Armory Sponsor
post your aow/sbs pics!!! (Page 13 of 21)
|
Originally Posted By westford86:
Page 25 is mine. <a href="https://www.facebook.com/PrimerMultimedia" target="_blank">http://25.media.tumblr.com/b1ff1ff7a61e3681e255f29e0241eb9a/tumblr_n183g0bgFA1qkzsj1o1_1280.jpg</a> Benelli M4 SBS Now that's SEXY! 
|
|
Originally Posted By westford86:
Page 25 is mine. <a href="https://www.facebook.com/PrimerMultimedia" target="_blank">http://25.media.tumblr.com/b1ff1ff7a61e3681e255f29e0241eb9a/tumblr_n183g0bgFA1qkzsj1o1_1280.jpg</a> Benelli M4 SBS 
|
|
Originally Posted By westford86:
Page 25 is mine. <a href="https://www.facebook.com/PrimerMultimedia" target="_blank">http://25.media.tumblr.com/b1ff1ff7a61e3681e255f29e0241eb9a/tumblr_n183g0bgFA1qkzsj1o1_1280.jpg</a> Benelli M4 SBS Can I have it? That is hot sex!! |
|
Originally Posted By beenaround: Not the color you want but it's 14" with wood. http://i3.photobucket.com/albums/y100/beenaround/870wood_zps162c0dfb.jpg Originally Posted By beenaround: Originally Posted By san_antonio_fj: Does Anyone have a pic of an 870 sbs 13-14" with wood stock and od green duracoat or similar Not the color you want but it's 14" with wood. http://i3.photobucket.com/albums/y100/beenaround/870wood_zps162c0dfb.jpg |
Big thanks to FiftyCalAl for doing what he does!
TN Squire
"When governments fear the people, there is liberty. When the people fear the government, there is tyranny." -Thomas Jefferson
TN Squire
"When governments fear the people, there is liberty. When the people fear the government, there is tyranny." -Thomas Jefferson
|
Recently bought a Rem870 from my buddy's shop. It started life as a trade-in Police Wingmaster from NC State Corrections. The shop sent it to Wilson Combat/Scattergun Tech to be shortened, rebuilt and upgraded.
I bought it and sent it to Sumtoy Customs to be threaded for extended chokes. Ran her for a while and was constantly battling rust on the parkerized finish. I did a quick DIY coating with baked on Brownell's AlumaHyde II. Coyote Tan and Matte Black. Eventually, she'll be going to another buddy for Cerakote in Burnt Bronze and Graphite Black. To dull down the chromed bolt a bit, I had it IonBonded. The buttstock is a short Hogue model, the forend is the new Surefire DSF, the 1-shot extension is a Wilson, the rear sling mount is a GG&G and the sling is from Blue Force. 
|
"I have a high art, I hurt with cruelty those that would damage me" Archilocus, 650 B.C.
|
Originally Posted By thesandstertx:
http://i.imgur.com/bM55ZZd.jpg http://i.imgur.com/0yUAxg2.jpg eta: I hate photofucket Dear baby Jesus that is beautiful..... switch to flicker much better |
|
Originally Posted By JJ5685:
After http://i1065.photobucket.com/albums/u399/jj5685/20140506_114819_zpsb69b61a0.jpg That turned out really well. I love the look of the wood on that shotgun. If you are inclined, a leather sling and a Wilson Combat sling plate really make a wood-stocked SBS look complete. Mine sported one when it was in its smallest configuration. 
|
Hippies are the worst source of air and water-borne pollution right behind Dow Chemical and Mexican trucks.
"Destruct Priority 1" means never having to say you're sorry.
