CAA Micro Roni Information? - Page 13

Armory » Pistol Caliber Carbines

Site Notices

[ARCHIVED THREAD] - CAA Micro Roni Information? (Page 13 of 14)

Posted: 2/23/2019 10:48:01 PM EST

[#1]

Quote History

Quoted:

That, and it looks they also brought back the trigger safety with the Gen 4.

View Quote

I’m gonna order one next week.

I’m not going to suppress it, like I have my IMI Kidon Pistol Conversion or CAA Gear Micro Roni Stabilizer Gen 2.

Posted: 2/28/2019 8:54:29 PM EST

[#2]

Shipping now! Only in black. Other colors in April

https://www.yrsinc.com/en/micro-roni-stab-gen-4-caa-gearup-pdw-converter-for-generation-3-4-5-glock-17-22-31-19-23-32

Posted: 3/1/2019 9:24:12 PM EST

[#3]

After shooting several magazines, I start experiencing FTEs.

G3 Stab 17. Have an early 2 pin G17.3.

Replaced the extractor and all the other internal extractor parts.

The range sessions start off positively then always end with failure.

I don't think it's coming unlocked.

Could the charging handle come loose enough to start affecting the slide cycle?

I need to have a dedicated trouble shooting range session. Shoot the pistol by itself when it starts failing in the chassis.

Posted: 3/1/2019 9:38:55 PM EST

[#4]

Quote History

Quoted:
After shooting several magazines, I start experiencing FTEs.

G3 Stab 17. Have an early 2 pin G17.3.

Replaced the extractor and all the other internal extractor parts.

The range sessions start off positively then always end with failure.

I don't think it's coming unlocked.

Could the charging handle come loose enough to start affecting the slide cycle?

I need to have a dedicated trouble shooting range session. Shoot the pistol by itself when it starts failing in the chassis.

View Quote

While your Glock is locked in the Roni, do you have enough vertical play at the charging handle that it makes contact with the inside of the channel that the handles slide through? If so, the friction/contact may be the culprit.

Posted: 3/2/2019 6:47:51 AM EST

[#5]

Quote History

Quoted:
After shooting several magazines, I start experiencing FTEs.

G3 Stab 17. Have an early 2 pin G17.3.

Replaced the extractor and all the other internal extractor parts.

The range sessions start off positively then always end with failure.

I don't think it's coming unlocked.

Could the charging handle come loose enough to start affecting the slide cycle?

I need to have a dedicated trouble shooting range session. Shoot the pistol by itself when it starts failing in the chassis.

View Quote

How many shots before it starts to fail?

The Glock is lubricated?

Absolutely. Is the bolt handle secure?

Is the gun firing without the CAA Gear Micro Roni Stabilizer ?

The only time I had issues was with a G23 using 40 S&W ammunition.

No issues with a Glock 19 or Glock 23 with a 9 mm Conversion on my part.

I have ordered an MCK. There were issues with the Communist PayPal payment option. F-ing bastards.

Posted: 3/3/2019 11:14:32 AM EST

[#6]

Quote History

Quoted:

While your Glock is locked in the Roni, do you have enough vertical play at the charging handle that it makes contact with the inside of the channel that the handles slide through? If so, the friction/contact may be the culprit.

View Quote

Hmmm. I can move my CH up and down to where it touches the rail.

Is it not suppose to? If not, what is the fix?

Having issues only when using the 30rnd mags.

Posted: 3/4/2019 12:50:12 AM EST

[#7]

So what’s the consensus on the Micro Roni vs the MCK?

Looks like the MCK is cheaper at some places

Posted: 3/4/2019 4:13:10 PM EST

[#8]

Quote History

Quoted:
So what’s the consensus on the Micro Roni vs the MCK?

Looks like the MCK is cheaper at some places

View Quote

I ordered one even though I have a Gen 2 CAA Gear Micro Roni Stabilizer and a IMI Kidon Pistol Conversion.

I ordered directly from CAA GEAR (Command Arms) which priced a backpack and MCK for $300.

Posted: 3/4/2019 4:50:32 PM EST

[#9]

Quote History

Quoted:

I ordered one even though I have a Gen 2 CAA Gear Micro Roni Stabilizer and a IMI Kidon Pistol Conversion.

