User Panel
Originally Posted By walkinginadangerzone:
Anyone know what the blast baffle of the RC is made of? Nice, and yep. View Quote "The SOCOM556-RC is constructed from advanced US mill-certified high-temperature alloys and heat-treated stainless steel, and features a tough, corrosion-resistant Ionbond coating on the Fast-Attach® lock ring and Cerakote™ ceramic finish on the suppressor body, in either Black or Dark Earth color." |
|
We are not citizens, We are suspects.
|
|
Originally Posted By UndrGrndPrdcts:
Anyone? Also where are most of you getting colt lowers? From another rifle? View Quote View All Quotes View All Quotes |
|
|
|
|
|
|
Originally Posted By wissota4:
Got some fresh snow the past couple of days https://www.AR15.Com/media/mediaFiles/384425/CQBR_BLKII-2_1_jpg-838258.JPG View Quote |
|
Practice, the master of all things. - Augustus
|
Originally Posted By krdt: Damn, that lower you did turned out pretty fuckin' snazzy. Who did the ano? View Quote The anodizing was done by customardustcovers.com Has a greyish tint to it. Currenrly working on a lower for the block 1. Turning out better so far. |
|
|
|
Originally Posted By wissota4:
Thanks man. I'll admit, it didn't turn out as I wanted it to. The anodizing was done by customardustcovers.com Has a greyish tint to it. Currenrly working on a lower for the block 1. Turning out better so far. View Quote View All Quotes View All Quotes Originally Posted By wissota4:
Originally Posted By krdt: Damn, that lower you did turned out pretty fuckin' snazzy. Who did the ano? The anodizing was done by customardustcovers.com Has a greyish tint to it. Currenrly working on a lower for the block 1. Turning out better so far. I'd take the slightly too gray color over some of the black anodizing I've seen on some 80% lowers that is a bit too shiny or otherwise looks "off." |
|
Practice, the master of all things. - Augustus
|
Originally Posted By wissota4:
Got some fresh snow the past couple of days https://www.AR15.Com/media/mediaFiles/384425/CQBR_BLKII-2_1_jpg-838258.JPG View Quote |
|
|
Originally Posted By C6H12O6: https://www.AR15.Com/media/mediaFiles/123535/76DB4B6D-B74F-4D22-8410-F1F3AE258FD6_jpeg-838518.JPG View Quote |
|
|
Does Surefire do the re-coring of only the SOCOM RC.....or the RC2 also (?)...….and what about the SB (?).
On the first baffle wear......anyone have any photos of wear using the SOCOM SB (with slightly larger bore)…..and possible a comparison of 4-prong vs. SFMB when using the SOCOM SB (?). TIA, RichardS US Army, RET |
|
|
Originally Posted By C6H12O6:
https://www.AR15.Com/media/mediaFiles/123535/76DB4B6D-B74F-4D22-8410-F1F3AE258FD6_jpeg-838518.JPG View Quote View All Quotes View All Quotes Originally Posted By C6H12O6:
Originally Posted By wissota4:
Got some fresh snow the past couple of days https://www.AR15.Com/media/mediaFiles/384425/CQBR_BLKII-2_1_jpg-838258.JPG Either way, that's not a big bite hotdog ;p. |
|
Practice, the master of all things. - Augustus
|
|
|
|
Originally Posted By wissota4:
https://www.AR15.Com/media/mediaFiles/384425/20190208_193733_jpg-838717.JPG Mine, my m4, a hot dog. View Quote Nevermind I looked at mine and they’re the same. |
|
|
- Selling left nut for a Wilcox NF T1/MRDS mount.
|
@conner378
Why do you like to shoot your urgi 10.3 more than the block ii? |
|
|
|
Originally Posted By Moosh151:
The 10.3 I run now and the 10.4 it replaced. http://i.imgur.com/XFLbdIs.jpg http://i.imgur.com/qsUTub5.jpg View Quote |
|
|
Originally Posted By Moosh151:
The 10.3 I run now and the 10.4 it replaced. http://i.imgur.com/XFLbdIs.jpg http://i.imgur.com/qsUTub5.jpg View Quote |
|
Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it." |
When you find out the system is inheritley flawed and smashes itself apart you would. The cam pin in my bcg cut through the type 3 hardcoat anodizing in under 10k rounds. Crane has changed the service regiment on them to reflect this happening and last time I talked to the dudes fixing the guys behind the fence's guns they were replacing uppers every 15k rounds or so.
|
|
|
Unfortunately, I didn't have any pictures suitable for use prior to 700rds, including my photo of the baffle when new; but here is a full animation of erosion from 700 to current. Had I known I'd eventually want to animate it, I would've taken pictures in a more consistent manner (same height, same baffle orientation, same angle, etc.). It would've made it a lot easier to see the gradual changes if the transitions were smoother (especially on some of the earlier photos).
