User Panel
What’s wrong with it?
|
|
Point shooting will give you monkeypox. - John_Wayne777
The Emu War could have been won if the Australians used red dots on their handguns. |
So instead of the longer handguard on your 16” , you have the shorter one found on 11” variants? Am I understanding that correctly?
|
|
|
Two different barrel & gas system lengths in those photos. You got the short barreled hand guard on your 16” rifle?
Is your gas block adjustment knob in line with the cut out to adjust it or is it in front of it? |
|
Herpin' TX.
|
Picture of your actual rifle?
|
|
|
Here's the actual rifle I purchased new from a local Dealer. The handguard is not what comes on the 5.56 16" rifle from Sig; installed is the 7.62x39 11"/SBR rifle standard stock handguard. The handguard that should be on my new rifle is the longer 5.56 LT 13" handguard. I have no idea how or why it was built incorrectly, but I plan to contact Sig tomorrow and arrange an RMA so that they can correct the problem by installing the handguard is should come with by default. Here's a link to a photo of my actual rifle as it came new from a local Dealer;
My new Sig 5.56 Spear LT 16" |
|
|
Originally Posted By bobweaver: Two different barrel & gas system lengths in those photos. You got the short barreled hand guard on your 16” rifle? Is your gas block adjustment knob in line with the cut out to adjust it or is it in front of it? View Quote Hi Bob, yes, the SBR/Pistol short handguard which comes standard on the 7.62x39 Spear LT is what is on my new rifle purchased from a local Dealer. This handguard is not made to even fit their SBR/Pistol 5.56 Spear LT setup, much less the 5.56 16" Spear LT that I have. I posted a link to my actual rifle. |
|
|
Originally Posted By thedownzero: So instead of the longer handguard on your 16” , you have the shorter one found on 11” variants? Am I understanding that correctly? View Quote Hi thedownzero, yes you are correct. The worst part is that this short handguard on my new rifle is not even for a 5.56 LT, it's specifically designed for the 7.62x39 LT series. |
|
|
Originally Posted By 45-Seventy: What’s wrong with it? View Quote Hi 45-Seventy, my new rifle was either not built right, or, someone swapped handguards before I purchased it new from a local Dealer. I need the correct 13" handguard length it should have come with, for accessory and hand-grip spacing. Additionally, the one installed now is designed to fit on the Spear LT 7.62x39 11" Pistol/SBR barrel. So, keeping this on my 5.56 16" is not an option. |
|
|
Just hit up Sig and see what they say.
I’d venture a guess they’ll swap it out for you. |
|
|
Originally Posted By Nipkinz: Hi 45-Seventy, my new rifle was either not built right, or, someone swapped handguards before I purchased it new from a local Dealer. I need the correct 13" handguard length it should have come with, for accessory and hand-grip spacing. Additionally, the one installed now is designed to fit on the Spear LT 7.62x39 11" Pistol/SBR barrel. So, keeping this on my 5.56 16" is not an option. View Quote Contact sig and find out what it shipped with. The LGS may have swapped it. It's possible. |
|
|
Originally Posted By Nipkinz: Hi Bob, yes, the SBR/Pistol short handguard which comes standard on the 7.62x39 Spear LT is what is on my new rifle purchased from a local Dealer. This handguard is not made to even fit their SBR/Pistol 5.56 Spear LT setup, much less the 5.56 16" Spear LT that I have. I posted a link to my actual rifle. View Quote View All Quotes View All Quotes Originally Posted By Nipkinz: Originally Posted By bobweaver: Two different barrel & gas system lengths in those photos. You got the short barreled hand guard on your 16” rifle? Is your gas block adjustment knob in line with the cut out to adjust it or is it in front of it? Hi Bob, yes, the SBR/Pistol short handguard which comes standard on the 7.62x39 Spear LT is what is on my new rifle purchased from a local Dealer. This handguard is not made to even fit their SBR/Pistol 5.56 Spear LT setup, much less the 5.56 16" Spear LT that I have. I posted a link to my actual rifle. It really shouldn’t cause any issues outside of the gas adjustment cutout being in the wrong spot. A SPEAR LT handguard is a SPEAR LT handguard, so it will “fit” from a mechanical standpoint. I’d still hit up Sig though if the local dealer isn’t helping. |
|
|
It's hard to tell from your pic if it's blocking access to the gas adjustment. If so there's a chance it's a mixup. If it's not it could be something they started doing. Frequently they change stuff like this without telling anyone or updating pictures and info on their website.
