User Panel
User Panel
User Panel
|
Posted: 7/19/2020 7:15:03 PM EST
[#1]
Quote HistoryOriginally Posted By 2Keylows: Nice. Lower/markings look good. I wish I would have picked up a BM 80% when they were available. Eta: That Elcan always trips me out lol The elcan gets by  Haha |
|
|
|
|
Posted: 7/19/2020 8:18:01 PM EST
[#2]
 
|
|
|
|
|
Posted: 7/19/2020 10:17:38 PM EST
[#3]
Quote HistoryOriginally Posted By india13c: I always use this, and it works like a charm. Bridge the gap, half upper half rail. https://www.wheelertools.com/gunsmithing-tools/vices-clamps-and-blocks/delta-series-ar-upper-pic-rail-vise-block/156888.html Just bought it! Thanks. |
|
|
|
USA
|
Posted: 7/19/2020 10:29:37 PM EST
[#4]
Quote Historysubtle flex  Nice collection! |
|
|
|
Posted: 7/20/2020 4:39:57 AM EST
[#5]
Quote Historymmm the caramel color on the first one is hot Edit: here is a better shot of the lower in case anyone is wondering how the engraving came out. 
|
|
|
|
VA, USA
|
Posted: 7/20/2020 7:25:19 AM EST
[#6]
What's the general consensus on lower receivers for the CQBR Block II? Is it Colt or bust? I'm trying to get the Form 1 started out in front for my build, but damn I'm seeing stripped M4A1 lowers at $600 bucks! I mean if thats the only clone correct route then I guess its put up or shut up, but I figured I'd ask the gurus' opinion first.
|
|
|
AZ, USA
|
Posted: 7/20/2020 7:36:48 AM EST
[#7]
Quote HistoryOriginally Posted By mra4523: What's the general consensus on lower receivers for the CQBR Block II? Is it Colt or bust? I'm trying to get the Form 1 started out in front for my build, but damn I'm seeing stripped M4A1 lowers at $600 bucks! I mean if thats the only clone correct route then I guess its put up or shut up, but I figured I'd ask the gurus' opinion first. The M4A1 lower is the correct lower but a lot of us run Colt M4 carbine lowers as well. Still hard to get but much more available than the M4A1 lowers. |
|
|
|
Posted: 7/20/2020 7:51:32 AM EST
[Last Edit: SMFdarkangel]
[#8]
Quote HistoryOriginally Posted By Thanos7856: The M4A1 lower is the correct lower but a lot of us run Colt M4 carbine lowers as well. Still hard to get but much more available than the M4A1 lowers. Quote HistoryOriginally Posted By Thanos7856: The M4A1 lower is the correct lower but a lot of us run Colt M4 carbine lowers as well. Still hard to get but much more available than the M4A1 lowers. Ditto. But even those are not 100% correct. Originally Posted By mra4523: What's the general consensus on lower receivers for the CQBR Block II? Is it Colt or bust? I'm trying to get the Form 1 started out in front for my build, but damn I'm seeing stripped M4A1 lowers at $600 bucks! I mean if thats the only clone correct route then I guess its put up or shut up, but I figured I'd ask the gurus' opinion first. Some folks run the Aero, PSD, or PSA "Property of US Govt." lowers. An 80% lower may be the visually closest to an actually M4A1 lower. If you read through this thread, you'll find that opinions are mixed. Technically speaking, a CQBR is just an upper receiver so you can use whatever lower you want. Good luck finding a consensus here...we're all crazy ETA: I suppose you could also use an FN M4 lower...although it might trigger some people here. |
|
|
|
|
Posted: 7/20/2020 8:13:59 AM EST
[#9]
