User Panel
User Panel
User Panel
|
Posted: 1/24/2012 4:33:36 PM EST
[Last Edit: Finslayer83]
Do I need to do anything different to run a mid length upper with an A2 (rifle buffer / buffer tube) lower?
Or slap on and go? I'm wanting to replace my carbine extension with a rifle one and run an A1 / C1 stock. Just needing to know if I need different buffer weight |
|
|
|
|
Posted: 1/24/2012 4:36:00 PM EST
[Last Edit: a308garand]
[#1]
Slap and go. 
It will run fine. |
|
|
|
|
Posted: 1/24/2012 4:36:30 PM EST
[Last Edit: a308garand]
[#2]
Slap and go. Slapped twice, darn it enter button! |
|
|
|
USA
|
Posted: 1/24/2012 4:51:45 PM EST
[#3]
Good to go with the military rifle set-up, whether A1 or A2 stock doesn't matter. I just returned from shooting my 16" CMMG middy 1:7 medium-contour with M16A1 stock, buffer and spring. This set-up is exceptionally sweet and has not had any kind of failure at all (only about 300 rounds so far) and as of today is shooting into a 2" ball at 50 yards with a 4x scope.
|
|
|
|
Posted: 1/24/2012 4:56:20 PM EST
[Last Edit: Finslayer83]
[#4]
Originally Posted By 1saxman:
Good to go with the military rifle set-up, whether A1 or A2 stock doesn't matter. I just returned from shooting my 16" CMMG middy 1:7 medium-contour with M16A1 stock, buffer and spring. This set-up is exceptionally sweet and has not had any kind of failure at all (only about 300 rounds so far) and as of today is shooting into a 2" ball at 50 yards with a 4x scope. http://i209.photobucket.com/albums/bb27/INLAND44/Guns/sightpic.jpg More pics! I just ordered an Aero lower as well. ETA: what rear sling attachment setup is that? |
|
|
|
USA
|
Posted: 1/24/2012 5:32:11 PM EST
[#5]
Aero lowers are fine. The sling attachment is the standard type for a 'patrol' sling on a full-stock rifle. It's included with the sling. When looking for a sling, you have to keep in mind what you have. I like the A1 stock because its a little shorter and fits me better, and it looks better with the 16" barrel. Sarco had a lot of these unissued stocks at one time for $65, with the military tube, buffer and spring. I have the stock cleaning kit in mine. Makes it heavier but also balances the heavier barrel some. I call this one my 'mini-rifle'.
|
|
|
ND, USA
|
Posted: 1/24/2012 8:38:44 PM EST
[#6]
no issues
|
|
|
|
Posted: 1/24/2012 10:02:49 PM EST
[#7]
My first AR was a RRA A2 middy. damn it ran smooth. i miss it. damn boating accidents....
 
|
|
|
|
|
Posted: 1/24/2012 10:29:10 PM EST
[#8]
Good to go. 
|
|
|
|
|
Posted: 1/24/2012 11:01:25 PM EST
[#9]
Originally Posted By bassist:
http://i33.photobucket.com/albums/d67/opensourcelinuxm/AR-Glock.jpg Good to go. Nice!! |
|
|
|
|
Posted: 1/25/2012 12:26:05 AM EST
[#10]
I ran this one for years and it ate all ammo...
|
|
|
|
WA, USA
|
Posted: 1/25/2012 12:52:11 AM EST
[#11]
Mine like 62 gr. Wolf
|
|
|
|
Posted: 1/25/2012 7:40:29 AM EST
[#12]
I like this thread.
|
|
|
|
|
Posted: 1/25/2012 8:17:23 AM EST
[#13]
I don't know which attachment he is running but Specter Gear makes a similar product. I have one and it's good stuff.
|
|
|
|
|
Posted: 1/25/2012 9:20:24 AM EST
[#14]
Let's see some more pics.