Oh well, kinda interesting none the less. I think I'll probably continue adding to it; be kinda nifty to have a full timeline of erosion up to re-core. Click To View Spoiler |
|
Practice, the master of all things. - Augustus
|
Originally Posted By Moosh151:
When you find out the system is inheritley flawed and smashes itself apart you would. The cam pin in my bcg cut through the type 3 hardcoat anodizing in under 10k rounds. Crane has changed the service regiment on them to reflect this happening and last time I talked to the dudes fixing the guys behind the fence's guns they were replacing uppers every 15k rounds or so. View Quote |
|
"I do what I want" - Abu Hajar
|
Originally Posted By Moosh151:
When you find out the system is inheritley flawed and smashes itself apart you would. The cam pin in my bcg cut through the type 3 hardcoat anodizing in under 10k rounds. Crane has changed the service regiment on them to reflect this happening and last time I talked to the dudes fixing the guys behind the fence's guns they were replacing uppers every 15k rounds or so. View Quote |
|
Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it." |
Originally Posted By Moosh151:
When you find out the system is inheritley flawed and smashes itself apart you would. The cam pin in my bcg cut through the type 3 hardcoat anodizing in under 10k rounds. Crane has changed the service regiment on them to reflect this happening and last time I talked to the dudes fixing the guys behind the fence's guns they were replacing uppers every 15k rounds or so. View Quote But I get the feeling you mean through the aluminum as well |
|
I apologize in advance.
ZX636R Master Race |
Originally Posted By Moosh151:
The 10.3 I run now and the 10.4 it replaced. http://i.imgur.com/XFLbdIs.jpg http://i.imgur.com/qsUTub5.jpg View Quote |
|
WTB:
- EOTech FDE XPS 3-0 - Insight LA-5 - Surefire FH762SV-SCAR Muzzle Device |
Originally Posted By MILSPEC556:
Do you mean it was eating through the receiver itself? Eating through the hard coat ano is a non issue. Even ARs do that. But I get the feeling you mean through the aluminum as well View Quote |
|
|
Originally Posted By Moosh151:
Yup. Mine was literally cutting a nice straight groove into my upper. As I said, USASOC is deadlining 10.4 416s every 15k rounds or so last I heard. Now of course with full auto fire, a suppressor, and a short barrel this problem is made worse, but still. View Quote |
|
"C'mon y'all, it's Indian Food Night at the DFAC"
|
Originally Posted By Moosh151:
When you find out the system is inheritley flawed and smashes itself apart you would. The cam pin in my bcg cut through the type 3 hardcoat anodizing in under 10k rounds. Crane has changed the service regiment on them to reflect this happening and last time I talked to the dudes fixing the guys behind the fence's guns they were replacing uppers every 15k rounds or so. View Quote |
|
|
|
Originally Posted By ECPrevatte:
https://farm2.staticflickr.com/1778/42104601395_61b9aee360_c.jpg 212 212 SOCOM Upgrade for lack of better term RC Not RC2 because no one cares. View Quote |
|
|
|
Working on a 416 build. Of the issue suppressors, 212 or RC the better to use? Or perhaps the SB, seems like minimal back pressure is key. Or any other can that has less back pressure than the surefires?
|
|
|
Originally Posted By ViperEH:
Working on a 416 build. Of the issue suppressors, 212 or RC the better to use? Or perhaps the SB, seems like minimal back pressure is key. Or any other can that has less back pressure than the surefires? View Quote |
|
|
|
Kinda curious, since you have both an RC and NT4, how does the NT4 compare to the RC when it comes to back pressure? People always seem to discuss the slight difference in weight or the different tone of an NT4, but I don't recall anyone ever mentioning how they compare with back pressure.
|
|
Practice, the master of all things. - Augustus
|
I think I covered it in the video between the two on YouTube.
However, the SF is noticeably better. |
|
|
Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it." |
Originally Posted By Moosh151:
The 10.3 I run now and the 10.4 it replaced. http://i.imgur.com/XFLbdIs.jpg http://i.imgur.com/qsUTub5.jpg View Quote |
|
"C'mon y'all, it's Indian Food Night at the DFAC"
|
Originally Posted By ECPrevatte:
I think I covered it in the video between the two on YouTube. However, the SF is noticeably better. View Quote Oh, well... probably going to get one regardless. But, that doesn't mean I don't occasionally question whether I should just get another SF and save $650 or so, heh. |
|
Practice, the master of all things. - Augustus
|
Originally Posted By daojag: How do you like the MAWL compared to ATPIAL? View Quote |
|
|
Originally Posted By daojag:
How do you like the MAWL compared to ATPIAL? View Quote View All Quotes View All Quotes Originally Posted By daojag:
Originally Posted By Moosh151:
The 10.3 I run now and the 10.4 it replaced. http://i.imgur.com/XFLbdIs.jpg http://i.imgur.com/qsUTub5.jpg |
|
I apologize in advance.
ZX636R Master Race |
|
I apologize in advance.
ZX636R Master Race |
|
Originally Posted By brodband8:
Keep dreaming the atpial-c will be better than a mawl c1+ lol. You know you just need a fp peq. View Quote View All Quotes View All Quotes Originally Posted By brodband8:
Originally Posted By MILSPEC556:
Huh? I don't even have an ATPIAL-C. Are you high or somethin? |
|
I apologize in advance.
ZX636R Master Race |
My apologies if this has already been asked somewhere in this thread, but have any FNH M4A1 lowers been used for the program?
|
|
|
|
|
We are not citizens, We are suspects.
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.