|
|
BikerNut:
Normal people like motorcycles. Real people like motorcycles. People who don't like motorcycles are just... weird. |
Originally Posted By ALASKANFIRE: It's hard to tell from your pic if it's blocking access to the gas adjustment. If so there's a chance it's a mixup. If it's not it could be something they started doing. Frequently they change stuff like this without telling anyone or updating pictures and info on their website. View Quote Great point Alaskanfire, thank you. I'll get in touch with Sig and find out whether it was a goof on their side, or an unpublished update (which would be highly unusual since this handguard is only advertised / sold for the 7.62x39 SBR/Pistol variant). Great responses to my first post guys, thank you all very much! I'll update this thread after I speak with Sig, thanks again. |
|
|
Originally Posted By ALASKANFIRE: It's hard to tell from your pic if it's blocking access to the gas adjustment. If so there's a chance it's a mixup. If it's not it could be something they started doing. Frequently they change stuff like this without telling anyone or updating pictures and info on their website. View Quote It is blocking the adjustment. In his pic, you see the tail end of his gasblock in the cutout. The wings would be visible, if it was in the proper spot. Goodluck, OP. An interesting mixup, if from the factory. |
|
|
Final Update:
As recommended, I reached out to Sig customer support today with regard to the handguard concerns on my new rifle. They agreed that it's not the correct handguard for the weapon. I've received an RMA # and a free FedEx shipping label. They will put the correct handguard on the upper and ship it back to me, all free of charge. Excellent resolution! Thanks again for your advice and responses. |
|
|
Originally Posted By Nipkinz: Final Update: As recommended, I reached out to Sig customer support today with regard to the handguard concerns on my new rifle. They agreed that it's not the correct handguard for the weapon. I've received an RMA # and a free FedEx shipping label. They will put the correct handguard on the upper and ship it back to me, all free of charge. Excellent resolution! Thanks again for your advice and responses. View Quote Nice. Weird mix up on their part |
|
|
Originally Posted By Nipkinz: Final Update: As recommended, I reached out to Sig customer support today with regard to the handguard concerns on my new rifle. They agreed that it's not the correct handguard for the weapon. I've received an RMA # and a free FedEx shipping label. They will put the correct handguard on the upper and ship it back to me, all free of charge. Excellent resolution! Thanks again for your advice and responses. View Quote Right on. Glad to hear you're being taken care of. Hopefully you can get out and shoot it, within a week. |
|
|
Did you ever contact the dealer about this issue? Is it possible they pulled a switch-a-rou? Yes, that is a possibility, but I doubt it. When you bought it, you and a store employee both looked at the rifle. Since you didn't notice it, it could be that a store didn't notice either. How would they have ended up with a 7.62x39 pistol hand guard? I could see were someone might want a longer hand guard on a shorter barrel, but if there was someone that wanted a longer hand guard, it still would have been a 7.62x39 gas system. They would have the same problem you have with the opening in the rail being in the wrong place for the gas system. It would seem to me that this would be a problem that came from SIG, not from the LGS.
Scott |
|
|
Not that it really matters, but I doubt your new handguard will match the color of your upper. They will be "shades apart".
|
|
|
Originally Posted By canon3825: Did you ever contact the dealer about this issue? Is it possible they pulled a switch-a-rou? Yes, that is a possibility, but I doubt it. When you bought it, you and a store employee both looked at the rifle. Since you didn't notice it, it could be that a store didn't notice either. How would they have ended up with a 7.62x39 pistol hand guard? I could see were someone might want a longer hand guard on a shorter barrel, but if there was someone that wanted a longer hand guard, it still would have been a 7.62x39 gas system. They would have the same problem you have with the opening in the rail being in the wrong place for the gas system. It would seem to me that this would be a problem that came from SIG, not from the LGS. Scott View Quote Hi Scott, your logic is spot on. It was a factory oops. |
|
|
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.