So I am getting all the information I need for this build but some things I am either having a hard time finding or I'm not sure what is correct. Has anyone heard of and used Linemount? Are they good to order from?
Big motivator to finally cram what everything that I need to get is my Phoenix Weaponry moderator clone should be getting approved any time now, submitted to the ATF Tuesday afternoon. :D Also my first "suppressor" which is exciting.
My current list is this:
For a stripped slick side upper going with this,
https://www.primaryarms.com/luth-ar-a1-stripped-ar15-upper-receiver-slick-sideRear sight kit, also Luth-AR,
https://shop.brownells.com/gun-parts/rifle-parts/rifle-sights-parts/ar-15-a1-rear-sight-assembly/?sku=100024755For a charging handle I'm not sure what version was used. On the Linemount sight they list a "601 style", https://linemount.com/product/retro-601-style-a1-triangle-charging-handle-gray/
6 hole CAR15 handguards, H&R made,
https://palmettostatearmory.com/h-r-us-made-gi-quality-carbine-length-drop-in-6-hole-handguard.htmlSlip ring,
https://shop.brownells.com/gun-parts/rifle-parts/rifle-handguards-parts/ar-15-a1-deltaslip-ring/?sku=430106648Currently haven't looked for a bolt yet, don't think I need to get to worried about it but I would like to be as clone correct as possible if I could
I'm not sure what to do for a dust cover. I know there were some differences in the early ones but not sure what I should get.
Tried looking a little for a front sight without the bayonet lug but haven't had any luck yet.
For the barrel, what is the actual correct length. I've seen 10", 10.3". and 10.5 all listed". And they are the pencil profiles and carbine length gas tube correct? Any recommendations for a correct one?