This is becoming my favorite AR setup. |
|
|
|
FIN
|
Posted: 1/25/2012 9:33:03 AM EST
[#15]
It is fine. I have used an AR midlength on an A1 buttstock for years.
My latest rifle is a midlength on a RR entry stock. Have not yet shot it though... 
With Glock 17 for scale. |
|
|
|
Posted: 1/26/2012 9:56:08 AM EST
[#16]
I edited the title to make this also a pic / any issues thread.
let's see some more pics |
|
|
|
|
Posted: 1/26/2012 10:30:10 AM EST
[#17]
Sorry I've got no pics because back in 2005 my Colt 6721 upper build which I replaced the factory heavy barrel with a Operator midlength barrel which I temporarily tried it on my Colt Match Target HBAR lower with fixed A2 stock.
My 6721 lower was not completed yet at that time so I slapped my just built midlength upper on my A2 rifle lower just to try out my midlength upper. It worked fine and I'm not surprised because I used to have a factory built Colt Sporter Lightweight carbine 6530 with a carbine gas system upper on a fixed A2 rifle stock back during the ban years and had no FTF problems at all using different kind of military surplus ammo. |
|
|
|
|
Posted: 1/26/2012 10:32:19 AM EST
[Last Edit: SickMAK90]
[#18]
By sickmak90 at 2011-09-20 I dubbed it mini-A2. I have since sold it to my father who installed MOE handguards and a MOE stock. I will admit, it looked nice in the A2 setup, but was very uncomfortable to me. I only had it because I had the lower back in the ban days and it was a cheap and easy stock to use. |
|
|
|
|
Posted: 1/26/2012 10:34:14 AM EST
[#19]
Here's a pic of a varmint build I did a while back. It is a 16" mid length gas with an A2, no issues what so ever. Specs are Aero lower PSA LPK DIY trigger using JP 4.5 FCG spring kit, bobbed and polished the hammer and trigger engagement areas. Yields about 5.8 to 6lbs on a RCBS trigger scale. A2 stock Used barrel marked DTI 1-9 ( assuming Del-Ton ) 16 mid Stag / CMT BCG ( AR15 carrier not FA ) No forward asst ( Schuster plug ) and no ejection port cover. Primary Arms scope mount Simmons White tail classic |
|
|
|
KS, USA
|
Posted: 1/26/2012 11:27:15 AM EST
[#20]
I agree with what was posted above - this is definitely one of the best looking setups in my opinion. The A1 stock just looks completely *right* with a middy 16. I may have to get one some day.
|
|
|
TX, USA
|
Posted: 1/26/2012 11:55:54 AM EST
[#21]
Really debating which direction I want to go for optics. I kind of want a 1-4, but I don't know how that would look with the FSB. There's always the ACOG, but that obviously costs a good bit... we'll see.
|
|
|
|
Posted: 1/26/2012 11:59:34 AM EST
[Last Edit: Landric]
[#22]
PSA mid-length Dissipator w/ A2 stock/rifle buffer. Runs great!
