Armory Sponsor
post your aow/sbs pics!!! (Page 12 of 21)
|
Originally Posted By evlblkwpnz:
I hope to start taking people's money in the near future. I own a couple of companies in the swimming pool industry. One is blowing up and the other is stagnant, so I hope to replace the stagnant one with a very exclusive, focused, good ol' fashioned one at a time custom shop. The 6.5" guns will be built in very limited numbers and will be very expensive, but performance and attention to detail will be guaranteed. The Ferrari of Saiga 12 shotguns, if you will. evl.... That thing is fucking sweet. Saw your bids too. Now if I could just have NFA items. 
|
Strength Determination Merciless Forever
Nothing says "I've broken into the wrong house" than a sharp pointy thing backed up by 9 rounds of 00 buck....
Nothing says "I've broken into the wrong house" than a sharp pointy thing backed up by 9 rounds of 00 buck....
|
Originally Posted By TraptInTheSystem:
Originally Posted By evlblkwpnz:
I hope to start taking people's money in the near future. I own a couple of companies in the swimming pool industry. One is blowing up and the other is stagnant, so I hope to replace the stagnant one with a very exclusive, focused, good ol' fashioned one at a time custom shop. The 6.5" guns will be built in very limited numbers and will be very expensive, but performance and attention to detail will be guaranteed. The Ferrari of Saiga 12 shotguns, if you will. evl.... That thing is fucking sweet. Saw your bids too. Now if I could just have NFA items. You didn't see any bids on this one. It is completely disassembled and in a coffee can. Now that I am satisfied with the durability testing of some prototype parts and I am done making subtle improvements, it is time to finalize the build and refinish it. Here was its last session (however short) before I disassembled it.... it isn't for the timid 
https://www.youtube.com/watch?v=iowylsO3ScU |
Can a 6.5" Saiga 12 reliably run cheap birdshot in MD-20 drums? This one can....
http://www.youtube.com/watch?v=kLovVj7k6LM
http://www.youtube.com/watch?v=kLovVj7k6LM
|
Originally Posted By evlblkwpnz:
Originally Posted By TraptInTheSystem:
Originally Posted By evlblkwpnz:
I hope to start taking people's money in the near future. I own a couple of companies in the swimming pool industry. One is blowing up and the other is stagnant, so I hope to replace the stagnant one with a very exclusive, focused, good ol' fashioned one at a time custom shop. The 6.5" guns will be built in very limited numbers and will be very expensive, but performance and attention to detail will be guaranteed. The Ferrari of Saiga 12 shotguns, if you will. evl.... That thing is fucking sweet. Saw your bids too. Now if I could just have NFA items. You didn't see any bids on this one. It is completely disassembled and in a coffee can. Now that I am satisfied with the durability testing of some prototype parts and I am done making subtle improvements, it is time to finalize the build and refinish it. Here was its last session (however short) before I disassembled it.... it isn't for the timid
https://www.youtube.com/watch?v=iowylsO3ScU Damn autocorrect. I meant to put vids. Looks great though man. |
Strength Determination Merciless Forever
Nothing says "I've broken into the wrong house" than a sharp pointy thing backed up by 9 rounds of 00 buck....
Nothing says "I've broken into the wrong house" than a sharp pointy thing backed up by 9 rounds of 00 buck....
My name is viper5243, and i have a tok addiction.
Joined:
Apr 2007
Posts:
6733
EE: 100% (119)
AK, USA
|
Originally Posted By NYC-M4: That is awesome. Bet she kicks like a mule on crack.  Why would it kick more? You have less barrel and less pressure build up so the recoil would be less then the full size barrel. |
Originally Posted By mwarnick1: If you're not breaking parts you're not shooting enough.
|
Originally Posted By viper5243:
Why would it kick more? You have less barrel and less pressure build up so the recoil would be less then the full size barrel. Originally Posted By viper5243:
Originally Posted By NYC-M4:
That is awesome. Bet she kicks like a mule on crack.
Why would it kick more? You have less barrel and less pressure build up so the recoil would be less then the full size barrel. It's also now lighter, might kick more. Please send to me for testing of above stated theories. 
|
si vis pacem, para bellum
My name is viper5243, and i have a tok addiction.
Joined:
Apr 2007
Posts:
6734
EE: 100% (119)
AK, USA
|
Originally Posted By soldierman79: It's also now lighter, might kick more. Please send to me for testing of above stated theories. Originally Posted By soldierman79: Originally Posted By viper5243: Originally Posted By NYC-M4: That is awesome. Bet she kicks like a mule on crack. Why would it kick more? You have less barrel and less pressure build up so the recoil would be less then the full size barrel. It's also now lighter, might kick more. Please send to me for testing of above stated theories. For the amount of weight cut off it shouldn't matter. I would never try to shoot a full size mauser with one hand, but my 9" SBR one i can shoot all day one handed and it has very little recoil. Will be posting some pics of my Remington Model 11 when it gets finished. |
Originally Posted By mwarnick1: If you're not breaking parts you're not shooting enough.
|
Originally Posted By viper5243:
Why would it kick more? You have less barrel and less pressure build up so the recoil would be less then the full size barrel. Originally Posted By viper5243:
Originally Posted By NYC-M4:
That is awesome. Bet she kicks like a mule on crack.
Why would it kick more? You have less barrel and less pressure build up so the recoil would be less then the full size barrel. Because Im a recoil pussy duh. |
I WILL NOT COMPLY. lll
|
Originally Posted By Kristofer_G:
I got my Savage Automatic SBS reblued over the weekend. http://jggunsmith.files.wordpress.com/2013/07/sav_auto_sbs_blued01.jpg http://jggunsmith.files.wordpress.com/2013/07/sav_auto_sbs_blued02.jpg http://jggunsmith.files.wordpress.com/2013/07/sav_auto_sbs_blued03.jpg Still less the $500 into the gun, including the stamp. I bought a Remington model 11 the other day, your pics have inspired me. 
|
My name is viper5243, and i have a tok addiction.
Joined:
Apr 2007
Posts:
6736
EE: 100% (119)
AK, USA
Bought a few years ago and has been sitting in the back of the safe. Stock is cracked and the forearm has a split so looking for new-er ones. No idea who did the engraving on it.   |
Originally Posted By mwarnick1: If you're not breaking parts you're not shooting enough.
|
Originally Posted By viper5243:
Bought a few years ago and has been sitting in the back of the safe. Stock is cracked and the forearm has a split so looking for new-er ones. No idea who did the engraving on it.
http://i242.photobucket.com/albums/ff260/viper5243/DSC_0075_zpsfc67d8eb.jpg http://i242.photobucket.com/albums/ff260/viper5243/DSC_0076_zpsc513fbc9.jpg is that a squatch?? |
|
Originally Posted By MattNificent:
is that a squatch?? Originally Posted By MattNificent:
Originally Posted By viper5243:
Bought a few years ago and has been sitting in the back of the safe. Stock is cracked and the forearm has a split so looking for new-er ones. No idea who did the engraving on it.
http://i242.photobucket.com/albums/ff260/viper5243/DSC_0075_zpsfc67d8eb.jpg http://i242.photobucket.com/albums/ff260/viper5243/DSC_0076_zpsc513fbc9.jpg is that a squatch?? Manbearpig is real. |
|
anyone seen the sbs keltec ksg yet?