"Destruct Priority 1" means never having to say you're sorry.
|
Originally Posted By thesandstertx:
http://i.imgur.com/bM55ZZd.jpg http://i.imgur.com/0yUAxg2.jpg eta: I hate photofucket Nice boomstick! |
|
Originally Posted By Wingnut116ACW:
That turned out really well. I love the look of the wood on that shotgun. If you are inclined, a leather sling and a Wilson Combat sling plate really make a wood-stocked SBS look complete. Mine sported one when it was in its smallest configuration. http://webpages.charter.net/angwingnut/SBS1.jpg Originally Posted By Wingnut116ACW:
Originally Posted By JJ5685:
After http://i1065.photobucket.com/albums/u399/jj5685/20140506_114819_zpsb69b61a0.jpg That turned out really well. I love the look of the wood on that shotgun. If you are inclined, a leather sling and a Wilson Combat sling plate really make a wood-stocked SBS look complete. Mine sported one when it was in its smallest configuration. http://webpages.charter.net/angwingnut/SBS1.jpg how short is that? it looks borderline not short enough to be an AOW? |
Damn, the wait really is long. Look at the condition of the deck in the "before" pic, compared with the "after pic.... 
Originally Posted By JJ5685:
Got my sbs wingmaster refinish complete today. Before http://i1065.photobucket.com/albums/u399/jj5685/IMG_20130707_202554_zps89796398.jpghttp://i1065.photobucket.com/albums/u399/jj5685/20130701_123105_zps8c0cf003.jpg After http://i1065.photobucket.com/albums/u399/jj5685/20140506_114819_zpsb69b61a0.jpg |
This space is for sale.
|
Originally Posted By leonpiper69:
how short is that? it looks borderline not short enough to be an AOW? Originally Posted By leonpiper69:
Originally Posted By Wingnut116ACW:
Originally Posted By JJ5685:
After http://i1065.photobucket.com/albums/u399/jj5685/20140506_114819_zpsb69b61a0.jpg That turned out really well. I love the look of the wood on that shotgun. If you are inclined, a leather sling and a Wilson Combat sling plate really make a wood-stocked SBS look complete. Mine sported one when it was in its smallest configuration. http://webpages.charter.net/angwingnut/SBS1.jpg how short is that? it looks borderline not short enough to be an AOW? I'm not sure, and since I don't have it in that configuration at the moment, I can't run and measure it. That was the 12.5in bbl, so I believe it would still fall in the AOW realm and not the non-NFA PGO shotgun realm. I love that little guy in that configuration and before I had kids, I kept it in an umbrella stand. |
Hippies are the worst source of air and water-borne pollution right behind Dow Chemical and Mexican trucks.
"Destruct Priority 1" means never having to say you're sorry.
"Destruct Priority 1" means never having to say you're sorry.
|
Originally Posted By JoshAston:
http://i733.photobucket.com/albums/ww337/joshua_aston/4E0D74E9-6754-4534-8C57-5AF8CDE38B73_zpskmdrhq3c.jpg Still need a muzzle device, FAL charging handle, maybe a magwell, and a light. Can you post a pic/tutorial on your MOE handguard conversion? I've seen a youtube vid but maybe there are other options. Nice stick, mine will look like that when the ATF gives me permission. Edit* Woah woah hold the phone, is that an AR15 selector on an AK??? Details please. |
|
Originally Posted By 19Charlie_84:
Can you post a pic/tutorial on your MOE handguard conversion? I've seen a youtube vid but maybe there are other options. Nice stick, mine will look like that when the ATF gives me permission. Edit* Woah woah hold the phone, is that an AR15 selector on an AK??? Details please. I didn't take any pics of the process. I cut the middle section out with a hacksaw, then installed a thin piece of steel that I picked up from the local hardware store in the channel on the bottom. Left the steel sticking out the back and covered it with a blob of DevCon epoxy. Once the epoxy had cured I filed it to fit the receiver. Then just used a flat head screw to secure it to the gas block. The safety is an R&R Target safety. It doesn't have any sort of stops built it, so after installing the safety I drilled a couple of holes in the side of the receiver and tapped them for 4-40 cap screws. I then epoxied the screws in place and ground them down to resemble rivets. 
