User Panel
User Panel
User Panel
|
Posted: 1/6/2023 11:36:21 PM EDT
[#1]
Quote HistoryOriginally Posted By rbb2: https://i.imgur.com/RZocFYlh.jpg I guess they got over/never had their shortage last year then? 
|
|
|
|
|
Posted: 1/6/2023 11:39:02 PM EDT
[Last Edit: doubleplusgood]
[#2]
Quote HistoryOriginally Posted By rbb2: https://i.imgur.com/RZocFYlh.jpg Dude, where did you find that? I’ve been out for weeks I need some bad. I have been using the knock off stuff 
|
|
|
|
|
Posted: 1/6/2023 11:40:55 PM EDT
[#3]
Just picked this up today at More To Life Outfitters in Clinton, TN.
 Attached FileIt is a Samuel Riner Cane Creek with pebbles canvas handle. The steel is 80CrV2. It has a blade length of 4" and is 8.5" overall. |
|
|
|
|
Posted: 1/7/2023 12:17:57 AM EDT
[#4]
Quote HistoryOriginally Posted By 3xpert: Actually, that's leftover Taco meat and cheese. Goes well with all beef WI dogs. Sounds tasty. |
|
|
|
|
Posted: 1/7/2023 12:20:28 AM EDT
[#5]
Quote HistoryOriginally Posted By SecretSquirell: I guess they got over/never had their shortage last year then? The reason I got that many was because when I went to see if the big bottle I normally get was a better deal, they were all out of stock. |
|
|
|
|
Posted: 1/7/2023 12:26:12 AM EDT
[#6]
Quote HistoryOriginally Posted By 917-30: Just picked this up today at More To Life Outfitters in Clinton, TN. https://www.ar15.com/media/mediaFiles/440308/20230106_150613_jpg-2663202.JPG It is a Samuel Riner Cane Creek with pebbles canvas handle. The steel is 80CrV2. It has a blade length of 4" and is 8.5" overall. Good looking knife. |
|
|
|
|
Posted: 1/7/2023 12:27:37 AM EDT
[#7]
Happy Epiphany!
|
|
|
|
|
Posted: 1/7/2023 12:33:59 AM EDT
[#8]
Quote HistoryOriginally Posted By rbb2: A new one for Fiber Front Flip Friday. https://i.imgur.com/ijMn0wLh.jpg The print is from a few years ago; I was playing around with some online AI thing that would apply painting styles to a photo, then I saved that output and ordered it printed on canvas from wally world. Turned out pretty decent IMO. kinda creepy you have pictures of me burger? |
|
|
|
|
Posted: 1/7/2023 12:34:23 AM EDT
[#9]
Quote HistoryOriginally Posted By rbb2: That's a hard one to snag. it's novel. some fidget factor. |
|
|
|
|
Posted: 1/7/2023 12:35:24 AM EDT
[#10]
Quote Historythat does look pretty good the hotdog, not the glock |
|
|
|
|
Posted: 1/7/2023 12:37:06 AM EDT
[#11]
Quote HistoryOriginally Posted By PraesidiumFabrica: I am making a folder to send around to you fine folks to savagely roast me... I mean critique me Thinking of doing green micarta for it, something simple. micarta all the things the most beautiful things are often the simplest |
|
|
|
|
Posted: 1/7/2023 12:37:43 AM EDT
[#12]
Quote HistoryOriginally Posted By WIC: kinda creepy you have pictures of me burger? Yes, Urban XL for nearly half off. Couldn't resist at the price. |
|
|
|
|
Posted: 1/7/2023 12:40:31 AM EDT
[#13]
there was one I saw recently, can't remember where, reddit, BF, somewhere, at 400, almost pulled me in just for the price.
