User Panel
User Panel
User Panel
|
Posted: 11/26/2015 11:28:07 AM EST
[#1]
Quote HistoryOriginally Posted By schaffer:
I've unknowingly bought fake shit off of eBay before. That pisses me off , i reported him too.. Quote HistoryOriginally Posted By schaffer:
Originally Posted By brodband8:
god damn, I found the "airsoft" one that guy is selling. not his: but airsoft nonetheless. http://www.ebay.com/itm/HKA-LMT-SOPMOD-MK18-MOD-CRANE-Stock-For-AEG-GBB-Systema-PTW-TAN-US-/161895531725?hash=item25b1b9c4cd:g:W-8AAOSwqu9VFZY1 I can't believe what that guy is saying in the auction description. WHAT A FUCKING LIAR. http://www.ebay.com/itm/LMT-Sopmod-stock-gen-2-milspec-FDE-/331717111361?hash=item4d3be16e41:g:NBoAAOSwu-BWPQU~ I've unknowingly bought fake shit off of eBay before. That pisses me off , i reported him too.. Same here, on both accounts.. bought fake stuff before, and reported that D-bag. |
|
|
|
|
Posted: 11/26/2015 12:00:50 PM EST
[#2]
Quote HistoryOriginally Posted By Finslayer83:
<a href="https://flic.kr/p/BpJQWB" target="_blank">https://farm1.staticflickr.com/725/23241125631_c368beabc1_k.jpg</a>DSC_6838.JPG by The Dorsal Fin, on Flickr 
Well done Fin! |
|
|
|
|
Posted: 11/26/2015 12:20:28 PM EST
[#3]
Quote HistoryWell I know for a fact that the rail should go in the mail shipped to my house (for a fair price of course  )
|
|
|
|
|
Posted: 11/26/2015 12:26:27 PM EST
[#4]
Quote HistoryOriginally Posted By eblack:
Well I know for a fact that the rail should go in the mail shipped to my house (for a fair price of course )Quote HistoryOriginally Posted By eblack:
Well I know for a fact that the rail should go in the mail shipped to my house (for a fair price of course )But for realz though. That rail deserves to be on a mk18 clone |
|
|
|
USA
|
Posted: 11/26/2015 10:36:30 PM EST
[#5]
As always, I'm thankful for my loving family and great friends, but I'm also thankful for finally completing my block 2. Now I can finally move onto something else. Also, props to the people who've provided parts guidance and great prices.
DD complete upper w/ 14.5 CHF barrel DD RIS II FSP Surefire 3-prong pin and welded by ADCO LMT Defender 2000 complete lower LMT Gen 1 SOPMOD stock H2 Buffer with JP enhanced spring Geissele SSA trigger KAC 200-600 rear sight Eotech EXPS3-0 Tan TangoDown QD VFG Surefire M600C CQD front and rear sling mounts (not pictured) 
|
|
|
|
Posted: 11/26/2015 10:45:02 PM EST
[Last Edit: AmericanCheese]
[#6]
|
|
|
|
USA
|
Posted: 11/26/2015 10:49:48 PM EST
[#7]
http://www.ebay.com/itm/LMT-Sopmod-stock-gen-2-milspec-FDE-/331717111361?hash=item4d3be16e41:g:NBoAAOSwu-BWPQU~&rmvSB=true
Looks like he ended this one too... |
|
|
|
Posted: 11/26/2015 10:56:48 PM EST
[#8]
Quote HistoryOriginally Posted By eblack:
But for realz though. That rail deserves to be on a mk18 clone Quote HistoryOriginally Posted By eblack:
Originally Posted By eblack:
Well I know for a fact that the rail should go in the mail shipped to my house (for a fair price of course )But for realz though. That rail deserves to be on a mk18 clone Which I can toss it on my mk18.... But I'd have to take off the geissele MKI that's on it now and that thing is the shit. Besides it's cooler than a KAC setup on a 14.5 |
|
|
|
|
Posted: 11/26/2015 10:58:13 PM EST
[#9]
Quote HistoryOriginally Posted By schaffer:
http://www.ebay.com/itm/LMT-Sopmod-stock-gen-2-milspec-FDE-/331717111361?hash=item4d3be16e41:g:NBoAAOSwu-BWPQU~&rmvSB=true Looks like he ended this one too... Probably because he kept getting reported. I know I reported his ass. 
|
|
|
|
CA, USA
|
Posted: 11/27/2015 12:48:12 PM EST
[#10]
Heads up guys, Ken over at Kerif is offering 30% off Elcan msrps. I just took the plunge on an fde specterDR! So excited!
|
|
|
OK, USA
|
Posted: 11/27/2015 9:57:57 PM EST
[#11]
I stripped the paint from my rifle today to match an old CAR stock that I got. I was planning on repainting it later, but I kind of like the stripped paint hardcore teir 1 operator look right now
|
|
|
|
Posted: 11/27/2015 10:21:59 PM EST
[#12]
Quote HistoryOriginally Posted By UsubM:
I stripped the paint from my rifle today to match an old CAR stock that I got. I was planning on repainting it later, but I kind of like the stripped paint hardcore teir 1 operator look right now http://i.imgur.com/G4ZH4aMh.jpg http://i.imgur.com/wOtYoWEh.jpg I'd leave it. That thing looks dope. |
|
|
|
|
Posted: 11/27/2015 10:49:22 PM EST
[#13]
Properly broke in the Gen 1 Taupe SOPMOD today, and she is definitely staying on the Block II. The color fits the build awesomely. I will be listing my painted Gen 1 here soon if anyone is interested.
|
|
|
|
|
Posted: 11/27/2015 11:28:14 PM EST
[#14]
Quote HistoryOriginally Posted By UsubM:
I stripped the paint from my rifle today to match an old CAR stock that I got. I was planning on repainting it later, but I kind of like the stripped paint hardcore teir 1 operator look right now http://i.imgur.com/G4ZH4aMh.jpg http://i.imgur.com/wOtYoWEh.jpg What did you use for stripper? I would leave it as well! |
|
|
|
|
Posted: 11/27/2015 11:28:21 PM EST
[#15]
Quote HistoryOriginally Posted By gaston4:
Properly broke in the Gen 1 Taupe SOPMOD today, and she is definitely staying on the Block II. The color fits the build awesomely. I will be listing my painted Gen 1 here soon if anyone is interested. https://farm1.staticflickr.com/724/22732462014_c058e56a1a_c.jpg https://farm1.staticflickr.com/669/22733690663_545e3ce263_c.jpg Looking good! |
|
|
|
USA
|
Posted: 11/28/2015 3:46:36 PM EST
[#16]
RIS II FSP owners... How are you all placing the rifle when you install and remove the FSP taper pins with the top portion of the rail in the way? I can't figure out a good strategy that won't damage the rail. Thanks.
|
|
|
|
Posted: 11/28/2015 3:48:09 PM EST
[#17]
Quote HistoryOriginally Posted By gaston4:
Properly broke in the Gen 1 Taupe SOPMOD today, and she is definitely staying on the Block II. The color fits the build awesomely. I will be listing my painted Gen 1 here soon if anyone is interested. https://farm1.staticflickr.com/724/22732462014_c058e56a1a_c.jpg https://farm1.staticflickr.com/669/22733690663_545e3ce263_c.jpg Props to whoeever took that top pic. That's solid. |
|
|
|
|
Posted: 11/28/2015 3:57:25 PM EST
[#18]
Quote HistoryOriginally Posted By ECPrevatte:
Props to whoeever took that top pic. That's solid. Quote HistoryOriginally Posted By ECPrevatte:
Originally Posted By gaston4:
Properly broke in the Gen 1 Taupe SOPMOD today, and she is definitely staying on the Block II. The color fits the build awesomely. I will be listing my painted Gen 1 here soon if anyone is interested. https://farm1.staticflickr.com/724/22732462014_c058e56a1a_c.jpg https://farm1.staticflickr.com/669/22733690663_545e3ce263_c.jpg Props to whoeever took that top pic. That's solid. Thanks man, I will be sure to tell him. Definitely means a lot coming from you with all the great photos you crank out. We both just got fixed 50mm 1.8 lenses and have been loving the results with portraits. |
|
|
|
IN, USA
|
Posted: 11/28/2015 5:22:01 PM EST
[#19]
Quote HistoryOriginally Posted By byou79:
RIS II FSP owners... How are you all placing the rifle when you install and remove the FSP taper pins with the top portion of the rail in the way? I can't figure out a good strategy that won't damage the rail. Thanks. Don't install the 6 bolt up screws until after you install the taper pins. If it is loose, you can push it up and mostly out of the way to get a block on the bottom side of the FSB. You can put painters tape on the barrel where it rubs if you don't want to scratch the Parkerizing. |
|
|
|
Posted: 11/28/2015 5:25:24 PM EST
[#20]
Quote HistoryOriginally Posted By pezboytate:
Don't install the 6 bolt up screws until after you install the taper pins. If it is loose, you can push it up and mostly out of the way to get a block on the bottom side of the FSB. You can put painters tape on the barrel where it rubs if you don't want to scratch the Parkerizing. Quote HistoryOriginally Posted By pezboytate:
Originally Posted By byou79:
RIS II FSP owners... How are you all placing the rifle when you install and remove the FSP taper pins with the top portion of the rail in the way? I can't figure out a good strategy that won't damage the rail. Thanks. Don't install the 6 bolt up screws until after you install the taper pins. If it is loose, you can push it up and mostly out of the way to get a block on the bottom side of the FSB. You can put painters tape on the barrel where it rubs if you don't want to scratch the Parkerizing. ^that right there is the best way to go about it. I've also done it with the 6 bolts fully seated, which still works with my punches but they are at a slight angle so it's not 100 percent optimal but still easily doable. Then again I don't worry about scratching things..... 
|
|
|
|
USA
|
Posted: 11/28/2015 6:52:03 PM EST
[#21]
Quote HistoryOriginally Posted By pezboytate:
Don't install the 6 bolt up screws until after you install the taper pins. If it is loose, you can push it up and mostly out of the way to get a block on the bottom side of the FSB. You can put painters tape on the barrel where it rubs if you don't want to scratch the Parkerizing. Quote HistoryOriginally Posted By pezboytate:
Originally Posted By byou79:
RIS II FSP owners... How are you all placing the rifle when you install and remove the FSP taper pins with the top portion of the rail in the way? I can't figure out a good strategy that won't damage the rail. Thanks. Don't install the 6 bolt up screws until after you install the taper pins. If it is loose, you can push it up and mostly out of the way to get a block on the bottom side of the FSB. You can put painters tape on the barrel where it rubs if you don't want to scratch the Parkerizing. Do you just lay the upper on its side? Do you support it with wood? The problem I'm having is finding the optimal way to lay the rifle flat because the rail is in the way. |
|
|
|
Posted: 11/28/2015 7:21:35 PM EST
[#22]
Quote HistoryOriginally Posted By byou79:
Do you just lay the upper on its side? Do you support it with wood? The problem I'm having is finding the optimal way to lay the rifle flat because the rail is in the way. Quote HistoryOriginally Posted By byou79:
Originally Posted By pezboytate:
Originally Posted By byou79:
RIS II FSP owners... How are you all placing the rifle when you install and remove the FSP taper pins with the top portion of the rail in the way? I can't figure out a good strategy that won't damage the rail. Thanks. Don't install the 6 bolt up screws until after you install the taper pins. If it is loose, you can push it up and mostly out of the way to get a block on the bottom side of the FSB. You can put painters tape on the barrel where it rubs if you don't want to scratch the Parkerizing. Do you just lay the upper on its side? Do you support it with wood? The problem I'm having is finding the optimal way to lay the rifle flat because the rail is in the way. I lay mine flat on carpet. That way the carpet will avoid any damage to the rail, but enough sturdiness to pound in the taper pins. |
|
|
|
|
Posted: 11/28/2015 7:39:19 PM EST
[#23]
I put mine on the concrete and smashed it like an ape.
I was more careful with the MK18 FSP though, but still on concrete. |
|
|
|
|
Posted: 11/28/2015 11:59:20 PM EST
[#24]
Got a Docter II and found a Lonestar. Feels pretty cool so far.
|
|
|
|
CA, USA
|
Posted: 11/29/2015 11:38:34 AM EST
[#25]
Quote HistoryOriginally Posted By SilkyJohnson:
Got a Docter II and found a Lonestar. Feels pretty cool so far. http://i65.tinypic.com/rrmj2a.jpg I love the Lonestars retro look and feel. I sport them on my Block II and 1.5 build. |
|
|
|
Posted: 11/29/2015 4:16:03 PM EST
[Last Edit: Bohguy]
[#26]
Hey guys I'm getting out of the Block 2 game
If anyone is looking for an -All Colt upper with DD FSP RISII -SU-231 marked FDE EOTech 553, -SU-233 marked M3x and dual switch -Tangodown FDE Insight VG I know its poor form to do this, but you are the ones who would be looking for this stuff http://www.ar15.com/forums/t_7_159/1493211_WTS__M4A1_Block_II_Parts__Colt_FSP_RISII_Upper__EOTech_SU231_553__Insight_SU233_M3X__Tangodown_VFG.html |
|
|
|
USA
|
Posted: 11/30/2015 10:46:22 AM EST
[#27]
Can't stop shooting and admiring the block 2 even though she's a heavy bitch. The DD RIS 2 rail is nice, although I could do without the flathead screws that secure the lower portion.
Also, I can't get the damn RIS 2 rail to mount and center perfectly. It's always off by 1/16 of an inch on one side. Prior to mounting the lower portion, it's perfect. Once I screw it on, it shifts. It's pretty annoying. |
|
|
IN, USA
|
Posted: 11/30/2015 11:37:36 AM EST
[#28]
Quote HistoryOriginally Posted By byou79:
Do you just lay the upper on its side? Do you support it with wood? The problem I'm having is finding the optimal way to lay the rifle flat because the rail is in the way. Quote HistoryOriginally Posted By byou79:
Originally Posted By pezboytate:
Originally Posted By byou79:
RIS II FSP owners... How are you all placing the rifle when you install and remove the FSP taper pins with the top portion of the rail in the way? I can't figure out a good strategy that won't damage the rail. Thanks. Don't install the 6 bolt up screws until after you install the taper pins. If it is loose, you can push it up and mostly out of the way to get a block on the bottom side of the FSB. You can put painters tape on the barrel where it rubs if you don't want to scratch the Parkerizing. Do you just lay the upper on its side? Do you support it with wood? The problem I'm having is finding the optimal way to lay the rifle flat because the rail is in the way. Thin carpet on concrete floor, wife holding the upper and rail while I install the pins. |
|
|
IN, USA
|
Posted: 11/30/2015 11:41:44 AM EST
[#29]
Quote HistoryOriginally Posted By byou79:
Can't stop shooting and admiring the block 2 even though she's a heavy bitch. The DD RIS 2 rail is nice, although I could do without the flathead screws that secure the lower portion. Also, I can't get the damn RIS 2 rail to mount and center perfectly. It's always off by 1/16 of an inch on one side. Prior to mounting the lower portion, it's perfect. Once I screw it on, it shifts. It's pretty annoying. Big delay between clicking on this thread and my last reply. It would bug me if it was off by that much, sometimes you need to remove and reinstall the bolt up screws and maybe even re-tighten the barrel nut. Try tightening one side before the other and then try the opposite way. The lower rail should have no effect on it unless it is contacting the barrel somewhere (the FSB maybe?). |
|
|
|
Posted: 11/30/2015 12:44:09 PM EST
[#30]
Heads up guys, just threw up my TA0101 in the EE.
|
|
|
|
USA
|
Posted: 11/30/2015 4:30:42 PM EST
[#31]
Quote HistoryOriginally Posted By pezboytate:
Big delay between clicking on this thread and my last reply. It would bug me if it was off by that much, sometimes you need to remove and reinstall the bolt up screws and maybe even re-tighten the barrel nut. Try tightening one side before the other and then try the opposite way. The lower rail should have no effect on it unless it is contacting the barrel somewhere (the FSB maybe?). Quote HistoryOriginally Posted By pezboytate:
Originally Posted By byou79:
Can't stop shooting and admiring the block 2 even though she's a heavy bitch. The DD RIS 2 rail is nice, although I could do without the flathead screws that secure the lower portion. Also, I can't get the damn RIS 2 rail to mount and center perfectly. It's always off by 1/16 of an inch on one side. Prior to mounting the lower portion, it's perfect. Once I screw it on, it shifts. It's pretty annoying. Big delay between clicking on this thread and my last reply. It would bug me if it was off by that much, sometimes you need to remove and reinstall the bolt up screws and maybe even re-tighten the barrel nut. Try tightening one side before the other and then try the opposite way. The lower rail should have no effect on it unless it is contacting the barrel somewhere (the FSB maybe?). Yeah, it's pretty annoying knowing it's not centered, but I guess it ain't the end of the world. I'm pretty sure much worse is going to happen as I plan to beat the living piss out of this one... |
|
|
|
Posted: 11/30/2015 4:34:07 PM EST
[#32]
I had the same issue with my first RIS II. DD sent me a new hardware package including a new mount-up plate, which fixed the issue. Also make sure you tighten the bolts in a star pattern like lug nuts.
|
|
|
|
USA
|
Posted: 11/30/2015 7:15:34 PM EST
[#33]
Quote HistoryOriginally Posted By MILSPEC556:
I had the same issue with my first RIS II. DD sent me a new hardware package including a new mount-up plate, which fixed the issue. Also make sure you tighten the bolts in a star pattern like lug nuts. Ironically, I haven't tried a star pattern. The instructions say to tighten the middle bolts first. Then bottom. Then top. Maybe I read it wrong. I'll try again tonight. |
|
|
TX, USA
|
Posted: 11/30/2015 7:50:30 PM EST
[#34]
star pattern works if your hardware is in spec. I had to have a new plate sent to me as well on my most current ris ii.
What makes the install easy for me is to slap my irons on the gun, put it on a lower and put my laser bore sight in. I snug it up when the sights are good then tighten in a star pattern. Have never had to adjust windage since i started using this method and with the in spec parts the rail is nice and straight. |
|
|
CA, USA
|
Posted: 12/1/2015 12:00:23 AM EST
[Last Edit: Spectre186]
[#35]
|
|
|
|
Posted: 12/1/2015 12:11:36 AM EST
[#36]
Quote HistoryOriginally Posted By Spectre186: Christmas came early! Got an amazing deal on an fde specterDR from Kerif. http://i76.photobucket.com/albums/j13/Soectre186/Mobile%20Uploads/3D15945D-956F-418F-A911-7A857297BCE7_zpsvu9gz5ca.jpg http://i76.photobucket.com/albums/j13/Soectre186/Mobile%20Uploads/6AFE5525-8774-42CF-9AAB-BD706D03366A_zpspjyqcmp0.jpg Love the dark fde, nearly a perfect match for ris ii. Can't wait to take her to the range. Very impressed so far. BTW, BCG's a little dry, ain't it? |
|
|
|
CA, USA
|
Posted: 12/1/2015 12:49:32 AM EST
[#37]
Quote HistoryOriginally Posted By secretwheelman:
I need to break down and buy one myself. BTW, BCG's a little dry, ain't it? Quote HistoryOriginally Posted By secretwheelman:
Originally Posted By Spectre186:
Christmas came early! Got an amazing deal on an fde specterDR from Kerif. http://i76.photobucket.com/albums/j13/Soectre186/Mobile%20Uploads/3D15945D-956F-418F-A911-7A857297BCE7_zpsvu9gz5ca.jpg http://i76.photobucket.com/albums/j13/Soectre186/Mobile%20Uploads/6AFE5525-8774-42CF-9AAB-BD706D03366A_zpspjyqcmp0.jpg Love the dark fde, nearly a perfect match for ris ii. Can't wait to take her to the range. Very impressed so far. BTW, BCG's a little dry, ain't it? Yeah, perhaps it's time to move on from breakfree clp |
|
|
TX, USA
|
Posted: 12/1/2015 12:56:36 AM EST
[#38]
Quote HistoryOriginally Posted By Spectre186: Yeah, perhaps it's time to move on from breakfree clp Quote HistoryOriginally Posted By Spectre186: Originally Posted By secretwheelman: Originally Posted By Spectre186: Christmas came early! Got an amazing deal on an fde specterDR from Kerif. http://i76.photobucket.com/albums/j13/Soectre186/Mobile%20Uploads/3D15945D-956F-418F-A911-7A857297BCE7_zpsvu9gz5ca.jpg http://i76.photobucket.com/albums/j13/Soectre186/Mobile%20Uploads/6AFE5525-8774-42CF-9AAB-BD706D03366A_zpspjyqcmp0.jpg Love the dark fde, nearly a perfect match for ris ii. Can't wait to take her to the range. Very impressed so far. BTW, BCG's a little dry, ain't it? Yeah, perhaps it's time to move on from breakfree clp |
|
|
USA
|
Posted: 12/1/2015 9:48:23 AM EST
[#39]
Trying to stay as true to a clone build as I can, I wanted to verify that an aimpoint T1/T2 is a suitable optic. I know it's probably nitpicking but I guess I'm a stickler about it.
Thanks for the help guys. |
|
|
|
Posted: 12/1/2015 10:01:51 AM EST
[#40]
Quote HistoryOriginally Posted By Dryflyguy:
Trying to stay as true to a clone build as I can, I wanted to verify that an aimpoint T1/T2 is a suitable optic. I know it's probably nitpicking but I guess I'm a stickler about it. Thanks for the help guys. It's suitable, but I don't think its "correct." Just about anything has been seen in the wild, but if you want to be as true as possible you'd need to look into other options, (su231a, su-230, etc.) |
|
|
|
CA, USA
|
Posted: 12/1/2015 11:02:23 AM EST
[#41]
Quote HistoryOriginally Posted By byou79:
Can't stop shooting and admiring the block 2 even though she's a heavy bitch. The DD RIS 2 rail is nice, although I could do without the flathead screws that secure the lower portion. Also, I can't get the damn RIS 2 rail to mount and center perfectly. It's always off by 1/16 of an inch on one side. Prior to mounting the lower portion, it's perfect. Once I screw it on, it shifts. It's pretty annoying. I've also had this problem. What ended being the problem for me was that the barrel nut wrench had slipped off the barrel nut during the install and gnarled up the slots for the teeth to grab. I filed Away any gnarling and lapped the face of the barrel nut. After that it lined up perfectly. |
|
|
|
Posted: 12/1/2015 11:09:16 AM EST
[#42]
Quote HistoryOriginally Posted By brodband8:
It's suitable, but I don't think its "correct." Just about anything has been seen in the wild, but if you want to be as true as possible you'd need to look into other options, (su231a, su-230, etc.) Quote HistoryOriginally Posted By brodband8:
Originally Posted By Dryflyguy:
Trying to stay as true to a clone build as I can, I wanted to verify that an aimpoint T1/T2 is a suitable optic. I know it's probably nitpicking but I guess I'm a stickler about it. Thanks for the help guys. It's suitable, but I don't think its "correct." Just about anything has been seen in the wild, but if you want to be as true as possible you'd need to look into other options, (su231a, su-230, etc.) I don't frequent the Block II thread as much, but I've only seen a few T1s on CQBRs. I haven't really noticed them on the M4 URGs. |
|
|
|
TX, USA
|
Posted: 12/1/2015 1:42:11 PM EST
[#43]
Quote HistoryOriginally Posted By ECPrevatte:
I don't frequent the Block II thread as much, but I've only seen a few T1s on CQBRs. I haven't really noticed them on the M4 URGs. Quote HistoryOriginally Posted By ECPrevatte:
Originally Posted By brodband8:
Originally Posted By Dryflyguy:
Trying to stay as true to a clone build as I can, I wanted to verify that an aimpoint T1/T2 is a suitable optic. I know it's probably nitpicking but I guess I'm a stickler about it. Thanks for the help guys. It's suitable, but I don't think its "correct." Just about anything has been seen in the wild, but if you want to be as true as possible you'd need to look into other options, (su231a, su-230, etc.) I don't frequent the Block II thread as much, but I've only seen a few T1s on CQBRs. I haven't really noticed them on the M4 URGs. T1s have been seen on block 1 and 2 M4A1s/CQBRs |
|
|
|
Posted: 12/1/2015 2:06:34 PM EST
[#44]
They've been seen, but they don't seem to be very common.
|
|
|
|
|
Posted: 12/1/2015 2:08:05 PM EST
[#45]
Quote HistoryOriginally Posted By 10Point3: T1s have been seen on block 1 and 2 M4A1s/CQBRs Quote HistoryOriginally Posted By 10Point3: Originally Posted By ECPrevatte: Originally Posted By brodband8: Originally Posted By Dryflyguy: Trying to stay as true to a clone build as I can, I wanted to verify that an aimpoint T1/T2 is a suitable optic. I know it's probably nitpicking but I guess I'm a stickler about it. Thanks for the help guys. It's suitable, but I don't think its "correct." Just about anything has been seen in the wild, but if you want to be as true as possible you'd need to look into other options, (su231a, su-230, etc.) I don't frequent the Block II thread as much, but I've only seen a few T1s on CQBRs. I haven't really noticed them on the M4 URGs. T1s have been seen on block 1 and 2 M4A1s/CQBRs |
|
|
|
|
Posted: 12/1/2015 5:49:45 PM EST
[#46]
|
|
|
|
USA
|
Posted: 12/1/2015 7:38:25 PM EST
[#47]
Thanks everyone for the info regarding the T1s
|
|
|
TX, USA
|
Posted: 12/1/2015 8:09:44 PM EST
[#48]
Quote HistoryOriginally Posted By azoutdoorsman:
Aimpoint micros are not listed in any SOPMOD upgrade phase that I'm aware of. Quote HistoryOriginally Posted By azoutdoorsman:
Originally Posted By 10Point3:
Originally Posted By ECPrevatte:
Originally Posted By brodband8:
Originally Posted By Dryflyguy:
Trying to stay as true to a clone build as I can, I wanted to verify that an aimpoint T1/T2 is a suitable optic. I know it's probably nitpicking but I guess I'm a stickler about it. Thanks for the help guys. It's suitable, but I don't think its "correct." Just about anything has been seen in the wild, but if you want to be as true as possible you'd need to look into other options, (su231a, su-230, etc.) I don't frequent the Block II thread as much, but I've only seen a few T1s on CQBRs. I haven't really noticed them on the M4 URGs. T1s have been seen on block 1 and 2 M4A1s/CQBRs no, theyre just "seen in the wild". but with all the eotech drama, who knows whats to come. |
|
|
OH, USA
|
Posted: 12/1/2015 11:01:54 PM EST
[#49]
Ken is a stand up guy and his customer service is top notch.
|
|
|
|
Posted: 12/2/2015 6:27:08 PM EST
[#50]
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
