User Panel
User Panel
User Panel
|
Posted: 8/26/2021 9:41:18 PM EST
[#1]
Quote HistoryOriginally Posted By brodband8: I like how the guy in the last pic went straight for the peq2 Probably trying to finish up his clone build and get it posted on the 'gram. |
|
|
|
|
Posted: 8/26/2021 10:33:53 PM EST
[#2]
Quote HistoryOriginally Posted By AZ_SBR: Probably trying to finish up his clone build and get it posted on the 'gram. Quote HistoryOriginally Posted By AZ_SBR: Originally Posted By brodband8: I like how the guy in the last pic went straight for the peq2 Probably trying to finish up his clone build and get it posted on the 'gram. My pockets would be full |
|
|
|
USA
|
Posted: 8/26/2021 10:52:46 PM EST
[#3]
Quote HistoryOriginally Posted By BePhreed: I’d be willing to bet contractor guns or COTS purchases to furnish a local national force. Commercial parts and the dated PEQs lead me to that conclusion. Could be totally wrong. Yep. A contractor over there a week or two ago made a thread in GD. Said his ar had a dd mk18 upper with a peq-2. Think he said he was using his own optic. |
|
|
|
Posted: 8/26/2021 11:03:29 PM EST
[#4]
Speaking of newly acquired PEQ-2's, I was finally able to get mine today! Craziest thing, a buddy just got back from what he called a vacation and said he had a few spares lying around. Go figure...
For legal reasons I must clarify that the above statement is a joke. I did get it today, but from an entirely legitimate source.  
|
|
|
|
|
Posted: 8/27/2021 1:55:32 AM EST
[#5]
Quote HistoryOriginally Posted By BePhreed: I’d be willing to bet contractor guns or COTS purchases to furnish a local national force. Commercial parts and the dated PEQs lead me to that conclusion. Could be totally wrong. I was thinking the exact same |
|
|
|
USA
|
Posted: 8/27/2021 1:32:30 PM EST
[#6]
I know the Tan Anodized Colt Buffer tube is not Clone correct, but i want to do it so bad.
Would you guys flame me for that OR approve it? OR Should i stick with the black buffer tube since everything else is clone correct right down to my Tan Gen 1 LMT Buttstock ? |
|
|
|
Posted: 8/27/2021 2:01:01 PM EST
[#7]
Quote HistoryOriginally Posted By FastCar: I know the Tan Anodized Colt Buffer tube is not Clone correct, but i want to do it so bad. Would you guys flame me for that OR approve it? OR Should i stick with the black buffer tube since everything else is clone correct right down to my Tan Gen 1 LMT Buttstock ? Non black anodized buffer tubes are gay. |
|
|
|
|
Posted: 8/27/2021 2:06:17 PM EST
[#8]
Quote HistoryOriginally Posted By FastCar: I know the Tan Anodized Colt Buffer tube is not Clone correct, but i want to do it so bad. Would you guys flame me for that OR approve it? OR Should i stick with the black buffer tube since everything else is clone correct right down to my Tan Gen 1 LMT Buttstock ? Black and rattle can is the way CD |
|
|
|
|
Posted: 8/27/2021 2:38:52 PM EST
[#9]
Quote HistoryOriginally Posted By UndrGrndPrdcts: Non black anodized buffer tubes are gay. Quote HistoryOriginally Posted By UndrGrndPrdcts: Originally Posted By FastCar: I know the Tan Anodized Colt Buffer tube is not Clone correct, but i want to do it so bad. Would you guys flame me for that OR approve it? OR Should i stick with the black buffer tube since everything else is clone correct right down to my Tan Gen 1 LMT Buttstock ? Non black anodized buffer tubes are gay.  Attached File |
