User Panel
Originally Posted By Chincy:
Got my stamp back a few weeks ago, and then my OCD kicked in about the complete DD URG. So I ordered the colt goodies and finally got it assembled last night. Still needs a 99051, m3x, and waiting on my suppressor to clear any day now. Thanks to this thread for the empty wallets, but I couldn't be happier. Enjoy. View Quote Not mine https://www.ar15.com/forums/t_7_148/1627529_Insight-MX3-Kit--and-M3.html |
|
|
|
Anything worth doing is worth overdoing. Moderation is for pussies.
"Drugs and alcohol are not my problem - reality is my problem. Drugs and alcohol are my solution." - Russel Brand |
Originally Posted By carmodyh:
...but damn it if that Eotech just doesn't manifest in front of your eye.... View Quote It really does just manifest out of nowhere. Shit is like something out of a fairy tale, lol. I feel like the reticle is so much crisper too, over what it looks like with the naked eye (same thing happens with the 3x magnifier). There does seem to be a glow around it if it's set too high though. |
|
Anything worth doing is worth overdoing. Moderation is for pussies.
"Drugs and alcohol are not my problem - reality is my problem. Drugs and alcohol are my solution." - Russel Brand |
ravage, your photo didn't come though.
|
|
|
|
|
Needs more BEEF EL.
If you have to ask, it's ghetto.. FO! FO full retard. |
Dean Winchester wishes he was this cool
MD, USA
|
Originally Posted By DontBuryMe:
You're going to have to use an image hosting site like Imgur, Flickr or Photobucket. Imgur is the easiest since you don't have to make an account, and you won't lose image quality. View Quote Flickr is the next best, and photobucket is a complete pile of dogshit with their ads now. It's at the point I can't even use the site on my phone anymore because invariably i get forwarded to one of those bullshit "ZOMG YOU HAVE SPYWARE CLICK HERE TO DELETE IT ALL FOREVERS!!!1" spyware/adware sites. and it redirects a dozen times before i can even hit stop and back, so it just keeps reloading the same page. BLUF: use imgur or flickr if you want an easy access account. i'm slowly saving all my stuff from my photobucket so i can burn the shit to the ground. |
Cunnilingus aside, that is fucking awesome.
--secretwheelman Perfection can't be achieved from inside the rattle can. --RTUtah |
Originally Posted By ArmedFerret:
i get forwarded to one of those bullshit "ZOMG YOU HAVE SPYWARE CLICK HERE TO DELETE IT ALL FOREVERS!!!1" spyware/adware sites. and it redirects a dozen times before i can even hit stop and back, so it just keeps reloading the same page. View Quote That's not because of this site |
|
|
Dean Winchester wishes he was this cool
MD, USA
|
|
Cunnilingus aside, that is fucking awesome.
--secretwheelman Perfection can't be achieved from inside the rattle can. --RTUtah |
|
|
|
Joined the forum back around November was looking to build an SBR clone but wasn't sure then found this thread. Started on the Mk18 Mod 0 route and kept seeing everyone's CQBR block 2 builds. Well dang it, decided to do both and few months later and lowered bank account this is what I have so far. Still waiting for my form 1. Open to any critiques, I know there a few more things in need to pick up. Uppers and lower are colt, mk18 barrel is 10.3 colt and CQBR is DD 10.3. I plan on assembling the uppers this weekend and will post more pics. Thanks guys.
https://i.imgur.com/ncoF68K.jpg https://i.imgur.com/9gNhKGS.jpg |
|
|
Looks good! Snag an A1 profile lower for the Mod 0 and begin the wait anew.
|
|
|
|
|
"You're the retarded offspring of five monkeys having butt sex with a fish-squirrel!"
|
|
The top pic is an HK-416A5. It's receiver set, buffer tube, rail, and a couple other parts are anodized in a variant of flat dark earth. Obviously that gun and his buddy's in the pic have geissele rails. I'd assume they're Delta
I agree that the 416 clone game is hazy because they are typically issued to tier one units and a few tier 2 units. The tier on guys have a lot of autonomy in gear selection. Whatever one chooses to build as a "clone" would be an interpretation more than a clone. Just my two pennies. I may be already stating the obvious lol. |
|
|
WTF, MrFrZZ and MILSPEC556 back in the thread?! Crazy!
|
|
|
Originally Posted By CloneDiseased:
WTF, MrFrZZ and MILSPEC556 back in the thread?! Crazy! View Quote Haha been a crazy couple of months for me since November. I sold my house in WV and moved to SC. Actually just got a job offer today so it's been a pretty decent day. Only recently been stalking the site again Been thinking of a block1 build, buuuuuut a recce is tugging at me again Hope all is well brother!! |
|
|
Originally Posted By Raptor83:
Does anyone know for sure when (month/year) EOTech stopped anodizing and started cerkoting the EXPS3-0's? Would it be worth trying to find a used EXPS3-0 (for clone accuracy) that's anodized or are all the issued ones even anodized? View Quote Where did you get this information that the new EXPS3-0's are cerakoted? It makes sense though because all the new Tans ones I have seen look like garbage. The color is dingy and uneven. |
|
|
Originally Posted By MrFrZZ:
Haha been a crazy couple of months for me since November. I sold my house in WV and moved to SC. Actually just got a job offer today so it's been a pretty decent day. Only recently been stalking the site again Been thinking of a block1 build, buuuuuut a recce is tugging at me again Hope all is well brother!! View Quote View All Quotes View All Quotes Originally Posted By MrFrZZ:
Originally Posted By CloneDiseased:
WTF, MrFrZZ and MILSPEC556 back in the thread?! Crazy! Haha been a crazy couple of months for me since November. I sold my house in WV and moved to SC. Actually just got a job offer today so it's been a pretty decent day. Only recently been stalking the site again Been thinking of a block1 build, buuuuuut a recce is tugging at me again Hope all is well brother!! Congrats on the job offer.. |
|
Freedom is not Free..
Gun Gallery 4 Life: "Selling Guns, Changing People's Lives" IG: 2A_Patriots and HotBrass365 / HotBrass365crew |
Originally Posted By HD2006:
Very nice! I couldn't get past my 10.5" barrel either. Mine is also a PSA 10.5" but one of the recent production versions that has FN's logo stamped on the barrel. I sent it to ADCO to have cut to 10.3" and am very happy with it. http://i.imgur.com/8OUKEi6h.jpg View Quote My 10.5 has FN stamped on the barrel as well. Its just these clone guys are all, it needs to be colt, blah blah blah... LOL So now it is a real Colt upper on Noveske Lower... Im sure ill find use for the 10.5. |
|
Live Free or Die
NRA Patron Member |
Always check your 5 and 25 while watching your 6
TX, USA
|
|
|
|
|
Originally Posted By iluvmy86:
I have a question for the folks using the factory Colt 10.3" barrel with the .70 gas port. Have you ever experienced any reliability issues with .223 ammo? I just assembled a new upper and I test fired using factory .223 55 gr and .223 62 gr rounds and the rifle wouldn't cycle for shit. I would be able to get maybe 1-3 rounds and would just stop or i get FTF. I did also test fire using new factory 5.56 62 gr rounds and had little no stoppages. The rifle also was unable to hold bolt open on the last round using both the .223 and 5.56 ammo. Thoughts? View Quote what buffer and spring are you using? If you are rocking an H2 I would try and H buffer... if that doesn't work, a standard CAR buffer should do the trick. Could always try a light weight bolt carrier too. All that said, I usually just shot M193 or M855 from PMC or IMI these days... wold gold shoots at 5.56 pressures as well... my 10.3 / .70 gas port wasn't reliable with .223 throwing a suppressor on it also helps if you have that option |
|
|
Originally Posted By iluvmy86:
I have a question for the folks using the factory Colt 10.3" barrel with the .70 gas port. Have you ever experienced any reliability issues with .223 ammo? I just assembled a new upper and I test fired using factory .223 55 gr and .223 62 gr rounds and the rifle wouldn't cycle for shit. I would be able to get maybe 1-3 rounds and would just stop or i get FTF. I did also test fire using new factory 5.56 62 gr rounds and had little no stoppages. The rifle also was unable to hold bolt open on the last round using both the .223 and 5.56 ammo. Thoughts? View Quote I have had no issues with mine running .223. I have only put about 100 rounds through my barrel since I had it cut down and opened up to .07 by adco. I'm running a spikes t-2 buffer. |
|
|
Originally Posted By carmodyh:
what buffer and spring are you using? If you are rocking an H2 I would try and H buffer... if that doesn't work, a standard CAR buffer should do the trick. Could always try a light weight bolt carrier too. All that said, I usually just shot M193 or M855 from PMC or IMI these days... wold gold shoots at 5.56 pressures as well... my 10.3 / .70 gas port wasn't reliable with .223 throwing a suppressor on it also helps if you have that option View Quote View All Quotes View All Quotes Originally Posted By carmodyh:
Originally Posted By iluvmy86:
I have a question for the folks using the factory Colt 10.3" barrel with the .70 gas port. Have you ever experienced any reliability issues with .223 ammo? I just assembled a new upper and I test fired using factory .223 55 gr and .223 62 gr rounds and the rifle wouldn't cycle for shit. I would be able to get maybe 1-3 rounds and would just stop or i get FTF. I did also test fire using new factory 5.56 62 gr rounds and had little no stoppages. The rifle also was unable to hold bolt open on the last round using both the .223 and 5.56 ammo. Thoughts? what buffer and spring are you using? If you are rocking an H2 I would try and H buffer... if that doesn't work, a standard CAR buffer should do the trick. Could always try a light weight bolt carrier too. All that said, I usually just shot M193 or M855 from PMC or IMI these days... wold gold shoots at 5.56 pressures as well... my 10.3 / .70 gas port wasn't reliable with .223 throwing a suppressor on it also helps if you have that option I'm using a colt H buffer and factory carbine spring in a 6920. I am hoping my NT4 suppressor will be available in the upcoming weeks so maybe that might help. |
|
|
Which hooks are you guys using for cqd mounted slings?
