![Bravo Company BCM](/images/2016/banners/sticky/BCM_StickyBarAd_225x40.gif)
![Login](/images/2016/spacer.gif)
Posted: 12/22/2013 8:41:52 PM EDT
[Last Edit: GamecockOperator]
PSA - I hope you will permit this thread to be stickied in this forum. it will be a help i hope for your customers both new and old.
this thread is intended to be a definitive thread on PSA's Lower receivers. It is by far not perfect. if there are other things that I miss, please feel free to post up, and we'll modify the thread. Hopefully this will help people tell the difference in the various PSA lowers that they have released over the years. I expect this thread to grow as PSA releases more lowers of various types. The PSA Lower Receiver Definitive Thread We will start with the PSA AP Lowers. They are the first Lowers that PSA released. I believe they were released around 2008-2009. Then re-introduced in 2013. Per PSA Rep here on the forums, AP serials that were manufactured before 2012, have the serial number sequence below 002500. So all First run AP serial number lowers will be sub 002500. Any AP serialized lower receivers that are serial numbers 002501 and higher, were manufactured after 2015. All AP serial lowers, were produced by Aero Precision for Palmetto State Armory. PSA AP LOWERS The PSA AP lowers have the SN prefix of AP00xxx as the serial number. These forged lowers are quality made using material is 7075-T6 and are marked "CAL MULTI" to accommodate most builds. Finish is Black Hardcoat Anodize per MIL-8625 Type 3 class 2. Serial number prefix is as stated above"AP". Fire selector markings are bullet pictograms. This is a "Low shelf" lower. If memory serves me correctly, they were originally released at 79.99 each. The original run is no longer in production, but the AP series was re-introduced in 2013. AP serials under 002500 will be pre 2012, AP serials with 7 digits are 2015 and later and they look like this : ![]() I do not remember if their first run AP's also came in a Safe / Fire configuration. i seem to want to think they did. Second run PSA lowers, are known as the LW lowers. They to my knowledge came in both Safe / Fire lowers and Pictogram lowers. LW Serial Prefix lowers These forged lowers are quality made using 7075-T6 and are marked "CAL MULTI" to accommodate most builds. Finish is Black Hardcoat Anodize per MIL-8625 Type 3 class 2.Serial Number prefix is "LW". Fire selector is marked "Safe" and "Fire". This is a "high shelf" lower. They Look like : ![]() There are now numerous variatons of this lower.. the GADSDEN FLAG and the MOULTRIE FLAG and in August of 2015, they introduced the SC STATE FLAG, And US FLAG lowers.. which simply are the same as LW lowers, or any other in house or out of house produced PSA lower, with an ETCHED Gadsden "dont tread on me" flag on the opposite side of the magwell... thus also known as the "Don't Tread On Me" lower. The Moultrie, with an ETCHED Moultrie Flag on the opposite side of the roll mark magwell... this lower is marketed as the "LIBERTY" lower. The SC Flag one, much like the USA Flag lower, are pretty much self explanatory by their naming convention as to what they are. To my knowledge they are etched by a local trophy shop in Columbia, that at this time i will refrain from naming, so as to not give out all of their secrets, and to hopefully keep from getting the thread deleted. To date, all Etched PSA Lowers, including the Moultrie and Liberty, and SC flag and USA Flag, and others have a marked list price of 129.99, and can sell for less than that routinely depending upon what sales PSA is running at the time. The Gadsden flag or "Don't Tread on Me" lower looks like this : ![]() The Gadsden flag or "Don't Tread on Me" AR-10 Variant lower looks like this : ![]() The Moultrie lower, AKA the "Liberty" lower looks like this : ![]() The SC Flag flag or "Palmetto State Flag " lower looks like this : ![]() The "I STAND" lower receiver lower looks like this : ![]() The U.S. Flag lower or "Old Glory" lower looks like this : ![]() The #OneMore Lower lower looks like this : ![]() The SC STRONG Lower In the fall of 2015, South Carolina suffered from record rain fall and subsequent flooding. PSA made a lower with a state image and the word strong engraved into the mag well to commemorate the event, and assist in flood relief by donating 20.00 of each lower sale to flood relief. The Description from PSA's page was as follows : South Carolina is going through a natural disaster so devastating it is hard to put into words. Even more complex to describe is the outpouring of support coming from the hearts of so many wonderful people across this great country. While the cleanup process is still going and the rebuilding phase has yet to even begin, the belief in the kindness of ones fellow man and the hope of better days to come is just as important to the flood victims of South Carolina. For every SC strong lower sold, twenty dollars will be used to directly help flood victims across the state. You may not now or ever have lived in South Carolina, but in a time of crisis we all can be South Carolina Strong! These lowers sell/sold for 119.99 each. They look like this: ![]() both the Gadsden and the Moultrie, as well as SC Flag and US Flag lowers state they can come with either safe/fire or pictogram lowers. I think the only ones I've seen thus far were Safe/Fire setups. They are machined for PSA by L.W. Schneider PSA YOU LIE lowers : Special Run Lowers, honoring JOE WILSON's comment regarding Obama's State of the Union address. They were originally supposed to be a limited run of 999 lowers, but PSA caught a ton of flack, and had to supposedly cut production and pull them from the shelves after national media started running them in the news. These were forged lowers and made using material is 7075-T6 and are marked "CAL MULTI" to accommodate most builds. Finish is Black Hardcoat Anodize per MIL-8625 Type 3 class 2. Unfortunately i cant remember what they sold for routinely, when first introduced. if anyone does have a definitive price point please let me know. I've since seen them sell for as much as 500.00 a stripped lower on gunbroker.org. The You Lies Roll mark and serial look like this : ![]() ![]() PSA NOBO12 Lowers : Special run lowers, setup in hopes to help bolster the removal of OBAMA from office, in 2012, they were released in early 2012, or late 2011. they have a unique roll mark of a "Obama-esque" type symbol, the model designation of NOBO12 instead of the usual PA-15, the serial numbers started with the prefix of "YES WE CAN", and the safe / fire was, "Hope" or "change"... Like the YOU LIE Wilson lowers, there was a lot of controversy around these lowers. They were forged lowers and made using material is 7075-T6, with Black Hardcoat Anodize per MIL-8625 Type 3 class 2. Unfortunately i cant remember what they sold for routinely, when first introduced. if anyone does have a definitive price point please let me know. I've since seen them sell for as much as 500.00 a stripped lower on gunbroker.org. They look like this : ![]() The PSA SC Lower: It Is made by FN manufacturing in Columbia SC, it has a different roll mark than the standard LWs... they have LOW shelves, ARE M-16 Pocket Cut, and a "teflon" feel to their finish.. Their SC lower's have the SN prefix of SC for South Carolina and are most easily distinguished by their Laser cut Cross Cannon roll mark's precision. The following description is from PSA's site : Produced right here in Columbia by a mil-spec contractor, these receivers are made using the most advanced manufacturing technology to produce the industry's finest forged lowers. The low shelf design is pre-drilled for a rear lug set screw (1/4-28 tpi) which, when installed, allows adjustment for a no-rattle fit. The crossed cannon logo is engraved with laser precision on the magwell, and the serial number prefix is "SC". These forged lowers are quality made using material is 7075-T6 and are marked "CALIBER MULTI" to accommodate most builds. Finish is Black Hardcoat Anodize per MIL-8625 Type 3 class 2. Serial Number prefix is "SC". Fire selector is marked "Safe" and "Fire". This is a "low shelf" lower. All currently available serials are less than 500 - while supplies last. To Date this is the ONLY lower that PSA has produced with the M16 Cut Shelf. Although there is desire amongst their die hard fans for them to convert all their lowers to being M16 Cut lowers, for accurate cloning and because it is just the right thing to do, there is an issue. These lowers while having the M16 cut, arent machined perfectly, as the inner walls of the receiver where the M-16 cut is are thicker than a standard M-16 cut lower's walls are. It is not known if these were to be milled for M16 pin's if they would function properly or not because of this. If anyone has the proper FFL to convert these lowers over to full auto, then by all means please let me know so i can update the thread. The easiest way to tell if you have an authentic FN produced lower, is to look for the m16 cut, but if you cant open the rifle, then examine the Roll mark of the cross cannons. The FN laser cut was much more detailed, and gave the PSA LOGO an almost 3D look to its engraving. it is easy to tell the difference to the quality of the lower if you examine that logo when compared to the standard PSA engraved lowers. They look like this (FN on top, standard LW Schneider on bottom): ![]() The PSA Stealth Lower They too have LOW shelves, and a mil spec finish. They have NO ROLL mark, and their serial numbers being with "PA" For Palmetto state Armory. From PSA's Site : this lower features no roll mark on the left hand side, just the caliber, model and serial. Leave the area blank or engrave your own logo for the ultimate custom rifle. These forged lowers are quality made by a mil-spec contractor using 7075-T6 aluminum and are marked "MULTI" to accommodate most builds. Finish is Black Hardcoat Anodize per MIL-8625 Type 3 class 2. Serial Number prefix is "PA". Fire selector is marked "Safe" and "Fire". This is a "low shelf" lower. All currently available serials are less than 1000 - while supplies last. They look like this : ![]() The American Hero Series Lowers : On 1/30/14 PSA announced via Facebook that they were coming out with their American Hero Series. These lowers were first announced in 2 variations The Operation Iraqi Freedom and the Operation Enduring Freedom Lowers. First we'll describe the Operation Iraqi Freedom Lower. This lower has no PSA cross cannon Roll mark. It has instead an Engraving of the map outline of the country of Iraq. Instead of PA-15 as model number it states OIF-15. Instead of a PA, SC, LW, serial prefix, it has an IRAQ Prefix. From PSA's description on their site : Palmetto State Armory is proud to announce our OIF-15 Iraq lowers. The lower is engraved with the outline of Iraq and the serial has a prefix of "IRAQ". In addition, for each lower sold a $5 donation will be made to the "Hidden Wounds" foundation. For more information, please visit http://www.hiddenwounds.org/ These lowers are made using the most advanced aerospace manufacturing technology to produce the industries finest, forged Mil-Spec lowers. Our receivers are machined on a multimillion dollar, automated, manufacturing system which enables us to produce a product of unequaled quality and value. These forged lowers are quality made using material is 7075-T6 and are marked "CAL MULTI" to accommodate most builds. Finish is Black Hardcoat Anodize per MIL-8625 Type 3 class 2. Serial Number prefix is "IRAQ". Fire selector is marked "Safe" and "Fire". This is a "high shelf" lower. Here is the OIF Lower : ![]() Secondly we'll describe the Operation Enduring Freedom Lower. This lower has no PSA cross cannon Roll mark. It has instead an Engraving of the map outline of the country of Afghanistan. Instead of PA-15 as model number it states OEF-15. Instead of a PA, SC, LW, serial prefix, (their standard ones) it has an AFGHAN Prefix. From the PSA website : Palmetto State Armory is proud to announce our OEF-15 Afghanistan lowers. The lower is engraved with the outline of Afghanistan and the serial has a prefix of "AFGHAN". In addition, for each lower sold a $5 donation will be made to the "Hidden Wounds" foundation. For more information, please visit http://www.hiddenwounds.org/ These lowers are made using the most advanced aerospace manufacturing technology to produce the industries finest, forged Mil-Spec lowers. Our receivers are machined on a multimillion dollar, automated, manufacturing system which enables us to produce a product of unequaled quality and value. These forged lowers are quality made using material is 7075-T6 and are marked "CAL MULTI" to accommodate most builds. Finish is Black Hardcoat Anodize per MIL-8625 Type 3 class 2. Serial Number prefix is "AFGHAN". Fire selector is marked "Safe" and "Fire". This is a "high shelf" lower. Here is the OEF lower : ![]() The quantity of run is yet unknown, however