User Panel
User Panel
User Panel
|
Posted: 11/4/2018 12:40:48 AM EST
[#1]
Quote HistoryOriginally Posted By krdt:
Ha, yeah I saw those on AU. Paying $70 for a carbon scraper seems a little steep, though. I didn't even mention my EXPS is turning black from blowback on the right side, lol. No big deal... suppressed shooting gives your gun character :D. http://wkd.site.nfoservers.com/CQBR/CQBR.110318.WBG-04.jpg Quote HistoryOriginally Posted By krdt:
Originally Posted By SecretSquirell:
Originally Posted By krdt:
Originally Posted By MILSPEC556:
Originally Posted By AZ_SBR: Pffftttt! Please... How do you think I fund my builds? Sellin' and shellin' baby. 
Originally Posted By krdt: Good tips, thanks. I had that general idea of lifting it off (I put a little weight under it to even it out from the CQD forward mount causing it to tip), but getting it up further definitely looks better. Very nice shots. You can see it's slightly hovering from this angle. This is my 4 prong after about an hour of brass brush scrubbing and scraping with a brass scraper :\. http://wkd.site.nfoservers.com/CQBR/CQBR.110318.WBG-03.jpg 
Gotta worry about baffle erosion and SF4P erosion now. An OCD man's nightmare! Actually only cleaned it because it was still sticking a bit to the can. Last time the same amount of cleaning got it looking new, this time it must have gotten significantly hotter, lol. Shit was baked on ra-dicalus. I'd probably have to soak it in solvent overnight to break loose the stuff between the tines. https://www.surefire.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/s/f/sf-acst-angle_2.png I didn't even mention my EXPS is turning black from blowback on the right side, lol. No big deal... suppressed shooting gives your gun character :D. http://wkd.site.nfoservers.com/CQBR/CQBR.110318.WBG-04.jpg
|
|
|
|
WA, USA
|
Posted: 11/4/2018 12:43:16 AM EST
[#2]
Folks with their 10.3" 0.070" gas ports. When suppressed, where are your casings ejecting at? Mine is at 2 o'clock.
|
|
|
|
Posted: 11/4/2018 12:46:48 AM EST
[#3]
Quote HistoryOriginally Posted By SecretSquirell:
For the 1-device owner or someone that never cleans, it would definitely be a waste. But if one shoots a shit load or has several md's, it might be worth it. I'd probably get one just because I like having an excuse to buy new tools. Quote HistoryOriginally Posted By SecretSquirell:
Originally Posted By krdt:
Originally Posted By SecretSquirell:
Originally Posted By krdt:
Originally Posted By MILSPEC556:
Originally Posted By AZ_SBR: Pffftttt! Please... How do you think I fund my builds? Sellin' and shellin' baby.
Originally Posted By krdt: Good tips, thanks. I had that general idea of lifting it off (I put a little weight under it to even it out from the CQD forward mount causing it to tip), but getting it up further definitely looks better. Very nice shots. You can see it's slightly hovering from this angle. This is my 4 prong after about an hour of brass brush scrubbing and scraping with a brass scraper :\. http://wkd.site.nfoservers.com/CQBR/CQBR.110318.WBG-03.jpg
Gotta worry about baffle erosion and SF4P erosion now. An OCD man's nightmare! Actually only cleaned it because it was still sticking a bit to the can. Last time the same amount of cleaning got it looking new, this time it must have gotten significantly hotter, lol. Shit was baked on ra-dicalus. I'd probably have to soak it in solvent overnight to break loose the stuff between the tines. https://www.surefire.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/s/f/sf-acst-angle_2.png I didn't even mention my EXPS is turning black from blowback on the right side, lol. No big deal... suppressed shooting gives your gun character :D. http://wkd.site.nfoservers.com/CQBR/CQBR.110318.WBG-04.jpg |
|
|
|
|
Posted: 11/4/2018 12:48:04 AM EST
[#4]
Quote HistoryOriginally Posted By Seattle206:
