Armory Sponsor
Sig MCX/MPX Photo Thread (Page 41 of 46)
Joined:
Feb 2022
Posts:
18
EE: 0% (0)
AL, USA
Joined:
Feb 2022
Posts:
19
EE: 0% (0)
AL, USA
|
Originally Posted By michealj: I know where there are 2 SRD762Ti-qd’s sitting in a shop right now, they’ve been there for a couple years. They have a bunch of NOS suppressors. What’s the name of the shop? I’ll buy one right now I’ve been looking for one for a while |
Member
Joined:
Feb 2022
Posts:
1100
EE: 100% (162)
MA, USA
|
Picked my factory sbr this week. It was NOS early gen2, got it for the 2018 price! I’ve wanted an mpx since they were new but didn’t like the prices lately. Couldn’t pass this one up. They had a folding sig stock they had removed from an illegal sbr that a guy pawned and gave it to me free. Turns out it’s a FDE Kate moss stock. If anybody wants to trade it for your black one I’m game. 500 rounds of 5 different ammo types today, no issues. I’m a cheapskate but don’t regret spending the money for it! Thinking about a dedicated silencer because nothing I have is well suited for it. 
|
|
Originally Posted By Subpar: https://i.imgur.com/23WOdDo.jpg 
|
|
Attached File I wish I could of shared the face I made when I discovered that the MCX LEGACY is just as good as its successors.... Thoughts? Attached File |
Precious Metal Delivery Service
|
I was finally able to pick up my Rattler 300BO. Bought as a factory SBR in June 2022, went the SilencerShop route, and it took until this week to get approved. Pain in the ass, but some of it was a certification issue. I am going to go back to shop next week and buy a few suppressors and get in line again. I have a box of parts in the garage sitting around to throw on the new gun. Been so long since I bought it, its like a free fully kitted out gun at this point.   |
When faced with crisis, the man of character falls back on himself.
|
Originally Posted By GLD1980: /media/mediaFiles/sharedAlbum/1587095316660-489.gif I wish I could of shared the face I made when I discovered that the MCX LEGACY is just as good as its successors.... Thoughts? https://www.ar15.com/media/mediaFiles/196790/8_SIG_LEGACY_MCX16_5_56_jpg-2788408.JPG One would argue better because of the extended top rail you don’t have that pesky “loss of zero” everyone complains about. |
|
Originally Posted By KnightVulture: One would argue better because of the extended top rail you don’t have that pesky “loss of zero” everyone complains about. Originally Posted By KnightVulture: Originally Posted By GLD1980: /media/mediaFiles/sharedAlbum/1587095316660-489.gif I wish I could of shared the face I made when I discovered that the MCX LEGACY is just as good as its successors.... Thoughts? https://www.ar15.com/media/mediaFiles/196790/8_SIG_LEGACY_MCX16_5_56_jpg-2788408.JPG One would argue better because of the extended top rail you don’t have that pesky “loss of zero” everyone complains about. Lightest and longest rail of the civilian models. |
|
Originally Posted By KnightVulture: One would argue better because of the extended top rail you don’t have that pesky “loss of zero” everyone complains about. Originally Posted By SpyHawk: Lightest and longest rail of the civilian models. Anyone know if there is an old locked discussion thread for the LEGACY MCX? Search returned back nothing. |
Precious Metal Delivery Service
|
Originally Posted By GLD1980: Anyone know if there is an old locked discussion thread for the LEGACY MCX? Search returned back nothing. I seem to recall there was an original MCX mega thread, but it's been archived off probably by now. It usually gets just thrown in with the other threads now. |
|
Originally Posted By SpyHawk: I seem to recall there was an original MCX mega thread, but it's been archived off probably by now. It usually gets just thrown in with the other threads now. Anyone know who the Moderator is for this sub forum? Maybe we can ask to resurrect the original thread. I'm sure their is pages of valuable information. |
Precious Metal Delivery Service
|
Don't think I've posted this pic yet. It used to be spray painted. Attached File |
|
How do you like that stock? My MCX stamp just cleared and I'm considering the options. That has more girth for cheek weld than a Kate Moss folder, longer length of pull than their other folding/extending stock, and slimmer to fold up than putting something like a Magpul or B5 sopmod on the buffer tube side folding adapter. What you have there looks about perfect. |
never underestimate the stupidity of other people
Joined:
Oct 2016
Posts:
17276
EE: 100% (29)
GA, USA
|
you take yours outside and it gets dirt on it?!?!?!
|
"every exercise is a low back exercise if you do it wrong enough"
@MacManus
@MacManus
|
Originally Posted By WUPHF: Cerakoted the Rattler. https://www.ar15.com/media/mediaFiles/294984/D63D1133-D72C-4309-8BD5-FD831FBDF58C_jpe-2806104.JPG What colors did you use? Is the stock coated as well? |
|
Originally Posted By 60-Driver: What colors did you use? Is the stock coated as well? Originally Posted By 60-Driver: Originally Posted By WUPHF: Cerakoted the Rattler. https://www.ar15.com/media/mediaFiles/294984/D63D1133-D72C-4309-8BD5-FD831FBDF58C_jpe-2806104.JPG What colors did you use? Is the stock coated as well? Rifle is Noveske Tiger Eye Brown. Stock, optic mount, charging handle, trigger guard, and light mount are Field Drab with a small amount of Midnight Bronze (small enough you can’t see any of the metallic flake, I just didn’t have any more black or Patriot Brown to mix in) to darken it up a shade or two. Yep, stock is coated. |
|
Originally Posted By coachwhip99: What’s the name of the shop? I’ll buy one right now I’ve been looking for one for a while Originally Posted By coachwhip99: Originally Posted By michealj: I know where there are 2 SRD762Ti-qd’s sitting in a shop right now, they’ve been there for a couple years. They have a bunch of NOS suppressors. What’s the name of the shop? I’ll buy one right now I’ve been looking for one for a while I'm interested, too! |
|
Originally Posted By Sideswipeasaurus: How do you like that stock? My MCX stamp just cleared and I'm considering the options. That has more girth for cheek weld than a Kate Moss folder, longer length of pull than their other folding/extending stock, and slimmer to fold up than putting something like a Magpul or B5 sopmod on the buffer tube side folding adapter. What you have there looks about perfect. Originally Posted By Sideswipeasaurus: How do you like that stock? My MCX stamp just cleared and I'm considering the options. That has more girth for cheek weld than a Kate Moss folder, longer length of pull than their other folding/extending stock, and slimmer to fold up than putting something like a Magpul or B5 sopmod on the buffer tube side folding adapter. What you have there looks about perfect. Just saw your post. The spear folding stock has the same Lop as the black minimalist stock. Honestly, it's not to different than the Kate Moss. The sig cheek riser, to me, doesn't really change head position much; if that makes sense. It's pretty slick to the stock. I only picked it up to help with colder weather. I dig the stock though. One of the slicker folding options, while giving you just enough meat in the back. Originally Posted By steviesterno16: you take yours outside and it gets dirt on it?!?!?! |
Wtb: Noveske Gen3 Stripped Upper, AAC M42K Training Suppressor
"A Mk18 is a handgun with a stock"/"10.3 is a 50 yard and in gun" - From SHTF AR Thread
"A Mk18 is a handgun with a stock"/"10.3 is a 50 yard and in gun" - From SHTF AR Thread
|
Originally Posted By 2Keylows: @Sideswipeasaurus Just saw your post. The spear folding stock has the same Lop as the black minimalist stock. Honestly, it's not to different than the Kate Moss. The sig cheek riser, to me, doesn't really change head position much; if that makes sense. It's pretty slick to the stock. I only picked it up to help with colder weather. I dig the stock though. One of the slicker folding options, while giving you just enough meat in the back. Living out in the sticks makes it easier lol. Originally Posted By 2Keylows: Originally Posted By Sideswipeasaurus: How do you like that stock? My MCX stamp just cleared and I'm considering the options. That has more girth for cheek weld than a Kate Moss folder, longer length of pull than their other folding/extending stock, and slimmer to fold up than putting something like a Magpul or B5 sopmod on the buffer tube side folding adapter. What you have there looks about perfect. Just saw your post. The spear folding stock has the same Lop as the black minimalist stock. Honestly, it's not to different than the Kate Moss. The sig cheek riser, to me, doesn't really change head position much; if that makes sense. It's pretty slick to the stock. I only picked it up to help with colder weather. I dig the stock though. One of the slicker folding options, while giving you just enough meat in the back. Originally Posted By steviesterno16: you take yours outside and it gets dirt on it?!?!?! I wonder if a paracord wrap might be able to bring it up another quarter inch and keep it compact and comfortable. |
|
Originally Posted By Citizen904: https://i.ibb.co/yNX6YxS/4-A07-E518-34-C2-4349-9-E49-03-A028-F0-DAF0.jpg Your doing quite well adding SIG's to your collection. |
Precious Metal Delivery Service
|
Originally Posted By GLD1980: Anyone know who the Moderator is for this sub forum? Maybe we can ask to resurrect the original thread. I'm sure their is pages of valuable information. Originally Posted By GLD1980: Originally Posted By SpyHawk: I seem to recall there was an original MCX mega thread, but it's been archived off probably by now. It usually gets just thrown in with the other threads now. Anyone know who the Moderator is for this sub forum? Maybe we can ask to resurrect the original thread. I'm sure their is pages of valuable information. I am and I can't pull stuff out of archives. I've been good about toggling archiving off for mega threads when asked. So either it wasn't as important as you think, or is at the very bottom of the forum. |
Please, call me Joe
Follow me on Instagram!
http://instagram.com/tcba_joe/
Follow me on Instagram!
http://instagram.com/tcba_joe/
|
I've posted this before, I just want the first SPEAR pic in this thread. Attached File |
Put a new VIRTUS bbl in my old LEGACY and took it out break in. Unfortunately I keep having issues with a Korean made Gen2 RWB-100 Drum from Classic Arms. Any thoughts on how to boost its reliability besides throwing it in the trash? SIG LEGACY MCX Patrol new barrel test fire  Failed To Load Title |
Precious Metal Delivery Service
|
Hey, I just met you And this is crazy But that's not cover- Just concealment, baby Attached File |
|
Originally Posted By Omega9000: So for gen 1 mcx, I’m limited to the standard handguard, lancer, and the altrd ego right? No, check this out. https://www.virtuous-concepts.com/product-page/rattler-xtn ETA... Think I got that wrong it does everything but what you need I think. My apologies. |
Precious Metal Delivery Service
|
Originally Posted By Omega9000: So for gen 1 mcx, I’m limited to the standard handguard, lancer, and the altrd ego right? If you look for a thread called Legacy-Lt you can see pics where I had my local gunsmith mod a Spear-Lt handguard to fit my legacy. |
|
Originally Posted By Omega9000: So for gen 1 mcx, I’m limited to the standard handguard, lancer, and the altrd ego right? Sheffield Tactical I swear Midwest Industries made one, but maybe that was just the Virtus. I couldn't find anything. |
|
Originally Posted By sbye: Sheffield Tactical I swear Midwest Industries made one, but maybe that was just the Virtus. I couldn't find anything. I have a Midwest on my LEGACY so there out there. |
Precious Metal Delivery Service
|
All I need is the SIG Stock Adapter.https://www.sigsauer.com/mcx-stock-adapter.html I can then pair my SIG M400 SDI Series Switchblade Pistol with my MCX's and have a fully Ambi LEGACY MCX or MCX VIRTUS. The URG and Lower mate up perfectly like it was meant to be. LEGACY MCX Patrol URG Attached File MCX VIRTUS PATROL URG Attached File |
Precious Metal Delivery Service
|
Originally Posted By GLD1980: All I need is the SIG Stock Adapter.https://www.sigsauer.com/mcx-stock-adapter.html I can then pair my SIG M400 SDI Series Switchblade Pistol with my MCX's and have a fully Ambi LEGACY MCX or MCX VIRTUS. The URG and Lower mate up perfectly like it was meant to be. LEGACY MCX Patrol URG https://www.ar15.com/media/mediaFiles/196790/20230527_223630_jpg-2831643.JPG MCX VIRTUS PATROL URG https://www.ar15.com/media/mediaFiles/196790/20230527_223417_jpg-2831644.JPG You have no interference issues with the width of the upper with the SDI bolt release? When I had the PDQ bold release installed on mine it had to be trimmed down to get enough clearance. |
|
Originally Posted By SpyHawk: You have no interference issues with the width of the upper with the SDI bolt release? When I had the PDQ bold release installed on mine it had to be trimmed down to get enough clearance. I encountered no issues whatsoever. In fact the mate up was almost meant to be if it wasn't for the MCX's having a little bit of a thicker width profile but it wasn't an issue. No Gaps and I performed a function check and loaded, unloaded and verified bolt hold open and bolt release. |
Precious Metal Delivery Service
|
Originally Posted By Kublah: Rattler with a few configurations.. Short Handguard: https://www.dropbox.com/s/yjuvy9vqu7l3qpl/Short.png?raw=1 Midwest Industries 10": https://www.dropbox.com/s/0fwrh5k0gj16w83/MWI.png?raw=1 Sig 10.5" https://www.dropbox.com/s/xxr3i6suc7z5n2f/Sig10.png?raw=1 Yes it clears the handguard... https://www.dropbox.com/s/xebmv5tlckfj7rf/Muzzle.png?raw=1 Went and got to 50 posts so this should show... Pretty cool! |
|
Originally Posted By Kublah: Sig 10.5"  Pretty close to the same OAL as my 6.75" Virtus with the same handguard and SLH762C. Mine sticks out about half an inch. Attached File |
Sig MCX/MPX Photo Thread (Page 41 of 46)
Armory Sponsor