User Panel
Originally Posted By TheManimal: The only clone I have at the moment to offer is a Johnny Rifle clone (close), but I don't live too far from Wilmington (foothills) and would be willing to drive...that is if non-clones are allowed to participate View Quote |
|
|
So I was thinking about going for a Recce build, but I also have a MK12 Mod 1, so I'm thinking the two uppers would be too similar. Now I am thinking of doing a mini Seal Recce build with the Medium FF RAS. Anyone know what barrel length would make the AEM5 sit flush? Maybe around 13.5 or so?
|
|
Creator of the most viewed EE thread in ARFCOM history.
|
Originally Posted By cdholmes:
So I was thinking about going for a Recce build, but I also have a MK12 Mod 1, so I'm thinking the two uppers would be too similar. Now I am thinking of doing a mini Seal Recce build with the Medium FF RAS. Anyone know what barrel length would make the AEM5 sit flush? Maybe around 13.5 or so? View Quote |
|
|
Originally Posted By cdholmes:
So I was thinking about going for a Recce build, but I also have a MK12 Mod 1, so I'm thinking the two uppers would be too similar. Now I am thinking of doing a mini Seal Recce build with the Medium FF RAS. Anyone know what barrel length would make the AEM5 sit flush? Maybe around 13.5 or so? View Quote Ditch Mk12 go NSW Recce! |
|
|
Originally Posted By Eyekahn: I think 13.7 sits flush with a 10.75 urx like on movie stars rig. Isn’t the medium FF RAS 10-3/8? Ditch Mk12 go NSW Recce! View Quote |
|
Creator of the most viewed EE thread in ARFCOM history.
|
Originally Posted By cdholmes: I was thinking about selling my Mod 1 and the 3.5-15 NXS on top but I sat it down and stared at it for a while today and just couldn’t post them for sale . I was going to keep the Mod 1 and was in the process of building the Recce but figured they were too similar to have both. That’s why I was thinking the shorter version. Plus I still have a x24 NXS to use. View Quote |
|
|
|
Originally Posted By Eyekahn:
Finally got to the range on a good day to test the rig. Still have some tweaking to do. https://i.imgur.com/xpWmeqQ.jpg View Quote |
|
Retired Army
NRA Instructor Certified Glock Armorer No step on snek! Homies! In need of a m300 scout light body. Don’t care what brand. |
Originally Posted By Eyekahn:
Finally got to the range on a good day to test the rig. Still have some tweaking to do. https://i.imgur.com/xpWmeqQ.jpg View Quote |
|
PSALMS 144-1
|
Hey gents. With regards to the medium RAS and flush AEM5 question i would go with 13.5. Mine is 13.7 and I have a quarter inch between the can and the rail. I should add that my Rail is a URX 3.1 in 10.75 and it is timed completely flush against the receiver (this can also effect length but in a very small way).
Attached File Attached File Attached File |
|
WTB: Short Action Remington MARS rail. Hit me up. I’ll make it worth your time.
Never shoot a large caliber man with a small caliber bullet |
Originally Posted By Eyekahn:
Finally got to the range on a good day to test the rig. Still have some tweaking to do. https://i.imgur.com/xpWmeqQ.jpg View Quote |
|
Jesus came to comfort the afflicted and afflict the comfortable. - My Pastor
|
Originally Posted By JJREA: I meeeeeeaaaaannnnn.... It's just..... Beautiful. I bet it shoots as nice as it looks..... View Quote Shot some older hand loaded 77TMK. It didn't like them very much. Shot 5 1.5 moa groups. Shot one group with dirty Tula. It was 1.5 moa as well. Need to get my hands on some factory match ammo and start developing a load for it. See what bullet it likes. Shot 1/3 ISPC steel at 25 yards. Doing 22422 drills with a full size Carboard ISPC in the middle. 2.5 power wasn’t bad but I’d like a Docter up top. |
|
|
I've got this MRE sitting in a box. Other than Lilja, who has match grade barrels with carbine gas in the 14.5"-16" range? I seem to be having a hard time finding any.
|
|
"That story, that avatar...
May the blessings of KEK continue your winning and the MAGA flow from the heavens!" Madcap72 WTB -DD MK18 RIS II with FSP cutout |
Originally Posted By Infidel4life11: though it's not clone Compass Lake Engineering can spin you whatever you want. I had them do a 14.5" Recon barrel profiled for the ops inc brake/collar with a matching bolt and it's flawless. Frank was who I dealt with and he originally wanted me to do a carbine length gas. I talked him into mid-length for use with my Med RAS. I absolutely love it. Shitty picture but you get the idea https://www.AR15.Com/media/mediaFiles/325471/2018-06-20_18_29_34-585758.jpg View Quote My Douglas shoots lights out. Though I'm getting evil thoughts of doing a 13" mid length. |
|
|
Originally Posted By Outrider: Huge +1 for CLE. What blank did you work off of? My Douglas shoots lights out. Though I'm getting evil thoughts of doing a 13" mid length. https://i.imgur.com/zIBMFes.jpg https://i.imgur.com/Q1zBgYz.jpg http://i.imgur.com/Ug1Tdpi.jpg View Quote |
|
|
Originally Posted By Outrider: Huge +1 for CLE. What blank did you work off of? My Douglas shoots lights out. Though I'm getting evil thoughts of doing a 13" mid length. https://i.imgur.com/zIBMFes.jpg https://i.imgur.com/Q1zBgYz.jpg http://i.imgur.com/Ug1Tdpi.jpg View Quote |
|
Retired Army
NRA Instructor Certified Glock Armorer No step on snek! Homies! In need of a m300 scout light body. Don’t care what brand. |
Originally Posted By Outrider:
Though I'm getting evil thoughts of doing a 13" mid length. View Quote |
|
Creator of the most viewed EE thread in ARFCOM history.
|
They are both solid options and "eyekahnic"!
Originally Posted By cdholmes: I am thinking the same thing. I have a Larue 18" Stealth I was going to have cut down for the Recce, but I am thinking about having it cut down shorter, possibly to 13.7" or 13.5" to sit flush with either the Medium RAS or a midlength URX. Although I am not sure I would have enough room for the Ops profile. https://www.spikestactical.com/collections/upper-parts/products/parts-upper-parts-tapered-micro-suppressor?variant=32521181452 |
|
|
Originally Posted By Outrider: They are both solid options and "eyekahnic"! Take a look at Spike's collar/block combo. I have one that I want to play with. It's a gas block and SPR collar in one so it takes up less barrel space and would allow you to run a shorter barrel. https://www.spikestactical.com/collections/upper-parts/products/parts-upper-parts-tapered-micro-suppressor?variant=32521181452 https://cdn.shopify.com/s/files/1/1450/8200/products/SUGB150_2048x2048.jpg?v=1484172815 View Quote |
|
|
Originally Posted By Eyekahn: Ooohhh shooot!!!! View Quote |
|
|
Originally Posted By Eyekahn: Hah thanks. My colt buffer spring is wearing out, it’s got about 15k on it. Ejecting at 1 o’clock with 77gr. Ordered a Red Sprinco. Shot some older hand loaded 77TMK. It didn't like them very much. Shot 5 1.5 moa groups. Shot one group with dirty Tula. It was 1.5 moa as well. Need to get my hands on some factory match ammo and start developing a load for it. See what bullet it likes. Shot 1/3 ISPC steel at 25 yards. Doing 22422 drills with a full size Carboard ISPC in the middle. 2.5 power wasn’t bad but I’d like a Docter up top. View Quote |
|
Jesus came to comfort the afflicted and afflict the comfortable. - My Pastor
|
Originally Posted By Outrider: Take a look at Spike's collar/block combo. I have one that I want to play with. It's a gas block and SPR collar in one so it takes up less barrel space and would allow you to run a shorter barrel. https://www.spikestactical.com/collections/upper-parts/products/parts-upper-parts-tapered-micro-suppressor?variant=32521181452 https://cdn.shopify.com/s/files/1/1450/8200/products/SUGB150_2048x2048.jpg?v=1484172815 View Quote |
|
Creator of the most viewed EE thread in ARFCOM history.
|
Originally Posted By Eyekahn:
Finally got to the range on a good day to test the rig. Still have some tweaking to do. https://i.imgur.com/xpWmeqQ.jpg View Quote |
|
http://www.amazon.com/Gentle-Propositions-J-S-Economos/dp/0615997635
|
I love my 13.7 with the AEM5. I like the spikes gas block thing. But if you do that make sure you have a barrel with the correct size port. My Noveske Barrel has a huge port and I’d have been in trouble without my PRI adjustable block. Now if spikes made that block in an adjustable version.
Attached File |
|
WTB: Short Action Remington MARS rail. Hit me up. I’ll make it worth your time.
Never shoot a large caliber man with a small caliber bullet |
Originally Posted By Movistar:
I love my 13.7 with the AEM5. I like the spikes gas block thing. But if you do that make sure you have a barrel with the correct size port. My Noveske Barrel has a huge port and I’d have been in trouble without my PRI adjustable block. Now if spikes made that block in an adjustable version. View Quote ETA: And that build is incredible. URX AEM combo is always a good one. I recently came into a URX II rifle length that I thought about giving the recce treatment but I'm on the PRI train right now. |
|
|
Originally Posted By Munzy:
I've got this MRE sitting in a box. Other than Lilja, who has match grade barrels with carbine gas in the 14.5"-16" range? I seem to be having a hard time finding any. View Quote |
|
|
|
I totally dig the mini recce concept.
|
|
Jesus came to comfort the afflicted and afflict the comfortable. - My Pastor
|
Originally Posted By Outrider: That's a good point. I've got an already chopped (16 to 14.5) Novekse that would make a good candidate for the 13" but I haven't confirmed its accuracy yet. I currently have the Douglas in the 15" range which is proven but I'm hesitant to go any shorter on it in case I want to go back. I've become a big fan of the Bootleg adjustable carriers so I may throw one in here (gasp not clone correct) to throttle the gas. ETA: And that build is incredible. URX AEM combo is always a good one. I recently came into a URX II rifle length that I thought about giving the recce treatment but I'm on the PRI train right now. View Quote My Noveske Barrel is more accurate than both of my Douglas 18 inch barrels I owned. One HCS and one CLE. I did lose a little velocity but the plate still goes ping at 712 yards. It honestly did everything my Mk12 did. But it’s so much more balanced and easy to carry and use. While I ended up not loving the NX8 as much as I thought I Love NF still. I think the perfect optic for this rifle is the 2.5-10x24 with a MRDS on top. Attached File Attached File Attached File |
|
WTB: Short Action Remington MARS rail. Hit me up. I’ll make it worth your time.
Never shoot a large caliber man with a small caliber bullet |
Originally Posted By Movistar:
Thanks man. I get the PRI train. I’m really into it. But for me the URX 3.1 is the first Rail I’ve truly loved. Meaning the first one I didn’t want to swap to something else the minute I installed it. My Noveske Barrel is more accurate than both of my Douglas 18 inch barrels I owned. One HCS and one CLE. I did lose a little velocity but the plate still goes ping at 712 yards. It honestly did everything my Mk12 did. But it’s so much more balanced and easy to carry and use. While I ended up not loving the NX8 as much as I thought I Love NF still. I think the perfect optic for this rifle is the 2.5-10x24 with a MRDS on top. https://www.AR15.Com/media/mediaFiles/392133/B9570B31-BDA8-4C7F-9DCA-C6D61D8FB5AE-605520.JPGhttps://www.AR15.Com/media/mediaFiles/392133/2F88C085-56C7-44CA-8BEE-9B526CAC69C7-605521.JPGhttps://www.AR15.Com/media/mediaFiles/392133/6624178F-37FD-452C-908D-8BA7A0DCBE15-605523.JPG View Quote View All Quotes View All Quotes Originally Posted By Movistar:
Originally Posted By Outrider: That's a good point. I've got an already chopped (16 to 14.5) Novekse that would make a good candidate for the 13" but I haven't confirmed its accuracy yet. I currently have the Douglas in the 15" range which is proven but I'm hesitant to go any shorter on it in case I want to go back. I've become a big fan of the Bootleg adjustable carriers so I may throw one in here (gasp not clone correct) to throttle the gas. ETA: And that build is incredible. URX AEM combo is always a good one. I recently came into a URX II rifle length that I thought about giving the recce treatment but I'm on the PRI train right now. My Noveske Barrel is more accurate than both of my Douglas 18 inch barrels I owned. One HCS and one CLE. I did lose a little velocity but the plate still goes ping at 712 yards. It honestly did everything my Mk12 did. But it’s so much more balanced and easy to carry and use. While I ended up not loving the NX8 as much as I thought I Love NF still. I think the perfect optic for this rifle is the 2.5-10x24 with a MRDS on top. https://www.AR15.Com/media/mediaFiles/392133/B9570B31-BDA8-4C7F-9DCA-C6D61D8FB5AE-605520.JPGhttps://www.AR15.Com/media/mediaFiles/392133/2F88C085-56C7-44CA-8BEE-9B526CAC69C7-605521.JPGhttps://www.AR15.Com/media/mediaFiles/392133/6624178F-37FD-452C-908D-8BA7A0DCBE15-605523.JPG |
|
|
|
Originally Posted By Outrider:
Despite what Eyekahn wants I'm making this my ".mil'ish recce picture thread." That is a recce that uses commonly seen/issued parts. I'd love to see some of the cool combinations people can come up with using the "pool" of parts/brands we've seen. Slight update: I swapped rings out because the old 1.00" Nightforce rings did not allow me to run my Butler Creek front cap and clear the recce rail. I didn't want to step up all the way to 1.125" rings so I found some 1.075" made by TPS (well respected in the PRS competitions and similar to NF in construction/design) which gave me just enough clearance without getting too high. I'm fond of 1.50" optic height so with the recce rail and these rings I'm at a very manageable 1.55". I'm still debating on chopping all the way to 13" to shorten the package up but still take advantage of the midlength gas and AEM5 setup. I guess it would be a true proper mini recce at that point. https://i.imgur.com/Kzx1FOQ.jpg?1 https://i.imgur.com/lVhnphD.jpg?1 https://i.imgur.com/YfZ7C6b.jpg?1 View Quote |
|
|
Originally Posted By Eyekahn: Got keep this thread on track. If we open it up to all these other builds it’ll just become the RECCE thread. Let’s keep it on topic with NSW/Delta Recce builds. View Quote |
|
|
Originally Posted By Dobs013:
Atlas came in and the x24 should be here next week! https://i.imgur.com/A69Bfml.jpg View Quote X24 is gonna set it off! |
|
|
Originally Posted By Dobs013:
Atlas came in and the x24 should be here next week! https://i.imgur.com/A69Bfml.jpg View Quote |
|
- Selling left nut for a Wilcox NF T1/MRDS mount.
|
|
As much as I like to paint things, I do t think I can paint this rail....maybe one day but I think it will most likely stay black. Spent too much for the correct markings to cover with paint
|
|
|
Jesus came to comfort the afflicted and afflict the comfortable. - My Pastor
|
Originally Posted By Dobs013:
As much as I like to paint things, I do t think I can paint this rail....maybe one day but I think it will most likely stay black. Spent too much for the correct markings to cover with paint View Quote |
|
|
|
Originally Posted By Dobs013:
That's the plan....I don't think I can spray this one. View Quote View All Quotes View All Quotes Originally Posted By Dobs013:
Originally Posted By Outrider: I'd definitely leave it alone. I haven't painted anything in a long time and I don't miss it. ...Nothing is safe! You could just tape off the markings. |
|
|
- Selling left nut for a Wilcox NF T1/MRDS mount.
|
Originally Posted By Dobs013: Hahahahaahah I do like the way this one turned out....but I just can't do it to this one https://i.imgur.com/cQZ6Fvp.jpg View Quote Someone needs to snatch this up. It’s a deal. https://www.ar15.com/forums/Equipment-Exchange/WTS-NightForce-2-5-10x24-NXS-Mil-R-Reticle-W-1-375-Rings-/163-1785255/ |
|
|
- Selling left nut for a Wilcox NF T1/MRDS mount.
|
Originally Posted By lancecriminal86: @Munzy Fulton carries Criterion 1:8 carbine gas HBAR barrels. That's what I was considering for mine, maybe with a set-screw match FSB. For an MRE a Criterion would be plenty IMO, paired with a S&B Short Dot or similar old school low-power variable. View Quote |
|
"That story, that avatar...
May the blessings of KEK continue your winning and the MAGA flow from the heavens!" Madcap72 WTB -DD MK18 RIS II with FSP cutout |
Jesus came to comfort the afflicted and afflict the comfortable. - My Pastor
|
Originally Posted By JJREA:
Did I somehow miss that this thread included DELTA recce's too. Or did that get changed at some point? Not sure how I missed that........ Can't remember if these were posted yet then.....: https://i.imgur.com/wcUPYun.jpg https://i.imgur.com/I8Jz0lN.jpg https://i.imgur.com/dOIxV74.jpg https://i.imgur.com/h8rVj3T.jpg View Quote |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.