Quote HistoryOriginally Posted By SMFdarkangel: Ditto. But even those are not 100% correct. Some folks run the Aero, PSD, or PSA "Property of US Govt." lowers. An 80% lower may be the visually closest to an actually M4A1 lower. If you read through this thread, you'll find that opinions are mixed. Technically speaking, a CQBR is just an upper receiver so you can use whatever lower you want. Good luck finding a consensus here...we're all crazy ETA: I suppose you could also use an FN M4 lower...although it might trigger some people here. Quote HistoryOriginally Posted By SMFdarkangel: Originally Posted By Thanos7856: The M4A1 lower is the correct lower but a lot of us run Colt M4 carbine lowers as well. Still hard to get but much more available than the M4A1 lowers. Ditto. But even those are not 100% correct. Originally Posted By mra4523: What's the general consensus on lower receivers for the CQBR Block II? Is it Colt or bust? I'm trying to get the Form 1 started out in front for my build, but damn I'm seeing stripped M4A1 lowers at $600 bucks! I mean if thats the only clone correct route then I guess its put up or shut up, but I figured I'd ask the gurus' opinion first. Some folks run the Aero, PSD, or PSA "Property of US Govt." lowers. An 80% lower may be the visually closest to an actually M4A1 lower. If you read through this thread, you'll find that opinions are mixed. Technically speaking, a CQBR is just an upper receiver so you can use whatever lower you want. Good luck finding a consensus here...we're all crazy ETA: I suppose you could also use an FN M4 lower...although it might trigger some people here. I promise not to be triggered unless you use a billet lower, M4E1, MARS-L lower, or Cerakoted lower. IMO. that's the only part that you can't get 100% correct so use whatever you want as long as it looks right. The "Colt M4A1 property marked or nothing" crowd can enjoy their lack of selector stops and safe, fire markings. |
|
|
|
|
Posted: 7/20/2020 8:20:33 AM EST
[#10]
Quote HistoryOriginally Posted By pezboytate: I promise not to be triggered unless you use a billet lower, M4E1, MARS-L lower, or Cerakoted lower. IMO. that's the only part that you can't get 100% correct so use whatever you want as long as it looks right. The "Colt M4A1 property marked or nothing" crowd can enjoy their lack of selector stops and safe, fire markings. 100% this. Use whatever milspec forged lower you enjoy the most. No civilian can legally get this 100% clone correct. |
|
|
|
|
Posted: 7/20/2020 8:40:11 AM EST
[#11]
Quote HistoryOriginally Posted By pezboytate: The "Colt M4A1 property marked or nothing" crowd can enjoy their lack of selector stops and safe, fire markings. Not to mention the obnoxious QR code and cheap laser engraved markings.🤮Personally I find the 2013 model 6920's to be the most aesthetically pleasing. But like other's have duly noted, unless you're extremely wealthy or a SOT, the ability to own the correct Colt receiver is virtually impossible. Your only real choice is deciding which particular flavor of wrong you like best. |
|
|
|
VA, USA
|
Posted: 7/20/2020 9:21:41 AM EST
[#12]
Oh you guys are way more inviting over here as opposed to the MK12 thread. Lowers will get you banished from the clone crowd over there. I'm thinking about just keeping an eye out of a colt m4 carbine lower and rolling with that. If I have to drop a mint of the surefire flash hider I may opt for a cheaper iteration, but I'll cross that bridge when I get there. As far as that flash hider is concerned, does anyone have any advice on acquiring that? I've got a thread on the EE, but outside of that I peeped one on gunbroker, but its sitting at $220 and it appears as if the previous owner beat it up pretty good trying to get it off the barrel.
|
|
|
|
Posted: 7/20/2020 10:21:10 AM EST
[#13]
Quote HistoryOriginally Posted By Kalmar: Not to mention the obnoxious QR code and cheap laser engraved markings.🤮Personally I find the 2013 model 6920's to be the most aesthetically pleasing. But like other's have duly noted, unless you're extremely wealthy or a SOT, the ability to own the correct Colt receiver is virtually impossible. Your only real choice is deciding which particular flavor of wrong you like best. Dude nothing turns me on more than the roll marked m4 lowers in the wild. The displaced aluminum and the inconsistency for some reason pleases me so much. I wish I could replicate that. |
|
|
|
|
Posted: 7/20/2020 10:31:17 AM EST
[#14]
Quote HistoryOriginally Posted By Kalmar: Not to mention the obnoxious QR code and cheap laser engraved markings.🤮Personally I find the 2013 model 6920's to be the most aesthetically pleasing. But like other's have duly noted, unless you're extremely wealthy or a SOT, the ability to own the correct Colt receiver is virtually impossible. Your only real choice is deciding which particular flavor of wrong you like best. Yup that's why I never bother with the US Property marked ones. |
|
|
|
USA
|
Posted: 7/20/2020 2:40:50 PM EST
[#15]
Just got my hands on a stripped colt upper.
Do I rip apart my factory DD upper and replace it with the colt one just to be more correct. Should I replace the pinned gas block with the crane style while I’m at it? Is it worth my time removing all the Allen screws? Help. |
|
|
NC, USA
|
Posted: 7/20/2020 2:44:16 PM EST
[#16]
Quote HistoryOriginally Posted By Flyit14: Just got my hands on a stripped colt upper. Do I rip apart my factory DD upper and replace it with the colt one just to be more correct. Should I replace the pinned gas block with the crane style while I’m at it? Is it worth my time removing all the Allen screws? Help. Yes its worth it. Get to work. |
|
|
|
Posted: 7/20/2020 2:49:32 PM EST
[#17]
Quote HistoryOriginally Posted By JohnnyUtah427: Yes its worth it. Get to work. Quote HistoryOriginally Posted By JohnnyUtah427: Originally Posted By Flyit14: Just got my hands on a stripped colt upper. Do I rip apart my factory DD upper and replace it with the colt one just to be more correct. Should I replace the pinned gas block with the crane style while I’m at it? Is it worth my time removing all the Allen screws? Help. Yes its worth it. Get to work. Yes it is. Make sure you have that extended allen key.  Attached File |
|
|
|
USA
|
Posted: 7/20/2020 2:52:38 PM EST
[Last Edit: Flyit14]
[#18]
Quote HistoryOriginally Posted By UndrGrndPrdcts: Yes it is. Make sure you have that extended allen key. /media/mediaFiles/sharedAlbum/tumblr_lka9rhi8aT1qadbq2o1_400_GIF-121.gif Quote HistoryOriginally Posted By UndrGrndPrdcts: Originally Posted By JohnnyUtah427: Originally Posted By Flyit14: Just got my hands on a stripped colt upper. Do I rip apart my factory DD upper and replace it with the colt one just to be more correct. Should I replace the pinned gas block with the crane style while I’m at it? Is it worth my time removing all the Allen screws? Help. Yes its worth it. Get to work. Yes it is. Make sure you have that extended allen key. /media/mediaFiles/sharedAlbum/tumblr_lka9rhi8aT1qadbq2o1_400_GIF-121.gif I knew it. Got to go find the gas block. Is this what I need? https://www.brownells.com/rifle-parts/gas-system-parts/gas-blocks/ar-15-gas-block-mk12-prod22733.aspx Probably hacking my harbor freight Allen key set for this. |
|
|
|
Posted: 7/20/2020 3:20:55 PM EST
[#19]
Quote HistoryOriginally Posted By Flyit14: I knew it. Got to go find the gas block. Is this what I need? https://www.brownells.com/rifle-parts/gas-system-parts/gas-blocks/ar-15-gas-block-mk12-prod22733.aspx Probably hacking my harbor freight Allen key set for this. Yes that is what you need. |
|
|
|
|
Posted: 7/20/2020 6:04:25 PM EST
[#20]
I had to use a blank to remove the suppressor today.
Two rounds didn't do it, so I plugged the end with a cork and it popped right off.  Anyone with a 10 series Gen3 Su230 care to share their Warranty Date? I'm going to have CLW create another Uid for me, but just wanted to double check the year range for correctness. Based on the 2 pics below I'm going to say 09 would be good to go. Side note: I noticed "902896"(Gen2) and "903215"(Gen3) right before the actual Ser#s, would these numbers be part #s for specific generations of Elcan?  
|
|
|
|
VA, USA
|
Posted: 7/20/2020 7:50:54 PM EST
[#21]
I was just lucky enough to snatch up the surefire 4 prong this evening and the gentleman was telling me that the knights armament lower receiver was also in the wild as well. Anyone ever heard of that? I’m sure the issues (if they were) is actually a full auto version, but I’m sure the knights lower is a much nicer receiver.
|
|
|
|
Posted: 7/20/2020 9:10:56 PM EST
[#22]
Quote HistoryOriginally Posted By 2Keylows: I had to use a blank to remove the suppressor today. Two rounds didn't do it, so I plugged the end with a cork and it popped right off. https://i.imgur.com/pd2OUyJ.jpg Anyone with a 10 series Gen3 Su230 care to share their Warranty Date? I'm going to have CLW create another Uid for me, but just wanted to double check the year range for correctness. Based on the 2 pics below I'm going to say 09 would be good to go. Side note: I noticed "902896"(Gen2) and "903215"(Gen3) right before the actual Ser#s, would these numbers be part #s for specific generations of Elcan? https://i.imgur.com/rf3Fz9Ml.jpg https://i.imgur.com/t4VX7Wr.jpg Ha... can't say I've ever shot mine off. Worst-case, a flat blade screwdriver wrapped in a cotton patch or rag between the collar and the RIS II will pop it right off. Had to use a strap wrench a time or two to get the collar unlocked as well. Admittedly, shooting it off does add a certain touch of drama the screwdriver lacks, though... lol. |
|
|
|
|
Posted: 7/20/2020 9:34:10 PM EST
[#23]
Quote HistoryOriginally Posted By krdt: Ha... can't say I've ever shot mine off. Worst-case, a flat blade screwdriver wrapped in a cotton patch or rag between the collar and the RIS II will pop it right off. Had to use a strap wrench a time or two to get the collar unlocked as well. Admittedly, shooting it off does add a certain touch of drama the screwdriver lacks, though... lol. Quote HistoryOriginally Posted By krdt: Originally Posted By 2Keylows: I had to use a blank to remove the suppressor today. Two rounds didn't do it, so I plugged the end with a cork and it popped right off. https://i.imgur.com/pd2OUyJ.jpg Anyone with a 10 series Gen3 Su230 care to share their Warranty Date? I'm going to have CLW create another Uid for me, but just wanted to double check the year range for correctness. Based on the 2 pics below I'm going to say 09 would be good to go. Side note: I noticed "902896"(Gen2) and "903215"(Gen3) right before the actual Ser#s, would these numbers be part #s for specific generations of Elcan? https://i.imgur.com/rf3Fz9Ml.jpg https://i.imgur.com/t4VX7Wr.jpg Ha... can't say I've ever shot mine off. Worst-case, a flat blade screwdriver wrapped in a cotton patch or rag between the collar and the RIS II will pop it right off. Had to use a strap wrench a time or two to get the collar unlocked as well. Admittedly, shooting it off does add a certain touch of drama the screwdriver lacks, though... lol. Do it like when you release a blowgun off of the air line one-handed and catch it with the other. Point it up in the air and catch it on the way down.
|
|
|
|
|
Posted: 7/20/2020 10:26:07 PM EST
[#24]
Quote HistoryOriginally Posted By SMFdarkangel: Ditto. But even those are not 100% correct. Some folks run the Aero, PSD, or PSA "Property of US Govt." lowers. An 80% lower may be the visually closest to an actually M4A1 lower. If you read through this thread, you'll find that opinions are mixed. Technically speaking, a CQBR is just an upper receiver so you can use whatever lower you want. Good luck finding a consensus here...we're all crazy ETA: I suppose you could also use an FN M4 lower...although it might trigger some people here. I have seen one or two FN marked lowers being used on 10.3" URGs. They reason you don't see more is that Colt M4A1s were issued long before to Groups before FN had the contract. As lowers wear out or get destroyed and replaced, FN lower may get used. FNs have been issued to the Support Battalions in Group also. CD |
|
|
|
NC, USA
|
Posted: 7/21/2020 7:08:20 AM EST
[#25]
Fed the beast some brass this past weekend...