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=356531556 |
|
Originally Posted By the1337aaron:
anyone seen the sbs keltec ksg yet? http://www.gunbroker.com/Auction/ViewItem.aspx?Item=356531556 Looks incredible, but the thing I don't like about tube fed SBS is that capacity is reduced in most cases, unless something like the X-Mag is used. This is the main reason that I don't bother with anything that isn't mag fed. Reliability would be next. We have never taken in a mag fed shotgun for repair, not that they never break, but there is almost always a tube fed gun in the safe for me to work on. I have no direct experience with the KSG, but the tube fed mags are enough to keep me from wanting one. It does look awesome though. If they could produce a mag fed auto bullpup that would fit inside of that same envelope or smaller, I'd probably be all over one. evl.... |
Can a 6.5" Saiga 12 reliably run cheap birdshot in MD-20 drums? This one can....
http://www.youtube.com/watch?v=kLovVj7k6LM
http://www.youtube.com/watch?v=kLovVj7k6LM
|
Originally Posted By 911evo:
Found this in a family safe. My grandpa had it for ever, is this legal my today laws? It has a 18.25 barrel. <a href="http://s614.photobucket.com/user/nine11evo/media/IMG_20130801_192031_690.jpg.html" target="_blank">http://i614.photobucket.com/albums/tt229/nine11evo/IMG_20130801_192031_690.jpg</a> Yup, as long as the barrel isn't less than 18" and the over all length is not less than 26" you're good to go. Take a pic firing at night with a full power load I want to see the muzzle flash out of that beast. |
|
Originally Posted By NicoG:
Also posted in the class 3 section, but I'll put it here too <a href="http://imageshack.us/photo/my-images/191/dl07.jpg/" target="_blank">http://img191.imageshack.us/img191/5665/dl07.jpg</a> My pants just got extremely tight just now. |
I WILL NOT COMPLY. lll
|
Originally Posted By NYC-M4:
My pants just got extremely tight just now. Originally Posted By NYC-M4:
Originally Posted By NicoG:
Also posted in the class 3 section, but I'll put it here too <a href="http://imageshack.us/photo/my-images/191/dl07.jpg/" target="_blank">http://img191.imageshack.us/img191/5665/dl07.jpg</a> My pants just got extremely tight just now. Not sure if I should say thank you, or your welcome
|
|
REMINGTON 870 TACTICAL UBSBS
$400 Remington 870 Express $185 14" Remington 870 Barrel $45 Wilson Combat Right Hand +1 Extension Tube $70 Mesa Tactical LEO Stock Adapter $35 Magpul MIAD Grip $265 Magpul UBR Stock $20 Magpul Enhanced Rubber But-Pad $250 Surefire Remington 870 Rail $70 Mesa Tactical 6 Round Side Saddle $125 Trijicon Ghost Ring Night Sights $20 Magpul XTM Hand Stop Kit $20 Magpul Sling Mount Kit - Type 2 $25 Magpul UBR Aluminum Strike Plate $35 Mesa Tactical 5" Picatinny Rail $10 Magpul Ladder Rail Panel $15 Magpul XTM Enhanced Rail Panels |
|
Originally Posted By dgrey86:
[div style='text-align: center;']REMINGTON 870 TACTICAL UBSBS http://i40.tinypic.com/33kxgex.jpg http://i43.tinypic.com/sy6l1l.jpg $400 Remington 870 Express $185 14" Remington 870 Barrel $45 Wilson Combat Right Hand +1 Extension Tube $70 Mesa Tactical LEO Stock Adapter $35 Magpul MIAD Grip $265 Magpul UBR Stock $20 Magpul Enhanced Rubber But-Pad $250 Surefire Remington 870 Rail $70 Mesa Tactical 6 Round Side Saddle $125 Trijicon Ghost Ring Night Sights $20 Magpul XTM Hand Stop Kit $20 Magpul Sling Mount Kit - Type 2 $25 Magpul UBR Aluminum Strike Plate $35 Mesa Tactical 5" Picatinny Rail $10 Magpul Ladder Rail Panel $15 Magpul XTM Enhanced Rail Panels Looks nice... So, after tax, you spent 1800 on this? |
Got an e-mail today from a "bored housewife 34, looking for some action!"... Still trying to figure out how to email my laundry to her...
After browsing some pictures in here, and some prices, I got it how I want it now. Just need to line up the red dot with some slugs and I'm done.