has been said to be "limited" for both OIF and OEF. Second Series of the American Hero series Lowers Around May 17th 2014 PSA Released what I will call the Second series of the American Hero Series Lowers. These lowers were in tribute to those servicemen and women that served our country in the Kuwaiti action of the early 90's, and the Vietnam Conflict / War of the 60's/70's. The quantity of run is yet unknown, however has been said to be "limited" for both DS-Kuwait and Vietnam. The Vietnam Lower seems to be the hardest to get of the American Hero Series. Here is the Description of the DS-Kuwait lower as it appears on PSA's Web site : Palmetto State Armory is proud to announce our DS-15 Kuwait lowers. The lower is engraved with "DS-15 MULTI" and the serial has a prefix of "KUWAIT". In addition, for each lower sold a $5 donation will be made to the "Hidden Wounds" foundation. For more information, please visit http://www.hiddenwounds.org/ These lowers are made using the most advanced aerospace manufacturing technology to produce the industries finest, forged Mil-Spec lowers. Our receivers are machined on a multimillion dollar, automated, manufacturing system which enables us to produce a product of unequaled quality and value. These forged lowers are quality made using material is 7075-T6 and are marked "CAL MULTI" to accommodate most builds. Finish is Black Hardcoat Anodize per MIL-8625 Type 3 class 2. Serial Number prefix is "KUWAIT". Fire selector is marked "Safe" and "Fire". This is a "high shelf" lower. So without further adue, here is the "Operation Desert Shield" Kuwait Lower : ![]() The second lower of the second round of the American Hero Series is the Vietnam lower. Here is the description of the PSA Vietnam Lower as it was / is on their website : Palmetto State Armory is proud to announce our VTM-15 Vietnam lowers. The lower is engraved with "VTM-15 MULTI" and the serial has a prefix of "VIETNAM". In addition, for each lower sold a $5 donation will be made to the "Hidden Wounds" foundation. For more information, please visit http://www.hiddenwounds.org/ These lowers are made using the most advanced aerospace manufacturing technology to produce the industries finest, forged Mil-Spec lowers. Our receivers are machined on a multimillion dollar, automated, manufacturing system which enables us to produce a product of unequaled quality and value. These forged lowers are quality made using material is 7075-T6 and are marked "CAL MULTI" to accommodate most builds. Finish is Black Hardcoat Anodize per MIL-8625 Type 3 class 2. Serial Number prefix is "VIETNAM". Fire selector is marked "Safe" and "Fire". This is a "high shelf" lower. These also were listed as a regular price of 119.99 on their website. So here is the example of the Vietnam Lower (photo Courtesy of Member Nuron): ![]() Secondary photo found on the web : ![]() PSA AR-10 Series Lowers .308 Lower On 1/10/14 at the 2014 SHOT show PSA released a "Top Secret" not so top secret post on their Facebook Page It announced thier upcoming .308 lower. PSA AR-10 Gen 1 LOWER : On 8/15/14 PSA Released their AR-10 Lower. These lowers have serial prefixes of PA or PF. PA is marked .308 caliber where as PF is marked Multi Caliber. This information is from PSA's website .308 Caliber Forged 7075-T6 Receiver Hardcoat Anodized Integrated Trigger Guard Accepts SR-25 Type Magazines Made using the most advanced aerospace manufacturing technology to produce the industry's finest forged .308 lowers, our receivers are machined on an automated multi-million dollar manufacturing system which enables us to produce a product of unequaled quality and value. These forged lowers are quality made using 7075-T6 aluminum. The finish is black hardcoat anodize per MIL-8625 Type 3 Class 2. Additionally the receivers include an integrated trigger guard, and are designed to use AR15 fire control groups so your favorite AR class trigger can be used. These are developed for use with SR-25 pattern magazines - which are commonly available in metal or polymer. The PSA AR-10 Lower looks like this : ![]() 01 - PSA AR-10 - Lower Gen 1[/url] .308 Lower, MULTI Caliber lower In early 2017 PSA released their Gen 2 AR-10 lowers. They have been significantly redesigned. From their site: With streamlined styling and improved function, the new and improved PSA PA10 is here. The Gen2 model offers enhanced chambers and extraction. with a more modern appearance. Precision machined from forged 7075-T6 aluminum, these lowers are then Black anodize hardcoated to MIL-8625 Type 3 class 2. With an AR-15 style fire control group, and stock and grip options, the PSA PA10 allows the same configuration flexibility as enjoyed by the AR15, and is an ideal platform for the 308 cartridge. Machined from Aluminum Forgings 7075-T6 Hardcoat Anodizing: MIL-A-8625F, Type III, Class 2 Milspec diameter PA10 6-position Receiver Extension Standard AR15-style fire control group A2-style grip M4-style Stock Staked M4 Lock Nut Standard Heavy Carbine Buffer Caliber: .308 The Gen2 PA-10 receivers are functionally compatible with the Gen1 receivers, however we recommend matching Gen2 lowers to Gen2 uppers for best appearance. There are external cosmetic differences when mixing gen1 and Gen2 upper and lower receivers that some may not find appealing. The PSA AR-10 Gen 2 lowers look like this : ![]() 02 - PSA AR10 - Lower Gen 2[/url] P-TAC AR-10 Series Lowers .308 Lower On 10/17/14 PSA announced the P-TAC 10 Lower receiver with an introductory price of only 99.99, and a regular price of 139.99. P-TAC Tac10 .308 Lower Receiver 7075 T6 Forged Aluminum Lower Hardcoat anodized Compatible with PSA PA10 Uppers. Accepts SR-25 Type Magazines. Made from 7075 Forged Aluminum, these lowers are precision machined to exacting tolerances by a mil-spec supplier and then hardcoat anodized. Designed to work interchangeably with PSA PA10 uppers. Because of PSA's Official Announcement that they had bought PTAC, it is widely believed that the PTAC 10 lowers are the same in fact as PSA AR10 lowers, with the exception of the roll mark and writing on them. Here's the PTAC10 Lower. ![]() And as previously mentioned the AR-10 Etched Gadsden Lower : ![]() Finally in 2018, PSA released the 6.5 Creedmoor AR10 Lower receiver. this is only available in the Gen 2 Lower style at this time. No news on wether it will be made available as a gen 1 style, but it would seem to most likely not. Or at least that's my thoughts on it. ![]() P-TAC AR-15 Series Lowers P-tac Multi AR-15 Lower Receivers Around Christmas of 2014 PSA announced the P-TAC 15 Lower receiver. These lowers are made using the most advanced aerospace manufacturing technology to produce the industries finest, forged Mil-Spec lowers. Our receivers are machined on a multimillion dollar, automated, manufacturing system which enables us to produce a product of unequaled quality and value. These forged lowers are quality made using material is 7075-T6 and are marked "CAL MULTI" to accommodate most builds. Finish is Black Hardcoat Anodize per MIL-8625 Type 3 class 2. At this time it is only offered in a safe /fire configuration, i would not be surprised if we are to see a pictogram version in the future. Because of PSA's Official Announcement that they had bought PTAC, it is widely believed that the PTAC 15 lowers are the same in fact as PSA AR15 lowers, with the exception of the roll mark and writing on them. Here's the PTAC15 Lower. ![]() PSA Limited Edition Hardcoat Anodized Receiver Sets Released lastly on 6/12/15 (perhaps earlier) as information about the creation and release is spotty, these came in 4 variations, and are pretty limited runs. We don't at this time know more than they came in 4 types, no one is sure of how many were made of each or total, at this point. You had four options. Pink digital camo, Digital Camo, tiger stripe (Vietnam style) and Gold(which i call burnt bronze). They came sold as a Set, upper receiver, lower receiver, and buffer tube. They sold for 149.99 each. They to my knowledge were all LW serial numbered lowers. If anyone has any more info on these it would be appreciated. These were originally listed as being Ceracoated, but upon discussion with manufacturing division it has been brought to my attention that these are actually hardcoat anodized. Here is what they look like: PSA Mil-Spec FDE Hardcoat Anodized lower set : ![]() ![]() PSA Tiger Hardcoat Anodized lower set : ![]() ![]() PSA Pink Digital Camo Hardcoat Anodized lower set : ![]() ![]() PSA Digital Camo Hardcoat Anodized lower set ![]() ![]() PSA OD Green Hardcoat Anodized lower set ![]() ![]() PSA AR9 Series Lowers During 2015/2016 PSA announced their entrance into the AR9mm game. They initially released a lower for a colt magazine, along with mag blocks to allow conversions of standard mags to use colt magazines with the use of a PSA 9mm upper. Later 2015/early 2016 PSA announced the billet AR9 Glock Lower. This Lower accepted Glock Magazines, and would permit use of a PSA Hybrid bolt for their uppers to be used for either lower. The colt style lower sold for 129.99 but can be routinely found on sale lower in stripped format. These colt style lower receivers have the following description per PSA's site. : PSA 9mm Forged Pistol Lower designed to use Colt®-style magazines Palmetto State Armory is proud to announce our latest 9mm AR lower. Machined from 7075 T6 forgings and then hard coat anodized, these lowers are purpose built to accept 9mm Colt®-style magazines. Designed to work with PSA's new 9mm Hybrid uppers. Works best with a Palmetto State Armory Hybrid 9mm Upper, and PSA lower build kits. These Colt style lowers look like this : ![]() The Glock 9mm lower comes in a billet version and a forged LRBHO version. PSA 9mm Billet Complete Magpul Original Equipment (MOE) Lower designed to use Glock®-style magazines with Mil-spec Matte Finish Palmetto State Armory is proud to announce our latest 9mm AR lower. Machined from Billet 7075 T6 forgings and then hard coat anodized, these lowers are purpose built to accept 9mm Glock®-style magazines. Designed to work with PSA's new 9mm Hybrid uppers. The lower is assembled with a Palmetto State Armory lower build kit with a black MOE Grip, 6 position Buffer tube and black MOE stock. Must be used with a Palmetto State Armory Hybrid 9mm Upper These lowers look like this : ![]() PSA AR9 Glock magazine Last Round Bolt Hold Open Lowers (LRBHO) These are forged Lower receivers that sell with a MSRP of 129.99 and they routinely sell for 119.99. These lowers are made using the most advanced aerospace manufacturing technology to produce the industries finest, forged lowers. Our receivers are machined on a multimillion dollar, automated, manufacturing system which enables us to produce a product of unequaled quality and value. These forged lowers are quality made using 7075-T6 aluminum and are Black Hardcoat Anodized per MIL-8625 Type 3 class 2. Comes with the magazine catch and ejector installed. Purpose built to accept 9mm Glock®-style magazines. Use of the PSA Hybrid 9mm Bolt is recommended. These lowers look like this, note the bar for the change for the LRBHO. : ![]() ![]() PSA AR45 Glock magazine with mag catch and ejectors PSA .45 ACP Billet Stripped Lower designed to use Glock®-style magazines. Palmetto State Armory is proud to announce our latest .45 ACP AR lower. Machined from Billet 7075 T6 forgings and then hard coat anodized, these lowers are purpose built to accept .45 ACP Glock®-style magazines. Designed to work with PSA's new .45 ACP uppers. The lower is partially assembled with a propitiatory magazine catch and ejector, ready for all your standard AR-15 lower parts to build into a fully functioning lower. Accepts standard AR-15 fire control groups, bolt catch, take down & pivot pins, springs & detents, safety selector as well as stock, buffer tube and grips. Must be used with a Palmetto State Armory .45 ACP Upper. The PSA AR45 Lowers Look like these : ![]() PSA KS47 Series Hybrid AK style Lowers In early 2016 PSA announced the arrival of the Hybrid AR/AK lower. The official PSA site description reads as follows : The Palmetto State Armory KS47 is a variant of AR15 that combines the modular construction, accuracy and precision of the AR platform with the stopping power and the magazine options of the AK. While the current AR47 fires the 7.62x39 AK round, it uses modified AR-style magazines that are not nearly as plentiful as AK-style magazines, that were optimized for reliable feeding of the 7.62x39 round. The KS47 lets the AK shooter capitalize on his inventory of magazines and ammo with an AR-style platform. Unlike the AK, where the barrel is permanently pressed into the receiver, the KS47 features an AR-style modular configuration which consists of a barreled upper receiver, and a lower receiver that houses the fire control group and magazine. The modular configuration allows customers to have several different barrel configurations with one lower receiver, just