Folks with their 10.3" 0.070" gas ports. When suppressed, where are your casings ejecting at? Mine is at 2 o'clock. |
|
|
|
|
Posted: 11/4/2018 12:48:52 AM EST
[#5]
Quote HistoryOriginally Posted By krdt: That's a "I know I am paying way too much for a fucking rollmark, but I want it anyway" slanty face. |
|
|
|
|
Posted: 11/4/2018 12:52:30 AM EST
[#6]
Quote HistoryOriginally Posted By wissota4:
and hardly the correct roll mark though :/ Quote HistoryOriginally Posted By wissota4:
Originally Posted By krdt: That's a "I know I am paying way too much for a fucking rollmark, but I want it anyway" slanty face. Still, it's the most correct factory Colt lower available short of an M16. |
|
|
|
|
Posted: 11/4/2018 12:58:08 AM EST
[#7]
Quote HistoryOriginally Posted By krdt: True, but it's a genuine Colt with M4A1 and Govt Property markings. That's not to say I'd complain if they dropped the stupid UID engraving and put Safe/Semi/Auto instead of Safe/Fire, though. Still, it's the most correct factory Colt lower available short of an M16. when you say 'genuine colt' though i feel like youre making all the other lowers feel inferior :/ |
|
|
|
|
Posted: 11/4/2018 1:06:39 AM EST
[#8]
Quote HistoryOriginally Posted By wissota4:
Truth, it is the most correct colt lower. when you say 'genuine colt' though i feel like youre making all the other lowers feel inferior :/ Quote HistoryOriginally Posted By wissota4:
Originally Posted By krdt: True, but it's a genuine Colt with M4A1 and Govt Property markings. That's not to say I'd complain if they dropped the stupid UID engraving and put Safe/Semi/Auto instead of Safe/Fire, though. Still, it's the most correct factory Colt lower available short of an M16. when you say 'genuine colt' though i feel like youre making all the other lowers feel inferior :/ Nah, I just like that it's a factory Colt with those markings. Also ups my chances of matching the anodizing to my Colt uppers. If I had more confidence I could get an 80% anodized to be very similar to Colt anodizing, I'd probably go that route. |
|
|
|
|
Posted: 11/4/2018 1:13:31 AM EST
[Last Edit: wissota4]
[#9]
Quote HistoryOriginally Posted By krdt: Haha... it's a REAL Colt not an 80% that "identifies" as a Colt ;p. Nah, I just like that it's a factory Colt with those markings. Also ups my chances of matching the anodizing to my Colt uppers. If I had more confidence I could get an 80% anodized to be very similar to Colt anodizing, I'd probably go that route.
honestly though, when comparing my issued lower to the looks of a regular bought lower.. the colors dont seem too far off. |
|
|
|
|
Posted: 11/4/2018 1:57:44 AM EST
[#10]
Originally Posted By wissota4:
What happened man? The blk 1 and blk2 where looking great. Originally Posted By usnguns:
http://i.imgur.com/nkoML3w.jpg Originally Posted By AZ_SBR: Yes, the right lighting makes a huge difference, but you'll give yourself a head start by getting that rifle up and off of the posterboard. Balancing it on an object placed in between the gun and the posterboard will help eliminate so much shadowing and avoids the natural lean of the rifle when it's otherwise set on a flat surface. An RX bottle or something similar in diameter placed at the gun's balancing point will work fine. It hides behind the rifle and the result is you get a nicer looking shot. Us iPhone gun pic takers gotta work on the cheap, ya know? Some examples... https://farm5.staticflickr.com/4859/31835007588_a33ac97d7b_c.jpg https://farm2.staticflickr.com/1956/30360710997_8ac73b9105_c.jpg https://farm2.staticflickr.com/1921/44951509381_fe511b8776_c.jpg And I agree, nice Block I build, HD! trick, after 10 min of droppin my cqbr I was ready to down all thos pills.  Maybe that's the trick. Are they suppose to be Xanax bottles? Then I have to edit? Lol. I love the way yer pics turn out though, mine just ehh, don't quite do it. Cement backdrop with whatever seasonal debris is floating in my yard gets the point across.
|
|
|
|
|
Posted: 11/4/2018 2:59:35 AM EST
[#11]
|
|
|
|
|
Posted: 11/4/2018 11:05:18 AM EST
[#12]
Quote HistoryOriginally Posted By Combat_Diver:
https://www.AR15.Com/media/mediaFiles/32677/IMG_5797_jpg-727321.JPG https://www.AR15.Com/media/mediaFiles/32677/IMG_5798_jpg-727322.JPG CD Seems like an old gun: - it’s marked Colt’s Mfg not Colt Defense - it has the rectangular UID label - it has a non-ambi non-“hot dog” selector Love that it’s got a G trigger Clone nerd question — are there periods after “GOVT” and “5.56 MM” on the rollmark? |
|
|
|
|
Posted: 11/4/2018 12:25:08 PM EST
[Last Edit: wissota4]
[#13]
Quote HistoryOriginally Posted By C6H12O6: Very cool. Seems like an old gun: - it’s marked Colt’s Mfg not Colt Defense - it has the rectangular UID label - it has a non-ambi non-“hot dog” selector Love that it’s got a G trigger Clone nerd question — are there periods after “GOVT” and “5.56 MM” on the rollmark? but on "COLT DEFENSE" it's marked "5.56MM" at least in my experience with M4s i've been issued. CD might have a different answer. |
|
|
|
|
Posted: 11/4/2018 12:39:04 PM EST
[#14]
Quote HistoryOriginally Posted By wissota4: On the "COLT'S MFG. CO. INC" it's marked "GOVT." and 5.56 M.M." but on "COLT DEFENSE" it's marked "5.56MM" at least in my experience with M4s i've been issued. CD might have a different answer. CD |
|
|
|
|
Posted: 11/4/2018 12:48:57 PM EST
[#15]
Quote HistoryOriginally Posted By Combat_Diver:
https://www.AR15.Com/media/mediaFiles/32677/IMG_5797_jpg-727321.JPG https://www.AR15.Com/media/mediaFiles/32677/IMG_5798_jpg-727322.JPG CD |
|
|
|
|
Posted: 11/4/2018 1:24:51 PM EST
[#16]
Quote HistoryOriginally Posted By Ivan1:
Is it my eyes that deceive me or are the front takedown holes elongated? |
|
|
|
|
Posted: 11/4/2018 1:25:24 PM EST
[Last Edit: Combat_Diver]
[#17]
Quote HistoryOriginally Posted By Ivan1:
Is it my eyes that deceive me or are the front takedown holes elongated? CD |
|
|
|
TX, USA
|
Posted: 11/4/2018 3:07:26 PM EST
[#18]
Sorry if this has already been discussed here
. Does the surefire m600 work well for the CQBR block ll or am I better off using the m300?
Any one have pics of their M600 so I don’t have to look through all 1100 pages
|
|
|
AZ, USA
|
Posted: 11/4/2018 3:32:02 PM EST
[Last Edit: KLamper]
[#19]
Quote HistoryOriginally Posted By LongTrang:
Anyone know where to find the best deal on a KAC QDSS? I would contact Chuck at Kellyenterprises.net |
|
|
|
Posted: 11/4/2018 5:24:32 PM EST
[#20]
Quote HistoryOriginally Posted By Combat_Diver:
https://www.AR15.Com/media/mediaFiles/32677/IMG_5797_jpg-727321.JPG https://www.AR15.Com/media/mediaFiles/32677/IMG_5798_jpg-727322.JPG CD
|
|
|
|
|
Posted: 11/4/2018 5:34:40 PM EST
[Last Edit: Dyzastr]
[#21]
Quote HistoryOriginally Posted By Bhavin22:
Sorry if this has already been discussed here . Does the surefire m600 work well for the CQBR block ll or am I better off using the m300?
Any one have pics of their M600 so I don't have to look through all 1100 pages  Attached FileWere you lookin for itw pics or pics of builds by members? Or both? I misunderstood.  Attached File |
|
|
|
NC, USA
|
Posted: 11/4/2018 5:52:26 PM EST
[#22]
Went and got everything all zeroed in today.
|
|
|
TX, USA
|
Posted: 11/4/2018 9:09:00 PM EST
[Last Edit: Bhavin22]
[#23]
Quote HistoryOriginally Posted By Dyzastr:
Here ya go. Type in mk18 pic and it pops up every time. One of my favs. All I need is the nt4 and Peq. He's likely using the early head, kl4 or somethin. 200 lumens. https://www.AR15.Com/media/mediaFiles/471387/image_jpeg-727940.JPG Were you lookin for itw pics or pics of builds by members? Or both? I misunderstood.https://www.AR15.Com/media/mediaFiles/471387/image_jpg-728008.JPG BTW Thanks for the mount
|
|
|
|
Posted: 11/4/2018 9:36:45 PM EST
[#24]
Quote HistoryOriginally Posted By Bhavin22:
Thanks for the pictures. Just trying to get a idea of what a M600 (600 lumen) with a gear sector mount would look like. Or if I’m better off using the m300c (500 lumen) BTW Thanks for the mount Quote HistoryOriginally Posted By Bhavin22:
Originally Posted By Dyzastr:
Here ya go. Type in mk18 pic and it pops up every time. One of my favs. All I need is the nt4 and Peq. He's likely using the early head, kl4 or somethin. 200 lumens. https://www.AR15.Com/media/mediaFiles/471387/image_jpeg-727940.JPG Were you lookin for itw pics or pics of builds by members? Or both? I misunderstood.https://www.AR15.Com/media/mediaFiles/471387/image_jpg-728008.JPG BTW Thanks for the mount 
|
|
|
|
TX, USA
|
Posted: 11/4/2018 10:14:01 PM EST
[#25]
Quote HistoryOriginally Posted By MILSPEC556:
@Bhavin22 here's mine stock mount vs gear sector offset. The M300 looks a lot better on an offset mount than the M600 does IMO. But looks doesn't mean shit at the end of the day. FWIW I went back to the factory mount just because I am so used to having my light at 3:00. But the gear sector does tuck it in better https://i.imgur.com/OkEoSvU.jpg https://i.imgur.com/KHLAXSG.jpg https://i.imgur.com/xlrJ34o.jpg |
|
|
|
Posted: 11/4/2018 10:17:27 PM EST
[Last Edit: MILSPEC556]
[#26]
Quote HistoryOriginally Posted By Bhavin22:
Thanks. That was exactly what I was looking for. I see what you mean by the m300 probably looks better on the gear sector. Quote HistoryOriginally Posted By Bhavin22:
Originally Posted By MILSPEC556:
@Bhavin22 here's mine stock mount vs gear sector offset. The M300 looks a lot better on an offset mount than the M600 does IMO. But looks doesn't mean shit at the end of the day. FWIW I went back to the factory mount just because I am so used to having my light at 3:00. But the gear sector does tuck it in better https://i.imgur.com/OkEoSvU.jpg https://i.imgur.com/KHLAXSG.jpg https://i.imgur.com/xlrJ34o.jpg 
|
|
|
|
|
Posted: 11/4/2018 10:36:40 PM EST
[#27]
Either one you go with I'd prob ditch the mount and use that gear sector you got. The thumb screw messes with me at lest. Every grip that felt normal would leave the thumb nut in the way except for the choke hold on a vfg. Keep in mind, with a suppressor, you can get the m600 out a Loy farther than the m300. That's one advantage. And the fact that the m600df can achieve 1500 lumens is pretty cool. I'm sure the m300 is prob about that bright by now. Matter of preference more than anything.
|
|
|
|
|
Posted: 11/4/2018 11:20:08 PM EST
[Last Edit: bryanintexas]
[#28]
Quote HistoryOriginally Posted By H1H0AG:
Had a little range time today. Nice that the weather's improving a bit. https://i.imgur.com/APyYAxV.png https://i.imgur.com/ciHIHHP.jpg 
Oooops... edit for pic 
|
|
|
|
WA, USA
|
Posted: 11/5/2018 11:28:35 AM EST
[#29]
Is Arms Unlimited actually shipping suppressors this time? I was hosed the first time years ago, but they have a super deal on the SOCOM-SB's. Thinking of getting two.
|
|
|
|
Posted: 11/5/2018 11:53:45 AM EST
[#30]
Quote HistoryOriginally Posted By LongTrang:
Is Arms Unlimited actually shipping suppressors this time? I was hosed the first time years ago, but they have a super deal on the SOCOM-SB's. Thinking of getting two. |
|
|
|
WA, USA
|
Posted: 11/5/2018 11:57:17 AM EST
[#31]
Quote HistoryOriginally Posted By C6H12O6: I bought a FDE SOCOM RC from them in late March and it was at my dealer within a few days. |
|
|
|
Posted: 11/5/2018 3:33:56 PM EST
[#32]
Quote HistoryOriginally Posted By LongTrang:
Is Arms Unlimited actually shipping suppressors this time? I was hosed the first time years ago, but they have a super deal on the SOCOM-SB's. Thinking of getting two. |
|
|
|
|
Posted: 11/5/2018 4:39:40 PM EST
[#33]
I know it doesn't belong here, but can't get over the fact that I got an approved Eform form 1 in 10 days for this one.... We Augee'ing now! Sorry about the shadows, garage lighting ain't all it's made up to be.
Eform all of the lowers. No one has an excuse now. 
Waiting on the "definitely not used or shot the shit out of" 212 from AU. Last time I'll be dealing with them. But that's neither here nor there. Back to your regular stuff. 
|
|
|
|
|
Posted: 11/5/2018 4:46:01 PM EST
[#34]
Quote HistoryOriginally Posted By C6H12O6:
I bought a FDE SOCOM RC from them in late March and it was at my dealer within a few days. Quote HistoryOriginally Posted By C6H12O6:
Originally Posted By LongTrang:
Is Arms Unlimited actually shipping suppressors this time? I was hosed the first time years ago, but they have a super deal on the SOCOM-SB's. Thinking of getting two. |
|
|
|
|
Posted: 11/5/2018 4:48:25 PM EST
[Last Edit: BurtSaun1049]
[#35]
Quote HistoryOriginally Posted By KLamper:
I believe KAC went to MAP pricing making it difficult to find decent pricing. I would contact Chuck at Kellyenterprises.net Quote HistoryOriginally Posted By KLamper:
Originally Posted By LongTrang:
Anyone know where to find the best deal on a KAC QDSS? I would contact Chuck at Kellyenterprises.net My buddy SOT is awaiting their transfer on forms currently. Will post in the thread if he approves with price, but what he quoted me was such a stupid good deal, I couldn't pass it up. ETA: per my buddy they are black and were used. He suspects from eyeballing them, pretty low round count. He did tell me they look ugly because of he way they were clamped in the cruisers removed a lot of the finish on them, but sounded to me like nothing a little rattle can or cerakote wont fix. I told him I would buy one, sight unseen. |
|
|
|
|
Posted: 11/5/2018 4:57:50 PM EST
[#36]
Quote HistoryOriginally Posted By vanquishings:
I know it doesn't belong here, but can't get over the fact that I got an approved Eform form 1 in 10 days for this one.... We Augee'ing now! Sorry about the shadows, garage lighting ain't all it's made up to be. Eform all of the lowers. No one has an excuse now. https://farm5.staticflickr.com/4861/30798460297_c392901118_b.jpg Waiting on the "definitely not used or shot the shit out of" 212 from AU. Last time I'll be dealing with them. But that's neither here nor there. Back to your regular stuff. https://farm2.staticflickr.com/1837/43933806101_dae9fb48f0_b.jpg |
|
|
|
|
Posted: 11/5/2018 5:00:34 PM EST
[#37]
Quote HistoryOriginally Posted By wissota4:
I'll do a 10 day wait will you tell me how to do it? Never formed 1 before. Quote HistoryOriginally Posted By wissota4:
Originally Posted By vanquishings:
I know it doesn't belong here, but can't get over the fact that I got an approved Eform form 1 in 10 days for this one.... We Augee'ing now! Sorry about the shadows, garage lighting ain't all it's made up to be. Eform all of the lowers. No one has an excuse now. https://farm5.staticflickr.com/4861/30798460297_c392901118_b.jpg Waiting on the "definitely not used or shot the shit out of" 212 from AU. Last time I'll be dealing with them. But that's neither here nor there. Back to your regular stuff. https://farm2.staticflickr.com/1837/43933806101_dae9fb48f0_b.jpg https://www.ar15.com/forums/Armory/Visual-Guide-How-to-Fill-out-a-Form-1-using-EForms/17-493132/?page=1&anc=5016505#i5016505 I sure hope mine comes back in 10 days :\. Even if I get a background delay, that'd still be waaay less than my last one. |
|
|
|
|
Posted: 11/5/2018 5:01:49 PM EST
[#38]
Quote HistoryOriginally Posted By wissota4:
I'll do a 10 day wait will you tell me how to do it? Never formed 1 before. |
|
|
|
|
Posted: 11/5/2018 5:03:45 PM EST
[#39]
Quote HistoryOriginally Posted By krdt: E-Form... https://www.ar15.com/forums/Armory/Visual-Guide-How-to-Fill-out-a-Form-1-using-EForms/17-493132/?page=1&anc=5016505#i5016505 I sure hope mine comes back in 10 days :\. Even if I get a background delay, that'd still be waaay less than my last one. |
|
|
|
|
Posted: 11/5/2018 5:13:50 PM EST
[#40]
Quote HistoryOriginally Posted By Spooled:
Mine went pending on the first when my prints arrived, I'll be in the colt lower stamped game finally, now which gun to asign it to??? Quote HistoryOriginally Posted By Spooled:
Originally Posted By krdt: E-Form... https://www.ar15.com/forums/Armory/Visual-Guide-How-to-Fill-out-a-Form-1-using-EForms/17-493132/?page=1&anc=5016505#i5016505 I sure hope mine comes back in 10 days :\. Even if I get a background delay, that'd still be waaay less than my last one. |
|
|
|
TX, USA
|
Posted: 11/5/2018 5:15:11 PM EST
[#41]
Wish they had the e file up when I did mine late September
|
|
|
|
Posted: 11/5/2018 6:00:37 PM EST
[#42]
Gentlemen, I present the rare, limited edition "Rainbow Color Change" version of the 4 prong. Only released by Surefire in limited quantities... :D.
|
|
|
|
AZ, USA
|
Posted: 11/5/2018 6:04:39 PM EST
[Last Edit: AZ_SBR]
[#43]
Quote HistoryOriginally Posted By krdt:
Gentlemen, I present the rare, limited edition "Rainbow Color Change" version of the 4 prong. Only released by Surefire in limited quantities... :D. http://wkd.site.nfoservers.com/CQBR/CQBR.110418.Shooting.NS-08.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.110418.Shooting.NS-09.jpg In other news, should I buy a Brownells Retro A1 lower and stamp it to get closer to a MK18 Mod 0 clone instead of my current Daniel Defense DDMK18 factory SBR'd lower? Or no...? |
|
|
USA
|
Posted: 11/5/2018 6:12:35 PM EST
[#44]
Quote HistoryOriginally Posted By vanquishings:
I know it doesn't belong here, but can't get over the fact that I got an approved Eform form 1 in 10 days for this one.... We Augee'ing now! Sorry about the shadows, garage lighting ain't all it's made up to be. Eform all of the lowers. No one has an excuse now. https://farm5.staticflickr.com/4861/30798460297_c392901118_b.jpg |
|
|
|
Posted: 11/5/2018 6:15:16 PM EST
[#45]
Quote HistoryOriginally Posted By AZ_SBR:
JDM burnt Ti version. Cost: 113,000 Japanese Yen. In other news, should I buy a Brownells Retro A1 lower and stamp it to get closer to a MK18 Mod 0 clone instead of my current Daniel Defense DDMK18 factory SBR'd lower? Or no...? Quote HistoryOriginally Posted By AZ_SBR:
Originally Posted By krdt:
Gentlemen, I present the rare, limited edition "Rainbow Color Change" version of the 4 prong. Only released by Surefire in limited quantities... :D. http://wkd.site.nfoservers.com/CQBR/CQBR.110418.Shooting.NS-08.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.110418.Shooting.NS-09.jpg In other news, should I buy a Brownells Retro A1 lower and stamp it to get closer to a MK18 Mod 0 clone instead of my current Daniel Defense DDMK18 factory SBR'd lower? Or no...? |
|
|
|
AZ, USA
|
Posted: 11/5/2018 6:19:35 PM EST
[#46]
Quote HistoryOriginally Posted By krdt:
Are you going to go back to a Wilcox mount?
|
|
|
|
Posted: 11/5/2018 6:22:39 PM EST
[#47]
Quote HistoryOriginally Posted By AZ_SBR:
I already did. This is the build in its current state. I swapped my Colt LE6920 "M4 CARBINE" marked lower to my Block II build. But this DD lower is driving me nuts
https://farm5.staticflickr.com/4859/31835007588_a33ac97d7b_c.jpg Quote HistoryOriginally Posted By AZ_SBR:
Originally Posted By krdt:
Are you going to go back to a Wilcox mount?
https://farm5.staticflickr.com/4859/31835007588_a33ac97d7b_c.jpg https://www.armsunlimited.com/Colt-M16A1-Semi-Auto-Rifle-US-Govt-Property-Marked-p/crm16a1.htm |
|
|
|
|
Posted: 11/5/2018 6:40:14 PM EST
[#48]
So, you gangstas just take a pic of yourself on your phone and email to you computer?
Also what LEO did you add? local PD? |
|
|
|
|
Posted: 11/5/2018 6:48:34 PM EST
[#49]
Quote HistoryOriginally Posted By wissota4:
So, you gangstas just take a pic of yourself on your phone and email to you computer? Also what LEO did you add? local PD? Whoever your local chief law enforcement officer is. I used Sheriff Penzone of the Maricopa County Sheriff's Department. |
|
|
|
|
Posted: 11/5/2018 6:51:10 PM EST
[#50]
Quote HistoryOriginally Posted By wissota4:
So, you gangstas just take a pic of yourself on your phone and email to you computer? Also what LEO did you add? local PD? |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