-PSA Complete Mid-Length Dissipator Upper -PSA Pictogram Lower -PSA LPK -Magpul Grip, Handguard, Magazine -A2 stock for the EE -Nikon M-223 1-4x w/ Bobro Mount -MI Low Profile Rear BUIS -Blackhawk Sling 
|
|
|
|
|
Posted: 1/26/2012 12:30:33 PM EST
[#23]
Originally Posted By jmccoy:
Really debating which direction I want to go for optics. I kind of want a 1-4, but I don't know how that would look with the FSB. There's always the ACOG, but that obviously costs a good bit... we'll see. I was looking at the Primary Arms compact 3x. might be a solid option |
|
|
|
TX, USA
|
Posted: 1/26/2012 1:07:28 PM EST
[#24]
|
|
|
USA
|
Posted: 1/26/2012 1:40:22 PM EST
[#25]
Man, that looks CLASSIC! |
|
|
|
Posted: 1/26/2012 2:34:26 PM EST
[#26]
Originally Posted By 1saxman:
Man, that looks CLASSIC! slick side A1 upper middy, pure beauty |
|
|
|
|
Posted: 1/26/2012 4:03:04 PM EST
[#27]
Originally Posted By jmccoy:
Really debating which direction I want to go for optics. I kind of want a 1-4, but I don't know how that would look with the FSB. There's always the ACOG, but that obviously costs a good bit... we'll see. At 4x you can't see it, a 3x there is a slight shadow, below 3x it is visible, but not distracting once you get used to it. At 1x it is almost like looking through an Aimpoint (at least with the M-223 on my rifle), though obviously you cannot co-witness. I am thinking about getting one of the new Nikon P-223 3x scopes for my Dissipator and moving the 1-4x to something else. |
|
|
|
|
Posted: 1/27/2012 11:13:51 AM EST
[#28]
to the top for those who don't click to page 3
|
|
|
|
MN, USA
|
Posted: 1/27/2012 11:47:04 AM EST
[#29]
Cell pic is all I have handy.
|
|
|
WA, USA
|
Posted: 1/27/2012 2:21:53 PM EST
[#30]
First attempt at posting a photo - hope it works! PSA stripped lower PSA MOE LPK Geissele S2S Cav Arms C1 stock (A1 lenghth) Lilja Nordic 16" SS mid-lenghth 1/8 Wylde Troy 10" MRF Troy BUIS DD BCG DD clamp on low profile gas block Still breaking her in, but so far runs great! |
|
|
|
Posted: 1/27/2012 2:24:50 PM EST
[#31]
Originally Posted By Qxdash8:
http://i1063.photobucket.com/albums/t509/Qxdash8/5072753f.jpg First attempt at posting a photo - hope it works! PSA stripped lower PSA MOE LPK Geissele S2S Cav Arms C1 stock (A1 lenghth) Lilja Nordic 16" SS mid-lenghth 1/8 Wylde Troy 10" MRF Troy BUIS DD BCG DD clamp on low profile gas block Still breaking her in, but so far runs great! sweet rifle! |
|
|
|
|
Posted: 1/27/2012 2:35:54 PM EST
[#32]
A few of my collection. The AR is a midlength CMMG upper on a Cavarms lower. |
|
|
|
TX, USA
|
Posted: 1/27/2012 2:59:50 PM EST
[Last Edit: cbr]
[#33]
|
|
|
|
Posted: 1/28/2012 9:40:12 AM EST
[Last Edit: airgunner]
[#34]
I thought we just did this recently? Oh well...
Here's the first one I did, mostly all RRA with an A2 upper and CA C1 stock.... 
Here's my sons, SDI upper, RRA lower with Colt CS stock, Acog and Troy BUIS... 
|
|
|
|
TX, USA
|
Posted: 1/28/2012 5:19:05 PM EST
[#35]
Ran mine today for the first time with the new stock and it was smoooooth. I like this combo a lot.
|
|
|
|
Posted: 1/28/2012 7:14:02 PM EST
[#36]
Originally Posted By jmccoy:
Ran mine today for the first time with the new stock and it was smoooooth. I like this combo a lot. nice! |
|
|
|
|
Posted: 1/28/2012 7:25:03 PM EST
[#37]
|
|
|
|
|
Posted: 1/28/2012 8:07:50 PM EST
[#38]
 Not only have I not had problems, I believe this is the sweet spot for running a suppressor on a 16" gun. I have tried a few variations and this set up requires absolutely no further modification to keep the gas from blasting into my snoot via the charging handle slot. |
|
|
|
OK, USA
|
Posted: 1/29/2012 5:15:40 AM EST
[Last Edit: hotdog250j]
[#39]
|
|
|
|
Posted: 1/29/2012 11:33:35 AM EST
[#40]
Originally Posted By hotdog250j:
http://i367.photobucket.com/albums/oo119/hotdogit250/A1handguardsMidLengthFinal0022.jpg +1 very cool build |
|
|
|
CA, USA
|
Posted: 1/29/2012 9:56:29 PM EST
[Last Edit: fatkid35]
[#41]
awesome combo. glad i built one.go for it.just modded my extra a2 stock to a1 length. like it better.
|
|
|
|
Posted: 2/4/2012 11:03:30 AM EST
[#42]
Saturday morning bump to the top.
