80% lowers deals? EDIT-Now, "what did ORJEEPGUY laser or make today?" - Page 7

General » General Discussion

Site Notices

80% lowers deals? EDIT-Now, "what did ORJEEPGUY laser or make today?" (Page 7 of 26)

ORjeepguy

Formerly, icrpdmeself.

Joined Dec 2008
Posts 11858
EE 100% (75)

OR, USA

Posted: 4/24/2023 9:27:18 AM EST

[#1]

Quote History

Originally Posted By GRENDEL87:

Yeah, did that one for a friend when I first got the laser set up and dialed in. Drawn 100% in Lightburn. It's the only gun related thing I've got as my business is not gun related at all.

While Lightburn is way ahead of EZCad2 IMO, being an AutoCAD guy for 30 years, I get pissed at Lightburn's limited interface. Don't get me wrong, it's not horrible for what it is, but it could be way better.

View Quote

I use Inventor and AutoCad daily at work. Ezcad2 makes me want to kick puppies, and I love puppies.

I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

GRENDEL87 Stiff Member Joined Dec 2001 Posts 4839 EE 100% (6) TX, USA	Posted: 4/24/2023 9:52:55 AM EST [#2] Quote History Originally Posted By ORjeepguy: I use Inventor and AutoCad daily at work. Ezcad2 makes me want to kick puppies, and I love puppies. View Quote Damn, you're still using Ezcad2? I think I had about 2 hours on it before I decided to switch to Lightburn. It's worth the money IMO.

zaskar017

Joined Jun 2007
Posts 33621
EE 100% (91)

FL, USA

Posted: 4/24/2023 10:07:18 AM EST

[#3]

Quote History

Originally Posted By ORjeepguy:

Some roll marks that people have asked me to remake seem to change font from line to line within the same roll mark. Makes it interesting.

Then you get requests like this...
https://www.ar15.com/media/mediaFiles/185965/20230424_063526_jpg-2793944.JPG

View Quote

That is hilarious and the reason I keep coming back to this thread.

zaskar017 Joined Jun 2007 Posts 33622 EE 100% (91) FL, USA	Posted: 4/24/2023 10:10:32 AM EST [Last Edit: zaskar017] [#4] A buddy of mine showed me the plethora of Pepe emojis on telegram. They were mostly good quality, and I thought some could make for some fantastic selector markings. I don’t have the app.

ORjeepguy

Formerly, icrpdmeself.

Joined Dec 2008
Posts 11861
EE 100% (75)

OR, USA

Posted: 4/24/2023 9:05:45 PM EST

[#5]

Quote History

Originally Posted By GRENDEL87:

Damn, you're still using Ezcad2? I think I had about 2 hours on it before I decided to switch to Lightburn. It's worth the money IMO.

View Quote

I need to buy lightburn. I just learned ezcad though

I've also got a million things going on right now. Just bought some mismatched half doors for the jeep that I installed yesterday.

Attached File

Designed, laser cut and welded a bracket to hang my full doors on the garage wall.

Attached File

I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

DoubleARon Tier 1 PX Operator Joined Apr 2005 Posts 36376 EE 100% (13) USA	Posted: 4/24/2023 9:34:21 PM EST [#6] Quote History Originally Posted By doc_Zox: Woah https://www.thefirearmblog.com/blog/2020/05/21/amazing-colt-roll-die-collection/amp/ https://www-thefirearmblog-com.cdn.ampproject.org/i/s/www.thefirearmblog.com/blog/wp-content/uploads/2020/05/98045340_3099896093401741_3943155022862221312_o.jpg View Quote He's a member here. Good dude.
	I killed a bacon puppy. :( This post is brought to you by The Pogues, the official punk band of the .mil forums.

Fat_McNasty Member Joined Sep 2001 Posts 71782 EE 100% (2) OR, USA	Posted: 4/24/2023 9:41:54 PM EST [#7] man your leaving me in the dust!
	TX_M1: Boogaloo side quest: Drink so much Monster energy and vodka you think your 1999 Camry is a time travelling Delorean and commit fashion crimes while shouting gag me with a spoon and totally way, way too often.