I ordered directly from CAA GEAR (Command Arms) which priced a backpack and MCK for $300.

View Quote

How do you like it vs the Gen 2?

I got impulsive and ordered the MCK from Rainier because Im horrible at waiting

Posted: 3/5/2019 12:30:26 PM EST

[#10]

Are the CAA lights worth getting to save the limited rail space, or am I better off just putting my Tlr-1 on it?

Posted: 3/5/2019 2:17:32 PM EST

[#11]

Quoted:
Are the CAA lights worth getting to save the limited rail space, or am I better off just putting my Tlr-1 on it?

View Quote

I like the light, plenty bright and easy to use, and frees up the rail for a Laser...

Posted: 3/5/2019 4:07:04 PM EST

[#12]

I have the CAA light on mine. Operating the switch takes a little getting used to, but not horrible. I wanted to keep my Roni slim and light so the CAA light helps keep it that way.

Posted: 3/5/2019 4:18:57 PM EST

[#13]

Quote History

Quoted:

I like the light, plenty bright and easy to use, and frees up the rail for a Laser...

https://i.imgur.com/j5eeoH9.jpg?1
https://i.imgur.com/O87JZSP.jpg?1

View Quote

Is that the Magpul magwell on there?

Posted: 3/5/2019 8:22:17 PM EST

[#14]

Quoted:

Is that the Magpul magwell on there?

View Quote

Yes it is..

Posted: 3/5/2019 9:50:17 PM EST

[#15]

Quote History

Quoted:

Yes it is..

View Quote

How do you like it? Looking at ordering one to go with my incoming MCK

Posted: 3/5/2019 10:33:53 PM EST

[#16]

Quote History

Quoted:

How do you like it vs the Gen 2?

I got impulsive and ordered the MCK from Rainier because Im horrible at waiting

View Quote

My Gen 4 hasn’t come in yet.

I love the Gen 2 but I have modified it for Suppressor.

Posted: 3/5/2019 11:02:36 PM EST

[#17]

Quoted:

How do you like it? Looking at ordering one to go with my incoming MCK

View Quote

works well...I like it.

Posted: 3/6/2019 10:50:48 PM EST

[#18]

Quote History

Quoted:

How many shots before it starts to fail?

The Glock is lubricated?

Absolutely. Is the bolt handle secure?

Is the gun firing without the CAA Gear Micro Roni Stabilizer ?

The only time I had issues was with a G23 using 40 S&W ammunition.

No issues with a Glock 19 or Glock 23 with a 9 mm Conversion on my part.

I have ordered an MCK. There were issues with the Communist PayPal payment option. F-ing bastards.

View Quote

Took her out today.

When I got the 17 originally, I changed out the RSA. Seemed really strong. Put the one it came with back in and really lubed it thoroughly. Almost immediately it felt better just racking it by hand.

Shot it with 6 different magazines. Even a suspect 17 round LEO/GOV ban magazine worked.

Zero failures with Federal Brass. Slide locked back when empty.

Feeling better about it now.

Posted: 3/7/2019 7:47:13 AM EST

[#19]

Quoted:

Took her out today.

When I got the 17 originally, I changed out the RSA. Seemed really strong. Put the one it came with back in and really lubed it thoroughly. Almost immediately it felt better just racking it by hand.

Shot it with 6 different magazines. Even a suspect 17 round LEO/GOV ban magazine worked.

Zero failures with Federal Brass. Slide locked back when empty.

Feeling better about it now.

View Quote

What is a RSA?

Posted: 3/7/2019 7:51:03 AM EST

[#20]

Quote History

Quoted:

What is a RSA?

View Quote

Recoil spring assembly.

Posted: 3/7/2019 8:24:16 PM EST

[#21]

What does everyone use to transport their Micro Roni? I've got a hard case, but I've been looking for a dual use backpack.

Posted: 3/7/2019 9:35:01 PM EST

[#22]

Quote History

Quoted:
What does everyone use to transport their Micro Roni? I've got a hard case, but I've been looking for a dual use backpack.

View Quote

I’m going to be carrying mine in a Hazard 4 Patrol bag I use for work

Posted: 3/7/2019 10:15:34 PM EST

[#23]

Cheapo Midway USA bag on got on sale.