|
|
|
|
Posted: 8/27/2021 4:46:06 PM EST
[#10]
Quote HistoryOriginally Posted By Dyzastr: https://www.ar15.com/media/mediaFiles/471387/0B7105AB-5541-499D-A495-BF9C7A93980C_jpe-2064029.JPG Sims gun. Looks like fun. |
|
|
|
USA
|
Posted: 8/27/2021 6:25:36 PM EST
[#11]
Quote HistoryOriginally Posted By SecretSquirell: Will probably all end up in the shredder. I'm going to guess anniston for reclamation. There are UID tags in that lot. |
|
|
|
Posted: 8/27/2021 9:44:50 PM EST
[Last Edit: Dyzastr]
[#12]
Quote HistoryOriginally Posted By ringer706: Speaking of newly acquired PEQ-2's, I was finally able to get mine today! Craziest thing, a buddy just got back from what he called a vacation and said he had a few spares lying around. Go figure... For legal reasons I must clarify that the above statement is a joke. I did get it today, but from an entirely legitimate source. https://i.imgur.com/nSZMd8i.jpg
|
|
|
|
|
Posted: 8/27/2021 9:50:51 PM EST
[Last Edit: Dyzastr]
[#13]
Quote HistoryOriginally Posted By FastCar: I know the Tan Anodized Colt Buffer tube is not Clone correct, but i want to do it so bad. Would you guys flame me for that OR approve it? OR Should i stick with the black buffer tube since everything else is clone correct right down to my Tan Gen 1 LMT Buttstock ? Eta-pics for pics sake found another m68 on a block2. Not sure if posted yet (probably was)  Attached File Attached File Attached File“Friends don’t let friends use anything other than black anodized 4 pos receiver extensions.” |
|
|
|
|
Posted: 8/29/2021 2:45:42 PM EST
[Last Edit: Dyzastr]
[#14]
What's the deal with these cheaper "mk12" gas blocks from Potomac armory? Anyone have any experience or knowledge on these?
Mk12 GB Potomac armory (I know, I know, I should avoid linked site, I'm just curious about the gas blocks.) |
|
|
|
|
Posted: 8/29/2021 3:31:59 PM EST
[#15]
Quote HistoryOriginally Posted By Dyzastr: What's the deal with these cheaper "mk12" gas blocks from Potomac armory? Any have any experience or knowledge on these? Potomac mk12 GB (I know, I know, I should avoid linked site, I'm just curious about the gas blocks.) |
|
|
|
|
Posted: 8/29/2021 4:44:24 PM EST
[#16]
|
|
|
|
|
Posted: 8/29/2021 4:55:08 PM EST
[#17]
Quote HistoryOriginally Posted By LsuJon: Very interesting https://www.ar15.com/media/mediaFiles/316069/65D408DD-3C05-43B4-B3BA-D4ED3D75173E_jpe-2071037.JPG Oh fuck, it’s reeeeaaaaalllllll. DD MK18 marked uppers. 
|
|
|
|
|
Posted: 8/29/2021 5:11:13 PM EST
[#18]
Quote HistoryOriginally Posted By -KentuckyWindage-: Oh fuck, it's reeeeaaaaalllllll. DD MK18 marked uppers.
|
|
|
|
|
Posted: 8/29/2021 5:18:39 PM EST
[#19]
Quote HistoryOriginally Posted By LsuJon: Not just marked by DD either, peep the crane serial. Quote HistoryOriginally Posted By LsuJon: Originally Posted By -KentuckyWindage-: Oh fuck, it's reeeeaaaaalllllll. DD MK18 marked uppers. HTF can you even read anything? All I can see is that there's something there. If I didn't know it said "DDMk18", I'd be clueless.
