User Panel
User Panel
User Panel
|
Posted: 8/4/2021 5:55:00 AM EDT
[Last Edit: sgwlower]
[#1]
Quote HistoryOriginally Posted By Blanco_Diablo: That is not bad at all...I think I'll be happy. Thank you! ETA: another question. I know my Mark 4 is calibrated for 168gr ammo, of which I have a little bit for zeroing when my lower gets done. But do you guys exclusively shoot 168gr out of your guns? Can I still expect good accuracy out to 800yd with considerably less expensive M80 spec ammo? I've never understood the idea of putting 87 octane pump gas into a Ferrari......but I get it, everyone's got to try it once! But in my experience, my ECC opens up to at the smallest a 2 moa gun with m80 ball, vs a sub moa gun with match. |
|
|
|
|
Posted: 8/4/2021 7:40:07 AM EDT
[#2]
Quote HistoryOriginally Posted By Blanco_Diablo: ETA: another question. I know my Mark 4 is calibrated for 168gr ammo, of which I have a little bit for zeroing when my lower gets done. But do you guys exclusively shoot 168gr out of your guns? Can I still expect good accuracy out to 800yd with considerably less expensive M80 spec ammo? Run quality 168gr or 175gr Match through it and see which it favors. Also try M118LR if you can source it. Don't put bullshit M80 blaster ammo through your precision rig. It's a highly unrealistic expectation if you think you're going to consistently group well with it. |
|
|
|
|
Posted: 8/4/2021 10:39:16 AM EDT
[Last Edit: Slu54]
[#3]
Quote HistoryOriginally Posted By Blanco_Diablo: That is not bad at all...I think I'll be happy. Thank you! ETA: another question. I know my Mark 4 is calibrated for 168gr ammo, of which I have a little bit for zeroing when my lower gets done. But do you guys exclusively shoot 168gr out of your guns? Can I still expect good accuracy out to 800yd with considerably less expensive M80 spec ammo? You should try to hit anything close to man-size with precision with M80 that far. You'll quickly find it's cheaper per hit to use match ammo. Totally different example, I was trying to dot a 10" plate with M193 out of a 10" AR. This was just at 300yds. I couldn't hit anything. I thought there was no way I could be missing this bad, switched to a MK262 clone out of 16" and pinged every time. Ammo to a gun is like tires on a car, makes a huge difference. |
|
|
|
|
Posted: 8/4/2021 10:52:00 AM EDT
[#4]
Wow that's crazy. Let me preface all this that I'm pretty alright out to 300 but I have close to no experience shooting past that other than on a M240L or M2A1
 . So my long range experience is almost nothing. I always assumed that M80 was a decently accurate cartridge but I will skip it and spend the extra to feed the gun quality match ammo. Thanks guys! Hopefully I'll be able to post pics of my complete rifle soon
|
|
|
|
|
Posted: 8/4/2021 6:19:04 PM EDT
[#5]
I've got some M80 but it's only for functional checks/optic rough-in/I-have-no-ammo-left-and-need-to-shoot-something ammo. Milsurp M118LR does better out of my EMC than either flavor of FGMM though.
|
|
|
|
|
Posted: 8/5/2021 7:56:32 PM EDT
[#6]
Quote HistoryOriginally Posted By sgwlower: I've never understood the idea of putting 87 octane pump gas into a Ferrari......but I get it, everyone's got to try it once! But in my experience, my ECC opens up to at the smallest a 2 moa gun with m80 ball, vs a sub moa gun with match. Same for my 14.5CC |
|
|
|
VA, USA
|
Posted: 8/9/2021 8:16:11 AM EDT
[Last Edit: mra4523]
[#7]
M110 came home from PSD over the weekend. Couldn't be happier with the result. The MK11 and M110 cans are hopefully sprung soon. I need to start working on scopes. I'm thinking Nightforce for the Mod 0 and a Schmidt and Bender for the M110.