by releasing two pins. Lower: 7075-T6 billet aluminum is hardcoat anodized, and accepts standard AR15 fire control groups. The extended magazine release is outside of the trigger guard for safety, which allows for an AK-style release movement, but also features oversize side paddles for fingertip release by the trigger finger. The KS47 lower requires the use of the PSA KS47 upper to accept AK magazines. Do not try to use standard AR uppers. They will not function with AK magazines. The Gen 1 KS47 Lower, looks like these next three images : ![]() ![]() ![]() PSA Billet Upper and lower Series Lowers In early 2016 PSA announced the arrival of the Billet Upper and lower set. These routinely sell stripped for 399.99 each, and on sale for 299.99 per set. the official PSA site description reads as follows : Palmetto State Armory is proud to announce our custom billet upper and lower set. Crafted on state of the art CNC machines for precision out of solid billet 7075 T6 aluminum, and then anodized to a matte black finish. The lower features a built in trigger guard, finger grooves on the leading edge of the magwell, and an aggressive magwell cut. The upper features T-marks, m4 cuts and is cut to accommodate extended paddle bolt releases. Uses standard AR parts for barrels and build kits. Give your next next build a custom look. ![]() ![]() PSA Custom Series Billet Upper and Lower In early 2019 PSA released their Custom Series Billet sets. They are very nice looking, and sell for around 274.95 for both upper and lower. They have unique badging for the PSA Custom Series. They look like this : ![]() ![]() ![]() Some folks are reporting new serial number prefix's. PI and others. If there are confirmations of these please send me photos so i can edit the page. PI Serial Prefix lowers These forged lowers are quality made using material is 7075-T6 and are marked "CAL MULTI" to accommodate most builds. Finish is Black Hardcoat Anodize per MIL-8625 Type 3 class 2.Serial Number prefix is "PI". Fire selector is marked "Safe" and "Fire". This is a "high shelf" lower. These lowers debut'ed around July 2016. They Look like : ![]() ![]() ![]() There has been some noticeable differences between the DC and LW lowers. As can be seen here in the following photos the DC seems to be less refined with its machining. The LW is on the left, the DC is on the right. ![]() ![]() ![]() Being that these are some of the first runs of the DC's, one can hope that they refine the machining to smooth out the differences. the magwell and grip webbing areas need particular attention as is shown in my opinion. PSA "SCD" prefixed Lower receivers In early 2017 PSA began producing more of their own lower receivers. These lowers are being produced in house by PSA or one of its conglomerate's sister companies. there are so far 2 variations of these lowers, a normal no trigger guard lower, and an integral trigger guard lower. PSA AR-15 "SCD" Serial Prefixed lower: ![]() ![]() ![]() PSA AR-15 Lower Safe/Fire Premium with built in trigger guard These lowers are made using the most advanced aerospace manufacturing technology to produce the industries finest, forged Mil-Spec lowers. Our receivers are machined on a multimillion dollar, automated, manufacturing system which enables us to produce a product of unequaled quality and value. These forged lowers are quality made using 7075-T6 aluminum and are marked "CAL MULTI" to accommodate most builds. Finish is Black Hardcoat Anodize per MIL-8625 Type 3 class 2. Serial number prefix is "SCD". Fire selector markings are "Safe" and "Fire". This is a "high shelf" lower. the Integral trigger guard lower looks like this : ![]() It is my belief that any PA, PI, PF, or P*, and the SCD series of lowers are being produced in house by PSA or one of its Conglomerate's sisters, one of these companies is widely known and mentioned before above. I have concrete evidence to state this, from conversations and various discussions and talks with people high up in PSA organization. That said, its all hear say because its not official. Take anything i've said here as just that, what *I* Believe and say, as I am no employee and know nothing of their business that can be stated as concrete legally to my knowledge. lol The PSA Black Friday Store Special Tribute Lowers For Black friday 2018, PSA made a limited run of lowers for their stores. Each store was tasked with developing an image for the roll mark, and then it was sent to production. I believe the production numbers for each lower was 500 lowers per store. I could be wrong with that. If anyone has a lower for the stores that is over 500 in serial please let me know. Until PSA gives me exact production numbers on these lowers I wont know how many were made of each for sure. PSA has 5 stores, but only 4 of the stores were permitted to do this, as the Ridgeland store is so small they didn't believe their clientele would be as interested in a lower to build for their store. That said, The other 4 stores were, Greenville, Columbia (fernandina road) Summerville, and Mt. Pleasant. The Logo for the Greenville store, is reminiscent of Las Vegas's sign as it is a play on what many locals call Greenville G'vegas. Columbia's lower, was designed to say COLA with a bullet swoosh under it, playing off the Soda City type name of Columbia, to be Cola. Summerville went with a Blackbeard the pirate theme, and Mt. Pleasant chose to use the new Ravenell Bridge as their logo. Here they are: First is the "Greenville Store" lower There were only 500 Made. They sold for 39.99 and look like this : ![]() next is the "Columbia Store" lower There were only 500 Made. They sold for 39.99 and look like this : ![]() and next is the "Summerville Store" lower There were only 500 Made. They sold for 39.99 and look like this : ![]() and next is the "Mt. Pleasant Store" lower There were only 500 Made. They sold for 39.99 and look like this : ![]() and next is the "Myrtle Beach Store" lower In the summer of 2023, PSA opened its first store in the Myrtle Beach area. For this store's Grand Opening they had produced a limited amount of Store Specific lowers, much like the Black friday lowers above. At this time, I believe that there was only 500 made, but that number is not definate. They may have made more, and i'll work on getting those exact numbers. I also believe that the price was the same as any other standard lower at the time which was 59.99. If it was not, I'll edit that later as well. This lower has the same specifications as all the other PSA Store specific lowers, and looks like this: ![]() The PSA MEME Specialty Lowers In mid -2018, PSA had started out making more specialty Lowers. These started out as a tongue in cheek type thing, but have since morphed into a Lower of the Month program. They started with a thread in AR-15.com's GD section, and have morphed into this wonderful thing that i've deemed MEME lowers. There are other lowers that i will include here that PSA developed on their own but because of the special roll marks that were chosen, I feel they fit right in here with the other Meme Lower receivers. The lowers are all low Shelf Lowers, and made by PSA in house by their sister companies under the JJE Capital brand. Most of the artwork that is on these lowers is provided by another Arfcom forum member @BrickWurX, so be sure to give him some thanks and love for his hard work on these too. The Lowers are AR-15 lowers, AR-10 Lowers, AR-9 lowers, and soon even an AR-45 Lower is slated for production. These lowers are as follows, and will be added as they go into production / pickup from being shipped. First is the "Poop Flinging Gremlin" lower There were only 500 Made. They sold for 39.99 and look like this : ![]() ![]() The Next in these lowers run is the first of the SpaceForce Lowers run, known as Space GUNNER. There were a total production run of only 2500 Made . These went on sale on October 1, 2018, for (39.99). They look like this : ![]() The Next in these lowers run is the Mad Dog Mattis Tribute Lower. There were a total production run of only 2500 Made . These went on sale on October 19, 2018, for (49.99). They look like this : ![]() The Next in these lowers run is the Turkey Day Lower. These were originally to be released around thanksgiving of 2018 but were delayed slightly and released a bit late. There were a total production run of only 2500 Made . They look like this : ![]() The Next in these lowers run is the Christmas 2018 tribute lower These were made as a tribute to the movie A Christmas story, as of today, no one has put their eye out yet that we know of. There were a total production run of only 2500 Made . These went on sale on December 5, 2018, for (49.99). They look like this : ![]() The Next in these lowers run is the No Step On Snek lowers This is a play on the don't tread on me Gadsden Flag. There were a total production run of only 10,020 Made . They look like this : ![]() The Next in these lowers run is the Reaper Series of lowers This was to be released for Halloween 2018, but were pushed back due to delays in the ATF / Manufacturing. There were a total production run of only 5000 Made . They look like this : ![]() The Next in these lowers run is the Spaceforce Series II This one is known as the "SpaceRider" There were a total production run of only 4984 Made . These went on sale on March 4, 2019, for (49.99). They look like this : ![]() The Next in these lowers run is the HBR ArfCom Lower This lower was specifically made to honor the dude who's started the whole thread, and it's a direct joke on him. There were a total production run of only 2500 Made . They look like this : ![]() The Next in these lowers run is the Freedom Eagle Head Lower This lower is the first in the Freedom Series of lowers to be made. There were a total production run of only 2500 Made . These went on sale in Early May, 2019, for (49.99). They look like this : ![]() The Next in these lowers run is the ATF Approval first lower. This lower is the first in the ATF Approval series of lowers to be made. There were a total production run of only 5436 Made . They look like this : ![]() The Next in these lowers run is the M4A1 Clone lower. This lower is the first in the Clone series of lowers to be made. There were 10,000 Made. These went on sale on May 1, 2019, for (49.99). They look like this : ![]() The Next in these lowers run is the The Wall-10. This lower is the first of the Trump style tributes, and the first one made on an AR-10 Platform. This is a GEN3 AR10 Lower. There were a total production run of only 2500 Made . These went on sale on April 19, 2019, for (89.99). They look like this : ![]() The Next in these lowers run is the The Confirmed-15 lower. This lower is a tribute to the election of Supreme Court Justice Brett Kavanaugh. There were a total production run of only 2500 Made . These went on sale on April 29, 2019, for (49.99). They look like this : ![]() The Next in these lowers run is the The Deplorables-15 lower. This lower is a tribute to the Deplorables that support president Donald Trump. There were a total production run of only 2000 Made . These went on sale on May 24, 2019, for (49.99). They look like this : ![]() The Next in these lowers run is the The Spacecannon-10 lower. This lower is the third in the Spaceforce series of lowers and first on the AR-10 platform. This is a GEN 3 AR10 Lower. There were a total production run of only 2810 Made . These went on sale on May 31, 2019, for (89.99). They look like this : ![]() The Next in these lowers run is the YEETCANNON lower. This lower the first of the true MEME lowers that PSA designed and released without us on this forum helping. It went on sale on June 20th, 2019 as the first of their PRE-order system. They are on the AR-15 (49.99), and the AR-9 (99.99) Platforms There were 1051 of the AR-15 and 750 of the AR-9 Made. Due to manufacturing issues the original cap of 750 for the AR-15 style was raised to 1051. At this time we believe that the Ar9 Yeet Cannon's were limited to 750. They look like this : ![]() ![]() The Next in these lowers run is the ISTAND-XX lower. It went on sale on July 3rd, 2019 as the third of their PRE-order system. They are on the AR-15 (49.99). AR-9 (89.99), and the AR-10 (79.99) platforms. The AR10, is a GEN 3 AR10 Lower. There were a total production run of ISTAND-15's only ???? Made . There were a total production run of ISTAND-9's only ???? Made . There were a total production run of ISTAND-10's only ???? Made . It was to support Standing for our great Flag. There were supposed to be 1776 of the AR-15 made, however due to a production error there were 2100 of them made, however there were also 1776 of the ar-9 and 1776 of the AR-10 Made. They look like this : ![]() ![]() ![]() The Next in these lowers run is the Betsy-15 Series of lowers. This lower the fourth of the true MEME lowers that PSA designed and released without us on this forum helping. It went on sale on July 8th, 2019 as the fourth of