|
|
|
|
Posted: 7/21/2020 8:25:02 AM EST
[#26]
Quote HistoryOriginally Posted By The-Ant1-Liberal: Fed the beast some brass this past weekend... https://i.imgur.com/hHi9Weq.jpg wrong thread |
|
|
|
|
Posted: 7/21/2020 8:31:32 AM EST
[Last Edit: -KentuckyWindage-]
[#27]
Quote HistoryOriginally Posted By The-Ant1-Liberal: Fed the beast some brass this past weekend... https://i.imgur.com/hHi9Weq.jpg  Attached File |
|
|
|
|
Posted: 7/21/2020 9:33:54 AM EST
[#28]
Quote HistoryOriginally Posted By The-Ant1-Liberal: Fed the beast some brass this past weekend... https://i.imgur.com/hHi9Weq.jpg I guess the pmag is correct.. |
|
|
|
|
Posted: 7/21/2020 1:11:55 PM EST
[#29]
Haven’t posted in a while. This has become the main rifle I take out.
 
|
|
|
|
|
Posted: 7/21/2020 1:19:47 PM EST
[#30]
tarheel state firearms is running a special on corncob taupe nt4's right now
use coupon code NT4TAUPE, 1250 shipped buy them up boys! i'm poor right now otherwise i'd jump on it |
|
|
|
|
Posted: 7/21/2020 2:01:22 PM EST
[#31]
Quote HistoryOriginally Posted By SecretSquirell: Do it like when you release a blowgun off of the air line one-handed and catch it with the other. Point it up in the air and catch it on the way down. Quote HistoryOriginally Posted By SecretSquirell: Do it like when you release a blowgun off of the air line one-handed and catch it with the other. Point it up in the air and catch it on the way down. Lol... I've heard you can't be considered Tier 1 until you've done that while walking away slowly from an explosion. Originally Posted By JLAudio: tarheel state firearms is running a special on corncob taupe nt4's right now use coupon code NT4TAUPE, 1250 shipped buy them up boys! i'm poor right now otherwise i'd jump on it Damn, last I checked, that's below dealer cost from most wholesale distributors. If I were gonna get another 5.56 can it'd probably be an RC, but that's a good deal. |
|
|
|
|
Posted: 7/21/2020 2:22:47 PM EST
[#32]
Quote HistoryOriginally Posted By krdt: Ha... can't say I've ever shot mine off. Worst-case, a flat blade screwdriver wrapped in a cotton patch or rag between the collar and the RIS II will pop it right off. Had to use a strap wrench a time or two to get the collar unlocked as well. Admittedly, shooting it off does add a certain touch of drama the screwdriver lacks, though... lol. It was pretty anti climatic lol. It punted itself a yard or so. Maybe a different story with full pressure 556. Good tip though, I need to make it a habit to remove the suppressor after use. Though I'm sure old dirty ammo, high humidity that day and putting it up wet didn't help much either. |
|
|
|
NC, USA
|
Posted: 7/21/2020 2:45:51 PM EST
[#33]
Quote HistoryOriginally Posted By wissota4: I guess the pmag is correct.. All of my USGIs are stashed w/my HKMR556 A1s...
|
|
|
|
Posted: 7/21/2020 9:01:49 PM EST
[#34]
Fur Missiles and Mk18's
  
|
|
|
|
|
Posted: 7/21/2020 9:18:49 PM EST
[#35]
Quote HistoryOriginally Posted By JLAudio: Fur Missiles and Mk18's https://i.imgur.com/mQdE9jL.jpg https://i.imgur.com/F4w6lqv.jpg https://i.imgur.com/uc50ZbY.jpg Those are awesome pics. |
|
|
|
USA
|
Posted: 7/22/2020 4:07:20 PM EST
[Last Edit: Flyit14]
[#36]
Quote HistoryOriginally Posted By JLAudio: Fur Missiles and Mk18's https://i.imgur.com/mQdE9jL.jpg https://i.imgur.com/F4w6lqv.jpg https://i.imgur.com/uc50ZbY.jpg Bag of treats in the dump pouch? Love it. Also anyone know if DD MK 18 barrels have a dimple for a set screw gas block? Or should I just track down a Colt barrel? Or is the DD barrel considered correct (ish)? |
|
|
|
Posted: 7/22/2020 4:43:40 PM EST
[#37]
Quote HistoryOriginally Posted By Flyit14: Bag of treats in the dump pouch? Love it. Also anyone know if DD MK 18 barrels have a dimple for a set screw gas block? Or should I just track down a Colt barrel? Or is the DD barrel considered correct (ish)? Think the newer barrels are dimpled. I use a DD just because it’s a great barrel and I got a crazy good deal. |
|
|
|
|
Posted: 7/22/2020 4:59:03 PM EST
[Last Edit: Zakk_Wylde_470]
[#38]
Quote HistoryOriginally Posted By Bhavin22: Think the newer barrels are dimpled. I use a DD just because it’s a great barrel and I got a crazy good deal. Quote HistoryOriginally Posted By Bhavin22: Originally Posted By Flyit14: Bag of treats in the dump pouch? Love it. Also anyone know if DD MK 18 barrels have a dimple for a set screw gas block? Or should I just track down a Colt barrel? Or is the DD barrel considered correct (ish)? Think the newer barrels are dimpled. I use a DD just because it’s a great barrel and I got a crazy good deal. I use a DD because they know how to make them the correct length ETA: Is Colt the only kosher ambi-selector, or are LMT/KAC also acceptable? |
|
|
|
|
Posted: 7/22/2020 6:19:31 PM EST
[#39]
As far as BCGs go...phosphate only for clone correctness?
|
|
|
|
VA, USA
|
Posted: 7/22/2020 6:50:13 PM EST
[#40]
Quote HistoryOriginally Posted By Zakk_Wylde_470: I use a DD because they know how to make them the correct length ETA: Is Colt the only kosher ambi-selector, or are LMT/KAC also acceptable? I believe the KAC is also kosher. |
|
|
NC, USA
|
Posted: 7/22/2020 7:35:32 PM EST
[#41]
Quote HistoryOriginally Posted By smitty_007: As far as BCGs go...phosphate only for clone correctness? Yes and along with the little “C” on it. |
|
|
|
Posted: 7/22/2020 8:20:14 PM EST
[#42]
Quote HistoryOriginally Posted By Flyit14: Bag of treats in the dump pouch? Love it. Also anyone know if DD MK 18 barrels have a dimple for a set screw gas block? Or should I just track down a Colt barrel? Or is the DD barrel considered correct (ish)? Quote HistoryOriginally Posted By Flyit14: Originally Posted By JLAudio: Fur Missiles and Mk18's https://i.imgur.com/mQdE9jL.jpg https://i.imgur.com/F4w6lqv.jpg https://i.imgur.com/uc50ZbY.jpg Bag of treats in the dump pouch? Love it. Also anyone know if DD MK 18 barrels have a dimple for a set screw gas block? Or should I just track down a Colt barrel? Or is the DD barrel considered correct (ish)? Yes, they are dimpled on current production. As far as correctness, we know at least 1,407 DD 10.3" barrel/bolt combos were shipped to Crane. I think it's fairly safe to assume those replacements were put to use somewhere, and therefore DD barrels have been used on issued guns. For a generic Mk18/CQBR clone, I'd say that's good enough. I use DD barrels on both my Block II CQBRs--although, to be fair, I was using them before I even knew about the Crane acquisition, lol. |
|
|
|
AZ, USA
|
Posted: 7/22/2020 8:59:03 PM EST
[#43]
Quote HistoryOriginally Posted By Zakk_Wylde_470: I use a DD because they know how to make them the correct length ETA: Is Colt the only kosher ambi-selector, or are LMT/KAC also acceptable? KAC is GTG |
|
|
|
Posted: 7/22/2020 9:07:27 PM EST
[#44]
Originally Posted By Soopreme: I believe the KAC is also kosher. Originally Posted By Thanos7856: KAC is GTG This one? https://www.armsunlimited.com/Knights-Semi-Auto-Ambidextrous-Safety-Selector-Kit-p/25776.htm |
|
|
|
TX, USA
|
Posted: 7/22/2020 9:09:31 PM EST
[#45]
Does anyone know if EOTech is still confiscating law guns su-231’s? I’m getting a spot on mine
|
|
|
|
Posted: 7/22/2020 9:26:33 PM EST
[Last Edit: krdt]
[#46]
Quote HistoryOriginally Posted By Zakk_Wylde_470: This one? https://www.armsunlimited.com/Knights-Semi-Auto-Ambidextrous-Safety-Selector-Kit-p/25776.htm Quote HistoryOriginally Posted By Zakk_Wylde_470: Originally Posted By Soopreme: I believe the KAC is also kosher. Originally Posted By Thanos7856: KAC is GTG This one? https://www.armsunlimited.com/Knights-Semi-Auto-Ambidextrous-Safety-Selector-Kit-p/25776.htm FYI, if you want to get really specific, the KAC ambis were only used by MARSOC. |
|
|
|
|
Posted: 7/22/2020 11:40:04 PM EST
[#47]
Quote HistoryOriginally Posted By JohnnyUtah427: Yes and along with the little “C” on it. Quote HistoryOriginally Posted By JohnnyUtah427: Originally Posted By smitty_007: As far as BCGs go...phosphate only for clone correctness? Yes and along with the little “C” on it. Could also have a "F" on it. CD |
|
|
|
|
Posted: 7/23/2020 3:24:06 AM EST
[#48]
Quote HistoryOriginally Posted By Combat_Diver: Could also have a "F" on it. CD Quote HistoryOriginally Posted By Combat_Diver: Originally Posted By JohnnyUtah427: Originally Posted By smitty_007: As far as BCGs go...phosphate only for clone correctness? Yes and along with the little “C” on it. Could also have a "F" on it. CD Just out of curiosity, have you ever happened across any 1B1B6/Toolcraft replacement carriers being used? I know I've heard TC has (or had) a mil contract to supply replacement carriers, but don't recall there being any specific details beyond that. |
|
|
|
|
Posted: 7/23/2020 4:27:34 AM EST
[Last Edit: Combat_Diver]
[#49]
Quote HistoryOriginally Posted By krdt: Just out of curiosity, have you ever happened across any 1B1B6/Toolcraft replacement carriers being used? I know I've heard TC has (or had) a mil contract to supply replacement carriers, but don't recall there being any specific details beyond that. Yes, but only a very small numbers. Majority are Colt or FN. CD |
|
|
|
USA
|
Posted: 7/23/2020 5:32:42 AM EST
[#50]
Guys, quick questions here:
On the Form 1, Question 4D. It says "Model (As marked on firearm). What is the correct answer for this box since AR15 is NOT marked on the Colt gov't property lower i'm using? Next question on the Form 1 is Question 4F: What is the OAL of a SBR with LMT SOPMOD stock, milspec buffer tube, and 10.3" Colt barrel without the muzzle device attached? I'm seeing a bunch of different answers from 27.4" all the way to 29.5" and different answers like add barrel length plus 19" and i don't know what to use. Last question on Form 1 is Question 4H: It says additional Description. Do you guys leave this blank or do you put your Trust name, City & State? I'm filling this out on Eforms so please keep that in mind if it means anything. Thanks. |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
