posted By M4A1SOPMOD:
When the feds show up to confiscate your guns and yall got the same rifle... https://i.imgur.com/HAD0DZj.jpg View Quote |
|
commtechforums.net
“An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." - Lt.Col. Jeff Cooper |
So for those doing this, just stripping off the FSB and set screwing the G block?
I hate having that stupid front pin hole exposed when the FSB is removed, almost as much as I hate relying solely on set screws on a non-dimpled barrel. Thinking of just shaving the FSB and calling it a day. |
|
|
Absence of proof is not proof of absence.
KY, USA
|
Originally Posted By Marksman14:
So for those doing this, just stripping off the FSB and set screwing the G block? I hate having that stupid front pin hole exposed when the FSB is removed, almost as much as I hate relying solely on set screws on a non-dimpled barrel. Thinking of just shaving the FSB and calling it a day. View Quote |
If you aren't representing Jesus in a way that makes people want to hang out with you, you're doing it wrong.
|
|
Absence of proof is not proof of absence.
KY, USA
|
Originally Posted By Marksman14:
I know, still bothers me. I know it shouldn't but its a pet peeve. View Quote View All Quotes View All Quotes |
If you aren't representing Jesus in a way that makes people want to hang out with you, you're doing it wrong.
|
Originally Posted By Marksman14:
I know, still bothers me. I know it shouldn't but its a pet peeve. View Quote View All Quotes View All Quotes Originally Posted By Marksman14:
Originally Posted By Sputnik556:
The holes for the FSB should be well under the rail. This is why the non FSB drilled barrels will probably bring a premium. |
|
Its to late for the boots, save your watch!
|
Originally Posted By kells81: The Larue GB may cover them. This is why the non FSB drilled barrels will probably bring a premium. View Quote |
|
|
Originally Posted By Marksman14:
Any idea where those can be found? I do like "clone" type builds, but I won't sacrifice functionality or build quality just to get one "right". I'm thinking I'll just shave the FSB and call it a day. View Quote View All Quotes View All Quotes Originally Posted By Marksman14:
Originally Posted By kells81: The Larue GB may cover them. This is why the non FSB drilled barrels will probably bring a premium. |
|
Its to late for the boots, save your watch!
|
Think i have everything i need for the setup im going for except for the 11.5 Colt fbi barrel
Colt LE carbine lower Colt upper Colt ch Colt bcg Magpul CTR stock Troy folding front & rear buis Colt od buffer tube Ergo pistol grip Aac 51t for m4000 suppressor Geissele od rail EOTech EXPS 3 G33 Magnifier Vtac 2 point od No wml ordered yet. Im drained |
|
#JusticeforFelipe
#PoultrylivesMatter |
So which thread is the official thread now? This one?
Or this one? Maybe this one? Maybe the original? |
|
We can't medicate man to perfection again
We can't legislate peace in our hearts We can't educate sin from our souls Its been there from the start |
Originally Posted By seamasterpro:
So which thread is the official thread now? This one? Or this one? Maybe this one? Maybe the original? View Quote |
|
#JusticeforFelipe
#PoultrylivesMatter |
View Quote At that point I'd just say fuck it and slap a DD 11.5 with pinned LPGB on there, correctness be damned. |
|
|
View Quote i picked up a FSB barrel from shark arms for $250. I am in same boat to shave or just knock off and install G block. |
|
|
Originally Posted By RocketCity556:
Is the undrilled worth the extra $$$? Will the exposed hole from the fsb make a difference? i picked up a FSB barrel from shark arms for $250. I am in same boat to shave or just knock off and install G block. View Quote I think shaving the FSB is the best route. By the time I got that barrel, and sent it off to have the G block pinned, I'd have almost 500 into it. NOPE. |
|
|
Yeah maybe a mod can combine all the threads?
I'm in on the FBI clone build so I picked up a Mk4 rail. I might depart from the standard 5.56 and build this rifle in 6.5 Grendel. If you've been tracking; the 6.5 G with an 11" barrel has better ballistics than the 5.56 but hits like a 300 BLK that can go out to 800 meters. I think its a perfect round for an SBR and it should go perfect with the 10" G rail. Barrel will be from Alexander Arms as they've done a lot of the dev work on this round. We'll see how the parts collecting shapes up. |
|
|
Originally Posted By seamasterpro:
So which thread is the official thread now? This one? Or this one? Maybe this one? Maybe the original? View Quote |
|
|
I ordered an OD rail. I think my build will end up something like what’s listed below but I’m tapped out on funds right now.