their PRE-order system. They are on the AR-15 (49.99). It was in response to those who didn't like the I-Stand/anti Kaperneck Lower idea to tribute Betsy Ross and the original 13 star Flag. the Betsy Ross Lower is Engraved on both sides of it, with different roll markings on each side. There were a total production run of only ???? Made . They look like this : ![]() ![]() Betsy-15s were produced with the flag going the wrong way. As pictured Below. The above photo is of a correct Betsy. At this time there is confusion about if PSA ever produced a Betsy-15 with the correct running flag as i have posted above. in truth the above photo may be of another meme lower, or a photo shop of what the flag should look like. Thank you to @chargerdude70 for his help in this matter, and the use of his image. ![]() The Next in these lowers run is the The SpaceWalker-15 lower. This lower is the Fourth in the Spaceforce series of lowers and is back on the AR-15 Platform. There were a total production run of only 1000 Made . These went on sale on July 9, 2019, for (49.99). They look like this : ![]() The Next in these lowers run is the The ASalt-15 lower. This lower is a play on the words for Assult Rifle, and was developed by D16-man here on the forums. It is on the AR-15 Platform. These went on sale on July 10, 2019, for (49.99). There were a total production run of only 849 Made . They look like this : ![]() The Next in these lowers run is the Minutemen-15 lower. This lower is a Tribute to the Minutemen of early America, as well as to those of us who would step up today. This is the Second lower on the Freedom series, following the Eagle's head. It is on the AR-15 Platform. These went on sale on July 9, 2019, for (49.99). There were a total production run of only 2000 Made . They look like this : ![]() The Next in these lowers run is the Alien-51 lower. This lower is a true MEME lower recognizing the online effort to storm area 51. It is on the AR-15 Platform. There were a total production run of only 1624 Made . They look like this : ![]() The Next in these lowers run is the FCancer-15 lower. Palmetto State Armory’s limited-edition "FCANCER-15™" lower will only be available once. The "-FCANCER15™” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "FCANCER-15™" Lower will accommodate all AR-15 platform builds and is marked "FCANCER-15™ MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. Fire Selector: "DIAGNOSE" (Safe), "FIGHT" (Fire), "THRIVE" (Full-Auto) It is the first in their Cancer Series, and some of the proceeds of it are going to be donated to Charity. Another part of it's Proceeds are going to be given to GamecockOperator to help his fight and pay some bills for him. It is on the AR-15 Platform. There were a total production run of only 2000 Made . They cost 49.99 each when released. They were released on 7/26/19 They look like this : ![]() The Next in these lowers run is the The Heroes-15 lower. This lower is a tribute lower in rememberance to 9/11 attacks.Palmetto State Armory’s limited-edition "HEROES-15™" lower will only be available once. The "HEROES-15™” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "HEROES-15™" Lower will accommodate all AR-15 platform builds and is marked "HEROES-15™ MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only 1000 Made . These went on sale on or around September 19, 2019, for (49.99). They look like this : ![]() The Next in these lowers run is the The NoBeto-15 lower. This lower is in response to Beto stating he was going to come take your ar-15's. Finish: Black, Hardcoat Anodized Caliber: Multi Fire Selector: "Hell Yes" (Safe), "Hell No" (Fire), "Snake Bite" (Full-Auto) California Buyers - stripped lowers are sent to California as "Long Guns" only. Please make sure the business name of the FFL you will be using is on your order. All net proceeds from the sale of this receiver will be donated to the nonprofit South Carolina Second Amendment Defense Fund. There were a total production run of only 5000 Made . These went on sale on or around September 13, 2019, for (49.99). They look like this : ![]() The Next in these lowers run is the The SpaceRover-15 lower. This lower is the last in the line of the Spaceforce lowers at this time. Palmetto State Armory’s limited-edition "SPACEROVER-15™" lower will only be available once. Only 2,000 of these are going to be made, so all serial numbers will be #1 through #2000. The "SPACEROVER-15™” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "SPACEROVER-15™" Lower will accommodate all AR-15 platform builds and is marked "SPACEROVER-15™ MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only 500 Made . PSA "SPACEROVER-15" Stripped Lower Receiver Caliber: Multi Fire Selector: "PATROL" (Safe), "DISCOVER" (Fire), "WREAK HAVOK" (Full-Auto) These went on sale on or around September 18, 2019, for ($49.99). They look like this : ![]() The Next in these lowers run is the The BabyPFG-15 lower. This lower is the second in the line of the PFG lowers. Palmetto State Armory’s limited-edition "BABYPFG-15" AR-15 lower will only be available once and is a limited edition offering. The "BABYPFG-15" AR-15 lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "BABYPFG-15" AR-15 Lower will accommodate all AR-15 platform builds and is marked "BABYPFG-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. . There were a total production run of only 500 Made . Finish: Black, Hardcoat Anodized Caliber: Multi Fire Selector: "Make Poop" (Safe), "Toss Poop" (Fire), "Spray Poop" (Full-Auto) These went on sale on or around September 25, 2019, for ($49.99). They look like this : ![]() The Next in these lowers run is the The Screw-15 lower. This lower is the second in the line of the Cancer fighting Lowers. Finish: Black, Hardcoat Anodized Caliber: Multi Fire Selector: "DIAGNOSE" (Safe), "FIGHT" (Fire), "THRIVE" (Full-Auto) In support of all who have battled cancer, $10 of each purchase will be donated to a Children's Cancer Research Hospital. Palmetto State Armory’s limited-edition "SCREW-15™" lower will only be available once. The "SCREW-15"™ lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "SCREW-15™" Lower will accommodate all AR-15 platform builds and is marked "SCREW-15™ MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only 500 Made . These went on sale on or around October 7, 2019, for ($59.99). They look like this : ![]() The Next in these lowers run is the The IHATEYOU-15 lower. This lower is loosely to tribute "GrumpyCat" without infringing upon trademarks/copyrights etc etc. Finish: Black, Hardcoat Anodized Caliber: Multi Fire Selector: "STOP" (Safe), "NO" (Fire), "NOPE" (Full-Auto) Palmetto State Armory’s limited-edition "IHATEYOU-15™" lower will only be available once. The "IHATEYOU-15™” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "IHATEYOU-15™" Lower will accommodate all AR-15 platform builds and is marked "IHATEYOU-15™ MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. These went on sale on or around October 21, 2019, for ($49.99). There were only 500 made before discontinuing. as such, they are VERY rare. This is a definite FINAL number. They look like this : ![]() The Next in these lowers run is the The FRANKENGUN-15 lower. This lower is the second Halloween tribute lower, and is tounge in cheek to frankengun builds. Finish: Black, Hardcoat Anodized Caliber: Multi Fire Selector: "EXTRA ROLL PIN" (Safe), "FULL PARTS BIN" (Fire), "IT'S ALIVE" (Full-Auto) Palmetto State Armory’s limited-edition "FRANKENGUN-15™" lower will only be available once. The "FRAKENGUN-15™” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "FRANKENGUN-15™" Lower will accommodate all AR-15 platform builds and is marked "FRANKENGUN-15™ MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only ???? Made . These went on sale on or around October 25, 2019, for ($49.99). They look like this : ![]() The Next in these lowers run is the The MAGA-15 lower. Finish: Black, Hardcoat Anodized Caliber: Multi Fire Selector: "FAKE NEWS" (Safe), "WRONG" (Fire), "HUUUGE" (Full-Auto) Palmetto State Armory’s limited-edition "MAGA-15" AR-15 lower receiver will only be available once with a limited run of 2,000 available. The "MAGA-15" lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "MAGA-15" AR-15 lower receiver will accommodate all AR-15 platform builds and is marked "MAGA-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only 2095 Made . These went on sale on or around November 9, 2019, for ($49.99). They look like this : ![]() The Next in these lowers run is the The GAMBLER-15 lower. Finish: Black, Hardcoat Anodized Caliber: Multi Fire Selector: "FOLD EM" (Safe), "HOLD EM" (Fire), "STACKED DECK" (Full-Auto) Palmetto State Armory’s limited-edition "GAMBLER-15™" lower will only be available once. The "GAMBLER-15™” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "GAMBLER-15™" Lower will accommodate all AR-15 platform builds and is marked "GAMBLER-15™ MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only 775 Made . These went on sale on or around November 13, 2019, for ($49.99). They look like this : ![]() The Next in these lowers run is the The TRASHPANDA-15 lower. Finish: Black, Hardcoat Anodized Caliber: Multi Fire Selector: "STEAL IT" (Safe), "KILL IT" (Fire), "EAT IT" (Full-Auto) Palmetto State Armory’s limited-edition "TRASHPANDA-15™" lower will only be available once. The "TRASHPANDA-15™” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "TRASHPANDA-15™" Lower will accommodate all AR-15 platform builds and is marked "TRASHPANDA-15™ MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only 525 Made . These went on sale on or around November 18, 2019, for ($49.99). They look like this : ![]() The Next in these lowers run is the The VIRGINIA-15 lower. Finish: Black, Hardcoat Anodized Caliber: Multi Fire Selector: "SIC" (Safe), "SEMPER" (Fire), "TYRANNIS" (Full-Auto) Paying homage to the Commonwealth of Virginia, Palmetto State Armory’s limited edition "Virginia-15” AR-15 lower commemorates our brothers and sisters in Virginia and across the United States civilly advocating for the fundamental rights of all law-abiding citizens to keep and bear arms as guaranteed by the Second Amendment to the United States Constitution. $10 from the sale of each of these receivers will be donated to the non-profit Virginia Citizens Defense League to support their efforts to defend the Second Amendment and constitutional rights. Palmetto State Armory’s limited-edition "Virginia-15" lower will only be available once. The "Virginia-15" lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. According to PSA postings here on AR-15.com this lower will be offered with no limit, but will be concluded once interest ends. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "Virginia-15" Lower will accommodate all AR-15 platform builds and is marked "Virginia-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only ???? Made . These went on sale on or around December 11, 2019, for ($59.99). They look like this : ![]() The Next in these lowers run is the The M16A2 lower. Finish: Black, Hardcoat Anodized Caliber: Multi Fire Selector: "SAFE" (Safe), "SEMI" (Fire), "BURST" (Full-Auto) These limited-edition lowers are made using the most advanced aerospace manufacturing technology to produce the industries finest, forged Mil-Spec lowers. Our receivers are machined on a multimillion-dollar, automated, manufacturing system that enables us to produce a product of unequaled quality and value. These forged lowers are quality made using material is 7075-T6 and are marked "CAL. 5.56 MM." to accommodate most builds. The finish is black hard coat anodizing per Mil-8625 Type 3 class 2. There were a total production run of only ???? Made . These went on sale on or around December 17, 2019, for ($49.99). They look like this : ![]() The Next in these lowers run is the The BOATING-15 lower. Finish: Black, Hardcoat Anodized Caliber: Multi Fire Selector: are three different Pictogram images of a boating accident Palmetto State Armory’s limited-edition "BOATING-15™" lower will only be available once. The "BOATING-15™” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "BOATING-15™" Lower will accommodate all AR-15 platform builds and is marked "BOATING-15™ MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only 1000 Made . These went on sale on or around November 19, 2019, for ($49.99). They look like this : ![]() The Next in these lowers run is the The KAG-15 lower. Finish: Black, Hardcoat Anodized Caliber: Multi Fire Selector: "2016" (Safe), "STILL YOUR PRESIDENT" (Fire), "2020" (Full-Auto) Palmetto State Armory’s limited-edition "KAG-15™" lower will only be available once. The "KAG-15™” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "KAG-15™" Lower will accommodate all AR-15 platform builds and is marked "KAG-15™ MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only 5393 Made . These went on sale on or around November 20, 2019, for ($49.99). They look like this : ![]() The Next in these lowers run is the The ISRAEL-15 lower. Finish: Black, Hardcoat Anodized, Caliber: Multi, Fire Selector: in hebrew writing Palmetto State Armory’s limited-edition "ISRAEL-15" lower will only be available once. The "ISRAEL-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "ISRAEL-15" Lower will accommodate all AR-15 platform builds and is marked "ISRAEL-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only 2000 Made . These went on sale on or around January 2, 2020, for ($49.99). They look like this : ![]() The Next in these lowers run is the The SABERFERRET-15 lower. Fire Selector: "NICE KITTY" (Safe), "GETTIN SQUIRRELY" (Fire), "RABID RODENT" (Full-Auto) Palmetto State Armory’s limited-edition "SABERFERRET-15™" lower will only be available once. The "SABERFERRET-15™” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "SABERFERRET-15™" Lower will accommodate all AR-15 platform builds and is marked "SABERFERRET-15™ MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only 500 Made . These went on sale on or around February 5, 2020, for ($49.99). They look like this : ![]() The Next in these lowers run is the The DEERHUNTER-15 lower. Fire Selectors are images of a deer, rifle scope sights, and a Rack. The "DEERHUNTER-15™” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "DEERHUNTER-15™" Lower will accommodate all AR-15 platform builds and is marked "DEERHUNTER-15™ MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only ???? Made . These went on sale on or around February 25, 2020, for ($49.99). They look like this : ![]() The Next in these lowers run is the The LIBERTY-15 lower. Fire Selector: "WE" (Safe), "THE" (Fire), "PEOPLE" (Full-Auto) The "LIBERTY-15™” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "LIBERTY-15™" Lower will accommodate all AR-15 platform builds and is marked "LIBERTY-15™ MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only ???? Made . These went on sale on or around February 25, 2020, for ($49.99). They look like this : ![]() The Next in these lowers run is the The SPACEPIRATE-15 lower. Fire Selector: "RUM" (Safe), "ROUGH SEAS" (Fire), "DESTINY" (Full-Auto) The "SPACEPIRATE-15™” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "SPACEPIRATE-15™" Lower will accommodate all AR-15 platform builds and is marked "SPACEPIRATE-15™ MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only 500 Made . These went on sale on or around February 26, 2020, for ($49.99). They look like this : ![]() The Next in these lowers run is the The M16a4 Clone-15 lower. Fire Selector: "SAFE" (Safe), "SEMI" (Fire), "BURST" (Full-Auto) These limited-edition lowers are made using the most advanced aerospace manufacturing technology to produce the industries finest, forged Mil-Spec lowers. Our receivers are machined on a multimillion-dollar, automated, manufacturing system that enables us to produce a product of unequaled quality and value. These forged lowers are quality made using material is 7075-T6 and are marked "CAL. 5.56MM." to accommodate most builds. The finish is black hard coat anodizing per Mil-8625 Type 3 class 2. There were a total production run of only ???? Made . These went on sale on or around March 2, 2020, for ($49.99). They look like this : ![]() The Next in these lowers run is the The M4 Carbine-15 lower. Fire Selector: "SAFE" (Safe), "SEMI" (Fire), "BURST" (Full-Auto) These limited-edition lowers are made using the most advanced aerospace manufacturing technology to produce the industries finest, forged Mil-Spec lowers. Our receivers are machined on a multimillion-dollar, automated, manufacturing system that enables us to produce a product of unequaled quality and value. These forged lowers are quality made using material is 7075-T6 and are marked "CAL. 5.56MM." to accommodate most builds. The finish is black hard coat anodizing per Mil-8625 Type 3 class 2. There were a total production run of only ???? Made . These went on sale on or around March 4, 2020, for ($49.99). They look like this : ![]() The Next in these lowers run is the The ANGRYJOE-14 lower. Fire Selector - Left Side: "WUD HE SAY?" (Safe), "DOGFACED PONYSOLDIER" (Fire), "FULLA SH!T" (Full-Auto) Fire Selector - Right Side: "MEMORY LOSS" (Safe), "DEMENTIA" (Fire), "LIBERAL" (Full-Auto) Palmetto State Armory’s limited-edition "ANGRYJOE-14" AR-15 lower will only be available once. Only 2,000 of these were going to be made, but by midnight they had sold 1500 of them, so PSA upped the total to 5000 since they were so popular and thus now, 5000 total are going to be made, so all serial numbers will be #1 through #5000. Many people noticed this on the forum and were irritated by it. But it is a. Capitalist world, and PSA is in it to make money, so deal with it. The "ANGRYJOE-14" lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "ANGRYJOE-14" AR-15 Lower will accommodate all AR-15 platform builds and is marked "ANGRYJOE AR-14 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only ???? Made . These went on sale on or around March 11, 2020, as a 8-10 week PREORDER for ($49.99). They look like this : ![]() The Next in these lowers run is the The ELKHUNTER-10 lower. Fire Selector - Image of an Elk (Safe), Scope Crosshairs Image (Fire), Elk's Head Image (Full-Auto) The new and improved Palmetto State Armory PA10 Gen3 .308 lower is fully assembled and ready for your complete PA10 Gen3 Upper! Based on customer feedback we are pleased to announce the Gen 3 PA-10 Complete Lower Receiver! Using forged 7075-T6 aluminum, these lowers are precision machined and then black anodize hard coated to MIL-8625 Type 3 class 2 specifications. This complete lower will include a Mil-Spec AR15 fire control group with PSA Classic stock and pistol grip. The PSA PA10 allows the same configuration flexibility as enjoyed by the AR15 and is an ideal platform for the .308 cartridge. Gen 3 enhancements at a glance: Lower includes relief cuts for a broader compatibility with .308 BCG’s. Twice staked castle nuts Standardized carbine length buffer tube with short, heavy buffer The Gen3 PA10 receivers are functionally compatible with the Gen1 and Gen2 upper receivers, however, we recommend matching Gen3 lowers to Gen3 uppers for best appearance and performance. There are external cosmetic differences when mixing Gen1 with Gen2 and Gen3 upper and lower receivers that some may not find appealing. The AR10 platform does not enjoy a common design between manufacturers, like the AR15. As a result, there can and will be subtle differences in the parts kits of various manufacturers. Some parts, like the fire control group, are shared with the AR15 platform to preserve the options for upgrading. For best results, we recommend only using PSA PA10 parts with our uppers and lower receivers. We do not recommend using other manufacturers parts in our products. There were a total production run of only ???? Made . These went on sale on or around April 14, 2020, As a complete lower built for ($179.99). They look like this : ![]() The Next in these lowers run is the BOARHUNTER-15 lower. Fire Selector - Image of an Boar (Safe), Scope Crosshairs Image (Fire), Boar's Head Image (Full-Auto) The "BOARHUNTER-15™” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "BOARHUNTER-15™" Lower will accommodate all AR-15 platform builds and is marked "BOARHUNTER-15™ MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only ???? Made . These went on sale on or around April 14th, 2020, for ($49.99). They look like this : ![]() The Next in these lowers run is the BABYSNEK-9 lower. Fire Selector: "NO STEPPY" (Safe), "STEPPY" (Fire), "TANTWUM" (Full-Auto) Palmetto State Armory’s limited-edition "LILBITE-9" Baby Snek lower will only be available once. The "LILBITE-9" lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged lowers. This PSA lower is made using our Manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. The lower is partially assembled with a proprietary magazine catch and ejector, ready for all your standard AR-15 lower parts to build into a fully functioning lower. Non-Last Round Bolt Hold Open. Accepts standard AR-15 fire control groups, bolt catch, take down & pivot pins, springs & detents, safety selector as well as stock, buffer tube, and grips. Must be used with a Palmetto State Armory Hybrid 9mm Upper. There were a total production run of only ???? Made . These went on sale on or around May 4th, 2020, for ($149.99). They look like this : ![]() The Next in these lowers run is the ROSIE-15 lower. Fire Selector: "WWII Icon" (Safe), "Red White & Blue" (Fire), "We Can Do It!" (Full-Auto) Palmetto State Armory’s limited-edition "Rosie-15" lower will only be available once. The "Rosie-15" lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed, and use 7075-T6 Aluminum. The Palmetto State Armory "Rosie-15" Lower will accommodate all AR-15 platform builds and is marked "Rosie-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only ???? Made . These went on sale on or around May 27th, 2020, for ($49.99). They look like this : ![]() The Next in these lowers run is the TURKEYGUNR-15 lower. This lower is the Meme Lower for Thanksgiving 2020. It first went on preorder sales on 11/25/2020 and was released by a late email blast. It was one of only two lowers that will be released in the fall of 2020 after the election due to how buy and hard it is to keep up production on regular lowers much less these specialty lowers. Keep your eyes open for the next Meme lower, the Christmas 2020 Lower!!! Finish: Black, Hardcoat Anodized Caliber: Multi Fire Selector: "TABLES TURNED" (Safe), "FUDD HUNT" (Fire), "MOTHER CLUCKER" (Full-Auto) California Buyers - stripped lowers are sent to California as "Long Guns" only. Please make sure the business name of the FFL you will be using is on your order. FEATURES: The "TURKEYGUNR-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "TURKEYGUNR-15" Lower will accommodate all AR-15 platform builds and is marked "TURKEYGUNR-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only ???? Made . These went on sale on or around November 25th, 2020, for ($99.99). They look like this : ![]() The Next in these lowers run is the NUTCRACKER-15 lower. This lower is the Meme Lower for Christmas 2020. It first went on preorder sales on 12/02/2020 and was released by a late email blast. It was one of only two lowers that will be released in the fall of 2020 after the election due to how buy and hard it is to keep up production on regular lowers much less these specialty lowers. Finish: Black, Hardcoat Anodized Caliber: Multi California Buyers - stripped lowers are sent to California as "Long Guns" only. Please make sure the business name of the FFL you will be using is on your order. FEATURES The "Nutcracker-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "Nutcracker-15" Lower will accommodate all AR-15 platform builds and is marked "Nutcracker-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. There were a total production run of only ???? Made . These went on sale on or around December 2nd, 2020, for ($99.99). They look like this : ![]() The Next in these lowers run is the TYRANNY-15 lower. This lower is the Meme Lower for June 2021. It first went on preorder sales on 06/25/2021 and was released by a email blast. Finish: Black, Hardcoat Anodized Caliber: Multi California Buyers - stripped lowers are sent to California as "Long Guns" only. Please make sure the business name of the FFL you will be using is on your order. FEATURES Palmetto State Armory’s limited-edition "Tyranny-15" lower will only be available once. The "Tyranny-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million-dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory “Tryanny-15” Lower will accommodate all AR-15 platform builds and is marked "Tyranny-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. Serial # Range: “TJEFFERSON0000” Fire Selector: "Freedom" (Safe), "F-15" (Fire), "Nukes" (Full-Auto) There were a total production run of only ???? Made . These went on sale on or around June 25th, 2021, for ($79.99). They look like this : ![]() The Next in these lowers run is the LETSGO-15 lower. This lower is the Meme Lower for October 2021. It first went on preorder sales on 10/19/2021 and was released by a email blast. Finish: Black, Hardcoat Anodized Caliber: Multi California Buyers - stripped lowers are sent to California as "Long Guns" only. Please make sure the business name of the FFL you will be using is on your order. FEATURES Palmetto State Armory’s limited-edition "LETSGO-15" lower will only be available once. The "LETSGO-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million-dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed, and use 7075-T6 Aluminum. The Palmetto State Armory “LETSGO-15” Lower will accommodate all AR-15 platform builds and is marked "LETSGO-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. Serial # Range: “BRANDON 0000” Fire Selector: "F@CK!" (Safe), "JOE!" (Fire), "BIDEN!" (Full-Auto) There were a total production run of only ???? Made . These went on sale on or around October 19th, 2021, for ($59.99). They look like this : ![]() The Next in these lowers run is the VATIPANTS-15 lower. This lower is the Meme Lower for November 2021. It first went on preorder sales on 11/01/2021 and was released by a email blast. Finish: Black, Hardcoat Anodized Caliber: Multi California Buyers - stripped lowers are sent to California as "Long Guns" only. Please make sure the business name of the FFL you will be using is on your order. FEATURES Palmetto State Armory’s limited-edition "Vatipants-15" lower will only be available once with a limited run of 2,000 available. The "Vatipants-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million-dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory “Vatipants-15” Lower will accommodate all AR-15 platform builds and is marked "Tyranny-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. Caliber: Multi Serial # Range: “SLIPPED1 0000” Fire Selector: "SEE DA POPE" (Safe), "SEE DA POOP" (Fire), "DA PENDS" (Full-Auto) There were a total production run of only ???? Made . These went on sale on or around November 1st, 2021, for ($59.99). They look like this : ![]() The Next in these lowers run is the PEACUCK-15 lower. This lower is the Meme Lower for November 5 2021. It first went on preorder sales on 11/05/2021 and was released by a email blast. FEATURES In honor of our "esteemed" corporate propaganda fake news media, Palmetto State Armory is proud to announce the "PEACUCK-15". The "PEACUCK-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million-dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed, and use 7075-T6 Aluminum. The Palmetto State Armory “PEACUCK-15” Lower will accommodate all AR-15 platform builds and is marked "PEACUCK-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. . Caliber: Multi Serial # Range: “TRASH 00000” Fire Selector: "FAKE NEWS" (Safe), "PROPAGANDA" (Fire), "LETS GO KAREN" (Full-Auto) There were a total production run of only ???? Made . These went on sale on or around November 5th, 2021, for ($59.99). They look like this : ![]() The Next in these lowers run is the NADATURKEY-15 lower. This lower is the Meme Lower for November 19th 2021. It first went on preorder sales on 11/19/2021 and was released by a email blast. FEATURES The "NADATURKEY-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million-dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed, and use 7075-T6 Aluminum. The Palmetto State Armory “NADATURKEY-15” Lower will accommodate all AR-15 platform builds and is marked "NADATURKEY-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. PSA "NADATURKEY-15" Stripped Lower Receiver Caliber: Multi Serial # Range: “WOOFWOOF 0000” Fire Selector: "PLUCK URSELF!" (Safe), "GET BASTED!" (Fire), "GOLDEN TANNED!" (Full-Auto) There were a total production run of only ???? Made . These went on sale on or around November 19th, 2021, for ($59.99). They look like this : ![]() The Next in these lowers run is the CHRISTMAS-15 lower. This lower is the Meme Lower for November 29th 2021. It first went on preorder sales on 11/29/2021 and was released by a email blast. FEATURES The "CHRISTMAS-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million-dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed, and use 7075-T6 Aluminum. The Palmetto State Armory “CHRISTMAS-15” Lower will accommodate all AR-15 platform builds and is marked "CHRISTMAS-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. PSA "CHRISTMAS-15" Stripped Lower Receiver Caliber: Multi Serial # Range: “2021 0000” The Selector markers are Icons instead of words. There were a total production run of only ???? Made . These went on sale on or around November 29th, 2021, for ($59.99). They look like this : ![]() The Next in these lowers run is the RTB-15 lower. This lower is the Meme Lower for January 1, 2022. It also was optioned first to be given away when a user signed up for the Right To Bear Insurance that was launched at the same time. FEATURES The "RTB-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million-dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed, and use 7075-T6 Aluminum. The Palmetto State Armory “RTB-15” Lower will accommodate all AR-15 platform builds and is marked "RTB-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. PSA "RTB-15" Stripped Lower Receiver Caliber: Multi Serial # Range: "00000 - 10000" Fire Selector: "HIBERNATE" (Safe), "PROTECT" (Fire), "ROAR" (Full-Auto) There were a total production run of only ???? Made . These went on sale on or around January 1, 2022, for at first only included with an insurance policy purchase later able to be purchased at ($49.99). They look like this : ![]() The Next in these lowers run is the GHOSTGUN-15 lower. This lower was released on 4-26-22. The "GHOSTGUN-15" lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "GHOSTGUN-15" AR-15 lower receiver will accommodate all AR-15 platform builds and is marked "GHOSTGUN-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. Finish: Black, Hardcoat Anodized Caliber: Multi Fire Selector: "80%" (Safe), "100%" (Fire), "FUJB" (Full-Auto) There were a total production run of only ???? Made . These went on sale on or around April 26, 2022, for and were able to be purchased at ($59.99). They look like this : ![]() The Next in these lowers run is the OK-KAREN-15 lower. This lower was released on 4-27-22. FEATURES The "OK-KAREN-15" lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory "OK-KAREN-15" AR-15 lower receiver will accommodate all AR-15 platform builds and is marked "OK-KAREN-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. Finish: Black, Hardcoat Anodized Caliber: Multi Fire Selector: "GET THE MANAGER" (Safe), "AND THE SUPERVISOR" (Fire), "AND THE CEO" (Full-Auto) There were a total production run of only ???? Made . These went on sale on or around April 27, 2022, for and were able to be purchased at ($59.99). They look like this : ![]() The Next in these lowers run is the HR516 - M16a1 Retro lower. This lower was released on 7-22-22. FEATURES The "HARRINGTON & RICHARDSON RETRO M16A1 LOWERS RECEIVER, GRAY" lower is back!!! Retro lowers are back! New manufactured from our proprietary NoDak Spud dies. Material is 7075-T6 and are marked with the Vintage 1960's Harrington & Richardson Lion Logo. The finish is Gray type 3 hard coat anodizing. Serial numbers replicate the original 2,000,000 range but with an HR prefix These forged lowers are quality made, H&R Forged 7075 Aluminum Gray Hardcoat Anodized Caliber 5.56 Safe/Semi/Auto markings & the H&R Logo Fire Selector: "Safe" (Safe), "Semi" (Fire), "Auto" (Full-Auto) There were a total production run of only ???? Made . These went on sale on or around July 22, 2022, for and were able to be purchased at ($159.99). They look like this : ![]() The Next in these lowers run is the HALLOWSEVE-15 lower. This lower was released on 10-28-22. FEATURES Palmetto State Armory’s limited-edition "HALLOWSEVE-15" lower will only be available once with a limited run of 2,000 available. The "HALLOWSEVE-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million-dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality-made, MIL-SPEC designed, and use 7075-T6 Aluminum. The Palmetto State Armory “HALLOWSEVE-15” Lower will accommodate all AR-15 platform builds and is marked "HALLOWSEVE-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. Caliber: Multi Serial # Range: “CREEP000000” There were a total production run of only ???? Made . These went on sale on or around October 28, 2022, for and were able to be purchased at ($59.99). They look like this : ![]() The Next in these lowers run is the MUGSHOT-15 lower. This lower was released on 11-19-22. FEATURES The "MUGSHOT-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million-dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality made, MIL-SPEC designed, and use 7075-T6 Aluminum. The Palmetto State Armory “MUGSHOT-15” Lower will accommodate all AR-15 platform builds and is marked "MUGSHOT-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. PSA "MUGSHOT-15" Stripped Lower Receiver Caliber: Multi Serial # Range: “NOTAMEAL000000” Fire Selector: "COLD TURKEY" (Safe), "BAD EGG" (Fire), "FOUL PLAY" (Full-Auto) There were a total production run of only ???? Made . These went on sale on or around November 19, 2022, for and were able to be purchased at ($59.99). They look like this : ![]() The Next in these lowers run is the XMAS-15 lower. This lower was released on 12-06-22. FEATURES The "XMAS-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million-dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality-made, MIL-SPEC designed, and use 7075-T6 Aluminum. The Palmetto State Armory “XMAS-15” Lower will accommodate all AR-15 platform builds and is marked "XMAS-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. PSA "XMAS-15" Stripped Lower Receiver Caliber: Multi Serial # Range: “2022-000000” Fire Selector: "CHRISTMAS TREE" (Safe), "SNOWMAN" (Fire), "STOCKING" (Full-Auto) There were a total production run of only ???? Made . These went on sale on or around December 6, 2022, for ($59.99). They look like this : ![]() PSA Summerville Exclusive Etched Randall RacoonPSA-15 lower. This lower was released on or about August 17, 2018. FEATURES Randall the Racoon PSA-15 Multi-15 lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million-dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality-made, MIL-SPEC designed, and use 7075-T6 Aluminum. The Palmetto State Armory “XMAS-15” Lower will accommodate all AR-15 platform builds and is marked "XMAS-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. PSA "RANDALLRACCOON" Stripped Laser Engraved Lower Receiver Caliber: Multi Serial # Range: “Unknown”Fire Selector: "SAFE" (Safe), "FIRE" (Fire) There were a total production run of only ???? Made . These went on sale on or around August 17, 2018, for ($49.99). They look like this : ![]() The Next in these lowers run is the WHATSNEXT-15 lower. This lower was released on or around - 01-16-23. FEATURES The "WHATNEXT-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million-dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality-made, MIL-SPEC designed, and use 7075-T6 Aluminum. The Palmetto State Armory “WHATNEXT-15” Lower will accommodate all AR-15 platform builds and is marked "WHATNEXT-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. PSA "WHATNEXT-15" Stripped Lower Receiver Caliber: Multi Serial # Range: “ALLGAS0000” There were a total production run of only ???? Made . These went on sale on or around January 16, 2023, for ($59.99). They look like this : ![]() The Next in these lowers run is the NoFlyZone-15 lower. This lower was released on or around - 02-06-23. FEATURES The "NOFLYZONE-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million-dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality-made, MIL-SPEC designed, and use 7075-T6 Aluminum. The Palmetto State Armory “NOFLYZONE-15” Lower will accommodate all AR-15 platform builds and is marked "NOFLYZONE-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. PSA "NOFLYZONE-15" Stripped Lower Receiver Caliber: Multi Serial # Range: “CHINA00000” Fire Selector: "BIRD" (Safe), "PLANE" (Fire), "SPYBALLOON" (Full-Auto) There were a total production run of only ???? Made . These went on sale on or around February 06, 2023, for ($59.99). They look like this : ![]() The Next in these lowers run is the "BRACE-15" lower. This lower was released on or around - 02-09-23. FEATURES The "BRACE-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million-dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality-made, MIL-SPEC designed, and use 7075-T6 Aluminum. The Palmetto State Armory “BRACE-15” Lower will accommodate all AR-15 platform builds and is marked "BRACE-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. Here at Palmetto State Armory, we believe the BATF has clearly overstepped its constitutional authority. The most egregious example of this is the January 31, 2023 pistol brace ruling, and other arbitrary and capricious rules over the years. The best way to reign in the BATF is through the legal system. Palmetto State Armory is a key member of the Federal Regulatory Accountability Coalition (FRAC). We are donating time, money, and resources as a member of FRAC to help spearhead a legal challenge to this rule that we have filed in court today (February 9th, 2023). We believe this lawsuit has a very good chance of stopping the ATF's unconstitutional overreach. If you would like to contribute and be part of this effort, $10 from the purchase of each BRACE-15 lower will be donated to FRAC in support of this lawsuit. This litigation is suspected to cost several million dollars and if you are looking for a way to help, purchasing this lower will help fund this effort. https://www.fracaction.org/ Link to litigation/docket page: https://www.fracaction.org/challenging-atf-brace-rule PSA "BRACE-15" Stripped Lower Receiver Caliber: Multi Serial # Range: “SHOULDER00000” Fire Selector: "2A" (Safe), "OVER REACH" (Fire), "OVERTURN" (Full-Auto) There were a total production run of only ???? Made . These went on sale on or around February 09, 2023, for ($59.99). They look like this : ![]() The Next in these lowers run is the "SHEEPDOG-15" lower. This lower was released on or around - 03-21-23. FEATURES On November 5, 2017, Stephen Willeford heard gunshots coming from the nearby First Baptist Church. Without hesitation, he grabbed his AR-15 rifle and sprinted barefoot toward the danger. Upon arrival, he confronted the shooter- who was clad in body armor- exchanged gunfire, and ultimately wounded him, which led to the shooter fleeing the scene. Willeford then flagged down a passing motorist, Johnnie Langendorff, and they pursued the shooter together. Willeford's swift actions undoubtedly saved many lives that fateful day. In the aftermath of the tragedy, Willeford has become a symbol of bravery and an advocate for preparedness and responsible gun ownership, and now is a spokesperson for Gun Owners of America (GOA). In honor of Stephen's bravery, and GOA's fight for our 2nd amendment rights, Palmetto State Armory is proud to partner with GOA and release this commemorative lower. $10 Dollars from the sale of each lower will be donated to Gun Owners of America. Palmetto State Armory’s "Sheepdog-15” lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million-dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value. These forged lowers are quality-made, MIL-SPEC designed, and use 7075-T6 Aluminum. The Palmetto State Armory “Sheepdog-15” Lower will accommodate all AR-15 platform builds and is marked "Sheepdog-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black. PRODUCT DETAILS This fundraiser is being promoted in conjunction with Palmetto State Armory and the Gun Owners of America to promote freedom across the country. $10 Dollars from the sale of each Sheepdog-15 lower will be donated to Gun Owners of America. PSA "Sheepdog-15" Stripped Lower Receiver Caliber: Multi Serial # Range: “BFD 000000” Fire Selector: "SAFETY" (Safe), "LIBERTY" (Fire), "GOA" (Full-Auto) These went on sale on or around March 21, 2023, for ($59.99). They look like this : ![]() This concludes the Thread Updates listed Below: last edit(s) : 01/01/14 to correct information Regarding the Stealth Lowers. 01/11/14 Added 308 lower reveal 01/31/14 Added PSA American Hero Series Lowers, added photos to .308 listing as well. 02/15/14 Added PSA descriptions, pricing and stock photos for the "american hero series lowers" 05/29/14 Added American Hero Series 2 Lowers, the DS-Kuait, and Vietnam. Also gave the 308 lower an AR-10 series area of its own and re-arranged some of the thread for better organization of information. 08/15/14 Added PA-10 .308 Lowers to the thread, and photo of said lower. 10/18/14 Added P-TAC 10 .308 Lowers to the Thread and Photo of said lower. 12/29/14 Added P-TAC 15 MULTI lowers to the Thread and Photo of said lowers. 05/27/15 Updated Images that links were busted due to PSA main web page changes. - Missing Kuwait Lower Picture still. 06/13/15 Added PSA Cerakoted special edition lowers - These are limited run lowers. 08/25/15 Added PSA US Flag and PSA South Carolina Flag Engraved Lowers. 05/06/16 Corrected OEF, OIF, And Kuwait lower image failures. Added AR9 Glock and colt lowers, as well as KS47 Lower options. Added image and description of SC Strong lower. 06/17/16 Added General Date range for AP serialized lowers (kinda a born on date) 07/07/16 Added PSA Billet Upper and Lower Set 07/07/16 Added PI prefix lower receivers, with photos 03/14/17 Added Glock 9mm Bolt hold open lowers, edited time frames for AP run lowers. Changed information for AR10 markings. included PA,PF,PI, and other P* markings listings. Added PSA AR10 Gen 2 Lowers, edited the Limited edition coated lowers to include OD green, and also to correct coating information. 03/14/17 Added SCD lower receivers. 03/16/17 Added photos of SCD lower receivers without trigger guard. -----------2018 Edits----------- 10/07/18 - Updates to lower types, and Changed photo host over to FlickR, as Photobucket started charging for hosting. Please let me know of any errors or issues. 10/13/18 - Updated the Hardcoat green Anodized Lower receiver by adding photos of it from a good friend. -----------2019 Edits----------- 07/23/19 - Updated the thread to cover most of the MEME lowers that have been produced in the last year and a half. 07/23/19 - Added PSA Billet Set from the PSA Custom Series line. 07/25/19 - Spelling corrections and link edits. 07/26/19 - Added the "FCancer" lower and details. 07/31/19 - Added production numbers for some of the MEME lowers, (special thanks to Bucko1975 for his help) 08/09/19 - Added the Black Friday Limited edition Store Lowers, and notated the MEME ar10 lowers are all GEN 3 AR-10 lowers. 09/18/19 - Added NOBETO and SpaceRover lowers as well as added true count of lowers produced for YEET15's 09/19/19 - Added HEROES-15 Lower receivers. 09/25/19 - Added BabyPFG-15 Lower receiver. 10/21/19 - Added Screw Cancer and GrumpyCat Lower Receivers. 10/25/19 - Added FRANKENGUN-15 Lower Receivers. 11/13/19 - Added MAGA and Gambler Lower receivers, prepped for PSA Custom Colored Series lowers. 11/18/19 - Added TRASHPANDA-15 Lower Receiver. 12/11/19 - Added VIRGINIA-15 Lower receiver release. 12/17/19 - Added M16a2 Lower receiver release. 12/20/19 - Added Boating accident and Keep America Great (KAG) lower receiver releases. -----------2020 Edits----------- 01-02-20 - Added ISRAEL-15 Lower receiver release. 02-05-20 - Added SABERFERRET-15 Lower receiver release. 02-25-20 - Added DEERHUNTER-15 Lower & the LIBERTY-15 Receiver release. 02-26-20 - Added SPACEPIRATE-15 Lower receiver release. 03-02-20 - Added M16a4 Lower Receiver. 03-04-20 - Added M4 Carbine Lower Receiver. 03-11-20 - Added ANGRYJOE-14 Lower Receiver Preorder Release. 03-14-20 - Edited ANGRYJOE-14 Lower information, added correct numbers to be Produced after PSA increased total production. 05-27-20 - Edited ELKHUNTER-10, BOARHUNTER-15, BABYSNEK-9, and ROSIE-15 Lower Receivers Added to the list. Boarhunter release date is estimated. 08-11-20 - Added THERIGHTTO-15 lower receiver. 08-21-20 - Edited Edited All Images, Adjusted Sizes, corrected any corrections that were necessary to correct. Added preliminary total meme number produced to each Meme posted. 08-21-20 - ADDED ACTUAL PRODUCTION NUMBERS TO MEME LOWERS - In Progress of updates as they come from PSA. What is posted is current and ACCURATE for each lower thus far. 08-21-20 - Edited BETSY-15 Lower has incorrect alternate side flag etching. Posted correct flag direction lowers and comments about issue. Credited to @chargerdude70 for bringing the issue to me. 11-28-20 - Added TURKEYGUNR-15 Lower Receiver and information. 12-02-20 - Added NUTCRACKER-15 Lower Receiver and information. -----------2021 Edits----------- 09-25-21 - Added Tyranny-15 Lower Receiver and information. 10-19-21 - Added LETSGO-15 Lower Receiver and information. 11-01-21 - Added VATIPANTS-15 Lower Receiver and information. 11-05-21 - Added PEACUCK-15 Lower Receiver and information. 11-19-21 - Added NADATURKEY-15 Lower Receiver and information. 12-02-21 - Added CHRISTMAS-15 Lower Receiver and Information -----------2022 Edits----------- 03-12-22 - Added Right to Bear RTB-15 Lower Receiver and information. 05-09-22 - Added GHOSTGUN-15 and OK-KAREN-15 Lower Receivers and information. 08-20-22 - Added HR516 Herrington and Richardson Retro M16a1 Grey lower receiver and information. 11-14-22 - Added HALLOWSEVE-15 Lower receiver and information. 12-06-22 - Added MUGSHOT-15, XMAS-22, RANDALLRACCOON MULTI-15 Lower receivers and the information for each. -----------2023 Edits----------- 02-06-23 - Added WhatsNext-15 and NoFlyZone-15 Lower Receivers and information. Edited Randal Raccoon to include Date & Price (thanks to cthompson07 for his assistance with this information. 02-09-23 - Added the Brace-15 lower receiver and information. this lower is a preorder lower. 07-10-23 - Added the Myrtle Beach Store lower, added the SHEEPDOG-15 lower receiver and information as accurate as possible at this time. |
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
Great write-up Cocky! Thank you for laying this out.
|
|
|
Originally Posted By GamecockOperator:
We will start with the PSA AP Lowers. They are the first Lowers that PSA released. I believe they were released around 2008-2009. Then re-introduced in 2013. Second run PSA lowers, are known as the LW lowers. They to my knowledge came in only Safe / Fire lowers. View Quote |
|
...and when Santa squeezes his fat white ass down that chimney tonight, he's gonna find the jolliest bunch of assholes this side of the nuthouse.
|
Thanks for putting this together. I'd so like to say thanks for wording something a particular way such that it caused me to go do a search and learn something. I'd always seen their descriptions, and also questions being asked about, whether lowers were "high shelf" or "low shelf". I always took this to be the equivalent of "top shelf" or "bottom shelf", meaning there was a difference in quality somehow.
However, in one section above, you specifically said "they have LOW shelves"...and the use of "have" instead of "are" sent me to Google. Which of course found threads right back here on AR15.com, and I read about RDIAS. And now I know. Just thought I'd point that out in case any of you knuckleheads assumed the same thing. ![]() |
|
|
LW lowers came in both pictogram and safe/fire. I have both. Great write up GCO!
|
|
Proud member of Team Ranstad.
|
Thanks for posting this. I wish I coulda got a NOBO.
|
|
"Golf is a willing waste of a perfectly good rifle range" - Lt.Col. Dave Grossman.
|
Originally Posted By Kevin_Jensen:
I have "LW" lowers with safe/fire and bullet pictograms. View Quote View All Quotes View All Quotes Originally Posted By Kevin_Jensen:
Originally Posted By GamecockOperator:
We will start with the PSA AP Lowers. They are the first Lowers that PSA released. I believe they were released around 2008-2009. Then re-introduced in 2013. Second run PSA lowers, are known as the LW lowers. They to my knowledge came in only Safe / Fire lowers. |
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
Originally Posted By BigWaylon:
Thanks for putting this together. I'd so like to say thanks for wording something a particular way such that it caused me to go do a search and learn something. I'd always seen their descriptions, and also questions being asked about, whether lowers were "high shelf" or "low shelf". I always took this to be the equivalent of "top shelf" or "bottom shelf", meaning there was a difference in quality somehow. However, in one section above, you specifically said "they have LOW shelves"...and the use of "have" instead of "are" sent me to Google. Which of course found threads right back here on AR15.com, and I read about RDIAS. And now I know. Just thought I'd point that out in case any of you knuckleheads assumed the same thing. ![]() View Quote thanks man.. yea lots of folks dont know what it means, and hopefully this helps alot of folks out. |
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
We got lucky when we saw the NOBOS come up, and picked up 5 for our family.
thanks for the compliments and information y'all. I do appreciate it. Most of this was from memory and what not. Lets hope we can get PSA to Sticky it, but my brother seems to think im being overly descriptive and giving away too many of their secrets in the thread. LOL. PSA What Say you? |
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
What does "low shelf" mean?
|
|
That's a fact jack!
|
Originally Posted By jeep450: What does "low shelf" mean? View Quote I found the below info here : High Shelf vs. Low Shelf and the image on it is good as well : ![]() The red circle shows the desired shelf height. As a quick gun show rule the bottom of the safety/selector hole to the shelf should be 1/4 inch. Anything less is a high shelf. the low shelf is only useful with a drop in removable auto sear conversion. |
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
Thanks for the info!
|
|
|
welcome man.
now if we can just get PSA to sticky it... :/ ![]() ![]() ![]() ![]() ![]() |
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
I realllly want a YOU LIE lower
![]() |
|
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
So i guess by the failure for PSA to sticky this means they dont plan to...
|
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
Only site staff can sticky the thread.
|
|
Palmetto State Armory
200 Business Park Blvd Columbia, SC 29203 Web Sales: 803.788.9095 [email protected] |
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
Thanks for the info... and the startpage search for the shelf height thingie.
|
|
Award: 24/365 Most likely to be an appendix.
"Arfcom makes me happy. Arfcom is like a giant, heavily armed, dysfunctional family that smells like cheetos and gun oil." - Undefined |
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
I just received two consecutive numbered PSA LW prefix "BLEM" lowers that are low shelf.
AL |
|
|
Originally Posted By Cavitation:
I just received two consecutive numbered PSA LW prefix "BLEM" lowers that are low shelf. AL View Quote ok do we have any more confirmations of low shelfs with LW lowers? id like to get at least 10 confirms here for editing that they are both high and low shelves. ALSO PSA is it ok to seek an admin's assistance to sticky this thread in your forum? I believe PSA you could sticky it if you were to edit the first post on this thread. |
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
Thanks, very good info.
The blem lowers I got in were AP so im pretty happy! |
|
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
bump for sticky.. and yes i'll be persistant on this. :)
|
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
Very helpful! hope it clears up some confusion for some people
|
|
ΜΟΛΩΝ ΛΑΒΕ
|
Industry Partners have the ability to tack/sticky a thread within their own forum.
|
|
"Shooting at a fixed target is only a step towards shooting at a moving one like a man."
-Lord Robert Baden-Powell |
Originally Posted By kaw7rider:
Very helpful! hope it clears up some confusion for some people View Quote View All Quotes View All Quotes Originally Posted By kaw7rider:
Very helpful! hope it clears up some confusion for some people Thanks man. that was the goal. Originally Posted By ManBearPack:
Industry Partners have the ability to tack/sticky a thread within their own forum. that was my thoughts too man. maybe that rep doesnt know how or doesnt think it should happen. well psa? balls in your court? can we get a sticky? |
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
Reluctance to "sticky" may be due to an inaccurate assumption regarding their source for a receiver. If they approved a sticky and
it was discovered that FN was not the source for the "stealth" receiver, or that low shelf items were furnished by a vendor who supposedly doesn't furnish them; their integrity and honesty could be called into question. Don't know this to be true, but it would explain their reluctance to endorse any information as fact. Just my 2 cents worth, since we couldn't get a yea or nay on the stealth/SC question of sourcing. Did read everyone's comments though, and it would seem the stealth is not FN. Cancelled my order for the stealth and went for a Spike's, since there is no question of the source. |
|
|
Originally Posted By AZJim:
Reluctance to "sticky" may be due to an inaccurate assumption regarding their source for a receiver. If they approved a sticky and it was discovered that FN was not the source for the "stealth" receiver, or that low shelf items were furnished by a vendor who supposedly doesn't furnish them; their integrity and honesty could be called into question. Don't know this to be true, but it would explain their reluctance to endorse any information as fact. Just my 2 cents worth, since we couldn't get a yea or nay on the stealth/SC question of sourcing. Did read everyone's comments though, and it would seem the stealth is not FN. Cancelled my order for the stealth and went for a Spike's, since there is no question of the source. View Quote your logic makes a lot of sense. If its not though, they can set us straight as well. Also since im no way a PSA agent, it wouldnt be like they are posting it, just that i am. I understand what your saying though, and agree. it could very well be that reason. the stealth lower, when compared more closely to my SC lower, is definately ran through a different machine program. Its good, but not as good as the FN SC lower, so i'd have to agree with the majority consensus it is not FN. I will amend the original post as such. |
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
I need to retract my previous post. Because I am no longer sure if I have high or low shelf lowers. The posted info confuses me. It says 1/4 inch from the safe selector to the shelf but the picture has the rear takedown circled. What I have is 1/2 inch from the bottom of the shelf under the takedown pin to the top of the lower receiver.
Sorry to muck up your thread. AL |
|
|
Originally Posted By Cavitation:
I need to retract my previous post. Because I am no longer sure if I have high or low shelf lowers. The posted info confuses me. It says 1/4 inch from the safe selector to the shelf but the picture has the rear takedown circled. What I have is 1/2 inch from the bottom of the shelf under the takedown pin to the top of the lower receiver. Sorry to muck up your thread. AL View Quote no problem Al, thanks for the clarification. Like i said in the first post, its a evolving thread, and here for us all to benifit from and help learn/teach us all from for the PSA lowers that have been offered and are offered currently. ;) |
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
bump for stickey
|
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
So PSA can we sticky?
|
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
So PSA can we sticky?
|
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
I own every one of these lowers with the exception of a SC lower. Make more PSA!
|
|
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
So? whose palm do i have to grease to get this stickied?
|
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
At this point you're becoming the guy who won't take a clue when the girl won't call him back. It was a good effort, but it might be time to let her go. Sorry man.
|
|
|
Thanks for putting this info together GamecockOperator, it's a great guide and answers a lot of questions I've had about PSA's products.
Could you expand on one point however. In your description of the PSA SC Lower made by FN, you state that; Originally Posted By GamecockOperator:
" . . . The low shelf design is pre-drilled for a rear lug set screw (1/4-28 tpi) which, when installed, allows adjustment for a no-rattle fit. . . . " View Quote Are you certain of that screw size? That's the same size as the pistol grip screw and seems way over sized for what's essentially just a stop screw. Do you have any pics of this screw set-up? I've considered adding one of these myself on a couple of my guns, but have never seen one actually installed. Thanks again . . . dp |
|
|
Originally Posted By Chizult:
At this point you're becoming the guy who won't take a clue when the girl won't call him back. It was a good effort, but it might be time to let her go. Sorry man. View Quote View All Quotes View All Quotes Originally Posted By Chizult:
At this point you're becoming the guy who won't take a clue when the girl won't call him back. It was a good effort, but it might be time to let her go. Sorry man. perhaps but if thats what it takes so be it. Originally Posted By dropdbombnow:
Thanks for putting this info together GamecockOperator, it's a great guide and answers a lot of questions I've had about PSA's products. Could you expand on one point however. In your description of the PSA SC Lower made by FN, you state that; Originally Posted By GamecockOperator:
" . . . The low shelf design is pre-drilled for a rear lug set screw (1/4-28 tpi) which, when installed, allows adjustment for a no-rattle fit. . . . " Are you certain of that screw size? That's the same size as the pistol grip screw and seems way over sized for what's essentially just a stop screw. Do you have any pics of this screw set-up? I've considered adding one of these myself on a couple of my guns, but have never seen one actually installed. Thanks again . . . dp Your welcome. I figure it is needed as it can get confusing, and well if it helps all of us it is a good thing, hell may even help PSA sell more stuff. no telling... that quote is actually directly from their description / site. I havent built one yet, so i have no photos of mine actually used. SC Lowers for sale on PSA site as for the looks of the set screw when installed (green dot looking screw ). : It looks similar to this : ![]() Umbrella i believe also offer these on their lowers. Another image of it is like this : |
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
Another bump for a stick. Nice write up, GCO.
![]() |
|
Results, not excuses.
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
Originally Posted By GamecockOperator:
Thanks Panzer! havent seen you round lately, hope all is good on your end :) View Quote View All Quotes View All Quotes Originally Posted By GamecockOperator:
Originally Posted By panzersergeant:
Another bump for a stick. Nice write up, GCO. ![]() Thanks Panzer! havent seen you round lately, hope all is good on your end :) Been busy working. I mostly go over to the Farrow Road store these days. I hate that you can't pluck small parts off the wall at the Fernandina store like you can at Farrow Road. It seems every time I go there for a part the gun counter has one guy on duty explaining the finer points of what an AR15 is to some tire-kicker. ![]() It's still worth the trip, though, just to visit with my pal Joe W. ![]() |
|
Results, not excuses.
|
Originally Posted By panzersergeant:
Been busy working. I mostly go over to the Farrow Road store these days. I hate that you can't pluck small parts off the wall at the Fernandina store like you can at Farrow Road. It seems every time I go there for a part the gun counter has one guy on duty explaining the finer points of what an AR15 is to some tire-kicker. ![]() It's still worth the trip, though, just to visit with my pal Joe W. ![]() View Quote View All Quotes View All Quotes Originally Posted By panzersergeant:
Originally Posted By GamecockOperator:
Originally Posted By panzersergeant:
Another bump for a stick. Nice write up, GCO. ![]() Thanks Panzer! havent seen you round lately, hope all is good on your end :) Been busy working. I mostly go over to the Farrow Road store these days. I hate that you can't pluck small parts off the wall at the Fernandina store like you can at Farrow Road. It seems every time I go there for a part the gun counter has one guy on duty explaining the finer points of what an AR15 is to some tire-kicker. ![]() It's still worth the trip, though, just to visit with my pal Joe W. ![]() i hear ya there man. I been busy as hell too. between classes and work, things are busy. I agree totally about Fernandina though. Wish the AR parts were where you could pick them up and put them in your buggy without having to deal with the counter guys. They dont need bothered by our asking for parts.. they need to sell those rifles to the tire kickers. lol. it seems since the remodel of Farrow though they have more room and more parts on the shelf there than fernandina for sure. I had hoped that Fernandina was gonna get a bit more organized with the pars and what not with the opening of the "hunting apparel" section, but that hasnt happend so far. In fact for being the "flagship store" im still a bit disappointed when comparing to how clean, well stocked, well lit, and layout of the Greenville Store. |
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
Good info Gamecock!
I'm pretty sure PSA did a couple group buys on AP lowers in the EE before they started selling them on their online website. |
|
|
Originally Posted By Glock031:
Good info Gamecock! I'm pretty sure PSA did a couple group buys on AP lowers in the EE before they started selling them on their online website. View Quote you may be right there. They also may have sold some at the gunshows they used to frequent before starting the retail stores/website... |
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
I would like to get the U lie lower, the original AP lowers to me seem like the best built ones, the others are good but I like the AP
![]() |
|
|
Originally Posted By my2Dogs:
I would like to get the U lie lower, the original AP lowers to me seem like the best built ones, the others are good but I like the AP ![]() View Quote IDK if you can even find someone who is willing to come off of one. I wish id of bought more than one back in the day. i felt the same way until i purchased a SC FN lower. that lower is sweet. |
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
Edited today to add .308 lower.
|
|
"Stand your ground. Don't Fire unless Fired upon. But if they mean to have a war, Let it begin here." - Capt. John Parker
|
bump for sticky!
|
|
Proud member of Team Ranstad.
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.