Crappy cell phone pic, but you get the idea. I'll save the glamor shot with the DSLR for later. Dot is a vortex sparc. 14" bbl Not designed for accuracy. Just, close range fireball machine. :) |
|
Originally Posted By Kristofer_G: I got my Savage Automatic SBS reblued over the weekend.   http://jggunsmith.files.wordpress.com/2013/07/sav_auto_sbs_blued03.jpg Still less the $500 into the gun, including the stamp.  |
Many thanks to krpind for the Team Membership.
|
Damn nice! |
|
What 1913 rail in front of the Trak-Lock rear? EGW? Is the channel cut wide enough to see the front sight easily?
Originally Posted By beenaround:
Not the color you want but it's 14" with wood. http://i3.photobucket.com/albums/y100/beenaround/870wood_zps162c0dfb.jpg Originally Posted By beenaround:
Originally Posted By san_antonio_fj:
Does Anyone have a pic of an 870 sbs 13-14" with wood stock and od green duracoat or similar Not the color you want but it's 14" with wood. http://i3.photobucket.com/albums/y100/beenaround/870wood_zps162c0dfb.jpg |
|
Originally Posted By zen_grasshopper:
What 1913 rail in front of the Trak-Lock rear? EGW? Is the channel cut wide enough to see the front sight easily? Originally Posted By zen_grasshopper:
What 1913 rail in front of the Trak-Lock rear? EGW? Is the channel cut wide enough to see the front sight easily? Originally Posted By beenaround:
Originally Posted By san_antonio_fj:
Does Anyone have a pic of an 870 sbs 13-14" with wood stock and od green duracoat or similar Not the color you want but it's 14" with wood. http://i3.photobucket.com/albums/y100/beenaround/870wood_zps162c0dfb.jpg Im pretty sure it's a Wilson Combat rail - I'd have to dig it out of the safe to double check. Channel is wide enough, perfect clearance. |
Guns don't kill people, the gubbermint does.
Joined:
Dec 2006
Posts:
6522
EE: 100% (190)
PA, USA
|
Originally Posted By aIIan:
My 87OP... [div style='text-align: center;']http://allangreendale.net/dump/arfcom/870.sbs.jpg Barrel length? |
Originally Posted By MTNmyMag:
I always carry a gun so I cant get into any kind of a fight but a gun fight.
I always carry a gun so I cant get into any kind of a fight but a gun fight.
|
Originally Posted By SuperMoose:
Barrel length? Originally Posted By SuperMoose:
Originally Posted By aIIan:
My 87OP... [div style='text-align: center;']http://allangreendale.net/dump/arfcom/870.sbs.jpg Barrel length? 12" |
Guns don't kill people, the gubbermint does.
Joined:
Dec 2006
Posts:
6524
EE: 100% (190)
PA, USA
|
Originally Posted By aIIan:
12" Originally Posted By aIIan:
Originally Posted By SuperMoose:
Originally Posted By aIIan:
My 87OP... [div style='text-align: center;']http://allangreendale.net/dump/arfcom/870.sbs.jpg Barrel length? 12" Excellent. This is what I have to look forward to when my Form 1 comes back. Well, a 1/2 inch longer but who is counting. Unless you can convince me a 12" is a better way.
|
Originally Posted By MTNmyMag:
I always carry a gun so I cant get into any kind of a fight but a gun fight.
I always carry a gun so I cant get into any kind of a fight but a gun fight.
|
Originally Posted By SuperMoose:
Excellent. This is what I have to look forward to when my Form 1 comes back. Well, a 1/2 inch longer but who is counting. Unless you can convince me a 12" is a better way.Originally Posted By SuperMoose:
Originally Posted By aIIan:
Originally Posted By SuperMoose:
Originally Posted By aIIan:
My 87OP... [div style='text-align: center;']http://allangreendale.net/dump/arfcom/870.sbs.jpg Barrel length? 12" Excellent. This is what I have to look forward to when my Form 1 comes back. Well, a 1/2 inch longer but who is counting. Unless you can convince me a 12" is a better way.1/2 inch is a lot to a midget
Good looking 870, I got a 12.5'' AOW would like to do it up like yours |
|
Originally Posted By Kristofer_G:
I got my Savage Automatic SBS reblued over the weekend. http://jggunsmith.files.wordpress.com/2013/07/sav_auto_sbs_blued01.jpg http://jggunsmith.files.wordpress.com/2013/07/sav_auto_sbs_blued02.jpg http://jggunsmith.files.wordpress.com/2013/07/sav_auto_sbs_blued03.jpg Still less the $500 into the gun, including the stamp. I heard the recoil pulse is brutal on this style of shotgun. Any truth to that? |
My name is viper5243, and i have a tok addiction.
