User Panel
User Panel
User Panel
|
Posted: 5/26/2006 6:46:16 PM EST
[Last Edit: Stickman]
We may as well get a picture thread started. Before and after pictures are great, but sadly, I tend to forget the "before" pictures......
 Here is one of my first refinishing ventures. The upper receiver is Norrells grayish black, while is Norrells Matte black/ SOCOM. 
|
|
|
|
KS, USA
|
Posted: 5/26/2006 9:35:13 PM EST
[#1]
Here is my refinishing contribution. It was done with Krylon ultra flat Khaki. I scuffed the surface, degreased the parts, painted and baked it all in the oven. It is decent durability wise so far. I would like to get it done professionally some day but for now this will do. (I didnt bake the scope or the pistol grip).
The second one is also Krylon ultra flat spray paint, prepaired in the same way. The first pics are right out of the oven.     |
|
|
|
Posted: 5/29/2006 6:37:02 PM EST
[#2]
tag
|
|
|
|
|
Posted: 5/29/2006 7:57:25 PM EST
[#3]
Before
 After Duracoat coyote brown  It's been done for a year or so now, it's holding up well. |
|
|
|
|
Posted: 5/29/2006 8:54:35 PM EST
[Last Edit: kells81]
[#4]
Norrels OD Green,
  
|
|
|
|
|
Posted: 5/30/2006 9:28:28 AM EST
[Last Edit: moosemcnally]
[#5]
  [img=img172.imageshack.us/img172/4763/dsc00966yj0.jpg] [img=img257.imageshack.us/img257/5158/benswdlnd1vm4.jpg] [img=img257.imageshack.us/img257/1132/dsc00962ew2.jpg] I Figure I'll ad this for the folks who are looking for a bunch of pics without a bunch of talk!!! Duracoat: OD Green, Woodland tan, Woodland Brown, Flat black. Duracoat flat clear over the top. Bulldogarms templates |
|
|
|
|
Posted: 5/30/2006 7:29:01 PM EST
[#6]
Very nice job!!
|
|
|
|
|
Posted: 5/31/2006 8:33:13 PM EST
[#7]
Norrell's new Glossy Black on a 30 Round Thompson mag.
 
|
|
|
|
|
Posted: 6/1/2006 1:22:13 PM EST
[#8]
Heres a quick one to start, I'll try to get some more up later. ABS barrel with stainless areas, larue block, and vortex sprayed with colt grey duracoat. Stock, pistol grip, eotech and bottom rail panel duracoated also.
 
|
|
|
|
|
Posted: 6/2/2006 12:14:19 AM EST
[#9]
This was my first to attempts with moly resin a couple of years ago...
 A few rifles later these two where about six months ago...   Now I'm starting to play around with duracoat...  It's the same SBR as above I just got an itch one day to make it black again. |
|
|
|
CA, USA
|
Posted: 6/2/2006 11:01:30 PM EST
[#10]
So is it difficult to do a camo pattern with the norrell's? I haven't seen too many examples, actually your's are the first. Did you use any kind of decal style pattern like duracoat sells?
I'm just wondering how difficult it would be to do all the different colors/patterns while curing it all. Do you wait until all colors are on before the final baking? |
|
|
|
Posted: 6/3/2006 12:40:53 AM EST
[#11]
Ya with norrels you need to cure each color before the next goes on otherwise colors will blend together. As far as templates: I tried it once on a bolt rifle. I wasn't really happy with the results. If I had taken more time I probably would have gotten the look I was going for. I just couldn't see investing the time. For digital or 'busy" camo patterns I'd recomend duracoat. It's just alot easier when it comes to templates IMO. So for norrels I stick with freehand camo paterns with no sharp edges. |
||
|
|
|
Posted: 6/8/2006 7:58:09 PM EST
[Last Edit: infsqdldr]
[#12]
od duracoat
   gonna do a beowulf and .223 upper soon. |
|
|
|
OH, USA
|
Posted: 6/13/2006 4:35:26 PM EST
[#13]
If I knew how to post pics, I would show off my new SBR build that I just did in flat dark earth KG Gun Kote..
|
|
|
|
Posted: 6/13/2006 7:14:55 PM EST
[#14]
t
|
|
|
|
OH, USA
|
Posted: 6/18/2006 12:20:28 PM EST
[#15]
DuraCoat in Sniper Green. Testors airbrush. I initially applied this too heavy since I have never sprayed anything before. Duracoat dries very fast. I'm going to do some mags in HK Black next.
 |
|
|
|
Posted: 6/18/2006 5:52:01 PM EST
[Last Edit: HKgnnr]
[#16]
Duracoated S&W Model 36 Chiefs Special - Grey Wolf frame, Matte Black cylinder.