Best looking AR setup IMO. |
|
|
|
TN, USA
|
Posted: 2/4/2012 1:38:36 PM EST
[#43]
Originally Posted By fatkid35:
awesome combo. glad i built one.go for it.just modded my extra a2 stock to a1 length. like it better. http://i981.photobucket.com/albums/ae296/fatkid35/mid004.jpg How did you mod your extra A2 stock to A1 length? Any diffuculty? Any downside? |
|
|
|
Posted: 2/4/2012 8:32:58 PM EST
[#44]
Originally Posted By CATARGADELENDAEST:
Originally Posted By fatkid35:
awesome combo. glad i built one.go for it.just modded my extra a2 stock to a1 length. like it better. http://i981.photobucket.com/albums/ae296/fatkid35/mid004.jpg How did you mod your extra A2 stock to A1 length? Any diffuculty? Any downside? +1 for info |
|
|
|
OK, USA
|
Posted: 2/4/2012 9:44:05 PM EST
[#45]
billet 458 socom
|
|
|
|
Posted: 2/6/2012 5:54:11 PM EST
[#46]
When the next commission check rolls in this month, I've planned my build.
Here are the concepts Build stage 1: - SAA lower - PSA LW mid length upper - TG Battle grip - DD 1.5 - MOE mid length HG - A1 or CavArms stock 
|
|
|
|
KS, USA
|
Posted: 2/6/2012 7:05:21 PM EST
[#47]
Originally Posted By Finslayer83:
When the next commission check rolls in this month, I've planned my build. Here are the concepts Build stage 1: - SAA lower - PSA LW mid length upper - TG Battle grip - DD 1.5 - MOE mid length HG - A1 or CavArms stock <a href="http://imageshack.us/photo/my-images/38/buildbase1.jpg/" target="_blank">http://img38.imageshack.us/img38/7966/buildbase1.jpg</a> Jealous.
Post pics when it's done! |
|
|
|
Posted: 2/6/2012 7:11:00 PM EST
[Last Edit: Winn]
[#48]
Originally Posted By attworth:
Originally Posted By Finslayer83:
When the next commission check rolls in this month, I've planned my build. Here are the concepts Build stage 1: - SAA lower - PSA LW mid length upper - TG Battle grip - DD 1.5 - MOE mid length HG - A1 or CavArms stock <a href="http://imageshack.us/photo/my-images/38/buildbase1.jpg/" target="_blank">http://img38.imageshack.us/img38/7966/buildbase1.jpg</a> Jealous.
Post pics when it's done! Definitely ... |
|
|
|
MA, USA
|
Posted: 2/6/2012 7:17:30 PM EST
[#49]
Couple pics of my 16" midlength with fixed Ace stock...
|
|
|
|
Posted: 2/7/2012 7:50:30 AM EST
[#50]
Originally Posted By Winn:
Originally Posted By attworth:
Originally Posted By Finslayer83:
When the next commission check rolls in this month, I've planned my build. Here are the concepts Build stage 1: - SAA lower - PSA LW mid length upper - TG Battle grip - DD 1.5 - MOE mid length HG - A1 or CavArms stock <a href="http://imageshack.us/photo/my-images/38/buildbase1.jpg/" target="_blank">http://img38.imageshack.us/img38/7966/buildbase1.jpg</a> Jealous.
Post pics when it's done! Definitely ... DD 1.5 and cavarms (Fulton armory upgrade) ordered... It has begun |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