|
|
|
|
Posted: 8/9/2021 8:36:29 AM EDT
[#8]
Quote HistoryOriginally Posted By mra4523: M110 came home from PSD over the weekend. Couldn't be happier with the result. The MK11 and M110 cans are hopefully sprung soon. I need to start working on scopes. I'm thinking Nightforce for the Mod 0 and a Schmidt and Bender for the M110. https://live.staticflickr.com/65535/51367216853_36c0992a3e_h.jpg That 110 looks great man. Congrats! |
|
|
|
|
Posted: 8/9/2021 9:18:07 AM EDT
[#9]
Quote HistoryOriginally Posted By mra4523: M110 came home from PSD over the weekend. Couldn't be happier with the result. The MK11 and M110 cans are hopefully sprung soon. I need to start working on scopes. I'm thinking Nightforce for the Mod 0 and a Schmidt and Bender for the M110. https://live.staticflickr.com/65535/51367216853_36c0992a3e_h.jpg That is a killer pair! |
|
|
|
|
Posted: 8/9/2021 5:44:33 PM EDT
[#10]
Quote HistoryOriginally Posted By mra4523: M110 came home from PSD over the weekend. Couldn't be happier with the result. The MK11 and M110 cans are hopefully sprung soon. I need to start working on scopes. I'm thinking Nightforce for the Mod 0 and a Schmidt and Bender for the M110. https://live.staticflickr.com/65535/51367216853_36c0992a3e_h.jpg I can see a bit of color difference between the panels and the rifle. How close do they match in person? |
|
|
|
|
Posted: 8/9/2021 5:47:49 PM EDT
[#11]
Quote HistoryOriginally Posted By mra4523: M110 came home from PSD over the weekend. Couldn't be happier with the result. The MK11 and M110 cans are hopefully sprung soon. I need to start working on scopes. I'm thinking Nightforce for the Mod 0 and a Schmidt and Bender for the M110. https://live.staticflickr.com/65535/51367216853_36c0992a3e_h.jpg Beautiful. |
|
|
|
|
Posted: 8/9/2021 6:22:38 PM EDT
[#12]
Quote HistoryOriginally Posted By mra4523: M110 came home from PSD over the weekend. Couldn't be happier with the result. The MK11 and M110 cans are hopefully sprung soon. I need to start working on scopes. I'm thinking Nightforce for the Mod 0 and a Schmidt and Bender for the M110. https://live.staticflickr.com/65535/51367216853_36c0992a3e_h.jpg Love everything about this! |
|
|
|
VA, USA
|
Posted: 8/9/2021 6:26:16 PM EDT
[#13]
Quote HistoryOriginally Posted By SecretSquirell: I can see a bit of color difference between the panels and the rifle. How close do they match in person? There’s definitely some difference there, but the lighting is really over selling it here. It’s closer to the difference in color with the body and the grip. |
|
|
|
Posted: 8/9/2021 6:42:41 PM EDT
[#14]
Quote HistoryOriginally Posted By mra4523: There’s definitely some difference there, but the lighting is really over selling it here. It’s closer to the difference in color with the body and the grip. Quote HistoryOriginally Posted By mra4523: Originally Posted By SecretSquirell: I can see a bit of color difference between the panels and the rifle. How close do they match in person? There’s definitely some difference there, but the lighting is really over selling it here. It’s closer to the difference in color with the body and the grip. Gotcha. Thanks. I like the darker shades of FDE, but the clone-correct color is lighter so I'm torn. They should have spec'd Field Drab.
|
|
|
|
|
Posted: 8/9/2021 8:07:19 PM EDT
[#15]
Quote HistoryOriginally Posted By mra4523: M110 came home from PSD over the weekend. Couldn't be happier with the result. The MK11 and M110 cans are hopefully sprung soon. I need to start working on scopes. I'm thinking Nightforce for the Mod 0 and a Schmidt and Bender for the M110. https://live.staticflickr.com/65535/51367216853_36c0992a3e_h.jpg 
|
|
|
|
WA, USA
|
Posted: 8/10/2021 1:27:24 PM EDT
[#16]
For a guy who doesn't use Facebook. Is there an option out there that will allow me to get ahold of a Marvin Pitts M110 contour barrel?
|
|
|
VA, USA
|
Posted: 8/10/2021 1:41:15 PM EDT
[#17]
Quote HistoryOriginally Posted By LongTrang: For a guy who doesn't use Facebook. Is there an option out there that will allow me to get ahold of a Marvin Pitts M110 contour barrel? Yes sir shoot an email over to Beth. She handles all of his orders. Be patient though, they’re not the quickest to respond. [email protected] |
|
|
WA, USA
|
Posted: 8/10/2021 1:42:41 PM EDT
[#18]
Quote HistoryOriginally Posted By mra4523: Yes sir shoot an email over to Beth. She handles all of his orders. Be patient though, they’re not the quickest to respond. [email protected] Thank you! |
|
|
|
Posted: 8/11/2021 2:19:53 PM EDT
[#19]
Quote HistoryOriginally Posted By mra4523: Yes sir shoot an email over to Beth. She handles all of his orders. Be patient though, they’re not the quickest to respond. [email protected] ^This. If you going in understanding and expecting this, then you're good. People who don't know how Marvin works tend to get pissed off. These small operations tend to not have a robust staff of people answering inquiries all day, and I suspect they get a lot of BS correspondence and have to answer a bunch of silly ass questions all the time. Just have to bear with them. |
|
|
|
VA, USA
|
Posted: 8/11/2021 2:41:31 PM EDT
[#20]
Quote HistoryOriginally Posted By Blackfoot_7: ^This. If you going in understanding and expecting this, then you're good. People who don't know how Marvin works tend to get pissed off. These small operations tend to not have a robust staff of people answering inquiries all day, and I suspect they get a lot of BS correspondence and have to answer a bunch of silly ass questions all the time. Just have to bear with them. I'll also add that once Beth invoices you for a barrel, as long as they're in stock which they are right now, they get it shipped out very quickly. I think Nackley over at NS Defense either has some Nefarious M110 and MK11 Mod 0 barrels or is getting another batch in soon. Either way folks have options now. |
|
|
IA, USA
|
Posted: 8/12/2021 10:01:25 AM EDT
[#21]
Is there a different kac latch that uses the smaller roll pin that can be swapped to the m110 gas busters that OP recently sold?
|
|
|
|
Posted: 8/12/2021 7:17:54 PM EDT
[Last Edit: SecretSquirell]
[#22]
Quote HistoryOriginally Posted By TigerHawk: Is there a different kac latch that uses the smaller roll pin that can be swapped to the m110 gas busters that OP recently sold? https://i.imgur.com/AF374HR.jpg My factory EMC ('11-'12 ish production date) handle uses the same pin as the M110 ch. I grabbed one of the OP ones the other day too and thought about swapping the latch because that small one sucks. Are you the only owner of that ch/rifle? If not, I wonder if someone broke the pin and just drilled it out to accept a larger one. ETA: I just noticed the roll pin in the rear...what's up with that? Never seen that before. 
|
|
|
|
|
Posted: 8/12/2021 7:30:16 PM EDT
[Last Edit: brodband8]
[#23]
|
|
|
|
IA, USA
|
Posted: 8/12/2021 8:06:18 PM EDT
[#24]
Quote HistoryOriginally Posted By SecretSquirell: My factory EMC ('11-'12 ish production date) handle uses the same pin as the M110 ch. I grabbed one of the OP ones the other day too and thought about swapping the latch because that small one sucks. Are you the only owner of that ch/rifle? If not, I wonder if someone broke the pin and just drilled it out to accept a larger one. ETA: I just noticed the roll pin in the rear...what's up with that? Never seen that before. https://www.ar15.com/media/mediaFiles/204916/20210812_181429-2050304.jpg Quote HistoryOriginally Posted By SecretSquirell: My factory EMC ('11-'12 ish production date) handle uses the same pin as the M110 ch. I grabbed one of the OP ones the other day too and thought about swapping the latch because that small one sucks. Are you the only owner of that ch/rifle? If not, I wonder if someone broke the pin and just drilled it out to accept a larger one. ETA: I just noticed the roll pin in the rear...what's up with that? Never seen that before. https://www.ar15.com/media/mediaFiles/204916/20210812_181429-2050304.jpg I don't think it was drilled at all because it's the same on the charging handle from my ECR special release gun. The one on the left in the first photo is from a EMC delta gun. The roll pin on the back of the charging handle limits the rearward movement of the latch and seems to prevent the latch from hitting the main body of the charging handle when it's depressed. Again it's on the ECR charging handle too. Originally Posted By brodband8: https://www.ar15.com/media/mediaFiles/283538/E06AB52F-292E-4BA8-817C-F35C6D0E13A7_jpe-2050324.JPG real m110 Is this from a newer M110 deployment package gun? I notice it has the same latch as the one from Operation Parts.  |
|
|
|
Posted: 8/13/2021 1:45:05 AM EDT
[#25]
|
|
|
|
|
Posted: 8/13/2021 8:36:33 PM EDT
[#26]
 Doing Rooftop-Asian things 
|
|
|
|
|
Posted: 8/14/2021 2:02:52 PM EDT
[#27]
 Just picked up the lower from my local shop. They said they would get the cerakote "as close as they could" so I can't be mad about it not quite matching. Not a huge deal. Maybe I'll just camo it at some point This rifle is SO BADASS! I've only ever shot one once in the Army and that was without a scope (had one in the shop for repair). I can't wait to see what this thing can do. Wasn't sure about the ACS before but I absolutely love it now that I see it all together. Hopefully I can still call it a clone
|
|
|
|
|
Posted: 8/14/2021 3:38:13 PM EDT
[#28]
Quote HistoryOriginally Posted By Blanco_Diablo: https://i.ibb.co/8NRprQr/20210814-134939.jpg Just picked up the lower from my local shop. They said they would get the cerakote "as close as they could" so I can't be mad about it not quite matching. Not a huge deal. Maybe I'll just camo it at some point This rifle is SO BADASS! I've only ever shot one once in the Army and that was without a scope (had one in the shop for repair). I can't wait to see what this thing can do. Wasn't sure about the ACS before but I absolutely love it now that I see it all together. Hopefully I can still call it a clone Looks great to me. Far closer than I can say mine is. |
|
|
|
|
Posted: 8/15/2021 1:52:04 PM EDT
[#29]
Quote HistoryOriginally Posted By Blanco_Diablo: https://i.ibb.co/8NRprQr/20210814-134939.jpg Just picked up the lower from my local shop. They said they would get the cerakote "as close as they could" so I can't be mad about it not quite matching. Not a huge deal. Maybe I'll just camo it at some point This rifle is SO BADASS! I've only ever shot one once in the Army and that was without a scope (had one in the shop for repair). I can't wait to see what this thing can do. Wasn't sure about the ACS before but I absolutely love it now that I see it all together. Hopefully I can still call it a clone Looks awesome. |
|
|
|
|
Posted: 8/15/2021 2:28:22 PM EDT
[Last Edit: Blanco_Diablo]
[#30]
Thanks guys! The color is a little more noticeable in-doors and in person but it's really not bad. I'm happy with it. Still can't believe I own this
  ETA: I'm going to need a suppressor eventually *facepalm* stupid guns...
|
|
|
|
|
Posted: 8/15/2021 2:32:35 PM EDT
[#31]
Quote HistoryOriginally Posted By MNRidesHonda: https://i.imgur.com/TYHO6hH.jpg Doing Rooftop-Asian things https://i.imgur.com/gNHY7aX.jpg Really need a "like" button on this site. |
|
|
|
|
Posted: 8/15/2021 10:18:27 PM EDT
[#32]
In Kabul during evac
https://www.ar15.com/forums/General/Contractor-on-the-ground-at-Kabul-AMA-/5-2478681/?page=8 Retouched by xerxes2695 to show detail 
|
|
|
|
|
Posted: 8/16/2021 2:53:44 PM EDT
[#33]
Quote HistoryOriginally Posted By Tejas1836: In Kabul during evac https://www.ar15.com/forums/General/Contractor-on-the-ground-at-Kabul-AMA-/5-2478681/?page=8 Retouched by xerxes2695 to show detail https://www.ar15.com/media/mediaFiles/474441/AA9A0A88-491D-4DAE-BD55-7A936DAFE762-205-2054508.jpg Very cool. SR25 always on the front lines. |
|
|
|
|
Posted: 8/30/2021 6:13:52 PM EDT
[#34]
Cool to see the 4-16 ATACR on the M-110:
|
|
|
|
|
Posted: 8/30/2021 11:51:48 PM EDT
[#35]
Quote HistoryOriginally Posted By wayfaerer320: Cool to see the 4-16 ATACR on the M-110: https://i.insider.com/5bf43454c9570102250b32e2?width=1000&format=jpeg&auto=webp Those 4-16 ATACR's are awesome, I've got one on my Remington CSR, I bet it's perfect for the M110 or M110K1. Slight thread derail, here's my CSR with ATACR, it's a Mil-Spec version like the one that Coast Guard guy is using:   |
|
|
|
|
Posted: 9/2/2021 1:28:10 PM EDT
[Last Edit: Great_Balls_of_Fire]
[#36]
Quote HistoryOriginally Posted By USMCSGT0331: Those 4-16 ATACR's are awesome, I've got one on my Remington CSR, I bet it's perfect for the M110 or M110K1. Slight thread derail, here's my CSR with ATACR, it's a Mil-Spec version like the one that Coast Guard guy is using: https://i.imgur.com/XkQ5bNO.jpeg https://i.imgur.com/OiH4MVV.jpeg Can confirm. The 4-16 ATACR is the way to roll on the 16" - 22" rifles. 
|
|
|
|
|
Posted: 9/8/2021 8:08:11 AM EDT
[#37]
|
|
|
|
|
Posted: 9/8/2021 3:37:37 PM EDT
[#38]
Originally Posted By Blanco_Diablo: https://www.ar15.com/media/mediaFiles/68140/20210904_123955_jpg-2082667.JPG This thing is way more accurate than I am...and so much fun  Originally Posted By Great_Balls_of_Fire: Can confirm. The 4-16 ATACR is the way to roll on the 16" - 22" rifles. https://live.staticflickr.com/65535/51418997152_ab918ca113_b.jpg |
|
|
|
|
Posted: 9/8/2021 7:10:31 PM EDT
[#39]
Quote HistoryOriginally Posted By Blanco_Diablo: https://www.ar15.com/media/mediaFiles/68140/20210904_123955_jpg-2082667.JPG This thing is way more accurate than I am...and so much fun I really need to paint mine. |
|
|
|
|
Posted: 9/9/2021 10:34:57 AM EDT
[#40]
 Attached FileFinally got my M110K1 all together, next to my friend's M110K3. Just waiting on my 762QDC to get out of jail and it'll be complete! |
|
|
|
CA, USA
|
Posted: 9/9/2021 10:45:54 AM EDT
[#41]
Those are sweet!
|
|
|
CA, USA
|
Posted: 9/9/2021 10:46:31 AM EDT
[#42]
Found on r/Tacticalgear
|
|
|
|
Posted: 9/9/2021 12:23:32 PM EDT
[#43]
Quote HistoryOriginally Posted By TheBrokePilot: Found on r/Tacticalgear https://preview.redd.it/u4rn2x1to4m71.jpg?width=960&crop=smart&auto=webp&s=29a3b14508a49f2d39e91832ee8bcd909d4ef256 This. |
|
|
|
|
Posted: 9/9/2021 9:15:54 PM EDT
[Last Edit: Slu54]
[#44]
Quote HistoryOriginally Posted By TheBrokePilot: Found on r/Tacticalgear https://preview.redd.it/u4rn2x1to4m71.jpg?width=960&crop=smart&auto=webp&s=29a3b14508a49f2d39e91832ee8bcd909d4ef256 The peq on the bolt gun with only a day optic seems useless. |
|
|
|
|
Posted: 9/10/2021 11:07:45 AM EDT
[#45]
USAF w/ Surefire suppressor:
  |
|
|
|
|
Posted: 9/10/2021 2:35:45 PM EDT
[#46]
Quote HistoryOriginally Posted By wayfaerer320: USAF w/ Surefire suppressor: https://preview.redd.it/t7exndxj2b171.png?width=500&format=png&auto=webp&s=fb6088f2e3b942e02f21f2e523db466f72e50862 https://i.imgur.com/4bFKDiu.png  Attached File |
|
|
|
IA, USA
|
Posted: 9/10/2021 2:49:58 PM EDT
[#47]
Quote HistoryOriginally Posted By wayfaerer320: USAF w/ Surefire suppressor: https://preview.redd.it/t7exndxj2b171.png?width=500&format=png&auto=webp&s=fb6088f2e3b942e02f21f2e523db466f72e50862 https://i.imgur.com/4bFKDiu.png Never seen those before! Nice. Any idea what surefire muzzle device and suppressor that is? |
|
|
|
Posted: 9/10/2021 6:23:53 PM EDT
[#48]
Quote HistoryOriginally Posted By wayfaerer320: USAF w/ Surefire suppressor: https://preview.redd.it/t7exndxj2b171.png?width=500&format=png&auto=webp&s=fb6088f2e3b942e02f21f2e523db466f72e50862 https://i.imgur.com/4bFKDiu.png 'Tater pic resolution, but is the lower on the one in the case a non-ambi? If so, I can clone that one with my EMC. It's even got the same non-railed gas block. 
|
|
|
|
|
Posted: 9/10/2021 6:44:07 PM EDT
[Last Edit: Tejas1836]
[#49]
Quote HistoryOriginally Posted By TheBrokePilot: Found on r/Tacticalgear https://preview.redd.it/u4rn2x1to4m71.jpg?width=960&crop=smart&auto=webp&s=29a3b14508a49f2d39e91832ee8bcd909d4ef256 Anyone know what bike that is? Looks like a hellofa battery |
|
|
|
|
Posted: 9/10/2021 6:48:12 PM EDT
[#50]
Quote HistoryOriginally Posted By Tejas1836: Anyone know what bike that is? Looks like a hellofa battery Quote HistoryOriginally Posted By Tejas1836: Originally Posted By TheBrokePilot: Found on r/Tacticalgear https://preview.redd.it/u4rn2x1to4m71.jpg?width=960&crop=smart&auto=webp&s=29a3b14508a49f2d39e91832ee8bcd909d4ef256 Anyone know what bike that is? Looks like a hellofa battery Sur Ron X |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File