Lower: Colt AR15A4 Lightweight LE Carbine marked lower (need to Form 1) Geissele buffer tube in black Geissele G2S trigger B5 SOPMOD in OD Upper: Colt receiver Colt 11.5 barrel A2 or Surefire Closed Tine flash hider OD MK4 Federal rail Troy BUIS Aimpoint T2 w/Geissele mount or Eotech EXPS3-0 Surefire M300 with MLOK mount and SR07 switchboard |
|
|
Originally Posted By Marksman14: Any idea where those can be found? I do like "clone" type builds, but I won't sacrifice functionality or build quality just to get one "right". I'm thinking I'll just shave the FSB and call it a day. View Quote |
|
|
Originally Posted By StevieJ309:
Looks like it's missing. View Quote View All Quotes View All Quotes Originally Posted By StevieJ309:
Originally Posted By CWied:
Originally Posted By BurtSaun1049:
Not that I want to disclose *ETA: nvm, I delivered https://i.imgur.com/WEvmKqX.jpg?1 |
|
|
Originally Posted By Marksman14:
So for those doing this, just stripping off the FSB and set screwing the G block? I hate having that stupid front pin hole exposed when the FSB is removed, almost as much as I hate relying solely on set screws on a non-dimpled barrel. Thinking of just shaving the FSB and calling it a day. View Quote |
|
|
Originally Posted By Marksman14:
No the exposed hole doesn't matter. Just an aesthetic thing that bothers me. I think shaving the FSB is the best route. By the time I got that barrel, and sent it off to have the G block pinned, I'd have almost 500 into it. NOPE. View Quote View All Quotes View All Quotes Originally Posted By Marksman14:
Originally Posted By RocketCity556:
Is the undrilled worth the extra $$$? Will the exposed hole from the fsb make a difference? i picked up a FSB barrel from shark arms for $250. I am in same boat to shave or just knock off and install G block. I think shaving the FSB is the best route. By the time I got that barrel, and sent it off to have the G block pinned, I'd have almost 500 into it. NOPE. |
|
Necessity is the plea for every infringement of human freedom. It is the argument of tyrants; it is the creed of slaves. - William Pitt the Younger
|
Originally Posted By StevieJ309: Shark Arms for the FBI barrel. You'd have to be on crack to pay Charlie's price. View Quote Worst case, I'm just going to get a DD 11.5 with a pinned LPGB and call it a day. Not "correct", but a damn good barrel. |
|
|
Anyone know if ADCO will shave a FSB? Or is this a John from Retro arms type job? I do not have the tools to do something like that, and if i attempt it I'd butcher it.
|
|
|
Originally Posted By JLAudio:
Anyone know if ADCO will shave a FSB? Or is this a John from Retro arms type job? I do not have the tools to do something like that, and if i attempt it I'd butcher it. View Quote nothing to it. |
|
|
Originally Posted By Marksman14: Thats the plan right there. Sent an email to order one up so hopefully he still has them. Worst case, I'm just going to get a DD 11.5 with a pinned LPGB and call it a day. Not "correct", but a damn good barrel. View Quote |
|
|
Originally Posted By wissota4:
good reason to get a 5 dollar hack saw from menards... and a file. nothing to it. View Quote View All Quotes View All Quotes Originally Posted By wissota4:
Originally Posted By JLAudio:
Anyone know if ADCO will shave a FSB? Or is this a John from Retro arms type job? I do not have the tools to do something like that, and if i attempt it I'd butcher it. nothing to it. |
|
#JusticeforFelipe
#PoultrylivesMatter |
Necessity is the plea for every infringement of human freedom. It is the argument of tyrants; it is the creed of slaves. - William Pitt the Younger
|
Originally Posted By OlacAttack: I'd call, when I talked to him a few days ago he said he was a few days behind on emails, he had sold so many barrels since the G sale started. Was at over 100 on the 23rd. View Quote Got on the list either way...also for a complete 11.5 upper. |
|
|
Originally Posted By M4A1SOPMOD:
When the feds show up to confiscate your guns and yall got the same rifle... https://i.imgur.com/HAD0DZj.jpg View Quote |
|
|
Originally Posted By OlacAttack: I'd call, when I talked to him a few days ago he said he was a few days behind on emails, he had sold so many barrels since the G sale started. Was at over 100 on the 23rd. View Quote |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.