User Panel
User Panel
User Panel
PA, USA
|
Posted: 5/27/2023 6:08:58 AM EDT
[Last Edit: arilulu14]
[#1]
This what I got so far
 It’s a chopped 6920 upper and I have a RAS on the way I’m not sure what I’m guna do about the optic, I’d really like an Elcan but we’re they ever really put on Mod 0 or Block 1 guns? Or were they only ever used after the DD rails came around? I was looking for pics of that set up and couldnt really find much at all It’s between that and a 30mm Aimpoint with Peq 2 |
|
|
NC, USA
|
Posted: 5/27/2023 12:35:01 PM EDT
[#2]
|
|
|
|
Posted: 5/27/2023 10:41:06 PM EDT
[#3]
I may have made a bastardized mod 0 and 1. Took a 10.3 colt fsp and chopped a DD lite rail so I have a free float hand guard. So a mod 0.5.
|
|
|
|
MN, USA
|
Posted: 5/28/2023 12:09:46 AM EDT
[#4]
Quote HistoryOriginally Posted By metalsaber: I may have made a bastardized mod 0 and 1. Took a 10.3 colt fsp and chopped a DD lite rail so I have a free float hand guard. So a mod 0.5. I see you. 
|
|
|
|
Posted: 5/28/2023 6:57:37 AM EDT
[#5]
Quote HistoryOriginally Posted By metalsaber: You use a M16A1 lower? Thats what I used. |
|
|
|
|
Posted: 5/28/2023 7:40:34 AM EDT
[#6]
Quote HistoryQuote HistoryOriginally Posted By THEdtw: Originally Posted By metalsaber: I may have made a bastardized mod 0 and 1. Took a 10.3 colt fsp and chopped a DD lite rail so I have a free float hand guard. So a mod 0.5. I see you. https://i.imgur.com/F0pIDro.jpeg Nice. |
|
|
|
|
Posted: 5/29/2023 9:24:35 AM EDT
[#7]
Got most of it together yesterday. Went with a Xeno Birdcage flash hider since it looks pretty close and I can run an additional can instead of having to swap suppressors.
    |
|
|
|
NC, USA
|
Posted: 5/29/2023 12:27:01 PM EDT
[Last Edit: Eyekahn]
[#8]
Finally ditched my gen 2 Sopmod. Got a gen 1 on the way.
What's the sling setup on a 2005 era Mod 0? Noticed most NSW ones are single point. I'm assuming CQD rear? |
|
|
|
Posted: 5/29/2023 1:01:58 PM EDT
[#9]
|
|
|
|
|
Posted: 5/29/2023 1:05:11 PM EDT
[#10]
Quote HistoryOriginally Posted By Combat_Diver: Colt Cage Code M4 flat top upper https://www.ar15.com/media/mediaFiles/32677/A0408BCC-676E-4524-92F4-9ED6CCDB27C1_jpe-2833372.JPG Same but FN https://www.ar15.com/media/mediaFiles/32677/31C075E3-FBEB-401E-AAAC-FCC5AB380D82_jpe-2833373.JPG CD.... I'm assuming that the CAGE marked Colt uppers are showing up in the supply chain now? |
|
|
|
USA
|
Posted: 5/29/2023 1:49:30 PM EDT
[#11]
Quote HistoryOriginally Posted By Combat_Diver: Colt Cage Code M4 flat top upper https://www.ar15.com/media/mediaFiles/32677/A0408BCC-676E-4524-92F4-9ED6CCDB27C1_jpe-2833372.JPG Same but FN https://www.ar15.com/media/mediaFiles/32677/31C075E3-FBEB-401E-AAAC-FCC5AB380D82_jpe-2833373.JPG There is that “C” mark again on the FN uppers. |
|
|
|
Posted: 5/29/2023 1:52:34 PM EDT
[#12]
Quote HistoryOriginally Posted By RTrover: There is that “C” mark again on the FN uppers. Got 6 of them. |
|
|
|
|
Posted: 5/29/2023 1:53:39 PM EDT
[#13]
Quote HistoryOriginally Posted By TGWLDR: CD.... I'm assuming that the CAGE marked Colt uppers are showing up in the supply chain now? Don't know date of manufacture as they were already unwrapped at this armorery. |
|
|
|
|
Posted: 5/29/2023 3:06:18 PM EDT
[#14]
