User Panel
User Panel
User Panel
SC, USA
|
Posted: 8/23/2019 9:54:48 PM EDT
[Last Edit: Brink89]
[#1]
Quote HistoryOriginally Posted By Sgt_Fish: Check your spelling on the lower, burt. Otherwise it looks awesome. |
|
|
|
Posted: 8/23/2019 10:07:07 PM EDT
[#2]
Quote HistoryOriginally Posted By Brink89:
I think I understand, if its rifled you have more options for lengths for under a OAL under 26" but smooth bore you MUST be over 26" planned on using virgin lowers. just finished my first build last week and now the bug has bitten hard. Quote HistoryOriginally Posted By Brink89:
Originally Posted By Naporter:
The measurement rules are for all braces, not just shotguns. They're just irrelevant on rifled pistols though unless you mount a VFG. Remember though, it must be built from a virgin receiver. If it starts life as a rifle, it's always a rifle regardless of removing the stock. Same goes for shotguns. As long as it's transferred properly (as "other") there's no way for them to actually prove it was built as a rifle first though. planned on using virgin lowers. just finished my first build last week and now the bug has bitten hard. |
|
|
|
|
Posted: 8/23/2019 10:22:30 PM EDT
[#3]
Quote HistoryOriginally Posted By Sgt_Fish:
Check your spelling on the lower, burt. Otherwise it looks awesome. Quote HistoryOriginally Posted By Sgt_Fish:
Originally Posted By BrickWurX:
For those asking about the JP lower, I took the Velociraptor fossil image and vectored it down to fit a 1.25” square. It had to be redrawn completely to work as a deep laser cut. It isn’t exact, the original has far more detail, but it is about as close as I can get and it still remain usable. Concerning the Lettering, yes that “style” has been around, but a style of lettering is different form a computer font someone worked on. The previously selected font used in your example has a copyright from 1991 and 2001, and is reserved. We cannot use that font, but, what I used for the serial and title should be close enough and probably OK. None of those fonts will work for the selector markings however, the letter type is too small (about a 7-8 font height when cut). I used a similar but solid font like in previous illustrations to fit that need. May still need to reduce the lettering, not sure. https://live.staticflickr.com/65535/48608659352_31e8007592_b.jpg Also, I fixed the lowers list.  Attached File |
|
|
|
|
Posted: 8/24/2019 12:07:48 AM EDT
[#4]
Quote HistoryOriginally Posted By BrickWurX:
https://www.AR15.Com/media/mediaFiles/240952/Burt_Shhhh_jpg-1065061.JPG 
|
|
|
|
|
Posted: 8/24/2019 7:46:19 AM EDT
[#5]
Quote HistoryOriginally Posted By Brink89:
@LoDie The Jurassic lower design was updated |
|
|
|
|
Posted: 8/24/2019 9:40:38 AM EDT
[#6]
Quote HistoryOriginally Posted By BrickWurX:
https://www.AR15.Com/media/mediaFiles/240952/Burt_Shhhh_jpg-1065061.JPG Quote HistoryOriginally Posted By BrickWurX:
Originally Posted By Sgt_Fish:
Originally Posted By BrickWurX:
For those asking about the JP lower, I took the Velociraptor fossil image and vectored it down to fit a 1.25” square. It had to be redrawn completely to work as a deep laser cut. It isn’t exact, the original has far more detail, but it is about as close as I can get and it still remain usable. Concerning the Lettering, yes that “style” has been around, but a style of lettering is different form a computer font someone worked on. The previously selected font used in your example has a copyright from 1991 and 2001, and is reserved. We cannot use that font, but, what I used for the serial and title should be close enough and probably OK. None of those fonts will work for the selector markings however, the letter type is too small (about a 7-8 font height when cut). I used a similar but solid font like in previous illustrations to fit that need. May still need to reduce the lettering, not sure. https://live.staticflickr.com/65535/48608659352_31e8007592_b.jpg Also, I fixed the lowers list. 
|
|
|
|
LA, USA
|
Posted: 8/24/2019 11:54:43 AM EDT
[#7]
Quote HistoryOriginally Posted By NOLAGT: Find me some 15 round ATI 410 mags now LOL. They are all sold out...slept on it again...work getting in my way lol. |
|
|
SC, USA
|
Posted: 8/24/2019 12:26:44 PM EDT
[#8]
Quote HistoryOriginally Posted By LoDie:
Awesome! Now to just wait on the preorder right? 
|
|
|
|
Posted: 8/24/2019 1:23:16 PM EDT
[#9]
Quote HistoryOriginally Posted By Brink89: Yup, probably this time next year It's not been selected for production, and unless there is a lot of interest, it won't be. |
|
|
|
|
Posted: 8/24/2019 1:28:36 PM EDT
[Last Edit: BrickWurX]
[#10]
Quote HistoryOriginally Posted By Brink89:
Yup, probably this time next year Quote HistoryOriginally Posted By Brink89:
Originally Posted By LoDie:
Awesome! Now to just wait on the preorder right? The design, markings, and often title/ serial can change at PSA's discretion. Josiah does a good job of keeping us in the loop as best as possible. But any lower selected will depend on actual sales projection viability. Just about every lower offered has eventually sold out, but some designs do much better than others. With PSA ramping up production, I could see them getting a little more selective (this is not verified, just my thoughts). The long game is to focus on maintaining strong interest, so new designs continue to populate. Edited- Cause dangit, beat by Sputnik with a shorter response. Blunt, but quicker. |
|
|
|
VA, USA
|
Posted: 8/24/2019 1:45:31 PM EDT
[#11]
Hey BrickWurx! If you aren't too busy and it isn't too much trouble, could we get a version of the VA lower with "Virtue-15" instead of "Virginia-15", and with "VA" as the serial prefix?
Thanks boss! You're the best
|
|
|
|
Posted: 8/24/2019 2:46:03 PM EDT
[#12]
|
|
|
|
SC, USA
|
Posted: 8/24/2019 3:10:48 PM EDT
[#13]
Quote HistoryOriginally Posted By BrickWurX: Negative, designs added to the "CONSIDERATION" list, have NOT been selected for production. PSA would need to actually select that design before it moved to the APPROVED list, then it would be placed in line for manufacturing. I try and work up designs of all sorts, be it from forum members, outside suggestions, or just stuff I think up. I do this for illustration purposes to best represent that idea to our forum members and to PSA. But it does not mean every design I illustrate will get made. PSA has the final say in anything selected. The design, markings, and often title/ serial can change at PSA's discretion. Josiah does a good job of keeping us in the loop as best as possible. But any lower selected will depend on actual sales projection viability. Just about every lower offered has eventually sold out, but some designs do much better than others. With PSA ramping up production, I could see them getting a little more selective (this is not verified, just my thoughts). The long game is to focus on maintaining strong interest, so new designs continue to populate. Edited- Cause dangit, beat by Sputnik with a shorter response. Blunt, but quicker. |
|
|
|
Posted: 8/24/2019 4:09:33 PM EDT
[#14]
YEET number 37 is home.
|
|
|
|
|
Posted: 8/24/2019 7:27:02 PM EDT
[#15]
Quote HistoryOriginally Posted By NOLAGT:
Well I just found my next upper, maybe for my space rider. This guy cut to about 12” and runs a brace...uses a 15 round mag from ATI...and you can thread it to take the ATI chokes....yep! https://i.redd.it/eme1e810zos21.jpg Quote HistoryOriginally Posted By NOLAGT:
Originally Posted By Pearljammer8: https://www.AR15.Com/media/mediaFiles/488754/PhotoEditor_20190822_163232265_jpg-1063601.JPG .410 ARU This guy cut to about 12” and runs a brace...uses a 15 round mag from ATI...and you can thread it to take the ATI chokes....yep! https://i.redd.it/eme1e810zos21.jpg .410 AR Non-NFA firearm build |
|
|
|
|
Posted: 8/24/2019 7:27:42 PM EDT
[#16]
Quote HistoryOriginally Posted By speedbuggy16v:
THIS! |
|
|
|
|
Posted: 8/24/2019 7:28:35 PM EDT
[Last Edit: Possumluke]
[#17]
In on 500?
Almost...
|
|
|
|
|
Posted: 8/24/2019 7:29:25 PM EDT
[#18]
Quote HistoryOriginally Posted By BrickWurX:
For those asking about the JP lower, I took the Velociraptor fossil image and vectored it down to fit a 1.25” square. It had to be redrawn completely to work as a deep laser cut. It isn’t exact, the original has far more detail, but it is about as close as I can get and it still remain usable. Concerning the Lettering, yes that “style” has been around, but a style of lettering is different form a computer font someone worked on. The previously selected font used in your example has a copyright from 1991 and 2001, and is reserved. We cannot use that font, but, what I used for the serial and title should be close enough and probably OK. None of those fonts will work for the selector markings however, the letter type is too small (about a 7-8 font height when cut). I used a similar but solid font like in previous illustrations to fit that need. May still need to reduce the lettering, not sure. https://live.staticflickr.com/65535/48608659352_31e8007592_b.jpg Also, I fixed the lowers list. |
|
|
|
|
Posted: 8/24/2019 7:30:14 PM EDT
[#19]
Quote HistoryOriginally Posted By SC4eyes:
It turned out looking much nicer, after assembly and a quick shower in Break Free. https://photos.smugmug.com/photos/i-SKGSnTh/0/fbc4d5f3/L/i-SKGSnTh-L.jpg |
|
|
|
|
Posted: 8/24/2019 7:33:51 PM EDT
[#20]
Quote HistoryOriginally Posted By TheTallest:
YEET number 37 is home. |
|
|
|
|
Posted: 8/24/2019 7:35:21 PM EDT
[#21]
Quote HistoryOriginally Posted By Possumluke:
In on 500? Almost... |
|
|
|
SC, USA
|
Posted: 8/24/2019 7:41:09 PM EDT
[Last Edit: Brink89]
[#22]
@GamecockOperator
I called PSA in Columbia (as it passed the 6-week mark for minuteman) they told me there was an issue in engraving and they had to remake a number of lowers. not sure if that includes yours. I was told another two weeks |
|
|
SC, USA
|
Posted: 8/24/2019 8:07:21 PM EDT
[#23]
Does PSA price match? As in can I get the MBUS set at my local PSA for the price online and save the shipping?
|
|
|
|
Posted: 8/24/2019 8:56:49 PM EDT
[#24]
Quote HistoryOriginally Posted By Brink89:
@GamecockOperator I called PSA in Columbia (as it passed the 6-week mark for minuteman) they told me there was an issue in engraving and they had to remake a number of lowers. not sure if that includes yours. I was told another two weeks thanks for the intel though brink, i appreciate it alot. |
|
|
|
|
Posted: 8/24/2019 8:57:40 PM EDT
[#25]
Quote HistoryOriginally Posted By Brink89:
Does PSA price match? As in can I get the MBUS set at my local PSA for the price online and save the shipping? the stores will not price match daily deals though. so there is that.. or anything that requires a "discount code" at checkout. |
|
|
|
SC, USA
|
Posted: 8/24/2019 9:22:02 PM EDT
[#26]
Also does anyone know how the “unconfirmed” list works? I haven’t been around long enough to see one go from there to “confirmed”. Does it go top down or does PSA pin one based on demand?
If the latter I’d be willing to make a poll list for lowers. I’ve got a lot of downtime at work 
|
|
|
|
Posted: 8/24/2019 9:29:01 PM EDT
[#27]
Quote HistoryOriginally Posted By Brink89:
Also does anyone know how the “unconfirmed” list works? I haven’t been around long enough to see one go from there to “confirmed”. Does it go top down or does PSA pin one based on demand? If the latter I’d be willing to make a poll list for lowers. I’ve got a lot of downtime at work |
|
|
|
SC, USA
|
Posted: 8/24/2019 9:35:25 PM EDT
[#28]
Quote HistoryOriginally Posted By dlshady: When Josiah and his brother decide one looks like a good seller he will pop in here and announce that it's the newest approved lower. To be honest though, I doubt they're paying a whole lot of attention to that list here lately because there are so many which have already been approved still waiting to be produced. As soon as one makes the approved list, someone will start pissing and moaning about "When's it going to get made? I've been waiting three days already!" so I doubt they're very worried about adding new stuff to the list right now. At least I sure wouldn't if I were in their shoes. |
|
|
|
Posted: 8/24/2019 9:43:12 PM EDT
[#29]
I'm hoping they jump the line with the M16A2 lower. Aero makes an M16A1 lower, but I'd much rather have an A2 marked.
|
|
|
|
|
Posted: 8/24/2019 9:44:11 PM EDT
[#30]
Quote HistoryOriginally Posted By Brink89:
I hear that the list currently has about 20 or so to be produced. Just had a thought that making a poll for the unconfirmed for people to vote on may help PSA gauge which ones would be in-demand. Quote HistoryOriginally Posted By Brink89:
Originally Posted By dlshady: When Josiah and his brother decide one looks like a good seller he will pop in here and announce that it's the newest approved lower. To be honest though, I doubt they're paying a whole lot of attention to that list here lately because there are so many which have already been approved still waiting to be produced. As soon as one makes the approved list, someone will start pissing and moaning about "When's it going to get made? I've been waiting three days already!" so I doubt they're very worried about adding new stuff to the list right now. At least I sure wouldn't if I were in their shoes. And to be perfectly honest, I suspect this whole limited edition lower shenanigans blew up to a level that no one at PSA ever saw coming, and I wouldn't doubt that it made them seriously re-evaluate their production capabilities. I'd be surprised if they didn't have to add a few lines and buy some additional machines just to keep up with the insane demand that a bunch of dorks like us created. It's been good for their business I have no doubt, and it's been great for us as well. We all owe Josiah and his brother a huge Thanks! for being willing to ever start this insanity in the first place. |
|
|
|
|
Posted: 8/24/2019 9:49:48 PM EDT
[#31]
Quote HistoryOriginally Posted By dlshady: I dunno, PM Josiah and see if he has any interest in you doing that for them. I know you have no interest in going back to read all 499 pages but there have been occasions where he popped in here and just asked if we would buy something if they were to produce it, and then there have been times when we kicked an idea around, Brickwurx put together an image and it was just so incredibly cool that PSA couldn't not make it. And to be perfectly honest, I suspect this whole limited edition lower shenanigans blew up to a level that no one at PSA ever saw coming, and I wouldn't doubt that it made them seriously re-evaluate their production capabilities. I'd be surprised if they didn't have to add a few lines and buy some additional machines just to keep up with the insane demand that a bunch of dorks like us created. It's been good for their business I have no doubt, and it's been great for us as well. We all owe Josiah and his brother a huge Thanks! for being willing to ever start this insanity in the first place. One problem with a pole is that it can't be updated with new items. So as soon as you start a pole it will be out of date after the next one is confirmed. Maybe start a pole using an external site and link it? Survey monkey or something? |
|
|
|
|
Posted: 8/24/2019 9:55:22 PM EDT
[#32]
Quote HistoryOriginally Posted By GamecockOperator:
man im getting a bit jealous, i havent heard anything for any of my lowers, the . yeets, the betsys, teh asalt, none no words nothing.. no replys nothing. Quote HistoryOriginally Posted By GamecockOperator:
Originally Posted By TheTallest:
YEET number 37 is home. |
|
|
|
SC, USA
|
Posted: 8/24/2019 10:16:24 PM EDT
[Last Edit: Brink89]
[#33]
Quote HistoryOriginally Posted By drfroglegs: That's the honest truth. One problem with a pole is that it can't be updated with new items. So as soon as you start a pole it will be out of date after the next one is confirmed. Maybe start a pole using an external site and link it? Survey monkey or something?  ) that I’m refinishing and the next two days off.
|
|
|
|
Posted: 8/24/2019 10:26:40 PM EDT
[Last Edit: drfroglegs]
[#34]
Quote HistoryOriginally Posted By Brink89: That was my plan. I was gonna look around see which service would allow me to modify as time progresses. Wouldn’t be able to do that till Wednesday probably I just got some surplus wood AK furniture ( ) that I’m refinishing and the next two days off.Went from this:  Attached FileGot a stock and handguard from someone on here on the C&R forum:  Attached FileTo this:  Attached FileBut yeah, I think a survey is a great idea. The VA lower seems really highly sought after and so does the M16A2 and the MAGA lowers. I'll probably buy each one of those. |
|
|
|
SC, USA
|
Posted: 8/24/2019 10:39:31 PM EDT
[#35]
Quote HistoryOriginally Posted By drfroglegs: Awesome! I just finished restoring a bubbafied 1903a3! Went from this: https://www.AR15.Com/media/mediaFiles/322543/20190723_165345_jpg-1066213.JPG Got a stock and handguard from someone on here on the C&R forum: https://www.AR15.Com/media/mediaFiles/322543/20190729_120252_jpg-1066220.JPG To this: https://www.AR15.Com/media/mediaFiles/322543/20190823_195305_jpg-1066214.JPG But yeah, I think a survey is a great idea. The VA lower seems really highly sought after and so does the M16A2 and the MAGA lowers. I'll probably buy each one of those. |
|
|
|
Posted: 8/24/2019 10:46:45 PM EDT
[#36]
Quote HistoryOriginally Posted By drfroglegs:
Awesome! I just finished restoring a bubbafied 1903a3! Went from this: https://www.AR15.Com/media/mediaFiles/322543/20190723_165345_jpg-1066213.JPG Got a stock and handguard from someone on here on the C&R forum: https://www.AR15.Com/media/mediaFiles/322543/20190729_120252_jpg-1066220.JPG To this: https://www.AR15.Com/media/mediaFiles/322543/20190823_195305_jpg-1066214.JPG But yeah, I think a survey is a great idea. The VA lower seems really highly sought after and so does the M16A2 and the MAGA lowers. I'll probably buy each one of those. Quote HistoryOriginally Posted By drfroglegs:
Originally Posted By Brink89: That was my plan. I was gonna look around see which service would allow me to modify as time progresses. Wouldn’t be able to do that till Wednesday probably I just got some surplus wood AK furniture ( ) that I’m refinishing and the next two days off.Went from this: https://www.AR15.Com/media/mediaFiles/322543/20190723_165345_jpg-1066213.JPG Got a stock and handguard from someone on here on the C&R forum: https://www.AR15.Com/media/mediaFiles/322543/20190729_120252_jpg-1066220.JPG To this: https://www.AR15.Com/media/mediaFiles/322543/20190823_195305_jpg-1066214.JPG But yeah, I think a survey is a great idea. The VA lower seems really highly sought after and so does the M16A2 and the MAGA lowers. I'll probably buy each one of those. |
|
|
|
|
Posted: 8/24/2019 10:49:50 PM EDT
[#37]
Quote HistoryOriginally Posted By TheTallest:
Did you try the industry forum? |
|
|
|
|
Posted: 8/24/2019 10:53:08 PM EDT
[#38]
Quote HistoryOriginally Posted By drfroglegs: Awesome! I just finished restoring a bubbafied 1903a3! Went from this: https://www.AR15.Com/media/mediaFiles/322543/20190723_165345_jpg-1066213.JPG Got a stock and handguard from someone on here on the C&R forum: https://www.AR15.Com/media/mediaFiles/322543/20190729_120252_jpg-1066220.JPG To this: https://www.AR15.Com/media/mediaFiles/322543/20190823_195305_jpg-1066214.JPG But yeah, I think a survey is a great idea. The VA lower seems really highly sought after and so does the M16A2 and the MAGA lowers. I'll probably buy each one of those. |
|
|
|
|
Posted: 8/24/2019 10:56:50 PM EDT
[#39]
Quote HistoryOriginally Posted By GamecockOperator: beautiful work, and a great save.. nicely done sir. nicely done. I owe a huge thanks to @HurstXJ he sold me the stock and most of the hardware at a great price. I just has to do the refinishing and find a few parts. It was a great project, I'm really glad I decided to take it on. |
|
|
|
|
Posted: 8/24/2019 11:03:10 PM EDT
[#40]
So, some guys have gotten their yeet lowers and then the flow stopped?
Interesting. |
|
|
|
|
Posted: 8/24/2019 11:08:51 PM EDT
[#41]
Quote HistoryOriginally Posted By sigking:
So, some guys have gotten their yeet lowers and then the flow stopped? Interesting. i did always think that local/ in store pickups should get first picks from production since its literlally right there. but what do i konw, im sure there is a good reason for thei rmadness! |
|
|
|
|
Posted: 8/24/2019 11:16:00 PM EDT
[#42]
Quote HistoryOriginally Posted By sigking:
So, some guys have gotten their yeet lowers and then the flow stopped? Interesting. Look at it this way... Other than quality control and inspection, I'd assume that annodizing is probably the last step these lowers go through before being ready to ship. I'm sure their annodizing tank can only process a given number of lowers at any given time, so let's assume that number is 500, or maybe even 1000. Would we want them to hold on to all of a given lower (Yeet Cannon) until every last one was finished an ready to ship, or would it be better to go ahead and send the finished ones to shipping so they can go ahead and get them processed and sent down the road? |
|
|
|
|
Posted: 8/24/2019 11:20:53 PM EDT
[#43]
Quote HistoryOriginally Posted By GamecockOperator:
apparetnly they have started shipping, but i dont know about the flow being stpped. i did always think that local/ in store pickups should get first picks from production since its literlally right there. but what do i konw, im sure there is a good reason for thei rmadness! Quote HistoryOriginally Posted By GamecockOperator:
Originally Posted By sigking:
So, some guys have gotten their yeet lowers and then the flow stopped? Interesting. i did always think that local/ in store pickups should get first picks from production since its literlally right there. but what do i konw, im sure there is a good reason for thei rmadness! |
|
|
|
GA, USA
|
Posted: 8/24/2019 11:22:14 PM EDT
[#44]
Should have my yeet in hand this week. Woke up this morning and got a broken email link telling me something was back in stock. Took a chance and sure enough the 8 inch 9 upper was in stock, so it’s on the way now too lol.
So we hit page 500, we get the announcement for the PSA 50? |
|
|
|
Posted: 8/24/2019 11:31:19 PM EDT
[#45]
Quote HistoryOriginally Posted By dlshady: Just from what I've been able to ascertain from reading the thread (and knowing a little about how production works) this stuff is made in batches, so when they receive a batch from production they'll fill as many orders as they can and then they'll wait until the next batch arrives. I know several guys were talking about receiving tracking numbers for their Yeet Cannons while mine still showed "processing", and those guys already have theirs in hand while mine is sitting in a UPS terminal somewhere between Columbia and Alabama. Look at it this way... Other than quality control and inspection, I'd assume that annodizing is probably the last step these lowers go through before being ready to ship. I'm sure their annodizing tank can only process a given number of lowers at any given time, so let's assume that number is 500, or maybe even 1000. Would we want them to hold on to all of a given lower (Yeet Cannon) until every last one was finished an ready to ship, or would it be better to go ahead and send the finished ones to shipping so they can go ahead and get them processed and sent down the road? i think it would be best to ship them all once they are all done, not piece meal... as it causes more issues than it fixes. |
|
|
|
|
Posted: 8/24/2019 11:33:52 PM EDT
[#46]
Quote HistoryOriginally Posted By dlshady: I assume it has a lot to do with maintaining a chain of custody for the ATF, being that they're serial numbered and can obviously take down the International Space Station if allowed to get into the wrong hands. It's probably not as simple as throwing the new hire Cletus a box of lowers and asking him to run them over to the store on Main Street. But yeah, if I lived next door to a PSA store and some jackwagon in Montana posted pics of his lower that he ordered the same day as me while I was still empty handed, I'd probably be a little bit less than thrilled. |
|
|
|
|
Posted: 8/24/2019 11:39:16 PM EDT
[#47]
Quote HistoryOriginally Posted By sgahunter:
Should have my yeet in hand this week. Woke up this morning and got a broken email link telling me something was back in stock. Took a chance and sure enough the 8 inch 9 upper was in stock, so it’s on the way now too lol. So we hit page 500, we get the announcement for the PSA 50? sounds like it should be a neat build. not on 500 . yet.. |
|
|
|
|
Posted: 8/24/2019 11:40:17 PM EDT
[#48]
Had out my Approval 15 lower earlier, still don't know what to do with it.
|
|
|
|
|
Posted: 8/24/2019 11:43:18 PM EDT
[#49]
Quote HistoryOriginally Posted By DCV_117:
Had out my Approval 15 lower earlier, still don't know what to do with it. |
|
|
|
|
Posted: 8/24/2019 11:43:58 PM EDT
[#50]
Quote HistoryOriginally Posted By GamecockOperator:
im not going to build any of the meme lowers most likely. may make a neat shadow box table or something for displaying them all though. Quote HistoryOriginally Posted By GamecockOperator:
Originally Posted By DCV_117:
Had out my Approval 15 lower earlier, still don't know what to do with it. |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
