User Panel
Originally Posted By chargerdude70:
I did my part, I ordered 6. View Quote View All Quotes View All Quotes Originally Posted By chargerdude70:
Originally Posted By TW200:
PSA AR-15 "BABYPFG-15" STRIPPED LOWER RECEIVER ..... Only 370 left. These are selling quickly ! On a side note, does anyone know if the FDNY lowers are completely sold out, as in no more coming down the pike, or did the first batch sell out and there are more to come later? |
|
"Like anybody would tell Joe Biden what the country's real plans are.
He still hasn't figured out that his "laptop" is actually an Etch-A-Sketch." - Mech2007 So gross even my fat wife agrees she's gross. - ConfoundZ |
Thought I show you guy's where I'm at with my SpaceForce build
Nice box wounder whats in it " /> Parts lots of parts " /> " /> " /> I'm currently at 4.7lbs with this build. Still need the carrier and trigger for this 6.5 grendel plus I'm going to get it finished and color fill the roll marks. |
|
|
Originally Posted By PalmettoStateArmory: Guys, Is this the rail you want? If there is a mix of what you want, we can just put our standard handguards on it, and you can change out the rail. Just guaging opinion. https://www.knightarmco.com/13129/shop/hand-guards/m4-ras-forend-assembly Thanks, Josiah View Quote Also, hope you're doing 14.5 and not 14.7. Some of us have and lowers or bcm flash hiders. |
|
|
Absence of proof is not proof of absence.
KY, USA
|
Originally Posted By PalmettoStateArmory:
Guys, Is this the rail you want? If there is a mix of what you want, we can just put our standard handguards on it, and you can change out the rail. Just guaging opinion. https://www.knightarmco.com/13129/shop/hand-guards/m4-ras-forend-assembly Thanks, Josiah View Quote View All Quotes View All Quotes Originally Posted By PalmettoStateArmory:
Originally Posted By C6H12O6:
@MSKSS Colt M4 stocks & handguards are a dime a dozen and available at ridiculously cheap prices on the EE. People buy 6920s and sell them for just a little more than it takes to ship the stuff. And pistol grips are fairly plentiful as well. These are parts that are easily swappable. I like Sputnik’s idea of sourcing FN plastics. Is this the rail you want? If there is a mix of what you want, we can just put our standard handguards on it, and you can change out the rail. Just guaging opinion. https://www.knightarmco.com/13129/shop/hand-guards/m4-ras-forend-assembly Thanks, Josiah |
If you aren't representing Jesus in a way that makes people want to hang out with you, you're doing it wrong.
|
Originally Posted By PalmettoStateArmory: Guys, Is this the rail you want? If there is a mix of what you want, we can just put our standard handguards on it, and you can change out the rail. Just guaging opinion. https://www.knightarmco.com/13129/shop/hand-guards/m4-ras-forend-assembly Thanks, Josiah View Quote |
|
|
Palmetto State Armory
200 Business Park Blvd Columbia, SC 29203 Web Sales: 1-803-724-6950 [email protected] |
Absence of proof is not proof of absence.
KY, USA
|
Originally Posted By PalmettoStateArmory:
Guys, Here is an "in the raw" sample of the flash hiders we will be using on the M4A1's. Thanks, Josiah https://s3.amazonaws.com/bucket.palmettostatearmory.com/IMG_3430.JPG View Quote |
If you aren't representing Jesus in a way that makes people want to hang out with you, you're doing it wrong.
|
Originally Posted By C6H12O6:
@PalmettoStateArmory I don’t know about full kits since as others have pointed out above the furniture is quite non-clone. Some might not care about that so it may not be an issue. What I’d prefer to see: - 14.5 CHF M4A1 SOCOM barrels w/ FSB - 14.7 CHF M4A1 SOCOM barrel w/ FSB + pin/weld A2 FH - 10.3 CHF SOCOM barrel (not drilled for FSB) w/ correct gas port size - stripped uppers w/o PSA logo but WITH the 7XC20 cage code (near the forge mark) - mil-spec BCG w/o PSA logo but WITH the 7XC20 cage code (on the left side) - lower parts kits w/o fire control but NO divots on takedown & pivot pins With Colt supposedly exiting the civilian rifle market, it’s possible their parts will dry up. PSA could become the go-to for people wanting quality mil-spec parts. Please also do: - M16A2 lowers - M16A4 lowers (featuring 7XC20 cage in a format similar to FN lowers) - M4 burst lowers (featuring 7XC20 cage in a format similar to FN lowers) Trust me, I think people might be interested in these. As @BrickWurX likes when I point it out, the M4A1 was my idea and I’m pretty sure that was profitable. View Quote Thanks, Josiah |
|
Palmetto State Armory
200 Business Park Blvd Columbia, SC 29203 Web Sales: 1-803-724-6950 [email protected] |
Absence of proof is not proof of absence.
KY, USA
|
Originally Posted By PalmettoStateArmory:
We are looking into the proper furniture right now. As far as the FSB, what do you all want? Do you want the sling swivel to be on the side, or is this a non-issue? Also, all of these uppers will be 14.5" pinned and welded. M16A2 lowers have the variance approved, and will be manufactured as soon! Thanks, Josiah View Quote View All Quotes View All Quotes Originally Posted By PalmettoStateArmory:
Originally Posted By C6H12O6:
@PalmettoStateArmory I don’t know about full kits since as others have pointed out above the furniture is quite non-clone. Some might not care about that so it may not be an issue. What I’d prefer to see: - 14.5 CHF M4A1 SOCOM barrels w/ FSB - 14.7 CHF M4A1 SOCOM barrel w/ FSB + pin/weld A2 FH - 10.3 CHF SOCOM barrel (not drilled for FSB) w/ correct gas port size - stripped uppers w/o PSA logo but WITH the 7XC20 cage code (near the forge mark) - mil-spec BCG w/o PSA logo but WITH the 7XC20 cage code (on the left side) - lower parts kits w/o fire control but NO divots on takedown & pivot pins With Colt supposedly exiting the civilian rifle market, it’s possible their parts will dry up. PSA could become the go-to for people wanting quality mil-spec parts. Please also do: - M16A2 lowers - M16A4 lowers (featuring 7XC20 cage in a format similar to FN lowers) - M4 burst lowers (featuring 7XC20 cage in a format similar to FN lowers) Trust me, I think people might be interested in these. As @BrickWurX likes when I point it out, the M4A1 was my idea and I’m pretty sure that was profitable. Thanks, Josiah You guys are going above and beyond on this one, and I really appreciate it. |
If you aren't representing Jesus in a way that makes people want to hang out with you, you're doing it wrong.
|
Palmetto State Armory
200 Business Park Blvd Columbia, SC 29203 Web Sales: 1-803-724-6950 [email protected] |
Absence of proof is not proof of absence.
KY, USA
|
Originally Posted By PalmettoStateArmory:
It all depends on feedback. As of now, we are planning on pinning all of the uppers and kits. Thanks, Josiah View Quote View All Quotes View All Quotes |
If you aren't representing Jesus in a way that makes people want to hang out with you, you're doing it wrong.
|
Palmetto State Armory
200 Business Park Blvd Columbia, SC 29203 Web Sales: 1-803-724-6950 [email protected] |
|
Originally Posted By Sputnik556:
That is absolutely the rail that I want, but unless you can get a screaming deal on them it will increase the cost substantially. View Quote |
|
|
Hey Josish,
Since the Baby PFG does not show as a preorder item and the initial amount listed for sale was around 500 does that mean they are already finished and ready to ship? Also do you have a cutoff on how many will be produced? Thanks! |
|
|
"Some people have issues. Sounds like he signed up for an entire subscription." ~Brohawk
Proud member of Team Ranstad. Arfcom callsign: trenchfoot |
Originally Posted By PalmettoStateArmory:
It all depends on feedback. As of now, we are planning on pinning all of the uppers and kits. Thanks, Josiah View Quote View All Quotes View All Quotes Originally Posted By PalmettoStateArmory:
Originally Posted By Sputnik556:
Will you be offering both pinned and unpinned? Thanks, Josiah I think offering pinned and unpinned would be good. You have a lot of folks who will probably attach their flavor of mount for their suppressor. As for the rail, I say leave off the KAC rail. I think it would increase the price too much and scare potential customers away. |
|
|
I got a bit impatient for the PSA uppers/kits, plus they didnt suit exactly what i desired. Started this about a month ago. More recent, added 59 PMAGs combined with over 1500 rounds of XM855.... Glocks to come.
Per rifle: -PSA M4A1 lower -PSA MOE lower build kit -Stag arms forged uppers w/ standard kits installed -Magpul MLOK vertical grip -Magpul MLOK carbine hanguard -DS Arms 14.7" chrome lined pinned/welded barrel -Magpul RLS sling -Aero Precision front sight -UTG Pro sight/carry handle -PSA chrome lined BCG -Generic delta ring -Generic front sling swivel -Generic charging handle -EXPO Arms gas tube Oh, and did i mention; custom case to hold em all Attached File Attached File Attached File Attached File Attached File |
|
|
Originally Posted By kunkernator:
I got a bit impatient for the PSA uppers/kits, plus they didnt suit exactly what i desired. Started this about a month ago. More recent, added 59 PMAGs combined with over 1500 rounds of XM855.... Glocks to come. Per rifle: -PSA M4A1 lower -PSA MOE lower build kit -Stag arms forged uppers w/ standard kits installed -Magpul MLOK vertical grip -Magpul MLOK carbine hanguard -DS Arms 14.7" chrome lined pinned/welded barrel -Magpul RLS sling -Aero Precision front sight -UTG Pro sight/carry handle -PSA chrome lined BCG -Generic delta ring -Generic front sling swivel -Generic charging handle -EXPO Arms gas tube https://www.AR15.Com/media/mediaFiles/495395/20190829_192452_jpg-1103285.JPG https://www.AR15.Com/media/mediaFiles/495395/20190829_192807_jpg-1103286.JPG https://www.AR15.Com/media/mediaFiles/495395/20190830_191417_jpg-1103287.JPG https://www.AR15.Com/media/mediaFiles/495395/20190830_203936_jpg-1103288.JPG https://www.AR15.Com/media/mediaFiles/495395/20190830_204336_jpg-1103289.JPG View Quote |
|
NOV 2 - ARFCOM Rally at the Capitol Building! https://www.ar15.com/forums/General/Do-you-value-your-2nd-Amendment-Ready-to-lose-it-2A-National-Rally-Nov-2nd-in-DC-/5-2243631/?page=1
#NOVABATTLEBUDDIES *** https://www.vcdl.org/ |
Originally Posted By PalmettoStateArmory:
Guys, Here is an "in the raw" sample of the flash hiders we will be using on the M4A1's. Thanks, Josiah https://s3.amazonaws.com/bucket.palmettostatearmory.com/IMG_3430.JPG View Quote Josiah, Can you guys do a version similar to the Colt extended flash hiders where the back area with the wrench is extended? Attached File |
|
Poop Flinging Gremlin #52
|
Originally Posted By d16man:
@GamecockOperator and i were in Charleston today for one of his follow up cancer appointments. Good news for him, doc said he is starting to see remission at 6-9 months. Next month for him is 6 months, so game is on! We went by PSA Mt. Pleasant and i managed to get this: https://www.AR15.Com/media/mediaFiles/337946/20190926_130627-1103290.jpg View Quote |
|
|
Originally Posted By PalmettoStateArmory: Guys, Is this the rail you want? If there is a mix of what you want, we can just put our standard handguards on it, and you can change out the rail. Just guaging opinion. https://www.knightarmco.com/13129/shop/hand-guards/m4-ras-forend-assembly Thanks, Josiah View Quote |
|
Let me get my coffee first...
|
Originally Posted By stinkypol: @PalmettoStateArmory Josiah, Can you guys do a version similar to the Colt extended flash hiders where the back area with the wrench is extended? https://www.AR15.Com/media/mediaFiles/136710/pix589463429_jpg-1103300.JPG View Quote |
|
|
PSA, a little heads up.
My last lpk had a very undersized roll pin for the trigger guard. To big to be anything else and way to skinny to use. I have 5-6 unused trigger guards so I grabbed one of those. |
|
Callsign: Boom.
|
Originally Posted By d16man:
@GamecockOperator and i were in Charleston today for one of his follow up cancer appointments. Good news for him, doc said he is starting to see remission at 6-9 months. Next month for him is 6 months, so game is on! We went by PSA Mt. Pleasant and i managed to get this: https://www.AR15.Com/media/mediaFiles/337946/20190926_130627-1103290.jpg View Quote |
|
Callsign: Boom.
|
Absence of proof is not proof of absence.
KY, USA
|
Originally Posted By stinkypol:
@PalmettoStateArmory Josiah, Can you guys do a version similar to the Colt extended flash hiders where the back area with the wrench is extended? https://www.AR15.Com/media/mediaFiles/136710/pix589463429_jpg-1103300.JPG View Quote View All Quotes View All Quotes Originally Posted By stinkypol:
Originally Posted By PalmettoStateArmory:
Guys, Here is an "in the raw" sample of the flash hiders we will be using on the M4A1's. Thanks, Josiah https://s3.amazonaws.com/bucket.palmettostatearmory.com/IMG_3430.JPG Josiah, Can you guys do a version similar to the Colt extended flash hiders where the back area with the wrench is extended? https://www.AR15.Com/media/mediaFiles/136710/pix589463429_jpg-1103300.JPG That one looks terrible for a clone. |
If you aren't representing Jesus in a way that makes people want to hang out with you, you're doing it wrong.
|
Looking to buy a firearm through PSA and have it shipped to a FFL I use a lot and is already in their FFL database for having his license.
What's the average ship date on a long run with them. Not in a rush for it so what say ARF.COM?? |
|
|
Originally Posted By shooter_from_show-me:
Looking to buy a firearm through PSA and have it shipped to a FFL I use a lot and is already in their FFL database for having his license. What's the average ship date on a long run with them. Not in a rush for it so what say ARF.COM?? View Quote |
|
NOV 2 - ARFCOM Rally at the Capitol Building! https://www.ar15.com/forums/General/Do-you-value-your-2nd-Amendment-Ready-to-lose-it-2A-National-Rally-Nov-2nd-in-DC-/5-2243631/?page=1
#NOVABATTLEBUDDIES *** https://www.vcdl.org/ |
|
Originally Posted By kunkernator:
I got a bit impatient for the PSA uppers/kits, plus they didnt suit exactly what i desired. Started this about a month ago. More recent, added 59 PMAGs combined with over 1500 rounds of XM855.... Glocks to come. Per rifle: -PSA M4A1 lower -PSA MOE lower build kit -Stag arms forged uppers w/ standard kits installed -Magpul MLOK vertical grip -Magpul MLOK carbine hanguard -DS Arms 14.7" chrome lined pinned/welded barrel -Magpul RLS sling -Aero Precision front sight -UTG Pro sight/carry handle -PSA chrome lined BCG -Generic delta ring -Generic front sling swivel -Generic charging handle -EXPO Arms gas tube Oh, and did i mention; custom case to hold em all https://www.AR15.Com/media/mediaFiles/495395/20190829_192452_jpg-1103285.JPG https://www.AR15.Com/media/mediaFiles/495395/20190829_192807_jpg-1103286.JPG https://www.AR15.Com/media/mediaFiles/495395/20190830_191417_jpg-1103287.JPG https://www.AR15.Com/media/mediaFiles/495395/20190830_203936_jpg-1103288.JPG https://www.AR15.Com/media/mediaFiles/495395/20190830_204336_jpg-1103289.JPG View Quote |
|
|
I would love either a 14.7 or 14.5 with a FSP. I already have a RIS II rail & an M4A1 Lower from PSA.
the rest I can add later. Also @Combat_Diver He would be the one to ask, he works on M4s & M4A1s as a living |
|
"Government's first duty is to protect the people, not run their lives." - Ronald Reagan
Volunteer Firefighter/EMT and damn PROUD to be! : Arfcom Callsign "Bucket 2" |
Originally Posted By PalmettoStateArmory: We are looking into the proper furniture right now. As far as the FSB, what do you all want? Do you want the sling swivel to be on the side, or is this a non-issue? Also, all of these uppers will be 14.5" pinned and welded. M16A2 lowers have the variance approved, and will be manufactured as soon! Thanks, Josiah View Quote My cheap side would like a kit without any furniture or rails, since I'm going to replace them with colt and KAC stuff anyway, but my impatient side would love a kit with KAC/P&S rails, Colt/FN stock and grip and a Matech rear sight.... maybe two options? |
|
|
Originally Posted By PalmettoStateArmory: Alien-51 lowers will be shipping shortly!! Just as an update, the only two lowers that we are waiting on the ATF for are the I-Stand 10, and the I-Stand 9. Variances before and after them have been approved, but for some reason we are waiting on them. We have been contacting the ATF to find out what the hold-up is. Apparently these two are just taking longer for no apparent reason. We apologize for the delay in any of the meme/custom lowers. Thank you, Josiah View Quote Josiah, Since there is some kind of hold up on approval and the pre-order is moving into month 3, what is the game plan? The reality of the situation, is that these I Stand 10 and 9 orders could be into the Christmas season?? Guys on a tight budget might have wanted to pick up a different one knowing this (which I know you cant foresee the future anymore than I can), but it might be time for some to cut bait. Any other ideas? Thanks. |
|
|
Originally Posted By PalmettoStateArmory: It all depends on feedback. As of now, we are planning on pinning all of the uppers and kits. Thanks, Josiah View Quote kac rail is awesome but may drive the price up. |
|
|
@PalmettoStateArmory. Got my I stand today. I guess they went over the advertised 1776 just like the Yeet went over the advertised 750?
Just got SN 1953. That’s two in a row I got above the advertised quantity being made. |
|
|
Originally Posted By Drz07:
Would like to see an unpinned version with fsb, a2 flash hider and side sling mount. kac rail is awesome but may drive the price up. View Quote View All Quotes View All Quotes Originally Posted By Drz07:
Originally Posted By PalmettoStateArmory: It all depends on feedback. As of now, we are planning on pinning all of the uppers and kits. Thanks, Josiah kac rail is awesome but may drive the price up. |
|
|
Originally Posted By Pothole: My cheap side would like a kit without any furniture or rails, since I'm going to replace them with colt and KAC stuff anyway, but my impatient side would love a kit with KAC/P&S rails, Colt/FN stock and grip and a Matech rear sight.... maybe two options? View Quote |
|
|
Originally Posted By PalmettoStateArmory:
It all depends on feedback. As of now, we are planning on pinning all of the uppers and kits. Thanks, Josiah View Quote View All Quotes View All Quotes Originally Posted By PalmettoStateArmory:
Originally Posted By Sputnik556:
Will you be offering both pinned and unpinned? Thanks, Josiah The KAC rail is the correct one but will probably add quite a bit to the cost. Also consider that you can find them on the EE or eBay at a significant savings over retail. It will be hard to justify the expense. A side sling swivel mount would be correct also if you could add it rather then the bottom mounted swivel. |
|
|
14.5 unpinned I would buy. Not interested in pinned.
|
|
|
Originally Posted By sigking: @palmettostatearmory Josiah, Since there is some kind of hold up on approval and the pre-order is moving into month 3, what is the game plan? The reality of the situation, is that these I Stand 10 and 9 orders could be into the Christmas season?? Guys on a tight budget might have wanted to pick up a different one knowing this (which I know you cant foresee the future anymore than I can), but it might be time for some to cut bait. Any other ideas? Thanks. View Quote View All Quotes View All Quotes Originally Posted By sigking: @palmettostatearmory Josiah, Since there is some kind of hold up on approval and the pre-order is moving into month 3, what is the game plan? The reality of the situation, is that these I Stand 10 and 9 orders could be into the Christmas season?? Guys on a tight budget might have wanted to pick up a different one knowing this (which I know you cant foresee the future anymore than I can), but it might be time for some to cut bait. Any other ideas? Thanks. Originally posted by 19119640:
@PalmettoStateArmory. Got my I stand today. I guess they went over the advertised 1776 just like the Yeet went over the advertised 750? Just got SN 1953. That’s two in a row I got above the advertised quantity being made. |
|
|
Originally Posted By bucko1975:
Hey Josish, Since the Baby PFG does not show as a preorder item and the initial amount listed for sale was around 500 does that mean they are already finished and ready to ship? Also do you have a cutoff on how many will be produced? Thanks! View Quote Thanks! Josiah |
|
Palmetto State Armory
200 Business Park Blvd Columbia, SC 29203 Web Sales: 1-803-724-6950 [email protected] |
Originally Posted By sigking: @palmettostatearmory Josiah, Since there is some kind of hold up on approval and the pre-order is moving into month 3, what is the game plan? The reality of the situation, is that these I Stand 10 and 9 orders could be into the Christmas season?? Guys on a tight budget might have wanted to pick up a different one knowing this (which I know you cant foresee the future anymore than I can), but it might be time for some to cut bait. Any other ideas? Thanks. View Quote Thanks, Josiah |
|
Palmetto State Armory
200 Business Park Blvd Columbia, SC 29203 Web Sales: 1-803-724-6950 [email protected] |
Originally Posted By d16man:
Switch "sullivan" and "moultrie". Moultrie was the fort. View Quote View All Quotes View All Quotes Originally Posted By d16man:
Originally Posted By BrickWurX: Not a bad idea really. Many of the more popular flags mentioned are offered for sale from manufacturers. PSA currently offers a good selection of those historical flags in one fashion or another. I finished the one below not long ago. PSA offers a newer design of the flag. This version is the orginal design used in battle. https://live.staticflickr.com/65535/48796077998_9e11542d08_b.jpg Reference site |
|
|
Originally Posted By chargerdude70:
A quick off topic question. Those who F1 SBR's. When putting in weapon information it asks for description. What is placed in that box? Its the box above the box where you State Why You Intend To Make Firearm. View Quote That field is for: Additional Description (Indicate required maker’s markings to include maker’s name (as registered), city and state as each will appear on firearm) Not for type of firearm, which you chose from a dropdown already. And if you’ve never done an EForm 1 before, be aware that no matter what you put in the field, it won’t show up on the form when you submit it. I’m guessing the examiners can see it in the system, but it won’t be on the Draft, Submitted, or Approved PDF. |
|
|
|
|
Originally Posted By BrickWurX: Yes, no, and yes. Colonel William Moultrie designed the flag prior to it's use when taking Fort Sullivan after taking Fort Johnson. But up until taking Fort Sullivan, the flag did not have a name. It was named the Moultrie flag only after Fort Sullivan was rename Fort Moultrie. Reference site View Quote For us SC guys, it will forever be Ft. Moultrie. |
|
"Some people have issues. Sounds like he signed up for an entire subscription." ~Brohawk
Proud member of Team Ranstad. Arfcom callsign: trenchfoot |
Originally Posted By XDfense:
Me too on the rail. I'd like pinned and with the side swivel. I'm hoping in true PSA fashion, these are a good deal. Thanks as always PSA. View Quote View All Quotes View All Quotes Originally Posted By XDfense:
Originally Posted By Sputnik556:
That is absolutely the rail that I want, but unless you can get a screaming deal on them it will increase the cost substantially. Pinned and welded with the side swivel, yes. |
|
"The right to buy weapons is the right to be free"
|
Originally Posted By PalmettoStateArmory: Both variances arrived today, and are ready to go into production!! Thanks, Josiah View Quote Maybe one day you can describe the process, jumping through hoops; it takes to bring one of these designs to production. It can't be fun or easy dealing with the ATF. And what is it they need to approve?? The actual picture, the serial prefix, selector markings, or all of it. Interested in the process and what part of it could make it a problem or gets denied. - |
|
|
Originally Posted By 19119640:
@PalmettoStateArmory. Got my I stand today. I guess they went over the advertised 1776 just like the Yeet went over the advertised 750? Just got SN 1953. That’s two in a row I got above the advertised quantity being made. View Quote JK That is not good news. From the PSA website. "Only 1776 of these are going to be made, so all serial numbers will be #1 through #1776" This one, I didn't buy for the limited number aspect. This one, I bought, along with the I Stand 10, because of the message it promoted. But someone needs a talking to, common core math is not an excuse..... |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.