As for the rest of it, ADCO did the barrel work, to include welding the old gas ports and drilling new ones. It only has 3 holes, I forget the size, but they're fairly small. I had them drill them identical to the factory ports. Cadiz Gun Works welded up the receiver, to include the back end, the old fire control group holes, and the old safety holes and provided a new heavy duty op rod. The bolt carrier group and Tapco FCG were polished and reprofiled by Pauly. I cut and reshaped the gas tube and installed the safety. The grip adapter and guide rod are from JT Engineering. The gas plug is a Tac47 Auto Plug. ETA: The barrel is now 12" and the gas block was moved back 2". |
Don't let your mind be so open that your brains fall out or so closed that your ears rub together. ~Brother Wright
|
Originally Posted By Wingnut116ACW:
I'm not sure, and since I don't have it in that configuration at the moment, I can't run and measure it. That was the 12.5in bbl, so I believe it would still fall in the AOW realm and not the non-NFA PGO shotgun realm. I love that little guy in that configuration and before I had kids, I kept it in an umbrella stand. Originally Posted By Wingnut116ACW:
Originally Posted By leonpiper69:
Originally Posted By Wingnut116ACW:
Originally Posted By JJ5685:
After http://i1065.photobucket.com/albums/u399/jj5685/20140506_114819_zpsb69b61a0.jpg That turned out really well. I love the look of the wood on that shotgun. If you are inclined, a leather sling and a Wilson Combat sling plate really make a wood-stocked SBS look complete. Mine sported one when it was in its smallest configuration. http://webpages.charter.net/angwingnut/SBS1.jpg how short is that? it looks borderline not short enough to be an AOW? I'm not sure, and since I don't have it in that configuration at the moment, I can't run and measure it. That was the 12.5in bbl, so I believe it would still fall in the AOW realm and not the non-NFA PGO shotgun realm. I love that little guy in that configuration and before I had kids, I kept it in an umbrella stand. it's purdy though. it's funny how that extra 1 1/2" off the barrel can look so much cooler. but i can bring myself to do it. not the 200 bucks but i just like having the ability to change it around and keep it tile 1 but i will probably do one that short eventually. |
Guns don't kill people, the gubbermint does.
Joined:
Dec 2006
Posts:
6878
EE: 100% (190)
PA, USA
|
Originally Posted By OLI62:
<a href="http://s1071.photobucket.com/user/OLI62/media/IMG_0631_zps909a0ca9.jpg.html" target="_blank">http://i1071.photobucket.com/albums/u504/OLI62/IMG_0631_zps909a0ca9.jpg</a> That right there is exactly what I want for SBS pump. Details please. |
If you like gun porn - https://www.facebook.com/PrimerMultimedia
|
Originally Posted By westford86:
That right there is exactly what I want for SBS pump. Details please. Originally Posted By westford86:
Originally Posted By OLI62:
<a href="http://s1071.photobucket.com/user/OLI62/media/IMG_0631_zps909a0ca9.jpg.html" target="_blank">http://i1071.photobucket.com/albums/u504/OLI62/IMG_0631_zps909a0ca9.jpg</a> That right there is exactly what I want for SBS pump. Details please. Sorry westford, just saw this. Rem 870P 14" modified choke Wilson Combat extended +1 mag tube, spring, and follower Magpul furniture Mesa Tac six shot carrier |
just finished this one earlier this week
