Aww crap now that's one good looking set up

Way to make us jealous!

I like the look of the ris with nothing on it. I took everything off mine.

Same. Plus, I've noticed in most of the actual .mil pics, they have no rail covers or ladders.

Just waiting on the front site on this one. They sent a black one instead of the taupe.

Thanks for all the inspiration from this thread... now my kids can't go to college.

Oh damn you all. Guess I know where my tax return is going. Now to find someone who is mil to order it for me.

Sexy!  Kind of surprised you don't have a Class I laser on there, Neil.  

Thinking about getting one myself soon - I've spent a significant amount of time running NV, but don't have any of my own.  Even with TNVC's great deals on PVS-14s (I only need the monocular, I have all the mounting and accessory gear that I've accumulated over the years) and the LDI Class I lasers we're looking at about $4,000!  

Digital camera is found and on the charging cradle.  Pics are coming.  

Finally.

~Augee

This is how my block II will be for a long time to come.

It's as close as possible now. Even got my cqd rear sling plate!

Nice try but pmags are not issued in the kit

My carpet isn't issued in the kit either

Nice pair of rifles! Might go for a Mk12 upper as well...

(Clicky d'smiley...)





 

 

Okay -

First try since I found my digital camera - but let's give it a go:

M4A1 SOPMOD

Upper Receivers:



From the top:

1) M4A1 Block 2 URG - SU-230/PVS-C (Gen II) - Colt RO921HB upper and BCG, DD RIS II, Troy gasblock, Crane charging handle latch, M4QD comp, MI QD sling swivel
2) M4A1 Block 1 Phased Replacement URG - SU-230/PVS-C (Gen III) with MRD (Doctor) - Colt RO921HB upper and BCG, PRI Gasbuster, M4QD comp, DD QD sling swivel
3) M4A1 Block 1 Phased Replacement URG - SU-231/PEQ - Colt RO920 upper and BCG (half-moon carrier for R6601 lower), Crane charging handle latch, M4QD comp, Colt side sling swivel
4) M4A1 CQB Block 2 URG - SU-231/PEQ - Colt upper, DD 10.3" barrel, Colt BCG, DD RIS II, KAC MK 12 gasblock, PRI Gasbuster, M4QD comp, DD QD sling swivel
5) M4A1 CQB Block 1 URG - 4X DOS (TA01NSN) with MRD (JPoint) - DD 10.3" URG, BCM BCG, Crane charging handle latch, M4QD comp

The 14.5"s:



The 10.3"s:



Lower Receivers:



Most of these are still "works in progress," as they don't all have ambi-controls yet.  Also, at least two of them will hopefully (in the far far future ) be replaced with "M4 CARBINE" marked SP6920 lowers, plus I need a fifth... at least so all my uppers can have "permanent" lowers.  

1) "Go-to" lower - LE6920 lower with Crane stock, Garmin Foretrex 101 wrist compass with LBT pouch, Geissele SSA FCG, Norgon ambi-catch, BAD-ASS with standard / short-thin lever, CQD sling plate staked on
2) Preban Sporter Match Targer HBAR (R6601) lower with Colt 4pos. receiver extension and LMT SOPMOD stock - unfortunately this one still has the sear block in it requiring the use of a cut carrier - I will probably be sending it to SAW or ADCO soon to have the sear-block removed.  
3) Colt MT6400C lower with Colt M4 stock assembly, Norgon ambi-catch, BAD-ASS with standard / short-thin lever, CQD sling plate staked
4) Colt MT6400C lower with Colt 4 pos. receiver extension and LMT SOPMOD stock, CQD sling plate staked

More images of lower 1:









The H2 buffer:




The newest addition:

M4A1 SOPMOD Block 2:






And the Block 1 Phased Replacement version:






Both together:






Here's the Block 1 Phased Replacement "CQB" upper - in suppressed and unsuppressed configuration:






For those that are curious, both "56" and "21" were parts of my callsigns in a past life - many of the parts are left over from them, and marked appropriately, while I've gotten in the habit of using "56" as my primary "marking" these days simply out of convenience.  

Also, with regards to the VFG - I'm more and more finding it most comfortable to shoot without any VFG at all - this is a trend that's been going on for a long time, however, every upper has a TD VFG "available" for use - the reason for this is I've found it to be extremely useful during mounted operations - not for any real shooting purpose - but when you're sitting in a vehicle, the VFG works as a perfect "stop" for resting the rifle on your leg with the VFG across your thigh.  It keeps the muzzle off the floor, but the weapon isn't flagging anyone, and it's actually really comfortable.  

Here's the Block 1 and Block 2 "deployment kit" setups with a 9MM pistol and caliber .45 pistol:

Block 1:




Block 2:




A couple more pics of the Block 2 M4A1, you know, it being the thread title and all.  

The LA-5/PEQ (AN/PEQ-15) is an airsoft battery case I found at a gun show for $12.  It's nothing but an empty shell of an LA-5, but hey, it looks nice for the occasional picture.  Needless to say, I don't use it when shooting, but for $12 a piece, I might pick up a couple more for photo ops if I can find 'em again, just to make my clones "look" more accurate.    An interesting fact - the tapeswitch plug is the correct size, and the Insight tapeswitch can be plugged into it - it plugs into thin air... but that's besides the point!  








All of them together:


_____________________________________________________________________________________________


For Mattyvac:

The YHM Triple Rail Mount:



You can see the barrel insert that allows it to clamp down on the barrel.


Here it is installed without anything on it:




Mocked up like one of the photos posted:






That's what I've got for now!  Need a MK 12 MOD 0 clone to round it out, not to mention NOD and a Class 1 laser - but I'm pretty satisfied so far!  

~Augee

fake PEQ?

Yup, I posted it in there, but I know it was probably a pretty prodigious post:



~Augee

Looks good Neil. You by any chance going to be at CFDCC next week with that? I really want to check out that scope out.

whoops, didnt see that.


too busy fapping.

Augee



YOU WIN!







I so lack at this clone thing

 

I WANT MY GOD DAMN STAMPS TO COME BACK FUCK. SIX MONTH WAIT!,!,!,!,!,,!,!,,!

so a surefire 215 perm'd on a 14.5" would be legal length correct?

(Points finger at screen and chuckle's)









Then reality hits me that I have to go to the dentist and use my elcan fund money tomorrow  



( Its like someone doesnt want me to get one )

Yes

RIS FSP purchased :) Looks like I'm gonna end up it afterall. I might just have the irons on it for a while though

College is overrated...the Army is free and doesnt stick you with student loans for the rest of your life.

I can get one for like $2300. I'm still on the fence about it. I haven't gotten to play with one in person yet.

its really depressing how fast anything block II related gets sold on the EE.


im never going to get mine built

Thats nothing but pure fuckin awesomeness... You sir win the internet.

I know there was some discussion a few pages back about using Rockset to attach the NT4 muzzle device.  Spin-off question: would it be OK to use a couple or 3 crush washers to extend the NT4 flash hider out far enough to make the >16" length and then perm. attach it?  Or is there an adapter/spacer one can buy that will do this––if so, where can I find it?

marvin pitt's  [email protected] is a person some of the member's have used for the NT4's and the you can also go thru adco firearms

Augee, I'm jealous. Also, for the pinned NT4, mine was supposedly done by ADCO before I bought it. I have checked, and it is 16" barrel length.

I was just about to post these.  Oh well here's two more.



MDH-6730 by Highway0311, on Flickr


MDH-6730-2 by Highway0311, on Flickr

Augee has the nicest paint.  I freekin' love it...

My form 3 might not complete in time, so thats ok

I know this has been talked about but i just want a little clarification, the barrel nut for the RIS will not fit over a cut down and shaved FSB. So therefore buying a complete 14.5 upper and chopping the FSB is pretty much a waste?

would it be more cost effective to buy a upper with FSB, remove the FSB, install barrel nut, chop/shave FSB, reinstall, then install the RIS handguards?

Yes.

There is only one word that comes to mind to describe how awesome that post is. Tits.

You have a really nice collection dude.

Wow....I am humbled

Yes.  It doesn't take long to do at all.

I agree with you.

Wow Augee - those rifles are functional works of art!

So, now that I'm building an FSP M4A1, I'm thinking of doing an Early conversion. What type of aimpoint or eotech would have been used early on? 552? I'm not familiar with Aimpoint models enough to know. I don't want anything magnified on it. I've got a PSA M4A1 HF upper ordered for it.