User Panel
Lead, follow, or get the flock out of the way
SC, USA
|
|
NorCal_LEO call sign: Armour
|
|
The 601 and 607 (GX-5857) lowers will go live today.
Also going to have some more 653 upper halves up too. A1 port doors will be in October sometime. |
|
We are living in a Tom Clancy novel
Over 50 and reputed to be a formidable brigand https://hr1871.com/ |
Grabbed a 601 lower, thanks.
|
|
|
Double post
|
|
|
@mike_nds I just bought a H&R XM177 second hand from some that says it's unfired. It has a one piece gas ring on the bolt. I thought it was odd because the bolt is so loose in the carrier (you can't pull the bolt and set the bolt/carrier on the bolt face without it collapsing). Is this how they are being shipped or have I been taken?
also where are the barrels marked? |
|
|
patiently waiting 635 SBR's or 635 short barreled uppers
|
|
Looking for all versions of gasbuster charging handles.
|
Originally Posted By mike_nds: No such thing as unfired, we shoot/zero all rifles and uppers we make. The barrels are marked at either 12 or 6 o'clock under the handguard. That bolt is probably not ours or the guy put in a Mcfarland. Toolcraft makes ours and they are really stiff. https://palmettostatearmory.com/media/catalog/product/cache/0423dea8e9791990cba1722182d60508/h/r/hr40280_-_r.png https://palmettostatearmory.com/media/catalog/product/cache/0423dea8e9791990cba1722182d60508/h/r/hr40280_-_roll_mark.png View Quote |
|
|
I believe if I am not mistaken that H&R does not stake the locknut,mine is not staked Attached File
Attached File Attached File Attached File Attached File Attached File Attached File |
|
Diplomacy is the art of saying "nice doggy" until you can find a rock. And most of all FJB
|
The XMs say XM177E2 on the receiver, not Commando. Has PSA even shipped complete Commando-marked rifles in that configuration? I see stripped and complete lowers listed on the site, but no complete rifles.
|
|
|
|
The voices in my head say I’m just being paranoid
KY, USA
|
Originally Posted By EagleArmsHBAR: Well, here's a complete pic. I hate being lied to. Ugh. Just occurred to me, do all H&R factory rifles have the flashing on the uppers? https://www.ar15.com/media/mediaFiles/298/IMG_0052-2971862.jpg View Quote Yes, all of them have flashing. That’s a partial fence lower too, so it isn’t even correct. That wasn’t bought as a complete rifle. |
If you aren't representing Jesus in a way that makes people want to hang out with you, you're doing it wrong.
|
H&R upper would have a shaved bayonet lug, too.
|
|
|
Originally Posted By EagleArmsHBAR: Well, here's a complete pic. I hate being lied to. Ugh. Just occurred to me, do all H&R factory rifles have the flashing on the uppers? https://www.ar15.com/media/mediaFiles/298/IMG_0052-2971862.jpg View Quote You got scammed. That's a mix master someone put together. The bolt, lower, upper/lower color, intact bayo lug, spot weld location are all wrong. Why purchase a used one when the new ones are still available? https://palmettostatearmory.com/harrington-richardson-xm177e2-rifle-with-1-12-twist-gray.html |
|
|
As the others have said, not one of our factory assembled carbines.
Not even a good attempt. |
|
We are living in a Tom Clancy novel
Over 50 and reputed to be a formidable brigand https://hr1871.com/ |
|
Mike (or anyone), are those marked "G 5.56 NATO 1/7"?
|
|
|
Attached File
. H&R XM177E2 barrel |
|
Diplomacy is the art of saying "nice doggy" until you can find a rock. And most of all FJB
|
Originally Posted By Rlett4: https://www.ar15.com/media/mediaFiles/160387/AC1A1874-EECA-4131-90A0-6043EDEC5A91_jpe-2972534.JPG. H&R XM177E2 barrel View Quote I'm stuck with this, but at least I don't have to worry about dismounting the barrel and checking the torque specs and regreasing it with proper aeroshell grease. Sorry for the thread hijack, Mike. Thanks for producing the best ARs in the world. I'll buy direct in the future. |
|
|
So matching compete 607 uppers with the actual 607 handguards made from cut down handguards, wkrh A1, three prong, or faux moderator? Please?
|
|
I killed a bacon puppy. :(
This post is brought to you by The Pogues, the official punk band of the .mil forums. |
So we are already at faux clone H&R in the market?
|
|
Death to quislings.
|
Originally Posted By backbencher: So we are already at faux clone H&R in the market? View Quote He still maintains it came from PSA as a complete rifle. He said the lower originally shipped with a plastic stock and that he replaced it with a coated aluminum stock, which I have no issue with. I'm going to keep the rifle and enjoy it. Im done worrying about it because it isn't worth the stress. |
|
|
Originally Posted By EagleArmsHBAR: No, I think that he bought a complete commando lower and a complete 12.7" A1 upper. Then my guess is that the upper was sent off to have the pin and weld done. When he received the upper back, my guess is he installed the incorrect bolt (whether on accident or on purpose) into the upper. Then for some reason he tried to pass it off as a factory build. That's all speculation on my part, but that chain of events make sense to me. He still maintains it came from PSA as a complete rifle. He said the lower originally shipped with a plastic stock and that he replaced it with a coated aluminum stock, which I have no issue with. I'm going to keep the rifle and enjoy it. Im done worrying about it because it isn't worth the stress. View Quote Looks like a commando upper, round FA and later door, that he had a P&W done to make it legal. He got the commando lower too. I would be a little pissed about the bolt but other then that 1000 bucks is not bad. The lower is about $420 if bought whole and the upper about 600. But he did not buy it this way so he lied. Maybe he wanted to get some money back to put toward getting the more correct setup???? EDIT: thought you said you paid a K for it. Looked again did not see where you said that. |
|
|
Anyone know if the BRN-601 complete upper fit will fit on an HR a1 lower?