Joined:
Apr 2007
Posts:
6831
EE: 100% (119)
AK, USA
|
Originally Posted By Recusance: I heard the recoil pulse is brutal on this style of shotgun. Any truth to that? Originally Posted By Recusance: Originally Posted By Kristofer_G: I got my Savage Automatic SBS reblued over the weekend. http://jggunsmith.files.wordpress.com/2013/07/sav_auto_sbs_blued01.jpg http://jggunsmith.files.wordpress.com/2013/07/sav_auto_sbs_blued02.jpg http://jggunsmith.files.wordpress.com/2013/07/sav_auto_sbs_blued03.jpg Still less the $500 into the gun, including the stamp. I heard the recoil pulse is brutal on this style of shotgun. Any truth to that? I have the same thing in a Rem 11. Recoil feels like it is less then the full size barrel. The projectile is staying in the barrel for a shorter period of time and more of the powder is burning outside of the barrel. Just like how i can shoot my 9" 8mm Mauser all day long one handed. Less recoil but more BOOM |
Originally Posted By mwarnick1: If you're not breaking parts you're not shooting enough.
|
Originally Posted By viper5243:
I have the same thing in a Rem 11. Recoil feels like it is less then the full size barrel. The projectile is staying in the barrel for a shorter period of time and more of the powder is burning outside of the barrel. Just like how i can shoot my 9" 8mm Mauser all day long one handed. Less recoil but more BOOM Originally Posted By viper5243:
Originally Posted By Recusance:
Originally Posted By Kristofer_G:
I got my Savage Automatic SBS reblued over the weekend. http://jggunsmith.files.wordpress.com/2013/07/sav_auto_sbs_blued01.jpg http://jggunsmith.files.wordpress.com/2013/07/sav_auto_sbs_blued02.jpg http://jggunsmith.files.wordpress.com/2013/07/sav_auto_sbs_blued03.jpg Still less the $500 into the gun, including the stamp. I heard the recoil pulse is brutal on this style of shotgun. Any truth to that? I have the same thing in a Rem 11. Recoil feels like it is less then the full size barrel. The projectile is staying in the barrel for a shorter period of time and more of the powder is burning outside of the barrel. Just like how i can shoot my 9" 8mm Mauser all day long one handed. Less recoil but more BOOM I agree with my fellow Tokarev afflicted. It is pleasant to shoot, even with the very short LOP. It will knock my spectacles off if I don't keep squared up, but that is it. I shot about 200 shells through mine one day in an ASAA shotgun class. I would take my Savage over any pump gun. Another factor is the reciprocating mass is reduced with the shorter barrel, produces much the same effect as a skeletoninzed slide on race gun. Less mass bottoming out going forwards or backwards. I was thinking about fluting the bolt on mine and getting it TiN coated like a Salient Arms everything-they-make.
|
|
Originally Posted By viper5243:
[url=http://jggunsmith.files.wordpress.com/2013/07/sav_auto_sbs_blued02.jpg]http I have the same thing in a Rem 11. Recoil feels like it is less then the full size barrel. The projectile is staying in the barrel for a shorter period of time and more of the powder is burning outside of the barrel. Just like how i can shoot my 9" 8mm Mauser all day long one handed. Less recoil but more BOOM Sorry, I have no SBS/AOW pics to contribute, However, it would thrill my soul to see this 9" 8mm Mauser!
|
post your aow/sbs pics!!! (Page 12 of 21)
Armory Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter