Official Dagger Thread!!!!!!!!!!!!!!!! (Page 16 of 18)
|
Originally Posted By slayer1: I skimmed through all 15 pages but couldn't come up with a definitive answer. Is there a DAGR slide that will fit a Gen 3 G17 frame? If not are there any plans to produce one? FYI these are GTG: https://www.brownells.com/gun-parts/handgun-parts/handgun-slides-parts/rmr-cut-slide-for-glock-17-gen-3/ |
Thirty-year-old-me could kick sixty-year-old-me's ass and make me eat catshit outa the ditch.
|
Originally Posted By SC4eyes: FYI these are GTG: https://www.brownells.com/gun-parts/handgun-parts/handgun-slides-parts/rmr-cut-slide-for-glock-17-gen-3/ I appreciate the link. I'm a Charleston, SC guy and a huge PSA fan so I was trying to stay within their product line. |
Joined:
Jun 2023
Posts:
68
EE: 0% (0)
SC, USA
|
Originally Posted By SC4eyes: FYI these are GTG: https://www.brownells.com/gun-parts/handgun-parts/handgun-slides-parts/rmr-cut-slide-for-glock-17-gen-3/ Originally Posted By SC4eyes: Originally Posted By slayer1: I skimmed through all 15 pages but couldn't come up with a definitive answer. Is there a DAGR slide that will fit a Gen 3 G17 frame? If not are there any plans to produce one? FYI these are GTG: https://www.brownells.com/gun-parts/handgun-parts/handgun-slides-parts/rmr-cut-slide-for-glock-17-gen-3/ I actually went to the new Myrtle Beach store when it opened and asked them that question in person, they could not give me an answer there either. Just the general "i dont think so" answer. |
|
Originally Posted By slayer1: I skimmed through all 15 pages but couldn't come up with a definitive answer. Is there a DAGR slide that will fit a Gen 3 G17 frame? If not are there any plans to produce one? At this time we do not have one. Thank you, Josiah |
Palmetto State Armory
3760 Fernandina Rd
Columbia, SC 29210
Web Sales: 1-803-724-6950
3760 Fernandina Rd
Columbia, SC 29210
Web Sales: 1-803-724-6950
Joined:
Jan 2023
Posts:
101
EE: 100% (1)
NC, USA
|
Originally Posted By Moyockgunner: Any word on the Micro? I see complete guns listed and lowers but all out of stock. Lots of cool slides. Any change to run a real RMR one in the future? I like my RMR's. As soon as available I will place an order. ditto Just waiting on a complete pistol deal. |
Prov 11:9 An hypocrite with his mouth destroyeth his neighbour: but through knowledge shall the just be delivered.
|
Originally Posted By Moyockgunner: Any word on the Micro? I see complete guns listed and lowers but all out of stock. Lots of cool slides. Any change to run a real RMR one in the future? I like my RMR's. As soon as available I will place an order. Coming very soon! Josiah |
Palmetto State Armory
3760 Fernandina Rd
Columbia, SC 29210
Web Sales: 1-803-724-6950
3760 Fernandina Rd
Columbia, SC 29210
Web Sales: 1-803-724-6950
Joined:
Jan 2023
Posts:
106
EE: 100% (1)
NC, USA
|
Originally Posted By PalmettoStateArmory: Coming very soon! Josiah Attached File |
|
Originally Posted By PalmettoStateArmory: Coming very soon! Josiah Im on the fence about the Micro Dagger and the 365. I need two and I want to buy before Christmas. Regular and one of the comped slides (Micro Dagger Macro Comp). |
Greater love hath no man than this, that a man lay down his life for his friends. - John 15:13
The urge to save humanity is almost always only a false-face for the urge to rule it. - H.L. Mencken
The urge to save humanity is almost always only a false-face for the urge to rule it. - H.L. Mencken
Joined:
Jan 2023
Posts:
108
EE: 100% (1)
NC, USA
|