|
|
|
|
|
Posted: 8/29/2021 5:30:19 PM EST
[Last Edit: Dyzastr]
[#20]
Quote HistoryOriginally Posted By LsuJon: Very interesting https://www.ar15.com/media/mediaFiles/316069/65D408DD-3C05-43B4-B3BA-D4ED3D75173E_jpe-2071037.JPG  Eyes forever unclean!Eta-thread is about to flooded with DD factory uppers and I told you so’s. Brace yourselves. |
|
|
|
|
Posted: 8/29/2021 5:46:13 PM EST
[#21]
Quote HistoryOriginally Posted By SecretSquirell: HTF can you even read anything? All I can see is that there's something there. If I didn't know it said "DDMk18", I'd be clueless. |
|
|
|
|
Posted: 8/29/2021 5:55:04 PM EST
[#22]
Quote HistoryOriginally Posted By LsuJon: I think when you upload it's via mobile you loose some quality. On my phone I can make out most of the serial number lol Quote HistoryOriginally Posted By LsuJon: Originally Posted By SecretSquirell: HTF can you even read anything? All I can see is that there's something there. If I didn't know it said "DDMk18", I'd be clueless. Ah, yeah, they're definitely not that high of resolution on my end. |
|
|
|
|
Posted: 8/29/2021 6:06:35 PM EST
[#23]
Quote HistoryOriginally Posted By Dyzastr: I'm sorry but I can't read anything after being blinded by those CQB Hot Pants! Eyes forever unclean!Eta-thread is about to flooded with DD factory uppers and I told you so’s. Brace yourselves. LOL  Those hot pants are what we called UDT shorts. What the SEALs used to wear and what we wore in the Fleet Marines for PT and water OPs. I still have mine but do not wear them and no I won't try them on for you and take a pic either. Sorry no CQBR in the pic.UDT Glamour Shot |
|
|
|
|
Posted: 8/29/2021 6:08:17 PM EST
[#24]
Quote HistoryOriginally Posted By imdBman: LOL Those hot pants are what we called UDT shorts. What the SEALs used to wear and what we wore in the Fleet Marines for PT and water OPs. I still have mine but do not wear them and no I won't try them on for you and take a pic either. Sorry no CQBR in the pic.UDT Glamour Shot |
|
|
|
|
Posted: 8/29/2021 6:55:02 PM EST
[#25]
Quote HistoryOriginally Posted By LsuJon: Not just marked by DD either, peep the crane serial. This might just be pic of the year, well done Sir. |
|
|
|
OH, USA
|
Posted: 8/29/2021 7:18:06 PM EST
[Last Edit: bimmertech87]
[#26]
What’s the best option for a correct ambi colt safety? Anyone have a lead on one?
|
|
|
|
Posted: 8/29/2021 8:43:55 PM EST
[#27]
Quote HistoryOriginally Posted By -KentuckyWindage-: This might just be pic of the year, well done Sir. |
|
|
|
|
Posted: 8/29/2021 9:57:43 PM EST
[#28]
Quote HistoryOriginally Posted By imdBman: LOL Those hot pants are what we called UDT shorts. What the SEALs used to wear and what we wore in the Fleet Marines for PT and water OPs. I still have mine but do not wear them and no I won't try them on for you and take a pic either. Sorry no CQBR in the pic.UDT Glamour Shot Quote HistoryOriginally Posted By imdBman: Originally Posted By Dyzastr: I'm sorry but I can't read anything after being blinded by those CQB Hot Pants! Eyes forever unclean!Eta-thread is about to flooded with DD factory uppers and I told you so's. Brace yourselves. LOL Those hot pants are what we called UDT shorts. What the SEALs used to wear and what we wore in the Fleet Marines for PT and water OPs. I still have mine but do not wear them and no I won't try them on for you and take a pic either. Sorry no CQBR in the pic.UDT Glamour Shot |
|
|
|
CA, USA
|
Posted: 8/30/2021 12:43:30 AM EST
[#29]
Quote HistoryOriginally Posted By jake-cutter: Has anyone received an update or their order for the Surefire 4 prong flash hider from Euro Optics? I came here looking for the same info. I’m going email them tomorrow. I’d like an update too. |
|
|
|
Posted: 8/30/2021 1:45:15 AM EST
[Last Edit: Dyzastr]
[#30]
Quote HistoryOriginally Posted By Theodoric: If it's from Charlie's, who knows. |
|
|
|
|
Posted: 8/30/2021 2:01:56 AM EST
[#31]
Quote HistoryOriginally Posted By bimmertech87: What's the best option for a correct ambi colt safety? Anyone have a lead on one? Mine doesn't like being used w/ a colt trigger though. Causes the bolt to hang on the hammer while racking it on safe. |
|
|
|
|
Posted: 8/30/2021 3:00:01 AM EST
[Last Edit: Combat_Diver]
[#32]
|
|
|
|
OH, USA
|
Posted: 8/30/2021 6:03:41 AM EST
[Last Edit: bimmertech87]
[#33]
Quote HistoryOriginally Posted By LsuJon: Brownells has them from time to time. Mine doesn't like being used w/ a colt trigger though. Causes the bolt to hang on the hammer while racking it on safe. Thanks. I plan on using a geissele ssa-e so hopefully no issues. Any reason a neutered 3 position won’t work? Looks like there are a few in the EE |
|
|
AZ, USA
|
Posted: 8/30/2021 11:05:34 AM EST
[Last Edit: Tyrant556]
[#34]
Combo progress.... thanks CD and @Dyzastr for the inputs earlier...
replaced the MK18's Fixed FS with KAC 99051 (black)... next is to have it's own SF M300C WML.  Stole my PA ACSS LPVO from my other rifle for the Block II...not sure if this is clone acceptable (for now)... Is the A2 Flash Hider clone correct on the Block II or should I use the KAC NT4 FH? I have one reserved for the planned MK18 Mod 0. 
|
|
|
|
Posted: 8/30/2021 11:31:41 AM EST
[Last Edit: Combat_Diver]
[#35]
Quote HistoryOriginally Posted By Tyrant556: Combo progress.... thanks CD and @Dyzastr for the inputs earlier... replaced the MK18's Fixed FS with KAC 99051 (black)... next is to have it's own SF M300C WML. https://i.imgur.com/UjSrvBl.jpg Stole my PA ACSS LPVO from my other rifle for the Block II...not sure if this is clone acceptable (for now)... Is the A2 Flash Hider clone correct on the Block II or should I use the KAC NT4 FH? I have one reserved for the planned MK18 Mod 0. https://i.imgur.com/2nB0NXi.jpg A2 is not clone correct, its either NT4 or SF4P. Now I do know of a SF battalion armorer who did put A2s as he was out of SF4Ps (3 support guns) and they were headed my way where I did have SF4Ps and fixed. This was during the change to URGI's. Teams got the new URGI stuff and BN support guys had their Block 1.5s get upgraded to Block IIs. So during the swap, he ran short a few FHs. That said, just went thru 2700+ pics (twice cause I missed it the first time and know I had it) for you and found it.  Attached FileCD |
|
|
|
AZ, USA
|
Posted: 8/30/2021 12:01:45 PM EST
[Last Edit: Tyrant556]
[#36]
Quote HistoryOriginally Posted By Combat_Diver: A2 is not clone correct either NT4 or SF4P. Now I do know of a SF battalion armorer who did put A2s as he was out of SF4Ps (3 support guns) and they were headed my way where I did have SF4Ps and fixed. This was during the change to URGI's. Teams got the new URGI stuff and BN support guys had their Block 1.5s get upgraded to Block IIs. So during the swap, he ran short a few FHs. That said, just went thru 2500+ pics for you and found it. https://www.ar15.com/media/mediaFiles/32677/IMG_0019_JPG-2071943.JPG CD Quote HistoryOriginally Posted By Combat_Diver: Originally Posted By Tyrant556: Combo progress.... thanks CD and @Dyzastr for the inputs earlier... replaced the MK18's Fixed FS with KAC 99051 (black)... next is to have it's own SF M300C WML. https://i.imgur.com/UjSrvBl.jpg Stole my PA ACSS LPVO from my other rifle for the Block II...not sure if this is clone acceptable (for now)... Is the A2 Flash Hider clone correct on the Block II or should I use the KAC NT4 FH? I have one reserved for the planned MK18 Mod 0. https://i.imgur.com/2nB0NXi.jpg A2 is not clone correct either NT4 or SF4P. Now I do know of a SF battalion armorer who did put A2s as he was out of SF4Ps (3 support guns) and they were headed my way where I did have SF4Ps and fixed. This was during the change to URGI's. Teams got the new URGI stuff and BN support guys had their Block 1.5s get upgraded to Block IIs. So during the swap, he ran short a few FHs. That said, just went thru 2500+ pics for you and found it. https://www.ar15.com/media/mediaFiles/32677/IMG_0019_JPG-2071943.JPG CD Awesome, thanks CD!!! I will replace the A2 FH today with the NT4 FH....and perhaps later with SF4P. |
|
|
|
Posted: 8/30/2021 12:10:57 PM EST
[#37]
Quote HistoryOriginally Posted By Tyrant556: Awesome, thanks CD!!! I will replace the A2 FH today with the NT4 FH....and perhaps later with SF4P. @Tyrant556 On second thought don't do swap a NT4 on it as its a DD M4A1 RIS II FSB that only the Army used. MARSOC never used that rail and they're the only ones with NT4s. Keep it A2 until you get a SF4P. CD |
|
|
|
AZ, USA
|
Posted: 8/30/2021 12:16:42 PM EST
[Last Edit: Tyrant556]
[#38]
Quote HistoryOriginally Posted By Combat_Diver: @Tyrant556 On second thought don't do swap a NT4 on it as its a DD M4A1 RIS II FSB that only the Army used. MARSOC never used that rail and they're the only ones with NT4s. Keep it A2 until you get a SF4P. CD Quote HistoryOriginally Posted By Combat_Diver: Originally Posted By Tyrant556: Awesome, thanks CD!!! I will replace the A2 FH today with the NT4 FH....and perhaps later with SF4P. @Tyrant556 On second thought don't do swap a NT4 on it as its a DD M4A1 RIS II FSB that only the Army used. MARSOC never used that rail and they're the only ones with NT4s. Keep it A2 until you get a SF4P. CD Okay CD, will keep the A2 on it for now until I get another SF4P... BIG Thanks to you brother!!! |
|
|
|
Posted: 8/30/2021 3:06:27 PM EST
[Last Edit: Dyzastr]
[#39]
Some more nt4 love
Pic probably posted a thousand times, still badass. I had that mag/optic combo for a while. Kinda miss it.  Attached Fileta01nsn on a block1. I've also seen this pic many, many times before, but never noticed the dude in the foreground. Is he holding mary ju wanna? Bonus points for cqd vfg!  Attached File Attached File |
|
|
|
|
Posted: 8/30/2021 7:02:25 PM EST
[#40]
|
|
|
|
CA, USA
|
Posted: 8/30/2021 7:21:13 PM EST
[#41]
I have a question that may require a pic, but here goes.
I bought a surplus C marked stripped upper. When I took it to my gun smith he said the gas tube hole is off centered and appeared to have been enlarged. He felt like it could potentially cause reliability issues. I build out my own lowers but I haven’t built uppers so I’m clueless. Can the gas tube hole be to large/off centered cause issues? Thanks |
|
|
|
Posted: 8/30/2021 7:39:00 PM EST
[#42]
Quote HistoryOriginally Posted By RevTEG: I have a question that may require a pic, but here goes. I bought a surplus C marked stripped upper. When I took it to my gun smith he said the gas tube hole is off centered and appeared to have been enlarged. He felt like it could potentially cause reliability issues. I build out my own lowers but I haven’t built uppers so I’m clueless. Can the gas tube hole be to large/off centered cause issues? Thanks Usually, the port in the gas block is significantly larger than the port in the barrel so some misalignment isn't detrimental. You can plug one end of the barrel and blow into the other end of the barrel with the gas block installed. If you can easily pass air, you'll probably be alright. |
|
|
|
|
Posted: 8/30/2021 7:41:26 PM EST
[Last Edit: Dyzastr]
[#43]
Quote HistoryOriginally Posted By RevTEG: I have a question that may require a pic, but here goes. I bought a surplus C marked stripped upper. When I took it to my gun smith he said the gas tube hole is off centered and appeared to have been enlarged. He felt like it could potentially cause reliability issues. I build out my own lowers but I haven't built uppers so I'm clueless. Can the gas tube hole be to large/off centered cause issues? Thanks Just to make sure, is this the hole you are referring to? If so, it could cause the gas key to be misaligned with the gas tube which would cause a stoppage.  Attached File |
|
|
|
|
Posted: 8/30/2021 7:48:51 PM EST
[#44]
Quote HistoryOriginally Posted By Dyzastr: You want the gas tube to be basically held in place by the hole in the receiver so that there is positive engagement every time the bcg comes back. If the gas tube hole is too big, it can cause alignment issues when the bcg comes flying back in. That could lead to a potential disaster if the gas key on the bcg misalign with the gas tube on its way back to the chamber. Just to make sure, is this the hole you are referring to? https://www.ar15.com/media/mediaFiles/471387/BCCBA74C-6052-443A-9A3E-E918FD18EC1A_jpe-2072507.JPG Quote HistoryOriginally Posted By Dyzastr: Originally Posted By RevTEG: I have a question that may require a pic, but here goes. I bought a surplus C marked stripped upper. When I took it to my gun smith he said the gas tube hole is off centered and appeared to have been enlarged. He felt like it could potentially cause reliability issues. I build out my own lowers but I haven't built uppers so I'm clueless. Can the gas tube hole be to large/off centered cause issues? Thanks Just to make sure, is this the hole you are referring to? https://www.ar15.com/media/mediaFiles/471387/BCCBA74C-6052-443A-9A3E-E918FD18EC1A_jpe-2072507.JPG I guess I mis-read the "gas tube hole" part. I was thinking barrel gas port. Doh! 
|
|
|
|
|
Posted: 8/30/2021 7:50:41 PM EST
[#45]
Quote HistoryOriginally Posted By SecretSquirell: I guess I mis-read the "gas tube hole" part. I was thinking barrel gas port. Doh! Quote HistoryOriginally Posted By SecretSquirell: Originally Posted By Dyzastr: Originally Posted By RevTEG: I have a question that may require a pic, but here goes. I bought a surplus C marked stripped upper. When I took it to my gun smith he said the gas tube hole is off centered and appeared to have been enlarged. He felt like it could potentially cause reliability issues. I build out my own lowers but I haven't built uppers so I'm clueless. Can the gas tube hole be to large/off centered cause issues? Thanks Just to make sure, is this the hole you are referring to? https://www.ar15.com/media/mediaFiles/471387/BCCBA74C-6052-443A-9A3E-E918FD18EC1A_jpe-2072507.JPG I guess I mis-read the "gas tube hole" part. I was thinking barrel gas port. Doh! We no read so good.
|
|
|
|
|
Posted: 8/30/2021 7:54:58 PM EST
[#46]
Quote HistoryOriginally Posted By LsuJon: https://www.ar15.com/media/mediaFiles/316069/A39B720D-4305-47D1-8158-3B54FC5B519E_jpe-2072455.JPG |
|
|
|
|
Posted: 8/30/2021 7:55:32 PM EST
[#47]
Quote HistoryOriginally Posted By Dyzastr: I had to reread it after reading your post. I thought maybe I misunderstood too. That's why pics are important. We no read so good.Quote HistoryOriginally Posted By Dyzastr: Originally Posted By SecretSquirell: Originally Posted By Dyzastr: Originally Posted By RevTEG: I have a question that may require a pic, but here goes. I bought a surplus C marked stripped upper. When I took it to my gun smith he said the gas tube hole is off centered and appeared to have been enlarged. He felt like it could potentially cause reliability issues. I build out my own lowers but I haven't built uppers so I'm clueless. Can the gas tube hole be to large/off centered cause issues? Thanks Just to make sure, is this the hole you are referring to? https://www.ar15.com/media/mediaFiles/471387/BCCBA74C-6052-443A-9A3E-E918FD18EC1A_jpe-2072507.JPG I guess I mis-read the "gas tube hole" part. I was thinking barrel gas port. Doh! We no read so good.I hit things with hammers and burn them with torches for a living, reading comprehension isn't a critical skill.
|
|
|
|
CA, USA
|
Posted: 8/30/2021 8:48:55 PM EST
[#48]
Quote HistoryOriginally Posted By Dyzastr: You want the gas tube to be basically held in place by the hole in the receiver so that there is positive engagement every time the bcg comes back. If the gas tube hole is too big, it can cause alignment issues when the bcg comes flying back in. That could lead to a malfunction if the gas key on the bcg misalign with the gas tube on its way back to the chamber. Just to make sure, is this the hole you are referring to? If so, it could cause the gas key to be misaligned with the gas tube which would cause a stoppage. https://www.ar15.com/media/mediaFiles/471387/BCCBA74C-6052-443A-9A3E-E918FD18EC1A_jpe-2072507.JPG Thanks for the reply. Yes, that’s the hole I’m referring to. My apologies for not posting a pic. I think my post count isn’t high enough yet? So, the gas tube hole on the upper I received is off centered with the “x” shape being almost worn into a circle. It’s much larger than my new uppers. The gas tube doesn’t make any contact. If that makes sense? My Gun Smith wouldn’t install it because he didn’t trust it. He felt like the hole had been drilled out in an attempt to “correct” some of the misalignment. For an update, the company I purchased it from is willing to exchange it for me. So that’s cool. |
|
|
CA, USA
|
Posted: 8/30/2021 8:50:26 PM EST
[#49]
Quote HistoryOriginally Posted By Dyzastr: I had to reread it after reading your post. I thought maybe I misunderstood too. That's why pics are important. We no read so good.Thank you for the help. My apologies for not including pics. I’m a newb and think my post count may be to low to post pics? |
|
|
|
Posted: 8/30/2021 10:03:55 PM EST
[#50]
Stolen from Ig.
Check out the Roti Wmx placements and SW mounts. Ngals sprinkled throughout. Cool stuff.    
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File
Attached File
Attached File