User Panel
The nine most terrifying words in the English language are, 'I'm from the government and I'm here to help.' - Ronald Reagan
|
great thread a few buddies of mine have been thinking about these cans
|
|
|
Sportsman's Guide now has the filler spouts for the large-mouth NATO jerry cans in stock. LINK
Limited quantity, so grab em' if you need em'. |
|
The nine most terrifying words in the English language are, 'I'm from the government and I'm here to help.' - Ronald Reagan
|
CRAP!
Another plastic can just split a seam!! Tired of this cheap plastic crap! Who has the best quality can for daily use? |
|
|
Originally Posted By BUCK1911:
CRAP! Another plastic can just split a seam!! Tired of this cheap plastic crap! Who has the best quality can for daily use? View Quote This thread is old enough to have to enroll in school and you still bought walmart gas cans??? What you doin? Feedin' a weed whacker is a bit different than feeding a 100kw generator. One uses a pint an hour the other will easily need more than 50 gallons an hour. For little stuff like camp stoves, weed eater, and mower the 5 liter NATO can has been my favorite. Old Grouch Surplus may still have some surplus 5L cans. For autos the 20L NATO can works well |
|
Asking for opinions on the internet and then getting upset for getting them is like stirring up a hornets' nest and then getting pissed because you got stung.
Halffast: post 1725 |
Originally Posted By PA22-400:
This thread is old enough to have to enroll in school and you still bought walmart gas cans??? What you doin? Feedin' a weed whacker is a bit different than feeding a 100kw generator. One uses a pint an hour the other will easily need more than 50 gallons an hour. For little stuff like camp stoves, weed eater, and mower the 5 liter NATO can has been my favorite. Old Grouch Surplus may still have some surplus 5L cans. For autos the 20L NATO can works well View Quote View All Quotes View All Quotes Originally Posted By PA22-400:
Originally Posted By BUCK1911:
CRAP! Another plastic can just split a seam!! Tired of this cheap plastic crap! Who has the best quality can for daily use? This thread is old enough to have to enroll in school and you still bought walmart gas cans??? What you doin? Feedin' a weed whacker is a bit different than feeding a 100kw generator. One uses a pint an hour the other will easily need more than 50 gallons an hour. For little stuff like camp stoves, weed eater, and mower the 5 liter NATO can has been my favorite. Old Grouch Surplus may still have some surplus 5L cans. For autos the 20L NATO can works well They are old cans and feed different equipment gas and diesel. I have gone cheap because the get stolen to often but I can just lock up a metal can. |
|
|
Originally Posted By BUCK1911:
CRAP! Another plastic can just split a seam!! Tired of this cheap plastic crap! Who has the best quality can for daily use? View Quote For day to day small engine uses (snow blower, lawn mower ect) I prefer the smaller 2.5gal cans. They are just easier to manipulate when dispensing small amounts of fuel. I personally have a preban classic red plastic can for this that works fine however I have been considering one of the little 10L NATO cans or even clean up a 10L MFC. Its hard to justify buying a 10L NATO or MFC though when my preban can is doing the job perfectly and has been for a decade. |
|
There are hundreds of reasons to own a gun but it’s mostly the reasons I can't think of that make me glad to have them.
|
10% OFF all Jerry cans & accessories at Roverparts.com, good through Monday, 4/20. Go to Off Road Accessories.
|
|
A nation which can prefer disgrace to danger is prepared for a master, and deserves one.
- Alexander Hamilton |
|
Originally Posted By BUCK1911:
Are these the BEST can? Posted Via AR15.Com Mobile View Quote View All Quotes View All Quotes Originally Posted By BUCK1911:
Originally Posted By TigerForce:
10% OFF all Jerry cans & accessories at Roverparts.com, good through Monday, 4/20. Go to Off Road Accessories. Are these the BEST can? Posted Via AR15.Com Mobile That's a tough question and differs for everybody I think. We have metal NATO, metal commercial, and the thick walled military Scepter cans. If I had to go with just one type, the military HDPE Scepter cans [NOT the recent Scepter thin plastic Sheeple cans] would be my preference for several reasons. We've found both most any metal and the .mil Scepter cans store gasoline well long term, if cared for and maintained correctly. Metal ones will dent, scratch visibly and rust, inside and out, so that's why we [and NATO perhaps] prefer the plastic Scepter cans. The .mil Scepter cans will set you back about $65 each, typically for nice used ones on eBay. New, figure $100. The prices are all over for metal NATO cans, and retailers USED to have and may still have, good quality commercial metal cans [those with a screw in metal cap]. We have some metal Harbor Freight cans from years ago that are still in fine condx. I've typically paid from $40 to $64 for commercial metal cans over the more recent years, so compare that to the cost of a NEW .mil Scepter can, and the premium isn't so bad for a far better can. I don't like the metal commercial cans with the new plastic cap that are now commonly found, although we bought some in the past 4 years or so and they work OK. Usually use them for diesel and not gasoline. There's replacement caps for them on eBay for too much $ As far as the Walmart type plastic gas cans [and the newer Scepter thin plastic Sheeple cans], -they're OK for short term storage for lawnmowers, saws, and stuff, I have a couple but don't use them much anymore for more 'important' stuff like gennys and machinery. I'd generally steer clear of metal cans made in China, altho I'm sure there's some that will work fine. |
|
I see us collectively as a country bumpkin, sitting on a log with a rifle, having no understanding what's going on beyond a few trees away, about to be enslaved with no interest by whom or what.
|
Old Grouch Surplus and Atlantic British are very very well trusted vendors.
Best??? Best is as best does... By your own words: Best used to be disposable...Or at least cheap enough that you did not feel too bad when the can was stolen. Now you appear to be changing lanes, so you appear to define best as...does not break. Again I ask you. What are you going to do with your gas can? Until you tell us clearly what you need a fuel can to do we cannot make a clear "best" suggestion. Originally Posted By BUCK1911:
Are these the BEST can? Posted Via AR15.Com Mobile View Quote View All Quotes View All Quotes Originally Posted By BUCK1911:
Originally Posted By TigerForce:
10% OFF all Jerry cans & accessories at Roverparts.com, good through Monday, 4/20. Go to Off Road Accessories. Are these the BEST can? Posted Via AR15.Com Mobile Originally Posted By BUCK1911:
Originally Posted By PA22-400:
Originally Posted By BUCK1911:
CRAP! Another plastic can just split a seam!! Tired of this cheap plastic crap! Who has the best quality can for daily use? This thread is old enough to have to enroll in school and you still bought walmart gas cans??? They are old cans and feed different equipment gas and diesel. I have gone cheap because the get stolen to often but I can just lock up a metal can. |
|
Asking for opinions on the internet and then getting upset for getting them is like stirring up a hornets' nest and then getting pissed because you got stung.
Halffast: post 1725 |
Originally Posted By EXPY37:
That's a tough question and differs for everybody I think. We have metal NATO, metal commercial, and the thick walled military Scepter cans. If I had to go with just one type, the military HDPE Scepter cans [NOT the recent Scepter thin plastic Sheeple cans] would be my preference for several reasons. We've found both most any metal and the .mil Scepter cans store gasoline well long term, if cared for and maintained correctly. Metal ones will dent, scratch visibly and rust, inside and out, so that's why we [and NATO perhaps] prefer the plastic Scepter cans. The .mil Scepter cans will set you back about $65 each, typically for nice used ones on eBay. New, figure $100. The prices are all over for metal NATO cans, and retailers USED to have and may still have, good quality commercial metal cans [those with a screw in metal cap]. We have some metal Harbor Freight cans from years ago that are still in fine condx. I've typically paid from $40 to $64 for commercial metal cans over the more recent years, so compare that to the cost of a NEW .mil Scepter can, and the premium isn't so bad for a far better can. I don't like the metal commercial cans with the new plastic cap that are now commonly found, although we bought some in the past 4 years or so and they work OK. Usually use them for diesel and not gasoline. There's replacement caps for them on eBay for too much $ As far as the Walmart type plastic gas cans [and the newer Scepter thin plastic Sheeple cans], -they're OK for short term storage for lawnmowers, saws, and stuff, I have a couple but don't use them much anymore for more 'important' stuff like gennys and machinery. I'd generally steer clear of metal cans made in China, altho I'm sure there's some that will work fine. View Quote View All Quotes View All Quotes Originally Posted By EXPY37:
Originally Posted By BUCK1911:
Originally Posted By TigerForce:
10% OFF all Jerry cans & accessories at Roverparts.com, good through Monday, 4/20. Go to Off Road Accessories. Are these the BEST can? Posted Via AR15.Com Mobile That's a tough question and differs for everybody I think. We have metal NATO, metal commercial, and the thick walled military Scepter cans. If I had to go with just one type, the military HDPE Scepter cans [NOT the recent Scepter thin plastic Sheeple cans] would be my preference for several reasons. We've found both most any metal and the .mil Scepter cans store gasoline well long term, if cared for and maintained correctly. Metal ones will dent, scratch visibly and rust, inside and out, so that's why we [and NATO perhaps] prefer the plastic Scepter cans. The .mil Scepter cans will set you back about $65 each, typically for nice used ones on eBay. New, figure $100. The prices are all over for metal NATO cans, and retailers USED to have and may still have, good quality commercial metal cans [those with a screw in metal cap]. We have some metal Harbor Freight cans from years ago that are still in fine condx. I've typically paid from $40 to $64 for commercial metal cans over the more recent years, so compare that to the cost of a NEW .mil Scepter can, and the premium isn't so bad for a far better can. I don't like the metal commercial cans with the new plastic cap that are now commonly found, although we bought some in the past 4 years or so and they work OK. Usually use them for diesel and not gasoline. There's replacement caps for them on eBay for too much $ As far as the Walmart type plastic gas cans [and the newer Scepter thin plastic Sheeple cans], -they're OK for short term storage for lawnmowers, saws, and stuff, I have a couple but don't use them much anymore for more 'important' stuff like gennys and machinery. I'd generally steer clear of metal cans made in China, altho I'm sure there's some that will work fine. These? |
|
|
User spuddicus has used Scepter MFCs for$25/ea. They have varying degrees of paint on them but clean up well. I have a technique for cleaning them up if you want it. Any MFC purchase should also include new gaskets from a reputable source. Cap flange replacements are too big for a pita to not replace them.
|
|
There are hundreds of reasons to own a gun but it’s mostly the reasons I can't think of that make me glad to have them.
|
Double tap
|
|
There are hundreds of reasons to own a gun but it’s mostly the reasons I can't think of that make me glad to have them.
|
Originally Posted By BUCK1911:
Originally Posted By EXPY37:
Originally Posted By BUCK1911:
Originally Posted By TigerForce:
10% OFF all Jerry cans & accessories at Roverparts.com, good through Monday, 4/20. Go to Off Road Accessories. Are these the BEST can? Posted Via AR15.Com Mobile . That's a tough question and differs for everybody I think. We have metal NATO, metal commercial, and the thick walled military Scepter cans. If I had to go with just one type, the military HDPE Scepter cans [NOT the recent Scepter thin plastic Sheeple cans] would be my preference for several reasons. We've found both most any metal and the .mil Scepter cans store gasoline well long term, if cared for and maintained correctly. Metal ones will dent, scratch visibly and rust, inside and out, so that's why we [and NATO perhaps] prefer the plastic Scepter cans. The .mil Scepter cans will set you back about $65 each, typically for nice used ones on eBay. New, figure $100. The prices are all over for metal NATO cans, and retailers USED to have and may still have, good quality commercial metal cans [those with a screw in metal cap]. We have some metal Harbor Freight cans from years ago that are still in fine condx. I've typically paid from $40 to $64 for commercial metal cans over the more recent years, so compare that to the cost of a NEW .mil Scepter can, and the premium isn't so bad for a far better can. I don't like the metal commercial cans with the new plastic cap that are now commonly found, although we bought some in the past 4 years or so and they work OK. Usually use them for diesel and not gasoline. There's replacement caps for them on eBay for too much $ As far as the Walmart type plastic gas cans [and the newer Scepter thin plastic Sheeple cans], -they're OK for short term storage for lawnmowers, saws, and stuff, I have a couple but don't use them much anymore for more 'important' stuff like gennys and machinery. I'd generally steer clear of metal cans made in China, altho I'm sure there's some that will work fine. These? That is a MWC water can. Not made for fuel. Doesn't mean that you can't use it. But proceed at your own risk |
|
There are hundreds of reasons to own a gun but it’s mostly the reasons I can't think of that make me glad to have them.
|
Originally Posted By BUCK1911:
Originally Posted By EXPY37:
Originally Posted By BUCK1911:
Originally Posted By TigerForce:
10% OFF all Jerry cans & accessories at Roverparts.com, good through Monday, 4/20. Go to Off Road Accessories. Are these the BEST can? Posted Via AR15.Com Mobile That's a tough question and differs for everybody I think. We have metal NATO, metal commercial, and the thick walled military Scepter cans. If I had to go with just one type, the military HDPE Scepter cans [NOT the recent Scepter thin plastic Sheeple cans] would be my preference for several reasons. We've found both most any metal and the .mil Scepter cans store gasoline well long term, if cared for and maintained correctly. Metal ones will dent, scratch visibly and rust, inside and out, so that's why we [and NATO perhaps] prefer the plastic Scepter cans. The .mil Scepter cans will set you back about $65 each, typically for nice used ones on eBay. New, figure $100. The prices are all over for metal NATO cans, and retailers USED to have and may still have, good quality commercial metal cans [those with a screw in metal cap]. We have some metal Harbor Freight cans from years ago that are still in fine condx. I've typically paid from $40 to $64 for commercial metal cans over the more recent years, so compare that to the cost of a NEW .mil Scepter can, and the premium isn't so bad for a far better can. I don't like the metal commercial cans with the new plastic cap that are now commonly found, although we bought some in the past 4 years or so and they work OK. Usually use them for diesel and not gasoline. There's replacement caps for them on eBay for too much $ As far as the Walmart type plastic gas cans [and the newer Scepter thin plastic Sheeple cans], -they're OK for short term storage for lawnmowers, saws, and stuff, I have a couple but don't use them much anymore for more 'important' stuff like gennys and machinery. I'd generally steer clear of metal cans made in China, altho I'm sure there's some that will work fine. These? Those are water cans... Some have used them for fuel, but not worth the hassle for a couple cans. |
|
I see us collectively as a country bumpkin, sitting on a log with a rifle, having no understanding what's going on beyond a few trees away, about to be enslaved with no interest by whom or what.
|
Originally Posted By BUCK1911:
Are these the BEST can? Posted Via AR15.Com Mobile View Quote View All Quotes View All Quotes Originally Posted By BUCK1911:
Originally Posted By TigerForce:
10% OFF all Jerry cans & accessories at Roverparts.com, good through Monday, 4/20. Go to Off Road Accessories. Are these the BEST can? Posted Via AR15.Com Mobile They are good cans. I ordered gasket seals from them for the cans. They were sent to me under the wrong name. When I sent them back via UPS they told me they had to charge me a 20% restocking fee. I told them I sent them back because it was not in my name. They were assholes about it. I wont do business with them again. They fraked up and then fraked me for their frak up. Take your chances with them. Dave Furiani was the guy I dealt with. I bought over 30 cans from them, I just wanted back up gaskets. It was a pain in the butt. |
|
|
Originally Posted By BurntEnds:
They are good cans. I ordered gasket seals from them for the cans. They were sent to me under the wrong name. When I sent them back via UPS they told me they had to charge me a 20% restocking fee. I told them I sent them back because it was not in my name. They were assholes about it. I wont do business with them again. They fraked up and then fraked me for their frak up. Take your chances with them. Dave Furiani was the guy I dealt with. I bought over 30 cans from them, I just wanted back up gaskets. It was a pain in the butt. View Quote View All Quotes View All Quotes Originally Posted By BurntEnds:
Originally Posted By BUCK1911:
Originally Posted By TigerForce:
10% OFF all Jerry cans & accessories at Roverparts.com, good through Monday, 4/20. Go to Off Road Accessories. Are these the BEST can? Posted Via AR15.Com Mobile They are good cans. I ordered gasket seals from them for the cans. They were sent to me under the wrong name. When I sent them back via UPS they told me they had to charge me a 20% restocking fee. I told them I sent them back because it was not in my name. They were assholes about it. I wont do business with them again. They fraked up and then fraked me for their frak up. Take your chances with them. Dave Furiani was the guy I dealt with. I bought over 30 cans from them, I just wanted back up gaskets. It was a pain in the butt. I'm a bit confused - was the only problem the name on the address line? Right price, right item? |
|
"As God is my witness, I thought turkeys could fly." A. Carlson
|
Wrong name on the box. I did not open it as it was not addressed to me. I had to drive 45min to a FedEx store to return it.
|
|
|
|
If you live near a military base, you can usually find scepters on craigslist. Or in the local surplus stores you can sometimes get lucky and find them.
I bought I don't know how many of those cans in various conditions, my 'surplus' pile is down to cans with broken pieces. Missing gaskets, or have busted rings on the flanges. I was lucky enough to find a few boxes of new replacement parts at a scrap metal buyer / surplus store for a good price, all of the cans I use have new parts on them. I ran out of the gaskets and flanges though that was a sad day. |
|
|
Are you guys filling your 20l jato cans with a full 5 gallons of gas? I forgot what I did my last rotation which seemed to work fine and filled them with exactly 5 gallons. I am now worried about expansion given my grage gets over 100 degrees.
|
|
So you are saying God hates these endangered ducks?
No, I am just saying that if God liked ducks they wouldn't be endangered. |
I fill mine to the bottom of the spout neck, and have had no issues here. Also gets to 95+ degrees. The fill amount is slightly more than 5 gallons, if I recall correctly, 5.3.
|
|
|
Originally Posted By Dace:
Are you guys filling your 20l jato cans with a full 5 gallons of gas? I forgot what I did my last rotation which seemed to work fine and filled them with exactly 5 gallons. I am now worried about expansion given my grage gets over 100 degrees. View Quote Expansion is a natural phenomena of the vapor pressure of gasoline, and since you are seeing healthy expansion, that means the important volatile fractions with higher vapor pressures, haven't been lost from your fuel. Also that you have a good seal. If they don't expand, time to start troubleshooting. How full you fill the cans isn't relevant as long as they aren't COMPLETLEY filled up [since gasoline isn't compressible and if absolutely full and expanded, seams might burst] Some folks make the mistake of releasing the vapors when gas cans expand, and that's a horrible mistake. So pour gas in them whatever you want, don't worry abt how much and seal them GOOD. That's CRITICAL. The stuff will probably last longer than both of us. |
|
I see us collectively as a country bumpkin, sitting on a log with a rifle, having no understanding what's going on beyond a few trees away, about to be enslaved with no interest by whom or what.
|
I've seen some scepters that were damn near impossible to open when it got hot out. eBay has some wrenches that people have made that take care of the leverage needed to open, I'd never use it to wrench them closed though as you'd put a lot of unnecessary pressure on the gaskets and flanges inside them.
Those are the most common point of failure in the mfcs. If they made those flanges out of metal, I thing the mfc would be close to perfect. |
|
|
I may have asked before, but does anyone have a source for the older metal Blitz style cans? I already have about 4 of them and would prefer to stick to one style. Alternately, anyone want to trade even up for NATO cans?
|
|
"As God is my witness, I thought turkeys could fly." A. Carlson
|
I can draw and explain in detail how an engine works, but can't do calculus to save my life.
|
Originally Posted By ShotTherapy_JR:
Did I score? http://i.imgur.com/GrrYObS.jpg Says something like 20-5-74 on the bottom along with USMC View Quote They are the type I'm looking for. BTW, I think the USMC is a maker's mark, not Marine Corps. |
|
"As God is my witness, I thought turkeys could fly." A. Carlson
|
Originally Posted By R2point0: I may have asked before, but does anyone have a source for the older metal Blitz style cans? I already have about 4 of them and would prefer to stick to one style. Alternately, anyone want to trade even up for NATO cans? View Quote You know the can you like, others will figure they are getting rid of an old can. |
|
DK-Prof quote
Please do not engage in personal attacks, even if they are correct. |
Originally Posted By biere:
I think this is where asking about trades in the ee and as a last resort even craigslist might work for you. You know the can you like, others will figure they are getting rid of an old can. View Quote View All Quotes View All Quotes Originally Posted By biere:
Originally Posted By R2point0:
I may have asked before, but does anyone have a source for the older metal Blitz style cans? I already have about 4 of them and would prefer to stick to one style. Alternately, anyone want to trade even up for NATO cans? You know the can you like, others will figure they are getting rid of an old can. Craigslist has a few, alternating between junk and "GENUINE MARINE CORP USMC SEMPER FI JERRY CAN VIETNAM" etc. for $100. |
|
"As God is my witness, I thought turkeys could fly." A. Carlson
|
Originally Posted By R2point0:
Craigslist has a few, alternating between junk and "GENUINE MARINE CORP USMC SEMPER FI JERRY CAN VIETNAM" etc. for $100. View Quote View All Quotes View All Quotes Originally Posted By R2point0:
Originally Posted By biere:
Originally Posted By R2point0:
I may have asked before, but does anyone have a source for the older metal Blitz style cans? I already have about 4 of them and would prefer to stick to one style. Alternately, anyone want to trade even up for NATO cans? You know the can you like, others will figure they are getting rid of an old can. Craigslist has a few, alternating between junk and "GENUINE MARINE CORP USMC SEMPER FI JERRY CAN VIETNAM" etc. for $100. Do you have any swap meets in your area? Could've gotten 4 for $70 from different vendors here |
|
I can draw and explain in detail how an engine works, but can't do calculus to save my life.
|
USMC = US Metal Can
Or something like that Renamed Blitz can company later Dammit Capy...That could get confusing. Originally Posted By R2point0:
They are the type I'm looking for. BTW, I think the USMC is a maker's mark, not Marine Corps. View Quote View All Quotes View All Quotes Originally Posted By R2point0:
Originally Posted By ShotTherapy_JR:
Did I score? http://i.imgur.com/GrrYObS.jpg Says something like 20-5-74 on the bottom along with USMC They are the type I'm looking for. BTW, I think the USMC is a maker's mark, not Marine Corps. |
|
Asking for opinions on the internet and then getting upset for getting them is like stirring up a hornets' nest and then getting pissed because you got stung.
Halffast: post 1725 |
Originally Posted By ShotTherapy_JR:
Do you have any swap meets in your area? Could've gotten 4 for $70 from different vendors here View Quote View All Quotes View All Quotes Originally Posted By ShotTherapy_JR:
Originally Posted By R2point0:
Originally Posted By biere:
Originally Posted By R2point0:
I may have asked before, but does anyone have a source for the older metal Blitz style cans? I already have about 4 of them and would prefer to stick to one style. Alternately, anyone want to trade even up for NATO cans? You know the can you like, others will figure they are getting rid of an old can. Craigslist has a few, alternating between junk and "GENUINE MARINE CORP USMC SEMPER FI JERRY CAN VIETNAM" etc. for $100. Do you have any swap meets in your area? Could've gotten 4 for $70 from different vendors here Dad keeps an eye out for them at the Leesport swap meet in PA. Around my place the used market is Craigslist and yard sales. |
|
"As God is my witness, I thought turkeys could fly." A. Carlson
|
Originally Posted By airman100:
Been meaning to post my rehab project from the winter, finally got around to it.. Original condition of cans: http://www.ar15.com/media/viewFile.html?i=76339 http://www.ar15.com/media/viewFile.html?i=76340 Wire wheeled, sanded, ready for body coat with Rustoleum Regal Red: http://www.ar15.com/media/viewFile.html?i=76341 Caps were worked patiently with Naval Jelly. Lots and lots of applications, then clear coated. http://www.ar15.com/media/viewFile.html?i=76342 http://www.ar15.com/media/viewFile.html?i=76343 finally, split vinyl tubing around the bottom seam to keep them from rusting/marking on concrete: http://www.ar15.com/media/viewFile.html?i=76344 http://www.ar15.com/media/viewFile.html?i=76345 View Quote Very nice! I'm impressed! What was the original condition of the inside? Do anything to fix the inside? |
|
There are hundreds of reasons to own a gun but it’s mostly the reasons I can't think of that make me glad to have them.
|
Does anybody know if someone makes a metal flange replacement part for the Scepter MFCs?
The flange is the weak link. If it was metal the MFC would be perfect. |
|
There are hundreds of reasons to own a gun but it’s mostly the reasons I can't think of that make me glad to have them.
|
Originally Posted By LTCetme:
Does anybody know if someone makes a metal flange replacement part for the Scepter MFCs? The flange is the weak link. If it was metal the MFC would be perfect. View Quote In our experience, the flange fails primarily when gasoline is used with NON-Viton gaskets. Otherwise, no issues for us over many years and diesel and gasoline storage and use. Except to my knowledge, in a particular case posted here where the flange failed likely due to an out of spec gasket, not supplied by Specter. The actual cause IIRC, was never determined for lack of info from the poster. |
|
I see us collectively as a country bumpkin, sitting on a log with a rifle, having no understanding what's going on beyond a few trees away, about to be enslaved with no interest by whom or what.
|
Originally Posted By LTCetme:
Very nice! I'm impressed! What was the original condition of the inside? Do anything to fix the inside? View Quote View All Quotes View All Quotes Originally Posted By LTCetme:
Originally Posted By airman100:
Been meaning to post my rehab project from the winter, finally got around to it.. Original condition of cans: http://www.ar15.com/media/viewFile.html?i=76339 http://www.ar15.com/media/viewFile.html?i=76340 Wire wheeled, sanded, ready for body coat with Rustoleum Regal Red: http://www.ar15.com/media/viewFile.html?i=76341 Caps were worked patiently with Naval Jelly. Lots and lots of applications, then clear coated. http://www.ar15.com/media/viewFile.html?i=76342 http://www.ar15.com/media/viewFile.html?i=76343 finally, split vinyl tubing around the bottom seam to keep them from rusting/marking on concrete: http://www.ar15.com/media/viewFile.html?i=76344 http://www.ar15.com/media/viewFile.html?i=76345 Very nice! I'm impressed! What was the original condition of the inside? Do anything to fix the inside? Thankfully, the insides were a little light on coating, but in really good shape, apparently from having been shut tightly for all these years. Can dates were 1973-1974. I cut new gaskets for the caps out of sheet stock from McMaster-Carr with a circle-cutting jig. |
|
It takes away some of the visual impact when you can't see it.
|
Originally Posted By airman100:
Thankfully, the insides were a little light on coating, but in really good shape, apparently from having been shut tightly for all these years. Can dates were 1973-1974. I cut new gaskets for the caps out of sheet stock from McMaster-Carr with a circle-cutting jig. View Quote View All Quotes View All Quotes Originally Posted By airman100:
Originally Posted By LTCetme:
Originally Posted By airman100:
Been meaning to post my rehab project from the winter, finally got around to it.. Original condition of cans: http://www.ar15.com/media/viewFile.html?i=76339 http://www.ar15.com/media/viewFile.html?i=76340 Wire wheeled, sanded, ready for body coat with Rustoleum Regal Red: http://www.ar15.com/media/viewFile.html?i=76341 Caps were worked patiently with Naval Jelly. Lots and lots of applications, then clear coated. http://www.ar15.com/media/viewFile.html?i=76342 http://www.ar15.com/media/viewFile.html?i=76343 finally, split vinyl tubing around the bottom seam to keep them from rusting/marking on concrete: http://www.ar15.com/media/viewFile.html?i=76344 http://www.ar15.com/media/viewFile.html?i=76345 Very nice! I'm impressed! What was the original condition of the inside? Do anything to fix the inside? Thankfully, the insides were a little light on coating, but in really good shape, apparently from having been shut tightly for all these years. Can dates were 1973-1974. I cut new gaskets for the caps out of sheet stock from McMaster-Carr with a circle-cutting jig. Circle cutting jig??? More info? |
|
I see us collectively as a country bumpkin, sitting on a log with a rifle, having no understanding what's going on beyond a few trees away, about to be enslaved with no interest by whom or what.
|
Does anyone make a replacement cap/nozzle for the POS that comes on these cans from Harbor Freight? They are driving me crazy.
|
|
|
Originally Posted By EXPY37:
Circle cutting jig??? More info? View Quote View All Quotes View All Quotes Originally Posted By EXPY37:
Originally Posted By airman100:
Originally Posted By LTCetme:
Originally Posted By airman100:
Been meaning to post my rehab project from the winter, finally got around to it.. Original condition of cans: http://www.ar15.com/media/viewFile.html?i=76339 http://www.ar15.com/media/viewFile.html?i=76340 Wire wheeled, sanded, ready for body coat with Rustoleum Regal Red: http://www.ar15.com/media/viewFile.html?i=76341 Caps were worked patiently with Naval Jelly. Lots and lots of applications, then clear coated. http://www.ar15.com/media/viewFile.html?i=76342 http://www.ar15.com/media/viewFile.html?i=76343 finally, split vinyl tubing around the bottom seam to keep them from rusting/marking on concrete: http://www.ar15.com/media/viewFile.html?i=76344 http://www.ar15.com/media/viewFile.html?i=76345 Very nice! I'm impressed! What was the original condition of the inside? Do anything to fix the inside? Thankfully, the insides were a little light on coating, but in really good shape, apparently from having been shut tightly for all these years. Can dates were 1973-1974. I cut new gaskets for the caps out of sheet stock from McMaster-Carr with a circle-cutting jig. Circle cutting jig??? More info? I can't remember which circle cutter I used, but i'm thinking I used my cheap one: OLFA CMP-3 Go slow on a self-healing mat, cut the outside dia first, and don't try to cut very deep at one pass- just gradually deeper through the gasket sheet. You'll get a decent edge on the gasket if you don't force the cutter. it may have been this one though, I don't use it very much: McMaster-Carr 36795A11 |
|
It takes away some of the visual impact when you can't see it.
|
Originally Posted By airman100:
I can't remember which circle cutter I used, but i'm thinking I used my cheap one: OLFA CMP-3 Go slow on a self-healing mat, cut the outside dia first, and don't try to cut very deep at one pass- just gradually deeper through the gasket sheet. You'll get a decent edge on the gasket if you don't force the cutter. it may have been this one though, I don't use it very much: McMaster-Carr 36795A11 View Quote View All Quotes View All Quotes Originally Posted By airman100:
Originally Posted By EXPY37:
Originally Posted By airman100:
Originally Posted By LTCetme:
Originally Posted By airman100:
Been meaning to post my rehab project from the winter, finally got around to it.. Original condition of cans: http://www.ar15.com/media/viewFile.html?i=76339 http://www.ar15.com/media/viewFile.html?i=76340 Wire wheeled, sanded, ready for body coat with Rustoleum Regal Red: http://www.ar15.com/media/viewFile.html?i=76341 Caps were worked patiently with Naval Jelly. Lots and lots of applications, then clear coated. http://www.ar15.com/media/viewFile.html?i=76342 http://www.ar15.com/media/viewFile.html?i=76343 finally, split vinyl tubing around the bottom seam to keep them from rusting/marking on concrete: http://www.ar15.com/media/viewFile.html?i=76344 http://www.ar15.com/media/viewFile.html?i=76345 Very nice! I'm impressed! What was the original condition of the inside? Do anything to fix the inside? Thankfully, the insides were a little light on coating, but in really good shape, apparently from having been shut tightly for all these years. Can dates were 1973-1974. I cut new gaskets for the caps out of sheet stock from McMaster-Carr with a circle-cutting jig. Circle cutting jig??? More info? I can't remember which circle cutter I used, but i'm thinking I used my cheap one: OLFA CMP-3 Go slow on a self-healing mat, cut the outside dia first, and don't try to cut very deep at one pass- just gradually deeper through the gasket sheet. You'll get a decent edge on the gasket if you don't force the cutter. it may have been this one though, I don't use it very much: McMaster-Carr 36795A11 Thanks! |
|
I see us collectively as a country bumpkin, sitting on a log with a rifle, having no understanding what's going on beyond a few trees away, about to be enslaved with no interest by whom or what.
|
Originally Posted By spuddicus:
I've seen some scepters that were damn near impossible to open when it got hot out. eBay has some wrenches that people have made that take care of the leverage needed to open, I'd never use it to wrench them closed though as you'd put a lot of unnecessary pressure on the gaskets and flanges inside them. Those are the most common point of failure in the mfcs. If they made those flanges out of metal, I thing the mfc would be close to perfect. View Quote Yeah, dont use the wrenches to tighten them closed. But the wrenches are handy to have around. When the cans go through heat cycles the lids can be a bitch. A strap wrench from any local tool store will work about as well though. |
|
GLOCK Armorer
|
Originally Posted By DevilPig:
Yeah, dont use the wrenches to tighten them closed. But the wrenches are handy to have around. When the cans go through heat cycles the lids can be a bitch. A strap wrench from any local tool store will work about as well though. View Quote View All Quotes View All Quotes Originally Posted By DevilPig:
Originally Posted By spuddicus:
I've seen some scepters that were damn near impossible to open when it got hot out. eBay has some wrenches that people have made that take care of the leverage needed to open, I'd never use it to wrench them closed though as you'd put a lot of unnecessary pressure on the gaskets and flanges inside them. Those are the most common point of failure in the mfcs. If they made those flanges out of metal, I thing the mfc would be close to perfect. Yeah, dont use the wrenches to tighten them closed. But the wrenches are handy to have around. When the cans go through heat cycles the lids can be a bitch. A strap wrench from any local tool store will work about as well though. Store bought strap certainly wrenches work, are a bit awkward, that's what I used to use years ago... However, the made for Scepter wrenches are a dream if you open many cans in hot wx... |
|
I see us collectively as a country bumpkin, sitting on a log with a rifle, having no understanding what's going on beyond a few trees away, about to be enslaved with no interest by whom or what.
|
Originally Posted By EXPY37:
Store bought strap certainly wrenches work, are a bit awkward, that's what I used to use years ago... However, the made for Scepter wrenches are a dream if you open many cans in hot wx... View Quote View All Quotes View All Quotes Originally Posted By EXPY37:
Originally Posted By DevilPig:
Originally Posted By spuddicus:
I've seen some scepters that were damn near impossible to open when it got hot out. eBay has some wrenches that people have made that take care of the leverage needed to open, I'd never use it to wrench them closed though as you'd put a lot of unnecessary pressure on the gaskets and flanges inside them. Those are the most common point of failure in the mfcs. If they made those flanges out of metal, I thing the mfc would be close to perfect. Yeah, dont use the wrenches to tighten them closed. But the wrenches are handy to have around. When the cans go through heat cycles the lids can be a bitch. A strap wrench from any local tool store will work about as well though. Store bought strap certainly wrenches work, are a bit awkward, that's what I used to use years ago... However, the made for Scepter wrenches are a dream if you open many cans in hot wx... Agreed. For the person who only has one MFC or only occasionally uses them a strap wrench is fine though IMO. I have 10 MFCs...so I use the wrench. I prefer the rocking k cap wrench. |
|
GLOCK Armorer
|
Beowulf wrote up a good thread on how to use a nato jerry can as an external fuel tank. I am including a link to it here, as it expands on the adapter that is briefly mentioned on page 35 of this thread.
NATO fuel can as auxiliary fuel tank |
|
|
Case of 4 Authentic Nato 5 Gallon O.d. Jerry Metal Gas Can with Spout and Gaskets
by wavian $50.99 Jerr Cans What say the Oracle?? |
|
|
Originally Posted By BUCK1911:
Case of 4 Authentic Nato 5 Gallon O.d. Jerry Metal Gas Can with Spout and Gaskets by wavian $50.99 Jerr Cans What say the Oracle?? View Quote Woah. My too good to be true alarm is going off. |
|
There are hundreds of reasons to own a gun but it’s mostly the reasons I can't think of that make me glad to have them.
|
Originally Posted By LTCetme:
Woah. My too good to be true alarm is going off. View Quote View All Quotes View All Quotes Originally Posted By LTCetme:
Originally Posted By BUCK1911:
Case of 4 Authentic Nato 5 Gallon O.d. Jerry Metal Gas Can with Spout and Gaskets by wavian $50.99 Jerr Cans What say the Oracle?? Woah. My too good to be true alarm is going off. Mine to. So I only ordered 32 |
|
|
Mine too. They are listed as $330/4 with free shipping right now. What gives?
Also, who knows where to get truly good viton seals for the Blitz military cans? I just read where Blitz went (or is going) out of business due to lawsuits. Seems some idiot, IMHO, in Idaho poured gas on a fire and the can blew up. Guy lost his lawsuit but it still cost Blitz $2.5 million. Liability insurance is too high for them to continue to operate. IDIOT PEOPLE!!! |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.