Posted: 3/7/2019 10:24:05 PM EST

[#24]

Quote History

Quoted:
What does everyone use to transport their Micro Roni? I've got a hard case, but I've been looking for a dual use backpack.

View Quote

I ordered an MCK CAA Gear Micro Roni Stabilizer with a backpack. I’ll let you know how it works out.

Posted: 3/7/2019 10:24:37 PM EST

[#25]

Just saw this on FB....

https://www.facebook.com/1108386839270600/posts/1904586539650622/

Posted: 3/11/2019 9:40:50 AM EST

[#26]

What is the laser setup you have and did you have issues zeroing it? I bought an MCK and tried with a Truglo Micro I had laying around (to keep it slim as well), but there's not enough adjustment to get it to work.

Posted: 3/11/2019 6:40:44 PM EST

[#27]

Quote History

Quoted:
I like the light, plenty bright and easy to use, and frees up the rail for a Laser...

View Quote

What is the laser setup you have on your Micro Roni, and did you have issues zeroing it? I bought an MCK and tried with a Truglo Micro I had laying around, with the same idea of keeping it as slim as possible so I can still use the CAA Flashlight, but there's not enough adjustment to the Windage/Elevation to get it to zero. Don't know if it has to do with the picatinny rails being so distant to the barrel.

Posted: 3/11/2019 9:42:54 PM EST

[#28]

Laser max
Had it on a rifle.
Had plenty of adjustment

Posted: 3/12/2019 2:34:14 PM EST

[#29]

Quote History

Quoted:
Laser max
Had it on a rifle.
Had plenty of adjustment

View Quote

Thanks!!

Posted: 3/13/2019 8:08:18 PM EST

[#30]

Attached File

I love it!!!

Posted: 3/13/2019 8:21:08 PM EST

[#31]

Very nice, but those sights..

Posted: 3/13/2019 9:09:06 PM EST

[#32]

Quote History

Quoted:
Very nice, but those sights..

View Quote

Posted: 3/14/2019 11:26:21 AM EST

[#33]

I didn't even notice I put the front sight on backwards.

I am low-speed, high-drag though!!!!

(FWIW, I would have figured it out eventually. Maybe)

Posted: 3/14/2019 11:53:23 AM EST

[#34]

Quote History

Quoted:
I didn't even notice I put the front sight on backwards.

I am low-speed, high-drag though!!!!

(FWIW, I would have figured it out eventually. Maybe)

View Quote

Bra, I was just bust’n ur balls. Congrats on the Roni and Welcome to the sickness!!

Posted: 3/14/2019 12:56:57 PM EST

[#35]

Quote History

Quoted:
I didn't even notice I put the front sight on backwards.

I am low-speed, high-drag though!!!!

(FWIW, I would have figured it out eventually. Maybe)

View Quote

Rear sight is on backwards too

Love the FDE. I just got my MCK last night, but I got the black one because I couldnt find the FDE or OD anywhere in stock and I dont have the most patience, so black it was

Posted: 3/14/2019 2:03:30 PM EST

[#36]

Just got this thing in. Stuck a mildly worked over factory gray gen4 19 in it, lipseys exclusive with the cerakoted slide.
Wish it folded left so I could fire it folded. Also it’s a tad weird as I can’t reach mag release or slide catch with right hand. I’ll be ordering the light for it, may just buy a dedicated gun for it maybe 23.
For fun

Attached File

Posted: 3/16/2019 5:35:37 PM EST

[#37]

Anyone get the new g4 stab with interchangeable afg/mag holder from yrs inc?

Posted: 3/17/2019 10:26:05 AM EST

[#38]

Quote History

Quoted:
Anyone get the new g4 stab with interchangeable afg/mag holder from yrs inc?

View Quote

I ordered mine weeks ago direct from CAA GEAR (Command Arms) but there’s a backlog of the backpack which is holding up my order.

Posted: 3/23/2019 4:28:05 PM EST

[#39]

I ordered mine from YRS a couple days ago after I confirmed that angled grip/mag holder did not make the platform AOW (great thread everyone). Just wondering, does anyone know if that wep light holder underneath the barrel shroud will fit other flashlights?