Before:  After: 
|
|
|
|
MI, USA
|
Posted: 6/19/2006 1:16:05 AM EST
[#18]
Before:
 After: All were done with Duracoat over Parkerizing. The AK was done by CCR, the AR's were done by The Gun Garage. The reason for refinishing them was that they all had some light rusting (my fault....dessicant was saturated and they were in a damp place in a drafty gun cabinet.) I have a real safe now in a better place, so no more worries.   DW |
|
|
OH, USA
|
Posted: 6/19/2006 1:48:25 AM EST
[#19]
That is some amazing stuff.... the second picture top rifle is so camo'd it doesnt even look like an AR anymore...
|
|
|
NM, USA
|
Posted: 6/28/2006 9:51:01 AM EST
[#20]
Did you use a template for that or did you freehand it? Also, what is your opinion on sandblasting prior to Duracoating. Looks great by the way. |
|
|
|
|
Posted: 6/28/2006 2:12:00 PM EST
[#21]
Springer Champ before-
 After, using Norrell's Colt Gray-Black on the frame and Norrell's Flat Black on the slide and small parts. 
|
|
|
|
NM, USA
|
Posted: 6/28/2006 8:19:12 PM EST
[#22]
Well I have decided to take a chance at will be Duracoating an AK this weekend (Along with a couple others; SKS, Glock and another AK)
I will post some before pictures now and then some prep and finish pics. The process I plan to use is heavily degrease all metallic items with Gun Scrubber. Place in over at 110f for awhile, let cool and degrease again. Blast with a sandblaster do remove any flaky blueing and take out some nicks. Spray in a nifty homemade spraybooth I am planning on building. Cross fingers and hope for the best. Here are the before pics. of the AK. Will add more of the other weapons as they become available. http://www.swheath.com/weapons/3.jpg The weapon prior to breakdown. http://www.swheath.com/weapons/9.jpg Picture 2 prior http://www.swheath.com/weapons/4.jpg Breakdown prior to blasting. More to come. |
|
|
|
Posted: 6/29/2006 7:35:10 PM EST
[#23]
TEASE!!!!!!!!!!!!!!!!!!! |
||
|
|
IN, USA
|
Posted: 7/1/2006 6:29:28 PM EST
[#24]
|
|
|
CT, USA
|
Posted: 7/2/2006 1:09:16 PM EST
[#25]
Kimber TLE II with Swedish K duracoat frame.
|
|
|
NM, USA
|
Posted: 7/4/2006 1:28:48 AM EST
[#26]
Here is some pics of a Glock 27 that I recently Duracoated. It's a weapon Iv'e had for 10+ years and was looking a little worn so I hit the frame and slide with Woodland Tan and the accent parts with flat black.
Hope you like it. http://www.swheath.com/weapons/g27.1.jpg http://www.swheath.com/weapons/g27.2.jpg Let me know what you think. |
|
|
HI, USA
|
Posted: 7/4/2006 2:00:45 AM EST
[#27]
Here's some of mine using KG gunkote:
   |
|
|
NM, USA
|
Posted: 7/4/2006 2:03:14 AM EST
[#28]
Well there really isn't any plae to post pics. of an SKS so I thought I would through this in.
It is a Czech SKS with a 24" barrel. I took it and added a Choate machine Dragnuv stock, bipod, am installing a 4x12-50mm scope but need to get the holes for the Choate SKS Scope mount tapped first. Had some minor problems with flaking on the stock but the Duracoat stuck well otherwise. I used woodlan tan, coyote brown, tiger stripe green and matte black. I then tried to custom mix the colors a little bit more what I was looking for. Overall I am happy with it but will go back and touch up some spots and try and get rid of the flame pattern. Let me know what you think of it. Here is the striaght out of the box weapon http://www.swheath.com/weapons/SKS1.jpg Here it is after refinishing http://www.swheath.com/weapons/SKS.10.jpg And as some like to say "In it's native environment". http://www.swheath.com/weapons/SKS.4.jpg http://www.swheath.com/weapons/SKS.7.jpg |
|
|
NM, USA
|
Posted: 7/4/2006 2:04:42 AM EST
[Last Edit: Tested]
[#29]
It's a little different but I like it. I'm getting more into the two tone ones.
Good job.hug.gif |
|
|
|
CA, USA
|
Posted: 7/4/2006 10:07:08 AM EST
[#30]
Remember, it would always be a good idea to reveal the brand as well as the color you used on your guns, in case you inspire someone... |
||
|
|
HI, USA
|
Posted: 7/5/2006 7:01:16 PM EST
[Last Edit: Dragonfly228]
[#31]
Here's anonther one I did with KG gunkote. My stainless Ruger MkIII that I redid in OD and Black:
|
|
|
|
Posted: 7/5/2006 11:03:36 PM EST
[#32]
I'm not very goodat this kind of stuff, but a friend of mine had a Egyptian AK that got submerged during Katrina. He didn't have a lot to put in to it so I took it on as a project.
The wood was toast...  I too steel wool ti everything then degreased it all. Heated it with a paint remover and sprayed it with flat black Krylon then baked it on with the heat gun.  Did a couple of "pretty things" like filling in the sight markings and fire controll lever with white. Put on some cheapo green furniture, replaced the gas tube, put a rail on the left side for a light and added a one point sling.   I was pleased as was my friend |
|
|
|
HI, USA
|
Posted: 7/6/2006 7:07:00 PM EST
[Last Edit: Dragonfly228]
[#33]
Another OD and Black KG gunkote job for a friends Browning high power:
|
|
|
NM, USA
|
Posted: 7/7/2006 2:46:53 PM EST
[Last Edit: Tested]
[#34]
I like that one. I might do my Ruger 10/22 this weekend. |
|
|
|
NM, USA
|
Posted: 7/7/2006 2:49:18 PM EST
[#35]
You did a great job on it. Looks like you put some serious time into that one. How does pre-heating the metal help with it? |
|
|
|
|
Posted: 7/7/2006 3:04:16 PM EST
[#36]
Thanks...it's the weapons work I am most proud of (I know it's not much). preheating the metal is supposed to make it bond better. It seems to work. |
||
|
|
TX, USA
|
Posted: 7/8/2006 3:48:02 PM EST
[#37]
Just completed my first build & Refinish project.
Used KG Kote, Titanium Gray and Foliage Green. Both ended up being a little lighter than I expected, but I'm still happy with the results. Thanks for all the help!   
|
|
|
NM, USA
|
Posted: 7/9/2006 11:06:50 AM EST
[#38]
I was admiring that one in the AR forum. Looks like it came out very nice. |
|
|
|
TX, USA
|
Posted: 7/13/2006 12:15:48 PM EST
[#39]
Here's a couple I have done.
My carry S&W M37. The steel parts were starting to rust up some, grey Duracoat. http://i47.photobucket.com/albums/f178/bqnestle/2tone4.jpg Old School Nelspot paintball gun. http://i47.photobucket.com/albums/f178/bqnestle/toddnelspot1.jpg Key to a good finish is surface prep. Sorry they aren't AR's, hopefully soon I'll have a few of them up here too. Brad |
|
|
HI, USA
|
Posted: 7/14/2006 12:50:57 PM EST
[Last Edit: Dragonfly228]
[#40]
Just finished this KG kote job for a home schooling mom who wanted something...different. The pink color is a custom mix of satin red and flat white. I still need to clean it up here and there and I was trying out different rail cover configurations. The pictures are a bit dark (making the pink look a bit more red) but I had to do it at night indoors. I will replace it with better pictures if I get a chance to.
  
|
|
|
PHL
|
Posted: 7/14/2006 10:10:08 PM EST
[#41]
|
|
|
|
|
Posted: 7/14/2006 11:30:55 PM EST
[#42]
Thanks very much. I did disassemble it beyond the typical field stripping to paint it. Here is a link to a site that has some decent directions for total disassembly. http://www.alpharubicon.com/mrpoyz/glock/ There really is no need to strip down the firing pin as it is a small part that is easily lost and a pain to reassemble.. I stripped it down to where the pins and such that I wanted black would be separate from the part I wanted Tan. I then airbrushed several coats of Woodland Tan Duracoat on the frame and then airbrushed Flat Black Duracoat (wear painting gloves, my fingernails are still tan and black) on the smaller parts so that they would have a new finish. Wait 2 hours between coats so that the layers can dry and begin the polymerization/epoxy process. Waiting overnight or baking prior to reassembly would have been a good idea but I am to impatient for that. Duracoating the G27 really was fun and I am looking forward to spiffing up some of my other weapons with worn down finishes.  |
|||
|
|
PHL
|
Posted: 7/15/2006 12:04:13 AM EST
[#43]
I checked the link you gave me, very helpful indeed. Thanks.
|
|
|
HI, USA
|
Posted: 7/17/2006 1:19:09 PM EST
[#44]
This one I did with Alumahyde II. The pattern is my own, and I call it dragon stripe.
|
|
|
|
Posted: 7/18/2006 4:14:31 PM EST
[#45]
here's my first camo job.....
 and here's my last......  HUNTER. |
|
|
|
IA, USA
|
Posted: 7/19/2006 3:17:59 PM EST
[Last Edit: MarkRSims]
[#46]
.jpg) .jpg) Norrells Green/Grey on the Lower, Upper, Charging Handle, Front sight base, Handguard caps, Delta Ring and Flash Hider. I finished this the other day. My first refinishing job and my first complete AR15 build, from a complete tear down and all used parts except the barrel and the handguards. I thought it was going to turn out way too green, but when I started putting on the stocks, barrel, and controls, which I left parkerized, you could really start to see more of the grey. The grass in the lower picture brings out the green too. It really turned out nice. By the way, the only session at the range I've had time for, forty rounds went to point of aim at 25 then 100 yards with no changes to the sights and with no malfunctions. I think I got lucky |
|
|
USA
|
Posted: 7/20/2006 12:14:02 AM EST
[Last Edit: History_Prof]
[#47]
Just a boring ol' Black Rifle. Nothing fancy. It is a DuraCoat Black Oxide Lower and Rock River Arms original finish upper. The lower is an old Eagle Arms (before they bought the Armalite name) receiver, which had been finished in “Colt Grey.” Only the lower, the part of the buffer tube that is showing, and the buttstock have been refinished. I was attempting to match the RRA finish. When I hold it in various light, I can see a difference between the Rock River finish and the DuraCoat. However, it is largely trivial.
http://i103.photobucket.com/albums/m151/history_prof/e4705d55.jpg http://i103.photobucket.com/albums/m151/history_prof/5bc3c5ab.jpg |
|
|
|
Posted: 7/21/2006 4:13:09 PM EST
[Last Edit: DM1975]
[#48]
Well here is my BBQ pistol, or the beginning of it at least. It is just a cheap ass Rock Island Arms but it is spot on acurate and reliable with all HP's so far. I took some steel off around the mag release and under the trigger guard and rounded the front strap out a bit more and refinished the bottom with...... you guessed it.... KRYLON!!!!! I have alot more to do to this pistol... beaver tail grip, extended thumb safety, light rail, bobbed hammer, night sights, and maybe a guide rod. I will probably also refinish the bottom in coyote later on but for now Krylon is the king...
Oh, and I did the grips myself also but this is all about the refinishing   
|
|
|
|
HI, USA
|
Posted: 7/21/2006 6:00:59 PM EST
[Last Edit: Dragonfly228]
[#49]
Here's my recently KG gunkote job done in a custom Foliage Green and Tan. I need to do the mag floor plates (always something I forget to do). The foliage green is also the new cerakote product while the tan is the regular gunkote stuff. I also did all the interanl parts in KG crome silver. This way I still have the protection with the KG product, and the easy wipe down cleaning of a glossy light colored surface.
 
|
|
|
|
Posted: 7/21/2006 8:46:24 PM EST
[#50]
sweet grips, and the front strap looks smooth as hell. nice. |
||
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
