User Panel
Thanks! Just in time for this tip. My stuff from Strapworks came in just this afternoon. Had I not seen this I probably would have wasted 7.5 ft of webing. Luckily I bought 20ft extra of the 1.5 so I could just lop off the 7in lengths no prob. First one took a little while to figure the orientation of the buckles but after the first one was done I finished the second one before my cigarrette was out. Also thanks again Strapworks! I ordered my stuff Sunday evening and the USPS guy showed up at noon on Tuesday! |
|
|
Thanks a bunch for the directions. I put together my kit from Strapworks last week. The only problem I've noticed is that I'd have been better off using a 7" piece of webbing instead of the 1.5 inche wide 5" long piece. 5" was just too tight. It looked nice but not enough for a good bite in the buckle's. I had it pop loose while carrying on a hike (after about an hour). Tom |
|
I have a friend in the Border Patrol who works in the San Diego sector. He was recently issued an M4, so I sent him to this thread. After considerable difficulty finding the parts, he built the sling and couldn't be happier with it.
His words:
And here is the long list of places he had to go to find all the parts:
Since he has used it in the field and really likes it, I will definitely be making my own. He said he paid about $14 altogether (high SoCal inflation, I'm sure :-) ). Not bad considering the Galco tactical sling is $50! |
||
|
|
Guys,
My "step 6 assembly" came apart somehow. The "tail" end coming out of the female clip came out. Anybody else have that? Should I maybe superglue those tails down? advice? |
|
NICE. just wonderwd why you put the black circle over the dog's face ?
|
|
To keep the Dogs right to privacy in tact of course.
Never trust an "anti gunner" even with a Innocent dog cuss those bastards have no respect :) |
|
Just ordered some goodiesfrom them to put a few slings together. I'll post pics when all of it arrives. |
|
|
I did one, got the stuff from Strapworks. I works great took all of 15-20 min. to put it together.
thanks |
|
hanks!!
This thread is great! |
|
Thought I would show off my little project. It was taken from the orginal post here and I did some sewing and made the sling a little different for my work.
http://i238.photobucket.com/albums/ff295/Texaspoff/arsling2.jpg http://i238.photobucket.com/albums/ff295/Texaspoff/ARsling.jpg |
|
Ordered the "kit" from Strapworks.com. Got it in two days (they are one state away from me). Put it together at work, works like a charm.
|
|
Anyone have simple plans to adapt this to an A2 stock? I've seen some picks of the webbing wrapping around the end of the A2 stock and coming off the top of the stock, but I was hoping someone had built their own and could share their plans.
Thanks in advance. |
|
|
If one wanted to use swivel attachments instead of wrapping the butt stock and barrel, what would the hook up be for that? Just wrap the short pieces around the swivels?
|
|
Alright, now it's personal. We don't have an ACE in town, so I went to Menards, Lowes, True Value, and a fabrics store. Found nothing but the 1" webbing and Velcro! Dangitall! My son and I were planning on this for a project today, as it's way too yucky for our annual day-before-Thanksgiving rabbit/pheasant hunt. Guess I'll have to find an ACE store.
But ... you should have seen the look on the lady's face at Joanne Fabrics when she asked what it was for and I said "A rifle sling"! Looked like she was going to faint on the spot! |
|
Anyone know where I can get some 30 mm webbing? I want to attach one of these slings to my HK 91.
|
|
If you are looking to sew the straps together get a Quick Stich Sewing Awl from Harbor freight. www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=91812 Only $4.99. Here is the link for the how to use manual.
www.harborfreight.com/manuals/91000-91999/91812.pdf |
|
How does that work? |
|
|
I found this site. Don't know anything about them. DIY Tactical |
|
|
Yet another DIY project for me to do. I really have to stop coming here this is gonna keep me busy for the next several months. Got somewhere around 20 slings I need to make.
|
|
The Ace Hardware stores here do not have all that stuff. Anyone know any other possible locations for the material needed?
Nevermind www.strapworks.com/ |
|
Well, I just ordered everything I need for a sling from them and the total was a little over $11 including shipping. Of course, I ordered 7 yards of nylon, so that could be it too. (I have some extra bags lying around I can take parts off of for another sling.) |
||
|
I just made mine and the final cost was $5.40. Thank you for the step by step.
|
|
|
Just bought the supplies from DIYtactical.com for <$10 shipped.
|
|
Checked at my local Ace and a half dozen other places including fabric stores, REI, and the Army/Navy store and nobody has anything but plain old black webbing. I also looked for a cam lock buckle like the one on the Specter SOP and found them in 1" and 2" sizes, but no 1 1/2". Anyone have any other sources for these types of materials?hinking.gif
|
|
www.diytacticalstore.com/catalog/index.php?main_page=index |
|
|
Strapman,
Can you substitute a 1 1/2" cam lock for one of the slide locks in your kit? |
|
I second that, I have this sling in my M4's, but want to adapt to A2 fixed. Maybe just add a mount point at the front of the stock?
|
|
There are lots of adapters out there that let you put a regular sling swivel stud somewhere on the front handguard or front sight post. Make a second sling and use the 1" webbing to attach a 1" QD Sling swivel. I want a camlock buckle up front to make the sling even more like the Specter SOP, but without the $40 pricetag. |
|
|
Is there a reason no one attaches the sling to the swivel on the tail end of the m4 butt stock? I see some people attach the front to the little swivel in front of the handguards, but I don't ever see that style off attaching on the back of the rifle.
|
|
Also, did anyone here actually get their "samples" from Nexus?
|
|
Thanks.
Just ordered my kit from strapworks.com for 10 bucks including shipping. Can't beat that price. |
|
I just put together my strapworks kit and did that at first but found it much better to attach through the slot under the buffer tube and loop around the tube while shortening that piece to about 9". Play around with it though to see what fits you best. |
|
|
I got my first sling completed, I now have to get front sight sling attachments and a sling attachment for my CAR stock so I can use it like its supposed to done.
As soon as I can figure out how to make one that will suit my Brother's needs in Afghanistan I'll sew it and send it over. I think its a 3 point sling but I've never seen one before, his attached to the retaining plate for the M4 spanner nut for what its called. |
|
Thank you! I didn't think anyone would actually reply! Anyway, I got my stuff from Nexus and ordered my stuff from Strapworks but still have nothing. After hearing about their quick service, I'm dissapointed that I don't have my webbing yet. Of course, I they may be across the country from me and that may account for the delay. Either way, I'm excited to get all my stuff and do this little project. I actually went with "Olive Drab" to contrast with my black Stag rifle. |
||
|
Just ordered everything for $11.26 including shipping. Although they didn't have any 1.5in black tri-glides so I ordered the green. No biggie, I can always replace them when they get them in stock. |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.