Posted: 3/23/2019 9:07:31 PM EST

[#40]

Quote History

Quoted:
I ordered mine from YRS a couple days ago after I confirmed that angled grip/mag holder did not make the platform AOW (great thread everyone). Just wondering, does anyone know if that wep light holder underneath the barrel shroud will fit other flashlights?

View Quote

Here's a link to a upgraded 900 lumen light: https://www.thefirearmblog.com/blog/2018/04/23/caa-micro-roni-olight-flashlight-upgrade/

Posted: 3/25/2019 6:45:12 PM EST

[#41]

I finally got my MCK.

So my questions are these.

With Suppressor height sights, my Glock is not clicking into place. I think it’s not compatible.

With my Glock 19X everything fits (Glock rail into handle, and rails click into place), but it has a lot of resistance with pulling back the bolt handle.

What is going wrong here?

Posted: 3/25/2019 7:52:47 PM EST

[#42]

I realized that my Suppressor sights won’t work.

Since I have 4 Glock 19 and 1 17 Glock pistols, I put one in a CAA Gear Micro Roni Stabilizer and one in a IMI Kidon Pistol Conversion,and used a Glock 19 for my MCK CAA Gear Micro Roni Stabilizer.

The Glock 19X fit but the slide wouldn’t work. So I took a Gen 4 Glock 19 and removed the sights.

Now the bolt cycles perfectly. I don’t know why it doesn’t cycle with sights on the slide.

Posted: 3/25/2019 8:44:18 PM EST

[#43]

Quote History

Quoted:

Here's a link to a upgraded 900 lumen light: https://www.thefirearmblog.com/blog/2018/04/23/caa-micro-roni-olight-flashlight-upgrade/

View Quote

hsig thank you, that was helpful - those olights aren't much cheaper on Amazon so I may as well just order from YRS or CAA. Mine just shipped from Tel Aviv so it looks like maybe another 2-weeks or so before I get mine!

Posted: 3/25/2019 9:23:10 PM EST

[#44]

Still awesome

Attached File

Posted: 4/2/2019 3:20:08 PM EST

[#45]

I just bought the new gen 4 stab from yrsinc recently for my gen 5 glock 17 and am waiting for it to arrive. Now I'm kind of nervous that my Trijicon HD night sights (GL101O) may not work with the micro roni since it is a bit larger and moves more towards the rear than the factory glock sights and may not fit in the charging handle. I know suppressor sights don't work but does anyone have any issues with these or any other night sights?

Posted: 4/2/2019 9:28:48 PM EST

[#46]

Just got my gen 4 Micro Roni yesterday (a little over a week ship-time), and it fits perfectly around my Glock 19.4 FS pistola. My post count isn't up so I can't post pics of my new toy. This is the link to the one I just got. YRS Micro Roni Gen4

Ergos are great, can't wait to get it out to the range. I decided to use my cheapo pistol light instead of that Roni light. Man, from the ready to presentation, this gets me on target so quickly and effortlessly. Makes my Zenith Z5RS SBR feel unwieldy. If you guys have questions about this unit let me know and I'll contribute...

Posted: 4/3/2019 6:41:04 AM EST

[#47]

Quote History

Quoted:
Just got my gen 4 Micro Roni yesterday (a little over a week ship-time), and it fits perfectly around my Glock 19.4 FS pistola. My post count isn't up so I can't post pics of my new toy. This is the link to the one I just got. YRS Micro Roni Gen4

Ergos are great, can't wait to get it out to the range. I decided to use my cheapo pistol light instead of that Roni light. Man, from the ready to presentation, this gets me on target so quickly and effortlessly. Makes my Zenith Z5RS SBR feel unwieldy. If you guys have questions about this unit let me know and I'll contribute...

View Quote

Are you using any aftermarket night sights on your glock?

Posted: 4/3/2019 2:20:58 PM EST

[#48]

gopeder111,

I'm using the stock polymer sights on my G19.4 FS. Here's what I observe though wrt vertical clearance - your rear sights should be fine, there seems to be alot of clearance between the top of my stock sight and the ceiling of the enclosure. The front sight however is different, the front of the slide fits into a slot with a cutout for the sight. There is maybe about 2-3 millimeters of clearance, as I eyeball the gap. How much taller is your Triji front sight than the stock one?