|
|
|
Originally Posted By aaron580:
Which hooks are you guys using for cqd mounted slings? View Quote the ones that look like this. i get them at the local surp store on occasion http://www.vikingtactics.com/product-p/hook.htm |
|
What are you gonna do brother? When 72oz of Cola runs wild on you!
|
|
|
Nice!^
Originally Posted By iluvmy86:
https://www.youtube.com/watch?v=gXSVzijFaC4 View Quote Tried to link for you, but it's set to private. |
|
|
Originally Posted By iluvmy86:
I have a question for the folks using the factory Colt 10.3" barrel with the .70 gas port. Have you ever experienced any reliability issues with .223 ammo? I just assembled a new upper and I test fired using factory .223 55 gr and .223 62 gr rounds and the rifle wouldn't cycle for shit. I would be able to get maybe 1-3 rounds and would just stop or i get FTF. I did also test fire using new factory 5.56 62 gr rounds and had little no stoppages. The rifle also was unable to hold bolt open on the last round using both the .223 and 5.56 ammo. Thoughts? View Quote Strange. I have an all Colt setup with an H2 buffer and it's fired several hundred rounds of wolf gold both suppressed and unsuppressed without a single issue. Extreme underpowered steel? |
|
|
Originally Posted By spermgewehr44:
http://s25.postimg.org/49ftsi0a7/IMG_20170212_124810_835.jpg http://s25.postimg.org/vy2h00nan/IMG_20170212_124729_650.jpg View Quote I want a corn cob... |
|
|
Originally Posted By spermgewehr44:
http://s25.postimg.org/49ftsi0a7/IMG_20170212_124810_835.jpg http://s25.postimg.org/vy2h00nan/IMG_20170212_124729_650.jpg View Quote Pure sex!!! Perfect! |
|
|
Originally Posted By pbjunkiee:
the ones that look like this. i get them at the local surp store on occasion http://www.vikingtactics.com/product-p/hook.htm View Quote For mil/le you can get them for $2.50 here at DSG arms... non mil/le only $5 per... they ship within 24 hours most of the time... top notch company IMHO... They have the CQD forward mount and CQD rear plate in stock as well if you need those HK Snap Hook |
|
|
What are you gonna do brother? When 72oz of Cola runs wild on you!
|
|
you guys see those sf4ps in the ee?
|
|
What are you gonna do brother? When 72oz of Cola runs wild on you!
|
He's had those listed for quite a while both here and on GB. I still need one but that's too rich for my blood.
|
|
|
What sling are most of you guys running? Also, is the front CQD sling mount kosher on a Block 1 with FSB?
|
|
|
Squire
"Our Costa, who art in Wyoming, thy beard come, thy will be done on the range as it is on the internet" ozzie839 I survived ARFbortion2016 and all I got was this stupid sigline |
Originally Posted By SecretSquirell:
I prefer the BFG Vickers padded sling. View Quote I too have had a couple BFG VCAS padded slings on my rifles and they're pretty good. However, I've been following Lucas Botkin and T.Rex Arms for a bit, recently bought their Ragnarok light bearing holster, and I've decided I'm going to try out their Ferro Concepts Slingster. Material seems like it will be more comfortable, the padding has the ability to slide to where you need it, and the price is right. Ferro Concepts Slingster |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.