Originally Posted By 96Ag: I sure hope so. Im on the fence about the Micro Dagger and the 365. I need two and I want to buy before Christmas. Regular and one of the comped slides (Micro Dagger Macro Comp). Originally Posted By 96Ag: Originally Posted By PalmettoStateArmory: Coming very soon! Josiah Im on the fence about the Micro Dagger and the 365. I need two and I want to buy before Christmas. Regular and one of the comped slides (Micro Dagger Macro Comp). I'm in the same boat. If they are as nice as I think they are I want two. Also looking hard at the Sig 365. |
Joined:
Jan 2023
Posts:
125
EE: 100% (1)
NC, USA
|
How long of Dagger Compact slide can be reasonably accommodated? G34 length? My first Dagger will be complete Friday/Saturday pending UPS and I’d be curious about maybe an alternative target style slide setup @PalmettoStateArmory |
I wouldn't stand in front of a piss-filled supersoaker. Does that make it a good pistol? - Caboose314
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet
|
First Dagger Attached File |
I wouldn't stand in front of a piss-filled supersoaker. Does that make it a good pistol? - Caboose314
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet
|
First time out with my new dagger and I was having some feeding issues... when I inserted a full mag and hit the release to chamber a round, it would not chamber and kept getting hung up. I did eventually get it to load and it shot fine after that, but it also wouldn't lock back after the last round with either p mags or glock mags. I attached a pic of what kept happening, has anyone else had this issue? It was happening with 115 gr blazer aluminum cased and CCI brass cased 115 gr. Maybe I just need to polish the feed ramp so it feeds easier? Pic of malfunction here |
|
Originally Posted By x248716x: replaced my mag release spring with a reduced lbs spring from RYG. it's 0.047" dia vs the std Glock 0.050" thickness. makes a difference. dunno if the Dagger mag release spring is thicker than the stock Glock spring. Bingo. I put RYG mag release springs in all 3 of my Daggers the other day. Awesome improvement in the mag release function. Thanks! |
Big girls make all your dreams come true!
Joined:
Dec 2001
Posts:
44984
EE: 100% (4)
WV, USA
Joined:
Jan 2022
Posts:
1003
EE: 0% (0)
USA
|
Originally Posted By colklink: @DaveyDug where did you order them from? Thanks Rock Your Glock https://rockyourglock.com/ryg-reduced-pound-magazine-catch-spring |
Big girls make all your dreams come true!
Joined:
Dec 2001
Posts:
44986
EE: 100% (4)
WV, USA
|
Originally Posted By x248716x: Rock Your Glock https://rockyourglock.com/ryg-reduced-pound-magazine-catch-spring Thank you. |
A true Texan would never leave his friends behind!
Big girls make all your dreams come true!
Joined:
Dec 2001
Posts:
45011
EE: 100% (4)
WV, USA
|
Originally Posted By colklink: Thank you. Originally Posted By colklink: Originally Posted By x248716x: Rock Your Glock https://rockyourglock.com/ryg-reduced-pound-magazine-catch-spring Thank you. Just ordered a couple, along with a few other Glock parts. Thanks again. |
A true Texan would never leave his friends behind!
Big girls make all your dreams come true!
Joined:
Dec 2001
Posts:
45027
EE: 100% (4)
WV, USA
|
Originally Posted By DaveyDug: Yeah, the crazy mag release situation is really the only thing I didn't like about the Daggers. You'll be happy with the RYG springs. So much nicer. As I understand it, there were issues with early Daggers dropping mags at random. I believe it turned out to be too long of a feed ramp on barrels. But I think the extra strong mag catch spring was a fix of sorts. It's a lot stronger than it needs to be. I can release the mags on my Daggers without shifting my grip, but it does slow you down a bit. That's probably my only gripe with the Daggers. |
A true Texan would never leave his friends behind!
|
Originally Posted By colklink: As I understand it, there were issues with early Daggers dropping mags at random. I believe it turned out to be too long of a feed ramp on barrels. But I think the extra strong mag catch spring was a fix of sorts. It's a lot stronger than it needs to be. I can release the mags on my Daggers without shifting my grip, but it does slow you down a bit. That's probably my only gripe with the Daggers. I think that "too long of a feed ramp", "dropping mags" issues was on the PSA H&R 9mm PCC carbines, not on the Daggers. But because it was PSA and 9mm, somehow that story got crossed over to the Daggers. That's my recollection, since I'm watching both of those stories. and once it crossed over, there's no undoing that now. |
|
A fellow on one of the Reddit groups noticed the size of the slide release has changed considerably. I had to check my recently purchased FDE frame and compare to my black frame that I ordered two weeks after they became available and sure enough, shrinkage! Attached File |
Big girls make all your dreams come true!
Joined:
Dec 2001
Posts:
45036
EE: 100% (4)
WV, USA
|
Originally Posted By rpoL98: I think that "too long of a feed ramp", "dropping mags" issues was on the PSA H&R 9mm PCC carbines, not on the Daggers. But because it was PSA and 9mm, somehow that story got crossed over to the Daggers. That's my recollection, since I'm watching both of those stories. and once it crossed over, there's no undoing that now. I do know that some early Daggers had the issue. I have been following the Dagger for a couple years. As far as I know PSA never made an official announcement as to what was causing the issue, I had read it was out of spec barrels. I know nothing about the H&R PCC 9mms. |
A true Texan would never leave his friends behind!
Big girls make all your dreams come true!
Joined:
Dec 2001
Posts:
45106
EE: 100% (4)
WV, USA
|
Originally Posted By DaveyDug: Yeah, the crazy mag release situation is really the only thing I didn't like about the Daggers. You'll be happy with the RYG springs. So much nicer. @DaveyDug the springs came in today, what a huge difference. I replaced the mag catch spring on 2 of my Daggers, the ones I shoot the most. I will test them, and as long as I don't have the mag drop when it's not supposed to, I will replace the other 4. Thanks again for the suggestion. |
A true Texan would never leave his friends behind!
|
Originally Posted By colklink: @DaveyDug the springs came in today, what a huge difference. I replaced the mag catch spring on 2 of my Daggers, the ones I shoot the most. I will test them, and as long as I don't have the mag drop when it's not supposed to, I will replace the other 4. Thanks again for the suggestion.  Glad it worked well for you too! |
|
$49.99 PSA Dagger Compact Complete Polymer Frame, Black $12.30 15 round PMAG $199.99 Doctor cut slide assy with threaded barrel, extreme carry cuts, Ameriglo suppressor height sights, sniper green $126.62 Sightmark Mini-Shot M-Spec Reflex Sight I ended up snagging 3x PMAGs and opted for shipping protection on both PSA orders. Right now I'm into this setup $457.93 delivered (not including FFL transfer fees) for a pistol with optic/night sights & 3 mags. As I understand it, the Mini-Shot may not fit in the doctor cut on the dagger slide. Sounds like the PSA doctor cut matches some of the vortex sights and the footprint of the Mini-Shot will extend rearward with some interference. I may need to remove some material from the Mini-Shot or the slide, not sure which will be easier or more responsible. We will see. This is my entry into the optic/pistol world and value is everything. Heck, my wife even opted to pick up the tab on this build for me. Thank you PSA for blazing this trail for us. |
|
Originally Posted By RottenPumpkin: Put this together for my wife. It's a Christmas present. She's a beekeeper and loves Tiffany's.  https://i.postimg.cc/pdZVsHNH/20231118-074048.jpg https://i.postimg.cc/J4k19JwK/20231118-074013.jpg https://i.postimg.cc/kGtmPrHD/20231118-073947.jpg https://i.postimg.cc/zGk3cWW6/20231120-160100.jpg Awesome! Want to do the same thing just waiting on my compact frame to get here to see how my wife likes the compact over the full size. That barrel is sharp! |
|
Originally Posted By sigpros: Awesome! Want to do the same thing just waiting on my compact frame to get here to see how my wife likes the compact over the full size. That barrel is sharp! Originally Posted By sigpros: Originally Posted By RottenPumpkin: Put this together for my wife. It's a Christmas present. She's a beekeeper and loves Tiffany's. https://i.postimg.cc/pdZVsHNH/20231118-074048.jpg https://i.postimg.cc/J4k19JwK/20231118-074013.jpg https://i.postimg.cc/kGtmPrHD/20231118-073947.jpg https://i.postimg.cc/zGk3cWW6/20231120-160100.jpg Awesome! Want to do the same thing just waiting on my compact frame to get here to see how my wife likes the compact over the full size. That barrel is sharp! Thanks. All the parts are PSA Dagger except the backplate. Ordered that from Classy Raptor. |
| On the notify list for the robin egg blue compact frame. They came in stock while I’ve been waiting on my compact frame, sucks UPS has lost or miss placed my order. Now the robin egg is OOS again. Very nice looking pistol. Your wife should be pleased with it. I’m a fan of the one Dagger I have and I don’t like glocks I’m a Sig P series guy |
|
Originally Posted By jacobsk: $49.99 PSA Dagger Compact Complete Polymer Frame, Black $12.30 15 round PMAG $199.99 Doctor cut slide assy with threaded barrel, extreme carry cuts, Ameriglo suppressor height sights, sniper green $126.62 Sightmark Mini-Shot M-Spec Reflex Sight I ended up snagging 3x PMAGs and opted for shipping protection on both PSA orders. Right now I'm into this setup $457.93 delivered (not including FFL transfer fees) for a pistol with optic/night sights & 3 mags. As I understand it, the Mini-Shot may not fit in the doctor cut on the dagger slide. Sounds like the PSA doctor cut matches some of the vortex sights and the footprint of the Mini-Shot will extend rearward with some interference. I may need to remove some material from the Mini-Shot or the slide, not sure which will be easier or more responsible. We will see. This is my entry into the optic/pistol world and value is everything. Heck, my wife even opted to pick up the tab on this build for me. Thank you PSA for blazing this trail for us. Following up on my own post here. Have had the doctor cut Dagger slide and Sightmark Mini-Shot for about a week now, finally got to measuring them and eyeing them up. Looks like the Mini-Shot has 0.3mm of interference with the rear of the doctor cut. I believe this is due to the rounded profile on the rear of PSA’s doctor cut. The footprint of the Mini-Shot has a flat rear surface. It’s not actually much interference, and the center of the rounded profile on the doctor cut actually clears. Now I have a dilemma, do I shave a fraction of a millimeter from the slide or the optic? Looking at how the aluminum housing is machined for the optic I’m leaning that direction. |
|
Ended up taking a file and removing the 0.3mm from the corners of the Sightmark Mini-Shot to fit the Doctor cut on my slide. Not much material at all, the rear of the sight used to have a flat profile: Attached File Installed: Attached File |
|
Blows my mind that this cost under $400 with the optic. Feels great in the hand, range report after I get it for Christmas  Attached File |
|
Originally Posted By jacobsk: Blows my mind that this cost under $400 with the optic. Feels great in the hand, range report after I get it for Christmas https://www.ar15.com/media/mediaFiles/116241/IMG_8637_jpeg-3051580.JPG |
Greater love hath no man than this, that a man lay down his life for his friends. - John 15:13
The urge to save humanity is almost always only a false-face for the urge to rule it. - H.L. Mencken
The urge to save humanity is almost always only a false-face for the urge to rule it. - H.L. Mencken
|
Originally Posted By colklink: @DaveyDug the springs came in today, what a huge difference. I replaced the mag catch spring on 2 of my Daggers, the ones I shoot the most. I will test them, and as long as I don't have the mag drop when it's not supposed to, I will replace the other 4. Thanks again for the suggestion. Originally Posted By colklink: Originally Posted By DaveyDug: Yeah, the crazy mag release situation is really the only thing I didn't like about the Daggers. You'll be happy with the RYG springs. So much nicer. @DaveyDug the springs came in today, what a huge difference. I replaced the mag catch spring on 2 of my Daggers, the ones I shoot the most. I will test them, and as long as I don't have the mag drop when it's not supposed to, I will replace the other 4. Thanks again for the suggestion. Glad the RYG springs worked. Here is my experience with this issue. I did not see this thread after I bought my Blem FDE Compact frame. The mag release was really stiff. I read other threads that said NDZ mag release helped. Ordered one for about $14 shipped, but was still too stiff. I read to replace the spring. I ordered a Glock OEM spring from Big Tex Ordnance for $.99, $3.98 with shipping. Problem was fixed. Nice thing about the NDZ release is it has serrations. |
If U can't Truck It F!@k It!
|
Does anyone one else have a Dagger that doesn't like to lock back on an empty magazine? I have 2 15 round Pmags that lock the slide back 100% of the time in my G19, but it only locks back on occasion in my Dagger. edit: tracked the issue down to the slide stop lever, not exactly sure what the issue is/was, but I took the one from my 19 and put it in the dagger, and put the one from the dagger in my 19 and now the dagger locks back 100% of the time, and so does the 19. |
|
63.51 - Frame 31.00 - Transfer 115 - Slide assy 26.84 - AIM barrel 236.35 Prices include shipping and tax. I did swap the original sights out for Trijicons.  I’m going to smooth up the undercut. An extended mag release is inbound. From the other posts in this thread I may sway that release spring too. The trigger is mushy but liveable. No plans for an optic as it’ll be a KISS gun. Normally I swap the slide release on my Glocks with an OEM extended but surprisingly this one works pretty well for me. Has anyone else deepened the undercut? |
RIP Joker1
Lilly, countless other pups along with their new families and myself are forever thankful for your dedication
Lilly, countless other pups along with their new families and myself are forever thankful for your dedication
|
Herrington Arms just released a magwell for the Dagger compact. I just ordered one. I have one of the polymer magwells that was released a while ago that I didn't like. It really pinched the bottom of my hand. This one looks like it extends the bottom of the frame and doesn't go over top of it. I also ordered one of their comps to replace the one I have on my Dagger. The current comp will go on another threaded 9mm I have. https://herringtonarms.com/collections/psa-magwells/products/ha-magwell-for-the-psa-dagger No affiliation with them other than I follow them on Instagram. |
|
Originally Posted By MyakkaVice: Is this the Glock 17 length slide that fits on the compact 19 size frame? https://www.ar15.com/media/mediaFiles/86522/Screenshot_20221210-120512_png-2630467.JPG https://www.ar15.com/media/mediaFiles/86522/Screenshot_20221210-120454_png-2630468.JPG Will this fit on a Polymer 80 g19 grip/g17 slide type frame? |
R.I.P. Beau 8-17-2022
|
Originally Posted By AS556: Will this fit on a Polymer 80 g19 grip/g17 slide type frame? |
|
Originally Posted By Neomonk21: Herrington Arms just released a magwell for the Dagger compact. I just ordered one. I have one of the polymer magwells that was released a while ago that I didn't like. It really pinched the bottom of my hand. This one looks like it extends the bottom of the frame and doesn't go over top of it. I also ordered one of their comps to replace the one I have on my Dagger. The current comp will go on another threaded 9mm I have. https://herringtonarms.com/collections/psa-magwells/products/ha-magwell-for-the-psa-dagger No affiliation with them other than I follow them on Instagram. I bought these also. Excited to try them. Also using a OP trigger with Ghost connector. I love this pistol. Attached File |
R.I.P. Beau 8-17-2022