|
|
|
No reason it shouldn’t they originally used Nodak Spud Attached File
]lowers when they offered the complete rifle’s |
|
Diplomacy is the art of saying "nice doggy" until you can find a rock. And most of all FJB
|
Any ETA on 1/7 20" A1 barrel assemblies?
|
|
|
Originally Posted By EagleArmsHBAR: OK at least it's a real H&R barrel and upper receiver. Thank you. I'm stuck with this, but at least I don't have to worry about dismounting the barrel and checking the torque specs and regreasing it with proper aeroshell grease. Sorry for the thread hijack, Mike. Thanks for producing the best ARs in the world. I'll buy direct in the future. View Quote You don't need aeroshell grease. A good, non lithuim, wheel bearing grease or antisieze will suffice. A little goes a long way. |
|
|
Anyone remember how much the complete A-1 uppers were? Both blk & gray, 20”, 1:12..Thanks.
|
|
|
|
I have a grey lower, the question is do I wait for a grey upper.
|
|
|
Easy solution - get a black upper and then you are forced to get a black lower!
It's a vicious cycle... |
|
|
|
|
Originally Posted By mtomso7464: You don't need aeroshell grease. A good, non lithuim, wheel bearing grease or antisieze will suffice. A little goes a long way. View Quote View All Quotes View All Quotes Originally Posted By mtomso7464: Originally Posted By EagleArmsHBAR: OK at least it's a real H&R barrel and upper receiver. Thank you. I'm stuck with this, but at least I don't have to worry about dismounting the barrel and checking the torque specs and regreasing it with proper aeroshell grease. Sorry for the thread hijack, Mike. Thanks for producing the best ARs in the world. I'll buy direct in the future. You don't need aeroshell grease. A good, non lithuim, wheel bearing grease or antisieze will suffice. A little goes a long way. You can get Aeroshell 33MS on ebay for 10 bucks. Not sure why anyone wouldn't just use the correct grease. |
|
That which does not kill us makes us stronger. - Friedrich Nietzsche
I've stayed relatively employed most of my adult life. That should count as miracle #1 - Wandering_Moses |
Originally Posted By mtomso7464: You don't need aeroshell grease. A good, non lithuim, wheel bearing grease or antisieze will suffice. A little goes a long way. View Quote All the grease is for is to get proper torque specs and prevent galling. I just don't like white lithium grease, or graphite for that matter. A good moly grease, or Lucas wheel bearing grease. wipe some on, torque it down and your are done. No magic in the aeroshell. |
|
|
|
Originally Posted By jimmyspinn: Grey A1 stripped uppers up right now. Secret squirrel link - only worked on mobile, added to cart, then visible on PC. View Quote |
|
|
DAMN!!!!
Ive been waiting for a fucking year... |
|
|
Originally Posted By grondike: I got this in email about 5 minutes ago. https://www.ar15.com/media/mediaFiles/622/uppers-2981164.png View Quote And they are gone ! |
|
Diplomacy is the art of saying "nice doggy" until you can find a rock. And most of all FJB
|
Grey slick side striped uppers are available though.
|
|
|
|
Regular grey stripped A1 uppers lasted a whopping 35 minutes this time. Kinda surprised we didn't crash the PSA website...
Because I caught feelings for all you hooligans, I'll keep my bot running for the grey A1 stripped uppers and grey slickside uppers and post when it the bot pops. I'm on to saving up for and hunting for barrels now. |
|
|
Can you put a triangle hand guard on the “RETRO 723 16" AR-15 UPPER 5.56 1:7 CARBINE LENGTH”
Im a noob, this may be a stupid question. |
|
|
Originally Posted By MrFatHead: Can you put a triangle hand guard on the “RETRO 723 16" AR-15 UPPER 5.56 1:7 CARBINE LENGTH” Im a noob, this may be a stupid question. View Quote Only Model 1 shorty carbine handguards. And you'd probably need to replace the handguard ring behind the front sight. |
|
Death to quislings.
|
Grey A1 stripped uppers are live right now.
Blems here Regular, non blem here Edit - looks like 6 non-blem and 10+ blems available at 4:09 EST |
|
|
fuckin a I got two
|
|
|
Originally Posted By jimmyspinn: Grey A1 stripped uppers are live right now. Blems here Regular, non blem here Edit - looks like 6 non-blem and 10+ blems available at 4:09 EST View Quote So unfortunate they have always dropped when I'm driving to work. One day I'll get one! Traffic laws be damned |
|
|
Any time line on C7 uppers?
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.