he sure does nice stuff anything wrong with yours at the lower price? |
|
|
|
|
Posted: 1/7/2023 12:41:28 AM EDT
[#14]
Quote HistoryOriginally Posted By 3xpert: Nice looking knife! What is it? trm atom with ti scales very nice knife |
|
|
|
|
Posted: 1/7/2023 12:41:41 AM EDT
[#15]
Quote HistoryOriginally Posted By SecretSquirell: Anyone have/have experience with an Invictus ATB? For whatever reason I kinda want one. yep kinda |
|
|
|
|
Posted: 1/7/2023 12:41:52 AM EDT
[#16]
Quote HistoryOriginally Posted By 917-30: Just picked this up today at More To Life Outfitters in Clinton, TN. https://www.ar15.com/media/mediaFiles/440308/20230106_150613_jpg-2663202.JPG It is a Samuel Riner Cane Creek with pebbles canvas handle. The steel is 80CrV2. It has a blade length of 4" and is 8.5" overall. Nice. I love little fixed blades. |
|
|
|
|
Posted: 1/7/2023 12:42:00 AM EDT
[#17]
Quote HistoryOriginally Posted By rbb2: https://i.imgur.com/RZocFYlh.jpg i thought there was a shortage? |
|
|
|
|
Posted: 1/7/2023 12:42:45 AM EDT
[#18]
Quote HistoryOriginally Posted By Idaholandho:  One, if not one of the best they have ever done. yeah, the ti scales really make it into a whole different knife. I like the weight and feel better. |
|
|
|
|
Posted: 1/7/2023 12:43:54 AM EDT
[#19]
Quote HistoryOriginally Posted By 917-30: Just picked this up today at More To Life Outfitters in Clinton, TN. https://www.ar15.com/media/mediaFiles/440308/20230106_150613_jpg-2663202.JPG It is a Samuel Riner Cane Creek with pebbles canvas handle. The steel is 80CrV2. It has a blade length of 4" and is 8.5" overall. i like the blade finish |
|
|
|
|
Posted: 1/7/2023 12:47:58 AM EDT
[#20]
Quote HistoryOriginally Posted By WIC: yep kinda Quote HistoryOriginally Posted By WIC: Originally Posted By SecretSquirell: Anyone have/have experience with an Invictus ATB? For whatever reason I kinda want one. yep kinda Worth getting or pass? Blade steel sounds interesting but I don't go swimming with my knives often. |
|
|
|
|
Posted: 1/7/2023 12:53:15 AM EDT
[#21]
I have been tempted by that version to check out the steel for fun. Haven't gotten there.
I have this variant. It is a nice design |
|
|
|
|
Posted: 1/7/2023 12:54:25 AM EDT
[#22]
Quote HistoryOriginally Posted By WIC: there was one I saw recently, can't remember where, reddit, BF, somewhere, at 400, almost pulled me in just for the price. he sure does nice stuff anything wrong with yours at the lower price? Not at all. His knives are incredibly undervalued by the secondary market compared to others of like quality, and I really don't know why because they're fantastic. |
|
|
|
|
Posted: 1/7/2023 12:54:39 AM EDT
[#23]
Sorry, that's not right, I have this version.
|
|
|
|
|
Posted: 1/7/2023 12:55:22 AM EDT
[#24]
Quote HistoryOriginally Posted By rbb2: Not at all. His knives are incredibly undervalued by the secondary market compared to others of like quality, and I really don't know why because they're fantastic. maybe he should be a big asshole like another SA maker... |
|
|
|
|
Posted: 1/7/2023 1:33:05 AM EDT
[#25]
Quote HistoryOriginally Posted By WIC: maybe he should be a big asshole like another SA maker... It seems to work for some folks. |
|
|
|
|
Posted: 1/7/2023 3:00:52 AM EDT
[Last Edit: PraesidiumFabrica]
[#26]
Well all I need to make the one for y’all as well as one for another arfcommer are one order.
Would y’all fine gentlemen prefer a Magnacut, S110V, or M398? We will see if sendcutsend gets me the titanium before Bos gets me the blades back or not. I know the mcmaster order will be here pronto, had to order some more form taps. My initial one has done about 40 holes by now and after 35 or so some of the “teeth” (threads?) broke away. It still works to thread fine and I can’t see any defects on the threads. In any case I’d feel better getting a new one  Attached FileProgress today on the other 3.  Attached File Attached FileAs you can see the Ti frame lock one has a much simpler screw set than the ones with scales. Playing with some ideas in my head to reduce the number of screws… there are some options. I will have to mess around in solidworks and see if I like the look of them though All the handles are rough shaped, they still need some final sanding and polishing. I think I will take the CF up to 1000grit or so. The G10 I will leave at 120 and the titanium I will scotch brite |
|
|
|
|
Posted: 1/7/2023 3:01:28 AM EDT
[#27]
I also start my job Monday, so we will see if that hampers anything, though I should be able to tinker on weekends
|
|
|
|
|
Posted: 1/7/2023 3:15:48 AM EDT
[#28]
Quote HistoryOriginally Posted By PraesidiumFabrica: Well all I need to make the one for y’all as well as one for another arfcommer are one order. Would y’all fine gentlemen prefer a Magnacut, S110V, or M398? We will see if sendcutsend gets me the titanium before Bos gets me the blades back or not. I know the mcmaster order will be here pronto, had to order some more form taps. My initial one has done about 40 holes by now and after 35 or so some of the “teeth” (threads?) broke away. It still works to thread fine and I can’t see any defects on the threads. In any case I’d feel better getting a new one https://www.ar15.com/media/mediaFiles/498570/9BDF5C23-0656-4248-8C7A-FBDABB8915DC_jpe-2663390.JPG Progress today on the other 3. https://www.ar15.com/media/mediaFiles/498570/5F66107D-56A7-489A-AFA0-1320C0C106AC_jpe-2663391.JPGhttps://www.ar15.com/media/mediaFiles/498570/684370A5-D7A3-478A-B61E-58A02E556EB8_jpe-2663392.JPG As you can see the Ti frame lock one has a much simpler screw set than the ones with scales. Playing with some ideas in my head to reduce the number of screws… there are some options. I will have to mess around in solidworks and see if I like the look of them though All the handles are rough shaped, they still need some final sanding and polishing. I think I will take the CF up to 1000grit or so. The G10 I will leave at 120 and the titanium I will scotch brite Nice. I don't think the steel makes much difference as I doubt any of us will beat on it much. More like ergos, function and usability. Personally I'm not a huge fan of S110V, I found it chippy. Magnacut seems good so far but it depends too on how far Bos will go with the heat treat. Will they get it up to 62+ or do they top out below that? I've never used M398 so it would be interesting to mess with that a bit and see what it's about. |
|
|
|
|
Posted: 1/7/2023 3:16:35 AM EDT
[#29]
Quote HistoryOriginally Posted By rbb2: Nice. I don't think the steel makes much difference as I doubt any of us will beat on it much. More like ergos, function and usability. Personally I'm not a huge fan of S110V, I found it chippy. Magnacut seems good so far but it depends too on how far Bos will go with the heat treat. Will they get it up to 62+ or do they top out below that? I've never used M398 so it would be interesting to mess with that a bit and see what it's about. I asked for 62 on my order for the Magnacut, we will see |
|
|
|
|
Posted: 1/7/2023 3:18:12 AM EDT
[#30]
Quote HistoryOriginally Posted By PraesidiumFabrica: I also start my job Monday, so we will see if that hampers anything, though I should be able to tinker on weekends Make sure you keep your priorities straight, young man. Knives first, then work. Don't go getting it all backwards like Kuraki did. Seriously though, good luck with the job! Hope it goes well for ya. |
|
|
|
|
Posted: 1/7/2023 9:21:36 AM EDT
[#31]
Work is overrated
And apparently it is my fault Kuraki stopped doing knives |
|
|
|
|
Posted: 1/7/2023 10:14:59 AM EDT
[#32]
Quote HistoryOriginally Posted By WIC: Work is overrated And apparently it is my fault Kuraki stopped doing knives Did he ever do anything with the matching mini keps? I was totally going to send him more money when they were ready but never heard anything. |
|
|
|
|
Posted: 1/7/2023 10:20:52 AM EDT
[#33]
No idea. I just heard I’m the reason he threw something at his bench one day, said fuck it, and never went back in. Kind of a heavy weight to have hanging over you. Makes me rethink all the stalking. A bit.
|
|
|
|
|
Posted: 1/7/2023 11:35:11 AM EDT
[#34]
|
|
|
|
|
Posted: 1/7/2023 11:35:54 AM EDT
[#35]
always a step behind...
|
|
|
|
|
Posted: 1/7/2023 11:36:12 AM EDT
[#36]
Quote HistoryOriginally Posted By SecretSquirell: I know we don't like BHQ but this is   https://www.youtube.com/watch?v=8s8tdKULaqsHaha |
|
|
|
|
Posted: 1/7/2023 11:36:19 AM EDT
[#37]
Quote HistoryOriginally Posted By PraesidiumFabrica: I asked for 62 on my order for the Magnacut, we will see that's fun |
|
|
|
|
Posted: 1/7/2023 11:36:43 AM EDT
[#38]
Quote HistoryOriginally Posted By rbb2: A new one for Fiber Front Flip Friday. https://i.imgur.com/ijMn0wLh.jpg The print is from a few years ago; I was playing around with some online AI thing that would apply painting styles to a photo, then I saved that output and ordered it printed on canvas from wally world. Turned out pretty decent IMO. And some deets on the knife? |
|
|
|
|
Posted: 1/7/2023 11:37:08 AM EDT
[#39]
Quote HistoryOriginally Posted By triburst1: https://www.ar15.com/media/mediaFiles/34777/05CDCC90-EFB3-47DB-B3DC-7B49D7178E49_jpe-2662846.JPG That blue is really cool |
|
|
|
|
Posted: 1/7/2023 11:46:52 AM EDT
[#40]
Quote HistoryOriginally Posted By PraesidiumFabrica: Well all I need to make the one for y’all as well as one for another arfcommer are one order. Would y’all fine gentlemen prefer a Magnacut, S110V, or M398? We will see if sendcutsend gets me the titanium before Bos gets me the blades back or not. I know the mcmaster order will be here pronto, had to order some more form taps. My initial one has done about 40 holes by now and after 35 or so some of the “teeth” (threads?) broke away. It still works to thread fine and I can’t see any defects on the threads. In any case I’d feel better getting a new one https://www.ar15.com/media/mediaFiles/498570/9BDF5C23-0656-4248-8C7A-FBDABB8915DC_jpe-2663390.JPG Progress today on the other 3. https://www.ar15.com/media/mediaFiles/498570/5F66107D-56A7-489A-AFA0-1320C0C106AC_jpe-2663391.JPGhttps://www.ar15.com/media/mediaFiles/498570/684370A5-D7A3-478A-B61E-58A02E556EB8_jpe-2663392.JPG As you can see the Ti frame lock one has a much simpler screw set than the ones with scales. Playing with some ideas in my head to reduce the number of screws… there are some options. I will have to mess around in solidworks and see if I like the look of them though All the handles are rough shaped, they still need some final sanding and polishing. I think I will take the CF up to 1000grit or so. The G10 I will leave at 120 and the titanium I will scotch brite aside from a bit more vanadium, is there any big difference/benefit over M390 for M398? |
|
|
|
|
Posted: 1/7/2023 11:47:23 AM EDT
[#41]
Quote HistoryOriginally Posted By rbb2: It seems to work for some folks. we can't all be like you |
|
|
|
|
Posted: 1/7/2023 11:56:49 AM EDT
[#42]
Quote HistoryLooks super tasty |
|
|
|
|
Posted: 1/7/2023 11:57:04 AM EDT
[#43]
Quote HistoryOriginally Posted By MrSig239: Not seeing color in the fiber. Is it supposed to be blue? My laptop doesn't do colors well. Nope just black |
|
|
|
|
Posted: 1/7/2023 11:57:46 AM EDT
[#44]
|
|
|
|
|
Posted: 1/7/2023 11:58:26 AM EDT
[#45]
Quote HistoryOriginally Posted By rbb2: https://i.imgur.com/RZocFYlh.jpg I thought there was a shortage going on |
|
|
|
|
Posted: 1/7/2023 12:01:40 PM EDT
[Last Edit: rbb2]
[#46]
Quote HistoryOriginally Posted By WIC: aside from a bit more vanadium, is there any big difference/benefit over M390 for M398? Quote HistoryOriginally Posted By WIC: aside from a bit more vanadium, is there any big difference/benefit over M390 for M398?  M398 offers very high edge retention for a stainless steel in combination with very good corrosion resistance. However, the toughness is very low and the carbide structure quite coarse for a powder metallurgy steel. S90V and S110V offer better toughness with a similar level of edge retention. S90V has somewhat lower corrosion resistance, but S110V and M398 are roughly comparable. M398 may be a bit easier to sharpen or grind than S90V and S110V due to less vanadium carbide; however, given its high wear resistance it is not going to be great either way. I think S90V and S110V are more balanced steels in general, and S125V still offers the highest edge retention of any stainless knife steel. I think it is good that Bohler added another stainless choice to the high wear resistance category as Crucible has had a monopoly in that area in the past. But I wish that Bohler had put more effort into designing a superior steel from the ground up rather than simply adding carbon and vanadium to a 30 year old steel (M390), ignoring advancements in steel design that even Bohler has patents in. |
|
|
|
|
Posted: 1/7/2023 12:12:42 PM EDT
[#47]
4 more beads this morning. Made these a little bigger circumference. Also I was wrong on wood types. They are Zebra wood and Bocote.
Waiting for more sun to do it's work so I can clean up the snow.  Attached File |
|
|
|
|
Posted: 1/7/2023 12:15:51 PM EDT
[#48]
Quote HistoryOriginally Posted By 917-30: Just picked this up today at More To Life Outfitters in Clinton, TN. https://www.ar15.com/media/mediaFiles/440308/20230106_150613_jpg-2663202.JPG It is a Samuel Riner Cane Creek with pebbles canvas handle. The steel is 80CrV2. It has a blade length of 4" and is 8.5" overall. I like that size and shape. Good looking knife. |
|
|
|
|
Posted: 1/7/2023 12:16:17 PM EDT
[#49]
|
|
|
|
|
Posted: 1/7/2023 12:23:50 PM EDT
[#50]
Quote Historyhmm, so S90V still reigns supreme 
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