Quote HistoryOriginally Posted By Combat_Diver: Don't know date of manufacture as they were already unwrapped at this armorery. Quote HistoryOriginally Posted By Combat_Diver: Originally Posted By TGWLDR: CD.... I'm assuming that the CAGE marked Colt uppers are showing up in the supply chain now? Don't know date of manufacture as they were already unwrapped at this armorery. Thank you sir. |
|
|
|
|
Posted: 5/29/2023 8:49:44 PM EDT
[Last Edit: HipSh0T]
[#15]
Quote HistoryOriginally Posted By TGWLDR: CD.... I'm assuming that the CAGE marked Colt uppers are showing up in the supply chain now? Quote HistoryOriginally Posted By TGWLDR: Originally Posted By Combat_Diver: Colt Cage Code M4 flat top upper https://www.ar15.com/media/mediaFiles/32677/A0408BCC-676E-4524-92F4-9ED6CCDB27C1_jpe-2833372.JPG Same but FN https://www.ar15.com/media/mediaFiles/32677/31C075E3-FBEB-401E-AAAC-FCC5AB380D82_jpe-2833373.JPG CD.... I'm assuming that the CAGE marked Colt uppers are showing up in the supply chain now? I recently bought a NIW dot matrix C Square forge marked Colt upper that looks exactly like that FN one without FN's Cage Code from Midway USA. |
|
|
|
PA, USA
|
Posted: 5/29/2023 9:41:23 PM EDT
[#16]
Quote HistoryOriginally Posted By metalsaber: Got most of it together yesterday. Went with a Xeno Birdcage flash hider since it looks pretty close and I can run an additional can instead of having to swap suppressors. https://www.ar15.com/media/mediaFiles/57852/9P8A0559-2833076.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0554-2833073.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0557-2833075.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0555-2833074.jpg That looks really good man, debating on if I’ll paint mine |
|
|
|
Posted: 5/30/2023 7:30:39 AM EDT
[#17]
Quote HistoryOriginally Posted By arilulu14: That looks really good man, debating on if I'll paint mine Quote HistoryOriginally Posted By arilulu14: Originally Posted By metalsaber: Got most of it together yesterday. Went with a Xeno Birdcage flash hider since it looks pretty close and I can run an additional can instead of having to swap suppressors. https://www.ar15.com/media/mediaFiles/57852/9P8A0559-2833076.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0554-2833073.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0557-2833075.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0555-2833074.jpg That looks really good man, debating on if I'll paint mine |
|
|
|
MD, USA
|
Posted: 5/30/2023 2:19:12 PM EDT
[#18]
Quote HistoryOriginally Posted By SecretSquirell: Why are you hiding the purple with that rail cover!?  Let Barney breathe!It's funny you say that, after I took the pics I decided to pull the rail cover off...Barney is out in force now baby! |
|
|
NC, USA
|
Posted: 5/30/2023 5:03:06 PM EDT
[#19]
|
|
|
|
Posted: 5/30/2023 5:57:43 PM EDT
[#20]
|
|
|
|
|
Posted: 5/30/2023 6:25:35 PM EDT
[#21]
Quote HistoryOriginally Posted By droys86: It's funny you say that, after I took the pics I decided to pull the rail cover off...Barney is out in force now baby! Quote HistoryOriginally Posted By droys86: Originally Posted By SecretSquirell: Why are you hiding the purple with that rail cover!? Let Barney breathe!It's funny you say that, after I took the pics I decided to pull the rail cover off...Barney is out in force now baby! 
|
|
|
|
|
Posted: 5/30/2023 10:49:36 PM EDT
[#22]
Originally Posted By Eyekahn: https://i.imgur.com/CpDlQaY.jpg Originally Posted By metalsaber: Got most of it together yesterday. Went with a Xeno Birdcage flash hider since it looks pretty close and I can run an additional can instead of having to swap suppressors. https://www.ar15.com/media/mediaFiles/57852/9P8A0559-2833076.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0554-2833073.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0557-2833075.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0555-2833074.jpg |
|
|
|
|
Posted: 5/31/2023 8:08:59 AM EDT
[#23]
Quote HistoryOriginally Posted By Dyzastr: Very cool. Probably could've traded someone for a 7". I hate to see nice rails get chopped, but that's a cool setup. Quote HistoryOriginally Posted By Dyzastr: Originally Posted By metalsaber: Got most of it together yesterday. Went with a Xeno Birdcage flash hider since it looks pretty close and I can run an additional can instead of having to swap suppressors. https://www.ar15.com/media/mediaFiles/57852/9P8A0559-2833076.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0554-2833073.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0557-2833075.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0555-2833074.jpg Thanks. I'm sure I could have but I had this on hand and wasn't using it so figured why not. Pretty happy with how it turned out. |
|
|
|
|
Posted: 5/31/2023 7:37:26 PM EDT
[#24]
Quote HistoryOriginally Posted By metalsaber: Thanks. I'm sure I could have but I had this on hand and wasn't using it so figured why not. Pretty happy with how it turned out. Quote HistoryOriginally Posted By metalsaber: Originally Posted By Dyzastr: Originally Posted By metalsaber: Got most of it together yesterday. Went with a Xeno Birdcage flash hider since it looks pretty close and I can run an additional can instead of having to swap suppressors. https://www.ar15.com/media/mediaFiles/57852/9P8A0559-2833076.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0554-2833073.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0557-2833075.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0555-2833074.jpg Thanks. I'm sure I could have but I had this on hand and wasn't using it so figured why not. Pretty happy with how it turned out. |
|
|
|
|
Posted: 5/31/2023 8:32:07 PM EDT
[#25]
Quote HistoryOriginally Posted By Dyzastr: Gotta make do with what you've got. I really like the lite rails, but found it strange that the 6 o'clock rail sits really low. I wonder if it was for accessory space? Like when vfg's but up against light mounts etc? Quote HistoryOriginally Posted By Dyzastr: Originally Posted By metalsaber: Originally Posted By Dyzastr: Originally Posted By metalsaber: Got most of it together yesterday. Went with a Xeno Birdcage flash hider since it looks pretty close and I can run an additional can instead of having to swap suppressors. https://www.ar15.com/media/mediaFiles/57852/9P8A0559-2833076.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0554-2833073.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0557-2833075.jpg https://www.ar15.com/media/mediaFiles/57852/9P8A0555-2833074.jpg Thanks. I'm sure I could have but I had this on hand and wasn't using it so figured why not. Pretty happy with how it turned out. |
|
|
|
|
Posted: 5/31/2023 9:48:27 PM EDT
[Last Edit: Dyzastr]
[#26]
I missed out on two different old logo eotechs so this is the optic for now. Looking to get an old logo exps3-0 or a 553. The trijicon was missing the rds mount and by a stroke of good luck I found someone with an mrds kit plus the exact rds mount and offset peep sight I needed. Just a placeholder till I get another eotech.
(Excuse the carpet and potato pic. At the in-laws and the carpet in this room was destroyed by grand babies. Oh yeah, and don’t mind the fake peq15. Was given to me with a purchase and I had to see what it looked like.)  Attached FileFigured I’d throw this one up while I’m here.  Attached File |
|
|
|
USA
|
Posted: 5/31/2023 10:45:42 PM EDT
[#27]
ECOS and 20 round mag. Well done.
|
|
|
|
Posted: 5/31/2023 10:55:51 PM EDT
[#28]
Quote HistoryOriginally Posted By Dyzastr: I missed out on two different old logo eotechs so this is the optic for now. Looking to get an old logo exps3-0 or a 553. The trijicon was missing the rds mount and by a stroke of good luck I found someone with an mrds kit plus the exact rds mount and offset peep sight I needed. Just a placeholder till I get another eotech. (Excuse the carpet and potato pic. At the in-laws and the carpet in this room was destroyed by grand babies. Oh yeah, and don’t mind the fake peq15. Was given to me with a purchase and I had to see what it looked like.) https://www.ar15.com/media/mediaFiles/471387/8E640102-6A1F-434A-9642-0E9A0B740542_jpe-2836139.JPG Figured I’d throw this one up while I’m here.https://www.ar15.com/media/mediaFiles/471387/653D1871-23C5-4E93-8FD4-ED8CE4BE9D9C_jpe-2836150.JPG Tano ecos is my favorite clone optic. Looks great! |
|
|
|
|
Posted: 6/1/2023 2:00:06 AM EDT
[#29]
Originally Posted By BePhreed: ECOS and 20 round mag. Well done. Originally Posted By JLAudio: Tano ecos is my favorite clone optic. Looks great! Thanks for the kind words. I had one back in 2018 and regrettably sold it. Finally got another one. Wish I could find an itw pic to justify. The only pics I've been able to find are of m4a1's with it. |
|
|
|
TX, USA
|
Posted: 6/2/2023 7:18:26 PM EDT
[#30]
This comment gave me aids and I had to share
https://imgur.com/a/3Mgk9E7 Here's an awful pic of mine I had on hand, didn't want to make a comment without a pic. https://imgur.com/a/RS3a6vW |
|
|
GEO
|
Posted: 6/2/2023 7:46:58 PM EDT
[Last Edit: 100roundclipazine]
[#31]
Quote HistoryOriginally Posted By Goodma27: This comment gave me aids and I had to share https://imgur.com/a/3Mgk9E7 Here's an awful pic of mine I had on hand, didn't want to make a comment without a pic. https://imgur.com/a/RS3a6vW Hahaha, "yeah thats kinda dumb im building a better clone but changing everything to what i think is better overall" On a side note, It was nice knowing you all and cloning, just sold all my cqbr parts and moved back into the HK dark side... |
|
|
|
Posted: 6/4/2023 10:11:58 AM EDT
[Last Edit: Dyzastr]
[#32]
Quote HistoryOriginally Posted By 100roundclipazine: Hahaha, "yeah thats kinda dumb im building a better clone but changing everything to what i think is better overall" On a side note, It was nice knowing you all and cloning, just sold all my cqbr parts and moved back into the HK dark side... |
|
|
|
NC, USA
|
Posted: 6/4/2023 2:24:45 PM EDT
[Last Edit: Eyekahn]
[#33]
Quote HistoryOriginally Posted By Dyzastr: Lol. You'll be back. They all come back eventually. See you again in a year or two. I've been back like 6 times haha  If anyone wants to trade a fat body 951 for my Black/Painted LED M3X w/ dual pad let me know! |
|
|
|
Posted: 6/4/2023 7:04:16 PM EDT
[Last Edit: Midazoslam]
[#34]
 Anyone seen more of this CQBR? Supposedly 10th SFG CIF. |
|
|
|
|
Posted: 6/4/2023 8:25:26 PM EDT
[Last Edit: Vehemence]
[#35]
Quote HistoryOriginally Posted By Eyekahn: I've been back like 6 times haha https://i.imgur.com/re3gkzn.jpg If anyone wants to trade a fat body 951 for my Black/Painted LED M3X w/ dual pad let me know! Quote HistoryOriginally Posted By Eyekahn: Originally Posted By Dyzastr: Lol. You'll be back. They all come back eventually. See you again in a year or two. I've been back like 6 times haha https://i.imgur.com/re3gkzn.jpg If anyone wants to trade a fat body 951 for my Black/Painted LED M3X w/ dual pad let me know! @Eyekahn I asked you this in a different thread, maybe it was the GWOT, but anyway, what brand(s) & colors are you using to rattle that beautiful grayish urban camo that disappears against concrete? Love it. ETA: I’m guessing it’s some combination of tans and browns, however, it comes out looking kind of a ‘cement’ or ‘granite’ gray. In another pic on another thread, looks like you snapped it against your garage floor or something, totally disappears. Thanks. |
|
|
|
|
Posted: 6/4/2023 8:33:03 PM EDT
[#36]
Quote HistoryOriginally Posted By Vehemence: @Eyekahn I asked you this in a different thread, maybe it was the GWOT, but anyway, what brand(s) & colors are you using to rattle that beautiful grayish urban camo that disappears against concrete? Love it. ETA: I’m guessing it’s some combination of tans and browns, however, it comes out looking kind of a ‘cement’ or ‘granite’ gray. In another pic on another thread, looks like you snapped it against your garage floor or something, totally disappears. Thanks. 1 page back, post #40. |
|
|
|
NC, USA
|
Posted: 6/4/2023 8:36:43 PM EDT
[#37]
Quote HistoryOriginally Posted By Vehemence: @Eyekahn I asked you this in a different thread, maybe it was the GWOT, but anyway, what brand(s) & colors are you using to rattle that beautiful grayish urban camo that disappears against concrete? Love it. ETA: I’m guessing it’s some combination of tans and browns, however, it comes out looking kind of a ‘cement’ or ‘granite’ gray. In another pic on another thread, looks like you snapped it against your garage floor or something, totally disappears. Thanks. It's rustoleum camo khaki and earth brown. I just lightly dust the khaki. It does blend in with my garage floor with the fluorescent lighting. Thanks man. @rtutah has experienced with some straight up gray paint mixed in with these two colors. It looks really good. Not sure what color or brand the gray is. |
|
|
|
Posted: 6/4/2023 9:51:42 PM EDT
[Last Edit: Vehemence]
[#38]
Quote HistoryOriginally Posted By Eyekahn: It's rustoleum camo khaki and earth brown. I just lightly dust the khaki. It does blend in with my garage floor with the fluorescent lighting. Thanks man. @rtutah has experienced with some straight up gray paint mixed in with these two colors. It looks really good. Not sure what color or brand the gray is. Quote HistoryOriginally Posted By Eyekahn: Originally Posted By Vehemence: @Eyekahn I asked you this in a different thread, maybe it was the GWOT, but anyway, what brand(s) & colors are you using to rattle that beautiful grayish urban camo that disappears against concrete? Love it. ETA: I’m guessing it’s some combination of tans and browns, however, it comes out looking kind of a ‘cement’ or ‘granite’ gray. In another pic on another thread, looks like you snapped it against your garage floor or something, totally disappears. Thanks. It's rustoleum camo khaki and earth brown. I just lightly dust the khaki. It does blend in with my garage floor with the fluorescent lighting. Thanks man. @rtutah has experienced with some straight up gray paint mixed in with these two colors. It looks really good. Not sure what color or brand the gray is. Thanks, Eyekahn. My primary go-to colors are all Rustoleum: camo sand, earth brown, and deep forest green. Tried khaki in the past, but it was too light for the projects I was working on. Ended up deciding to use sand as my third color instead of khaki (w/green & brown, or just w/brown), but it does add a lot of yellowish tint… Maybe I’ll have to try some khaki again on a new project, just with brown. @rtutah Please do tell - and pics too, or steer me to where you posted them previously. I’ll likely be posting a new build or two here again in the near future, as I now have six more SBR approvals pending… |
|
|
|
|
Posted: 6/4/2023 10:34:07 PM EDT
[#39]
Quote HistoryOriginally Posted By Vehemence: Thanks, Eyekahn. My primary go-to colors are all Rustoleum: camo sand, earth brown, and deep forest green. Tried khaki in the past, but it was too light for the projects I was working on. Ended up deciding to use sand as my third color instead of khaki (w/green & brown, or just w/brown), but it does add a lot of yellowish tint Maybe I'll have to try some khaki again on a new project, just with brown. @rtutah Please do tell - and pics too, or steer me to where you posted them previously. I'll likely be posting a new build or two here again in the near future, as I now have six more SBR approvals pending @Vehemence, I think you may be trying to use too many colors. I once tried using green and did not like the results. I use the old Skilcraft Tan Obliterating Compound as a base and work from there. Sometimes I don't even cover all the black anodizing; sometimes I hold the can closer to concentrate the flow and color, sometimes I only fog it from distance to create thinner clouds of color. Regardless, when I'm happy with the base, I pick up the Rustoleum Dark Earth and make some clouds with it. Then I swap colors back to the lighter Skilcraft and a swatch of mesh to create some scales. I do this will both colors so that I have both light and dark colored scales. The grey I've used is just some Rustoleum primer I had laying around. It looks quite good with both shades of brown. The Skilcraft stuff wears off pretty fast but the Rustoleum seems to be a bit more durable. I've found Krylon to be too durable though, which is why I don't use it. A good paint job looks best after it's been abused and gets that salty look. There's a little grey on there but this is mostly Skilcraft TOC and Rustoleum Dark Earth.  |
|
|
|
|
Posted: 6/5/2023 12:24:54 AM EDT
[Last Edit: Vehemence]
[#40]
Quote HistoryOriginally Posted By RTUtah: @Vehemence, I think you may be trying to use too many colors. I once tried using green and did not like the results. I use the old Skilcraft Tan Obliterating Compound as a base and work from there. Sometimes I don't even cover all the black anodizing; sometimes I hold the can closer to concentrate the flow and color, sometimes I only fog it from distance to create thinner clouds of color. Regardless, when I'm happy with the base, I pick up the Rustoleum Dark Earth and make some clouds with it. Then I swap colors back to the lighter Skilcraft and a swatch of mesh to create some scales. I do this will both colors so that I have both light and dark colored scales. The grey I've used is just some Rustoleum primer I had laying around. It looks quite good with both shades of brown. The Skilcraft stuff wears off pretty fast but the Rustoleum seems to be a bit more durable. I've found Krylon to be too durable though, which is why I don't use it. A good paint job looks best after it's been abused and gets that salty look. There's a little grey on there but this is mostly Skilcraft TOC and Rustoleum Dark Earth. https://i.imgur.com/cvbsp02.jpg Quote HistoryOriginally Posted By RTUtah: Originally Posted By Vehemence: Thanks, Eyekahn. My primary go-to colors are all Rustoleum: camo sand, earth brown, and deep forest green. Tried khaki in the past, but it was too light for the projects I was working on. Ended up deciding to use sand as my third color instead of khaki (w/green & brown, or just w/brown), but it does add a lot of yellowish tint Maybe I'll have to try some khaki again on a new project, just with brown. @rtutah Please do tell - and pics too, or steer me to where you posted them previously. I'll likely be posting a new build or two here again in the near future, as I now have six more SBR approvals pending @Vehemence, I think you may be trying to use too many colors. I once tried using green and did not like the results. I use the old Skilcraft Tan Obliterating Compound as a base and work from there. Sometimes I don't even cover all the black anodizing; sometimes I hold the can closer to concentrate the flow and color, sometimes I only fog it from distance to create thinner clouds of color. Regardless, when I'm happy with the base, I pick up the Rustoleum Dark Earth and make some clouds with it. Then I swap colors back to the lighter Skilcraft and a swatch of mesh to create some scales. I do this will both colors so that I have both light and dark colored scales. The grey I've used is just some Rustoleum primer I had laying around. It looks quite good with both shades of brown. The Skilcraft stuff wears off pretty fast but the Rustoleum seems to be a bit more durable. I've found Krylon to be too durable though, which is why I don't use it. A good paint job looks best after it's been abused and gets that salty look. There's a little grey on there but this is mostly Skilcraft TOC and Rustoleum Dark Earth. https://i.imgur.com/cvbsp02.jpg I’ve actually only done one rifle with more than two colors; sand, earth brown & deep forest green. I, like you, left some black anodizing untouched in a few areas on that one, so I suppose it’s actually four colors. Turned out pretty cool, but I won’t post it here as it’s not a clone of anything. Aside from that one and another rifle I painted all green, the rest I’ve rattled so far (and there have been a few) are all just two colors, sand and earth brown. There are pics of some of them in the SOPMOD and GWOT threads. They’re all a lil’ salty - I like ‘em dirty. I’ve been toying with the idea of doing something with some gray in it. Eyekahn’s Mk18 photo shot on concrete inspired me further (though he didn’t use any gray ) I’m thinking I may do some kind of matte light gray with dark earth brown combo…Thanks again to both of you guys for your responses. And, nice sticks!  |
|
|
|
NC, USA
|
Posted: 6/5/2023 4:52:42 PM EDT
[#41]
Sopmod>everything.
|
|
|
|
Posted: 6/6/2023 4:43:02 PM EDT
[#42]
How correct is the LaRue Aimpoint mount?
|
|
|
|
NC, USA
|
Posted: 6/6/2023 4:51:04 PM EDT
[#43]
Quote HistoryOriginally Posted By Lancelot: How correct is the LaRue Aimpoint mount? LT150? Very. Lots of itw photos of them especially on those Larue rail mod 0's. Love the Larue mod 0's |
|
|
|
Posted: 6/7/2023 2:47:32 AM EDT
[#44]
FYI-Big Army finally approved for general issue last month black/tan CTR stocks, B5 black/tan stocks and Hogue black stocks all with QD mounts on them. They will trickle down onto remaining guns.
QUICK RELEASE SLING SWIVEL ATTACHEMENT, RAIL MOUNTED PART NUMBER 13110153 NSN 1005-01-706-2552 QUICK RELEASE SLING SWIVEL ATTACHEMENT, RAIL MOUNTED PART NUMBER 13110154 NSN 1005-01-706-2366 TACTICAL SLING (BLACK) w/ QD rings PART NUMBER 13110155 NSN 1005-01-706-2558 TACTICAL SLING (BLACK) w/ QD rings PART NUMBER 13110156-1 NSN 1005-01-693-8723 TACTICAL SLING (TAN) w/ QD rings PART NUMBER 13110156-2 NSN 1005-01-692-2559 TACTICAL SLING (BLACK) w/ QD rings PART NUMBER 13110157-1 NSN 1005-01-625-4470 TACTICAL SLING (TAN) w/ QD rings PART NUMBER 13110157-2 NSN 1005-01-707-1744 VERTICAL PISTOL GRIP ASSEMBLY (TAN) (KAC style) PART NUMBER 13110158 NSN 1005-01-707-1842 BUTTSTOCK ASSEMBLY (BLACK) (Hogue) PART NUMBER 13110159 NSN 1005-01-706-2547 BUTTSTOCK ASSEMBLY (BLACK) (B5 stlye, no battery compartments) PART NUMBER 13110161-1 NSN 1005-01-706-2373 BUTTSTOCK ASSEMBLY (TAN) (B5 stlye, no battery compartments) PART NUMBER 13110161-2 NSN 1005-01-706-2510 BUTTSTOCK ASSEMBLY (BLACK) (CTR) PART NUMBER 13110162-1 NSN 1005-01-614-7778 BUTTSTOCK ASSEMBLY (TAN) (CTR) PART NUMBER 13110162-2 NSN 1005-01-616-4923 |
|
|
|
|
Posted: 6/7/2023 3:44:21 AM EDT
[#45]
|
|
|
|
|
Posted: 6/7/2023 8:59:06 AM EDT
[#46]
Quote HistoryOriginally Posted By Combat_Diver: FYI-Big Army finally approved for general issue last month black/tan CTR stocks, B5 black/tan stocks and Hogue black stocks all with QD mounts on them. They will trickle down onto remaining guns. QUICK RELEASE SLING SWIVEL ATTACHEMENT, RAIL MOUNTED PART NUMBER 13110153 NSN 1005-01-706-2552 QUICK RELEASE SLING SWIVEL ATTACHEMENT, RAIL MOUNTED PART NUMBER 13110154 NSN 1005-01-706-2366 TACTICAL SLING (BLACK) w/ QD rings PART NUMBER 13110155 NSN 1005-01-706-2558 TACTICAL SLING (BLACK) w/ QD rings PART NUMBER 13110156-1 NSN 1005-01-693-8723 TACTICAL SLING (TAN) w/ QD rings PART NUMBER 13110156-2 NSN 1005-01-692-2559 TACTICAL SLING (BLACK) w/ QD rings PART NUMBER 13110157-1 NSN 1005-01-625-4470 TACTICAL SLING (TAN) w/ QD rings PART NUMBER 13110157-2 NSN 1005-01-707-1744 VERTICAL PISTOL GRIP ASSEMBLY (TAN) (KAC style) PART NUMBER 13110158 NSN 1005-01-707-1842 BUTTSTOCK ASSEMBLY (BLACK) (Hogue) PART NUMBER 13110159 NSN 1005-01-706-2547 BUTTSTOCK ASSEMBLY (BLACK) (B5 stlye, no battery compartments) PART NUMBER 13110161-1 NSN 1005-01-706-2373 BUTTSTOCK ASSEMBLY (TAN) (B5 stlye, no battery compartments) PART NUMBER 13110161-2 NSN 1005-01-706-2510 BUTTSTOCK ASSEMBLY (BLACK) (CTR) PART NUMBER 13110162-1 NSN 1005-01-614-7778 BUTTSTOCK ASSEMBLY (TAN) (CTR) PART NUMBER 13110162-2 NSN 1005-01-616-4923 M16-Series Rifle, M4/M4A1 Carbine: See the New AAL Items |
|
|
|
|
Posted: 6/7/2023 5:31:42 PM EDT
[#47]
Quote HistoryOriginally Posted By Eyekahn: LT150? Very. Lots of itw photos of them especially on those Larue rail mod 0's. Love the Larue mod 0's Quote HistoryOriginally Posted By Eyekahn: Originally Posted By Lancelot: How correct is the LaRue Aimpoint mount? LT150? Very. Lots of itw photos of them especially on those Larue rail mod 0's. Love the Larue mod 0's |
|
|
|
USA
|
Posted: 6/7/2023 7:42:35 PM EDT
[#48]
How are you guys timing muzzle devices with 10.3 barrels with DD rails? Trying to use a Sico A2 ASR mount and not much room between the rail and the flats.
|
|
|
|
Posted: 6/7/2023 8:19:59 PM EDT
[#49]
Quote HistoryOriginally Posted By OHBuckeyes: How are you guys timing muzzle devices with 10.3 barrels with DD rails? Trying to use a Sico A2 ASR mount and not much room between the rail and the flats. https://i.imgur.com/iySRPhM.jpg Use the proper muzzle devices that the platform was built for? |
|
|
|
|
Posted: 6/7/2023 9:37:30 PM EDT
[#50]
Quote HistoryOriginally Posted By OHBuckeyes: How are you guys timing muzzle devices with 10.3 barrels with DD rails? Trying to use a Sico A2 ASR mount and not much room between the rail and the flats. https://i.imgur.com/iySRPhM.jpg One option: Bike wrench |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File
