AR Sponsor
Official Arizona Regulators triggers thread (Page 7 of 22)
|
Originally Posted By Thefryzone: The first mass shooting we have with a forced reset or a binary or a super safety.And they will be outlawed Just like bump stocks.... 
|
Even though it may seem that the OP is mentally disabled, calling him a "retard" is a personal attack. -DKProf
This is bud light marketing, meets Ocean Gate engineering with Sig public relations level of quality. -RC03
This is bud light marketing, meets Ocean Gate engineering with Sig public relations level of quality. -RC03
Member
Joined:
Jul 2025
Posts:
238
EE: 100% (73)
TN, USA
|
Originally Posted By lugnutwrench2: Is that because the geometry of the buffer is different, or because the SCW stock won't work with an FRT? You need an scw BCG to run the scw buffer. I’ve got an extra I’ll sell cheap  My PDX has a RB 3pos with scw setup and it runs like a madman 
|
Built a Heat clone with one of my SBR lowers and tossed one of these in it. Hol-e-smokes, haha. I haven't giggled that much in a long time. Even my buddy was laughing after he shot it. 180 rounds flawlessly. Even handled a 60 round Surefire mag with no hiccups. I did have to file the "module" slightly to get it to sit in the pocket in the upper but I expected some kind of modification. No biggie at all. Definitely gets warm real quick though. 
|
|
Originally Posted By -Shaggs-: Built a Heat clone with one of my SBR lowers and tossed one of these in it. Hol-e-smokes, haha. I haven't giggled that much in a long time. Even my buddy was laughing after he shot it. 180 rounds flawlessly. Even handled a 60 round Surefire mag with no hiccups. I did have to file the "module" slightly to get it to sit in the pocket in the upper but I expected some kind of modification. No biggie at all. Definitely gets warm real quick though. https://i.imgur.com/wy94CD3.jpeg |
Joined:
Jul 2025
Posts:
14
EE: 0% (0)
SC, USA
|
Originally Posted By -Shaggs-: Built a Heat clone with one of my SBR lowers and tossed one of these in it. Hol-e-smokes, haha. I haven't giggled that much in a long time. Even my buddy was laughing after he shot it. 180 rounds flawlessly. Even handled a 60 round Surefire mag with no hiccups. I did have to file the "module" slightly to get it to sit in the pocket in the upper but I expected some kind of modification. No biggie at all. Definitely gets warm real quick though. https://i.imgur.com/wy94CD3.jpeg Must be something in the air as I just had mine at the range yesterday afternoon for the first time. 3 pos AZR ran like a champ and is just super fun to shoot on this type of set up. https://youtube.com/shorts/IHe48eslnSg?si=Gf2LnMSiw1WbrpCr |
|
Learned more about the 3-POS AZR today. First, I dropped one into my 10.5" AR, suppressed, heavy buffer (Armaspec Stealth Recoil Spring H3-equivalent buffer) because it always runs suppressed. This gun runs 100%, have taken classes with it, etc. Great setup. AZR ran with no problems. Faster than my Gemtech HALO-T would have liked, I'll bet. It got pretty hot, and shot some sparks. Then I swapped uppers to my XM-177 clone, and it really didn't run. I got about half a mag of brrrrt, but for the most part it was single shot, and the next round wouldn't feed. I'm pretty sure the buffer was too heavy for that setup. BCG wasn't coming back far enough to pick up that next round. Fair enough. I didn't have another buffer to test. Lesson learned. Next we have my 10.5" lightweight piston gun. It's running the Superlative Arms piston setup, and I was unsure how it would handle the AZR. Handles it just fine! Mag after mag without a single hiccup. The ROF seems a bit slow, but that might be the buffer. I might switch to a standard H2 and see if that ups the ROF. All in all, another great (and expensive) AZR day. |
Joined:
Oct 2022
Posts:
10
EE: 0% (0)
AZ, USA
|
Nice to know the Armaspec Stealth H3 works running the AZR 3 position. I’ve got the H2 model running in my LMT SBR 10.5” with supers/subs and was thinking of trying one of the AZR’s out. Lost my original account here been over 20 years a member not sure why the original account didnt work to sign in. I just took some time away from everything. |
|
Originally Posted By BushmasterStaccato: Nice to know the Armaspec Stealth H3 works running the AZR 3 position. I’ve got the H2 model running in my LMT SBR 10.5” with supers/subs and was thinking of trying one of the AZR’s out. Lost my original account here been over 20 years a member not sure why the original account didnt work to sign in. I just took some time away from everything. @BushmasterStaccato what was your previous screen name on your old account that you couldn’t log in to? |
No one is untouchable.
|
Originally Posted By ScottS: Learned more about the 3-POS AZR today. First, I dropped one into my 10.5" AR, suppressed, heavy buffer (Armaspec Stealth Recoil Spring H3-equivalent buffer) because it always runs suppressed. This gun runs 100%, have taken classes with it, etc. Great setup. AZR ran with no problems. Faster than my Gemtech HALO-T would have liked, I'll bet. It got pretty hot, and shot some sparks. Then I swapped uppers to my XM-177 clone, and it really didn't run. I got about half a mag of brrrrt, but for the most part it was single shot, and the next round wouldn't feed. I'm pretty sure the buffer was too heavy for that setup. BCG wasn't coming back far enough to pick up that next round. Fair enough. I didn't have another buffer to test. Lesson learned. Next we have my 10.5" lightweight piston gun. It's running the Superlative Arms piston setup, and I was unsure how it would handle the AZR.  https://www.youtube.com/watch?v=__WM8ePkqJEHandles it just fine! Mag after mag without a single hiccup. The ROF seems a bit slow, but that might be the buffer. I might switch to a standard H2 and see if that ups the ROF. All in all, another great (and expensive) AZR day. Same gun brrrts using an H3 or H2 regular buffer. Might even run with an H1 but with the ROF increase from H3 to H2 I didn't bother with an H1. I'll give the stealths another shot in my 16" IRA'ish build and maybe a few other rifles. I have H3,H2, and carbine I can try again. |
Joined:
Oct 2022
Posts:
11
EE: 0% (0)
AZ, USA
Joined:
Oct 2022
Posts:
12
EE: 0% (0)
AZ, USA
|
Originally Posted By Bollocks44: @BushmasterStaccato what was your previous screen name on your old account that you couldn’t log in to? Would’ve been Jackal or Bushmasterar15. I used to sell some vinyl decals on the EE. I still have a few from way back (2007-2008) https://imgur.com/a/xgLDWJ4 |
|
Originally Posted By shultz: Interesting. I tried one(also H3) in an 11.5 w/AZR 3P and an M2, it would not brrrt. It would fire a single rd then dead trigger with the primer showing a very slight dimple. I assumed carrier bounce since it functioned checked fine. Same gun brrrts using an H3 or H2 regular buffer. Might even run with an H1 but with the ROF increase from H3 to H2 I didn't bother with an H1. I'll give the stealths another shot in my 16" IRA'ish build and maybe a few other rifles. I have H3,H2, and carbine I can try again. |
|
Originally Posted By ScottS: I get carrier bounce in my AR9, since it's a straight blow-back, but how does carrier bounce happen in a locked breech? I'm having trouble understanding that. This video shows it pretty well. The first part of the clip is what I think i was getting, slight carrier bounce but the bolt was staying locked hense the slight dimple on my primers. The second example is severe carrier/bolt bounce as the bolt is completely unlocking. Yes it's air soft but the symptoms are the same...  GBBR Stop the bolt bounce. |
|
Originally Posted By Jackal: Glad to have my old account back, thanks for the help Bollocks. I’ll check more into the AZR’s seeing different products on the website but more interested in the 3 position version. Be great to have it also run with a dedicated 22lr upper. 
|
No one is untouchable.
|
It's not completely clear on the website, will the Redacted work on the Geissele and a semi auto Milspec, or only in the Geissele? I thought at one point JD posted that he was including a disconnector for use in semi auto Milspec triggers to make sure it has the right contour to be drop in compatible. Is that still the case? If so, which model was that? |
|
Originally Posted By Wangstang: It's not completely clear on the website, will the Redacted work on the Geissele and a semi auto Milspec, or only in the Geissele? I thought at one point JD posted that he was including a disconnector for use in semi auto Milspec triggers to make sure it has the right contour to be drop in compatible. Is that still the case? If so, which model was that? It's designed to specifically work with the Geissele. It may not work with every mil-spec trigger out there as even some Geisseles have issues working 100% with the [Redacted] AZR. |
Why is the sky blue?
What makes the green grass grow?
What makes the green grass grow?
Member
Joined:
Nov 2022
Posts:
432
EE: 100% (17)
TX, USA
|
For anybody curious, my AZR ended up at at 0.657" as measured from the top flat of the device to bottom of the trip leg, to work in all my Larue MBT-2S lowers. Attached File I would definitely not jump straight to this measurement. Probably start around .700-.725" ish and work your way in. It took til around there before my upper would even close into the lower. Then sneak up on final dimension with a file/stone just the way JD shows in the video. |
|
Originally Posted By wentz912: For anybody curious, my AZR ended up at at 0.657" as measured from the top flat of the device to bottom of the trip leg, to work in all my Larue MBT-2S lowers. https://www.ar15.com/media/mediaFiles/491403/1000012891_jpg-3635738.JPG I would definitely not jump straight to this measurement. Probably start around .700-.725" ish and work your way in. It took til around there before my upper would even close into the lower. Then sneak up on final dimension with a file/stone just the way JD shows in the video. .669 is what mine measured. I got the MBT version straight from JD. |
To Those Who Have Given For FREEDOM I THANK YOU
1/26/2020
12/27/2023
1/26/2020
12/27/2023
Member
Joined:
Nov 2022
Posts:
433
EE: 100% (17)
TX, USA
|
Originally Posted By akethan: 3POS. The upper cutout on my HB300BO build was pretty loose and the hammer was rubbing the regulator. I milled the hammer down but the BCG still binds. I guess I'll try it in another setup. Isn't the BCG binding indicator of leg needing shortened? I know the 3 POS is supposed to be 100% drop in, but still. |
|
Does anyone have a REDACTED AZR they can measure? I didn't realize there were multiple versions when I bought mine and I bought the milspec one (AZR-15MR). I'm curious what the differences between the AZR-15M2 and REDACTED are. Is it solely leg length or is there cam differences as well? On the M2 I'm definitely getting engagement on the disco (SSA trigger) but function check doesn't work. I can't feel the hammer catching at all. The trigger never gets that close to being "dead" so I'm guessing the M2 has a shorter leg length that a redacted one? My AZR-15MR is: 0.8270 with top flipper vertical 0.8920 with top flipper pushed back |
|
Originally Posted By chuck1: Im using a battle arms M16 ambi safety with my 3 position. Originally Posted By chuck1: Originally Posted By 11boomboom: Any of you guys using ambi safeties for your AZR 3-pos? If so, which one? I'm considering swapping my single-sided out. Im using a battle arms M16 ambi safety with my 3 position. I found this Griffin one: Griffin Ambi short-throw M16 safety I wonder how this one is. |
Why is the sky blue?
What makes the green grass grow?
What makes the green grass grow?
|
Originally Posted By 11boomboom: I found this Griffin one: Griffin Ambi short-throw M16 safety I wonder how this one is. |
|
Originally Posted By shultz: My preferred 3P selector. I have 3 in use with AZR 3P's, zero issues. Originally Posted By shultz: Originally Posted By 11boomboom: I found this Griffin one: Griffin Ambi short-throw M16 safety I wonder how this one is. Thanks! |
Why is the sky blue?
What makes the green grass grow?
What makes the green grass grow?
Joined:
Dec 2023
Posts:
4170
EE: 100% (7)
USA
|
Originally Posted By ELittlefield: I really want to see what he's cooking up for 22. I figured once 3P production was running smoothly he'd get back to 22lr. Now that you can buy more than one 3P at a time and they always seem to be in-stock, maybe 22lr will see progress. |
Member
Joined:
Apr 2022
Posts:
428
EE: 0% (0)
MI, USA
|
Originally Posted By EagleArmsHBAR: Is JD posting anywhere else? It would be nice to know if he is working on anything else (3 round burst or other platforms). I had seen a 3rnd burst AZR that was listed on website without price and YouTube video showing it working. But now it’s not on the page. |
Joined:
Dec 2023
Posts:
4185
EE: 100% (7)
USA
|
Originally Posted By chuck1: Im using a battle arms M16 ambi safety with my 3 position. Would you happen to have some pics of it? That is one I’m considering but in some older reviews saying the levers stick out further from receiver then standard safety selectors. Maybe the new ones are better. |
|
I will buy one of these |
Stolen Firearm: Colt AR15, Serial # SP342380, 16" carbine. Stolen in California by Kevin Ayres, and taken to Missouri.
|
Originally Posted By HK94dude: I will buy one of these Originally Posted By HK94dude: I will buy one of these That would be perfect for my M16A4 clone. |
Why is the sky blue?
What makes the green grass grow?
What makes the green grass grow?
Official Arizona Regulators triggers thread (Page 7 of 22)
AR Sponsor