ORjeepguy Formerly, icrpdmeself. Joined Dec 2008 Posts 11862 EE 100% (75) OR, USA	Posted: 4/24/2023 10:13:51 PM EST [Last Edit: ORjeepguy] [#8] Quote History Originally Posted By Fat_McNasty: man your leaving me in the dust! View Quote We have a 5000w co2 laser at work. I get to design and make anything I want to pay for... Attached File Attached File Attached File Attached File Attached File
	I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

jwb211

Distinguished Member

Joined Jun 2008
Posts 3857
EE 100% (206)

LA, USA

Posted: 4/25/2023 6:20:32 AM EST

[#9]

Quote History

Originally Posted By ORjeepguy:

We have a 5000w co2 laser at work. I get to design and make anything I want to pay for...
https://www.ar15.com/media/mediaFiles/185965/20210903_192837_jpg-2794894.JPG
https://www.ar15.com/media/mediaFiles/185965/20210903_171620_jpg-2794895.JPG
https://www.ar15.com/media/mediaFiles/185965/20210904_145012_jpg-2794896.JPG
https://www.ar15.com/media/mediaFiles/185965/20210905_175125_jpg-2794897.JPG
https://www.ar15.com/media/mediaFiles/185965/20211003_144832_HDR_jpg-2794899.JPG

View Quote

Nice. Is that a silhouette of the dog in it?

Fatboy148 Joined Jun 2007 Posts 2173 EE 100% (16) NY, USA	Posted: 4/25/2023 6:37:42 AM EST [#10] Very impressive skills!

ORjeepguy Formerly, icrpdmeself. Joined Dec 2008 Posts 11865 EE 100% (75) OR, USA	Posted: 4/25/2023 7:24:19 AM EST [#11] Quote History Originally Posted By jwb211: Nice. Is that a silhouette of the dog in it? View Quote Yup! My boy Tater that passed away last year. Attached File Hashbrown too. Attached File
	I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

jwb211

Distinguished Member

Joined Jun 2008
Posts 3858
EE 100% (206)

LA, USA

Posted: 4/25/2023 7:55:10 AM EST

[#12]

Quote History

Originally Posted By ORjeepguy:

Yup! My boy Tater that passed away last year.
https://www.ar15.com/media/mediaFiles/185965/IMG_3716_JPG-2795099.JPG

Hashbrown too.
https://www.ar15.com/media/mediaFiles/185965/20230408_113533_jpg-2795097.JPG

View Quote View All Quotes

View All Quotes

Quote History

Originally Posted By ORjeepguy:

Originally Posted By jwb211:

Nice. Is that a silhouette of the dog in it?

Yup! My boy Tater that passed away last year.
https://www.ar15.com/media/mediaFiles/185965/IMG_3716_JPG-2795099.JPG

Hashbrown too.
https://www.ar15.com/media/mediaFiles/185965/20230408_113533_jpg-2795097.JPG

That’s awesome.

ORjeepguy Formerly, icrpdmeself. Joined Dec 2008 Posts 11866 EE 100% (75) OR, USA	Posted: 4/25/2023 8:26:48 AM EST [#13] Quote History Originally Posted By jwb211: That’s awesome. View Quote I have a habit of putting him on things Attached File
	I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

ORjeepguy Formerly, icrpdmeself. Joined Dec 2008 Posts 11867 EE 100% (75) OR, USA	Posted: 4/25/2023 8:31:12 AM EST [#14] I'm thinking of picking up a case of pmags to engrave on. Just not sure if there is a market for it. Seems everyone does mags. Attached File
	I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

Fat_McNasty Member Joined Sep 2001 Posts 71785 EE 100% (2) OR, USA	Posted: 4/26/2023 7:50:57 PM EST [#15] Quote History Originally Posted By ORjeepguy: I'm thinking of picking up a case of pmags to engrave on. Just not sure if there is a market for it. Seems everyone does mags. https://www.ar15.com/media/mediaFiles/185965/20230415_181917_jpg-2795172.JPG View Quote how is the bed working out for ya?
	TX_M1: Boogaloo side quest: Drink so much Monster energy and vodka you think your 1999 Camry is a time travelling Delorean and commit fashion crimes while shouting gag me with a spoon and totally way, way too often.

ORjeepguy Formerly, icrpdmeself. Joined Dec 2008 Posts 11869 EE 100% (75) OR, USA	Posted: 4/26/2023 8:18:18 PM EST [#16] Quote History Originally Posted By Fat_McNasty: how is the bed working out for ya? View Quote Since ive had it, I haven't had enough of a production run to warrant mounting anything down.
	I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

HenryKnoxFineBooks

Son of Liberty

Joined Nov 2008
Posts 4605
EE 100% (76)

TX, USA

Posted: 4/26/2023 8:26:24 PM EST

[#17]

Quote History

Originally Posted By ORjeepguy:

Some roll marks that people have asked me to remake seem to change font from line to line within the same roll mark. Makes it interesting.

Then you get requests like this...
https://www.ar15.com/media/mediaFiles/185965/20230424_063526_jpg-2793944.JPG

View Quote

The thing about a rollmark is pressure is not evenly applied, and that is really hard to replicate with laser engraving. Also, the laser "burns" the aluminum, and when anodized, is frequently going to show as a lighter color:

Traditional engraving

Attached File

Laser engraving

Attached File

"No clause in the Constitution could by any rule of construction be conceived to give to congress a power to disarm the people." William Rawle

Fat_McNasty Member Joined Sep 2001 Posts 71786 EE 100% (2) OR, USA	Posted: 4/26/2023 9:15:18 PM EST [#18] LOL getting ready to burn..
	TX_M1: Boogaloo side quest: Drink so much Monster energy and vodka you think your 1999 Camry is a time travelling Delorean and commit fashion crimes while shouting gag me with a spoon and totally way, way too often.

ORjeepguy Formerly, icrpdmeself. Joined Dec 2008 Posts 11870 EE 100% (75) OR, USA	Posted: 4/26/2023 10:29:41 PM EST [#19] Quote History Originally Posted By Fat_McNasty: LOL getting ready to burn.. https://www.ar15.com/media/mediaFiles/14562/Boogetch_JPG-2797092.jpg View Quote Yes!
	I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

garbageman Call Sign: Hubba Hubba Joined Jun 2001 Posts 20969 EE 100% (25) IL, USA	Posted: 4/27/2023 5:37:42 AM EST [#20] Quote History Originally Posted By ORjeepguy: I have a habit of putting him on things https://www.ar15.com/media/mediaFiles/185965/20210327_194326_jpg-2795168.JPG View Quote That looks great
	"Why did we shoot him so many times? Because evil can never be dead enough" - Sheriff Wayne Ivey

Fat_McNasty

Member

Joined Sep 2001
Posts 71821
EE 100% (2)

OR, USA

Posted: 4/30/2023 6:11:56 PM EST

[#21]

here it is..

seeing a weird issue in Lightburn where the first 2 passes are on the mark, then it shifts up about .010 ish for the rst of the passes. so its giving me a weird double image. switched back to ezcad and no issue.

So it looks like I might have to give everything a pre run then do the setup. but all runs after the shift are fine. the red aiming outline shifts as whell.

TX_M1:
Boogaloo side quest: Drink so much Monster energy and vodka you think your 1999 Camry is a time travelling Delorean and commit fashion crimes while shouting gag me with a spoon and totally way, way too often.

ORjeepguy

Formerly, icrpdmeself.

Joined Dec 2008
Posts 11872
EE 100% (75)

OR, USA

Posted: 4/30/2023 6:26:23 PM EST

[#22]

Quote History

Originally Posted By Fat_McNasty:
here it is..

https://www.ar15.com/media/mediaFiles/14562/YFDO0843_JPG-2801545.jpg

seeing a weird issue in Lightburn where the first 2 passes are on the mark, then it shifts up about .010 ish for the rst of the passes. so its giving me a weird double image. switched back to ezcad and no issue.

So it looks like I might have to give everything a pre run then do the setup. but all runs after the shift are fine. the red aiming outline shifts as whell.

View Quote

Double lines piss me off. I've had a few things I'd like to do a couple more passes on, but I already moved the image or part. No way it will line back up.

Looks good though!

I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

ORjeepguy Formerly, icrpdmeself. Joined Dec 2008 Posts 11873 EE 100% (75) OR, USA	Posted: 4/30/2023 6:29:41 PM EST [#23] I like where this is going... Attached File
	I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

DTFD714 Joined Dec 2008 Posts 1786 EE 0% (0) MI, USA	Posted: 4/30/2023 6:51:52 PM EST [#24] I’m behind on this. I thought the ATF rule went into effect last August. Did this change?

Fat_McNasty Member Joined Sep 2001 Posts 71822 EE 100% (2) OR, USA	Posted: 4/30/2023 6:59:02 PM EST [#25] Quote History Originally Posted By ORjeepguy: Double lines piss me off. I've had a few things I'd like to do a couple more passes on, but I already moved the image or part. No way it will line back up. Looks good though! View Quote In light burn or ezcad or both? Im trying to trace it down and mine and your are from the same dude.
	TX_M1: Boogaloo side quest: Drink so much Monster energy and vodka you think your 1999 Camry is a time travelling Delorean and commit fashion crimes while shouting gag me with a spoon and totally way, way too often.

ORjeepguy Formerly, icrpdmeself. Joined Dec 2008 Posts 11874 EE 100% (75) OR, USA	Posted: 4/30/2023 10:38:35 PM EST [#26] Quote History Originally Posted By Fat_McNasty: In light burn or ezcad or both? Im trying to trace it down and mine and your are from the same dude. View Quote I haven't used lightburn yet.
	I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

ORjeepguy Formerly, icrpdmeself. Joined Dec 2008 Posts 11875 EE 100% (75) OR, USA	Posted: 4/30/2023 10:39:48 PM EST [#27] Attached File Attached File Attached File Attached File Attached File
	I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

kar98k My Avatar is Staring at You. Joined Sep 2005 Posts 30969 EE 100% (47) TX, USA	Posted: 4/30/2023 10:48:15 PM EST [#28] Quote History Originally Posted By DTFD714: I'm behind on this. I thought the ATF rule went into effect last August. Did this change? View Quote . it's on hold (unenforcable) until it gets thru the courts .
	If some catastrophic event happens and most of humanity is wiped from the face of the earth, the only people left to hang out with will be you guys! Oh the horror! -- Boombastic No situation is ever so bad that the government can't make it worse.

DTFD714 Joined Dec 2008 Posts 1788 EE 0% (0) MI, USA	Posted: 5/1/2023 4:36:53 AM EST [#29] Quote History Originally Posted By kar98k: . it's on hold (unenforcable) until it gets thru the courts . View Quote Thank you!

ORjeepguy Formerly, icrpdmeself. Joined Dec 2008 Posts 11889 EE 100% (75) OR, USA	Posted: 5/4/2023 8:58:45 PM EST [Last Edit: ORjeepguy] [#30] A reminder to not drink while engraving. Sometimes you do a sample burn prior to engraving an 80. After the sample, you need to update the serial number from 1234567, to what you want on the lower Well, that's going in the blem pile. Lol Attached File
	I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

DoubleARon Tier 1 PX Operator Joined Apr 2005 Posts 36440 EE 100% (13) USA	Posted: 5/5/2023 6:20:47 AM EST [#31] Oh well. It was an A2 anyway.
	I killed a bacon puppy. :( This post is brought to you by The Pogues, the official punk band of the .mil forums.

dlshady

Member

Joined Jul 2012
Posts 15480
EE 100% (15)

AL, USA

Posted: 5/5/2023 12:18:13 PM EST

[#32]

Quote History

Originally Posted By ORjeepguy:
A reminder to not drink while engraving.
Sometimes you do a sample burn for someone prior to engraving an 80.
After the sample, you need to update the serial number from 1234567, to what they want on the lower

Well, that's going in the blem pile. Lol

https://www.ar15.com/media/mediaFiles/185965/20230426_195709_jpg-2806061.JPG

View Quote

I'll give ya 20 for it.

"Like anybody would tell Joe Biden what the country's real plans are. He still hasn't figured out that his "laptop" is actually an Etch-A-Sketch." - Mech2007

So gross even my fat wife agrees she's gross. - ConfoundZ

zaskar017

Joined Jun 2007
Posts 33801
EE 100% (91)

FL, USA

Posted: 5/5/2023 12:30:47 PM EST

[#33]

Quote History

Originally Posted By ORjeepguy:
https://www.ar15.com/media/mediaFiles/185965/20230430_203314_jpg-2801827.JPG
https://www.ar15.com/media/mediaFiles/185965/20230430_203324_jpg-2801828.JPG
https://www.ar15.com/media/mediaFiles/185965/20230430_203338_jpg-2801829.JPG
https://www.ar15.com/media/mediaFiles/185965/20230430_203354_jpg-2801830.JPG
https://www.ar15.com/media/mediaFiles/185965/20230430_203411_jpg-2801831.JPG

View Quote

LoL. Those are hilarious.
I like the brick, flower, star selector markings. Clever.

Fat_McNasty Member Joined Sep 2001 Posts 71834 EE 100% (2) OR, USA	Posted: 5/5/2023 9:34:10 PM EST [#34] Little fun for the night, burning holes in a slide. https://www.twitch.tv/fatmcnasty
	TX_M1: Boogaloo side quest: Drink so much Monster energy and vodka you think your 1999 Camry is a time travelling Delorean and commit fashion crimes while shouting gag me with a spoon and totally way, way too often.

DoubleARon Joined Apr 2005 Posts 36449 EE 100% (13) USA	Posted: 5/6/2023 10:15:37 PM EST [#35] Hawt.

joeIII223 Member Joined Aug 2008 Posts 4327 EE 100% (6) NM, USA	Posted: 5/7/2023 8:13:22 PM EST [#36] Quote History Originally Posted By ORjeepguy: Working on a copy of the leaked Glock rifle. https://www.ar15.com/media/mediaFiles/185965/20230311_194632_jpg-2742991.JPG https://www.ar15.com/media/mediaFiles/185965/20230311_194622_jpg-2742992.JPG https://www.ar15.com/media/mediaFiles/185965/glock-rifle-left-1-1024x350_jpg-2742994.JPG View Quote Badass
	Let's go Brandon!

Fat_McNasty Member Joined Sep 2001 Posts 71853 EE 100% (2) OR, USA	Posted: 5/8/2023 9:09:24 PM EST [#37] You do those mags yet?
	TX_M1: Boogaloo side quest: Drink so much Monster energy and vodka you think your 1999 Camry is a time travelling Delorean and commit fashion crimes while shouting gag me with a spoon and totally way, way too often.

F4U_Corsair Member Joined Jul 2015 Posts 2498 EE 100% (15) USA	Posted: 5/8/2023 9:49:49 PM EST [#38] I still think the blem looks great. And it seems that some XM177s were made on A2 lowers?

ORjeepguy Formerly, icrpdmeself. Joined Dec 2008 Posts 11911 EE 100% (75) OR, USA	Posted: 5/8/2023 9:59:44 PM EST [Last Edit: ORjeepguy] [#39] Quote History Originally Posted By Fat_McNasty: You do those mags yet? View Quote Tomorrow! Was doing yard work all weekend. Then today was Monday Did work on this tonight. Attached File Attached File
	I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

ORjeepguy Formerly, icrpdmeself. Joined Dec 2008 Posts 11912 EE 100% (75) OR, USA	Posted: 5/8/2023 10:01:17 PM EST [#40] Quote History Originally Posted By F4U_Corsair: I still think the blem looks great. And it seems that some XM177s were made on A2 lowers? View Quote I am definitely not the one to know what is historically correct I just do what people ask me too.
	I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

The_Wizard_Of_Odd Member Joined Jul 2004 Posts 1240 EE 100% (8) OR, USA	Posted: 5/8/2023 10:10:09 PM EST [Last Edit: The_Wizard_Of_Odd] [#41] Quote History Originally Posted By ORjeepguy: Attached File View Quote I have a blank 80%. Are you close enough to the westside of PDX for a quick roadtrip? Eta: Found the answer by reading mo’ better.

F4U_Corsair Member Joined Jul 2015 Posts 2499 EE 100% (15) USA	Posted: 5/8/2023 11:14:22 PM EST [#42] Quote History Originally Posted By ORjeepguy: I am definitely not the one to know what is historically correct I just do what people ask me too. View Quote Lol oof. That A2 looks sweet.

ORjeepguy Formerly, icrpdmeself. Joined Dec 2008 Posts 11913 EE 100% (75) OR, USA	Posted: 5/9/2023 8:03:26 PM EST [Last Edit: ORjeepguy] [#43] Quote History Originally Posted By Fat_McNasty: You do those mags yet? View Quote Threw in one of my test mags to try. Didn't spend much time lining it up. Attached File
	I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

DoubleARon Joined Apr 2005 Posts 36456 EE 100% (13) USA	Posted: 5/9/2023 10:15:22 PM EST [#44] Quote History Originally Posted By F4U_Corsair: I still think the blem looks great. And it seems that some XM177s were made on A2 lowers? View Quote You just send it out and have it turned into an A1 or earlier lower.

Fat_McNasty Member Joined Sep 2001 Posts 71857 EE 100% (2) OR, USA	Posted: 5/9/2023 11:16:55 PM EST [#45] Quote History Originally Posted By ORjeepguy: Threw in one of my test mags to try. Didn't spend much time lining it up. https://www.ar15.com/media/mediaFiles/185965/20230509_180233_jpg-2811508.JPG View Quote man that looks baller!
	TX_M1: Boogaloo side quest: Drink so much Monster energy and vodka you think your 1999 Camry is a time travelling Delorean and commit fashion crimes while shouting gag me with a spoon and totally way, way too often.

ORjeepguy Formerly, icrpdmeself. Joined Dec 2008 Posts 11915 EE 100% (75) OR, USA	Posted: 5/10/2023 7:22:42 AM EST [#46] Quote History Originally Posted By Fat_McNasty: man that looks baller! View Quote It's a neat design. This was my first use of my 300mm lens. Focal distance is huge! Might drop down to my 200 or 250
	I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

ORjeepguy Formerly, icrpdmeself. Joined Dec 2008 Posts 11917 EE 100% (75) OR, USA	Posted: 5/10/2023 7:22:33 PM EST [#47] Put my 70mm lens in today for the first time. Making a leather stamp for my wife. Sitting outback having a drink while it does its thing. Keeping an eye on the camera. Attached File Attached File
	I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

ORjeepguy Formerly, icrpdmeself. Joined Dec 2008 Posts 11918 EE 100% (75) OR, USA	Posted: 5/10/2023 10:08:58 PM EST [Last Edit: ORjeepguy] [#48] Leather stamp done. 4 hours of material removal. Attached File Attached File Attached File Attached File
	I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."

DoubleARon Joined Apr 2005 Posts 36460 EE 100% (13) USA	Posted: 5/10/2023 10:12:38 PM EST [#49] That looks great.

Fat_McNasty Member Joined Sep 2001 Posts 71859 EE 100% (2) OR, USA	Posted: 5/10/2023 10:37:40 PM EST [#50] Rainbow dash?
	TX_M1: Boogaloo side quest: Drink so much Monster energy and vodka you think your 1999 Camry is a time travelling Delorean and commit fashion crimes while shouting gag me with a spoon and totally way, way too often.

80% lowers deals? EDIT-Now, "what did ORJEEPGUY laser or make today?" (Page 7 of 26)

General » General Discussion

Warning

Confirm Action

About AR15.COM

Stay Connected

Newsletter

Contact Us