Remington 870 wingmaster converted to 3 inch We have built these custom 870 shot guns almost from the ground up. Striped and honed action. Smoothed and polished action inside and out including magazine tube. Stripped, honed and bead blasted pump forend. Stripped polished and bead blasted trigger pins, stock nut, and forend nut Striped and polish bolt carrier until smooth Bead blast and Mil spec phosphate finish every steel part but it’s self Remove old extractor and install metal police extractor. Install machined 7075T6 single point sling mount Install 4140 steel over sized safety button Install No jam bright green machined magazine follower Cut install and test +power high quality magazine spring (650,000 cycle life) Install solid machined 4140 steel +1 tube Install 4 shot DSC on butt stock ( Detachable shot shell carrier) Supply 1x 6 shot black ( Detachable shot shell carrier) (customer to install as they wish) Dlask 14 inch bbl threaded for choke tubes ( MOD) choke Inc Magpul MOE stock set installed |
|
Originally Posted By badboybeeson:
just finished this one earlier this week <a href="http://s142.photobucket.com/user/badboybeeson/media/DSCN0402_zps936f9d89.jpg.html" target="_blank">http://i142.photobucket.com/albums/r107/badboybeeson/DSCN0402_zps936f9d89.jpg</a> <a href="http://s142.photobucket.com/user/badboybeeson/media/DSCN0403_zps81cbf81f.jpg.html" target="_blank">http://i142.photobucket.com/albums/r107/badboybeeson/DSCN0403_zps81cbf81f.jpg</a> <a href="http://s142.photobucket.com/user/badboybeeson/media/DSCN0401_zps86263673.jpg.html" target="_blank">http://i142.photobucket.com/albums/r107/badboybeeson/DSCN0401_zps86263673.jpg</a> Remington 870 wingmaster converted to 3 inch We have built these custom 870 shot guns almost from the ground up. Striped and honed action. Smoothed and polished action inside and out including magazine tube. Stripped, honed and bead blasted pump forend. Stripped polished and bead blasted trigger pins, stock nut, and forend nut Striped and polish bolt carrier until smooth Bead blast and Mil spec phosphate finish every steel part but it’s self Remove old extractor and install metal police extractor. Install machined 7075T6 single point sling mount Install 4140 steel over sized safety button Install No jam bright green machined magazine follower Cut install and test +power high quality magazine spring (650,000 cycle life) Install solid machined 4140 steel +1 tube Install 4 shot DSC on butt stock ( Detachable shot shell carrier) Supply 1x 6 shot black ( Detachable shot shell carrier) (customer to install as they wish) Dlask 14 inch bbl threaded for choke tubes ( MOD) choke Inc Magpul MOE stock set installed Not too shabby! Fine looking shotgun. I couldn't find a 14in bbl for my shotgun that took choke tubes. |
Hippies are the worst source of air and water-borne pollution right behind Dow Chemical and Mexican trucks.
"Destruct Priority 1" means never having to say you're sorry.
"Destruct Priority 1" means never having to say you're sorry.
|
Originally Posted By AKSU:
12.5" 870P <a href="http://s301.photobucket.com/user/AKSU_album/media/Firearms/927A6A25-12C8-4CA1-950E-E1F726405509_zpsniajly3f.jpg.html" target="_blank">http://i301.photobucket.com/albums/nn73/AKSU_album/Firearms/927A6A25-12C8-4CA1-950E-E1F726405509_zpsniajly3f.jpg</a> dammit, seeing your 870 I think I may need to form 1 my 12.5'' 870 AOW now. 
|
|
Finally got the stamp and finished my first SBS. 1990 870 Police Magnum.
Steve Rose of RoseActionsSports.com did the barrel work. 12.5in cut and crown. Vang comp sights, hogue fore end and Magpul stock and sling mount. Added a PA red dot as well but not in the pics. The entire gun was refinished by my with Allumihyde in OD. Shoots like a dream too! 
Federal 00 8 pellet Flight Control at 15yds 
|
|
Originally Posted By voonman:
Here is my contribution 10.9" Vepr 12 SBS http://i57.tinypic.com/2a5m0bn.jpg http://i60.tinypic.com/250otwp.jpg http://i59.tinypic.com/rh1guu.jpg Great build. Any idea who did the cut down or what mods were needed to the gas system? |
|
Originally Posted By voonman:
Here is my contribution 10.9" Vepr 12 SBS http://i57.tinypic.com/2a5m0bn.jpg http://i60.tinypic.com/250otwp.jpg http://i59.tinypic.com/rh1guu.jpg Who did the conversion on your Vepr? |
post your aow/sbs pics!!! (Page 13 of 21)
Armory Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter