User Panel
Currently I would say my Tavor SAR. I just Attached File
put this T 31 on it. I need to shoot it. The rifle has been 100%. But honestly, nearly all my ar’s have been also. |
|
|
Originally Posted By ForestRegion:
I'm too scared to weigh it Weight doesn't concern me too bad for an HD blaster. If I decide to grab this one for hunting, I'll have to take the laser and light off. I usually don't have to hike too far unless I'm hunting game lands. Also have a tripod in the works. I have a different go to rifle that addresses weight constraints. View Quote View All Quotes View All Quotes Originally Posted By ForestRegion:
Originally Posted By BIgDAM:
Originally Posted By ForestRegion:
Updated the go to HD blaster: https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/125047600288/large/1583504686/enhance https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/125047600203/large/1583504674/enhance Weight doesn't concern me too bad for an HD blaster. If I decide to grab this one for hunting, I'll have to take the laser and light off. I usually don't have to hike too far unless I'm hunting game lands. Also have a tripod in the works. I have a different go to rifle that addresses weight constraints. No reason to have a 9 lb SBR. |
|
All my wife requires is that you pee in the toilet, lawn or shower...I lobbied for the sink but she said no. -beardog30
|
|
|
Originally Posted By SurtrsFire:
9lbs sbr? Must be nice to have such a lightweight gun View Quote View All Quotes View All Quotes |
|
All my wife requires is that you pee in the toilet, lawn or shower...I lobbied for the sink but she said no. -beardog30
|
Originally Posted By ForestRegion:
Updated the go to HD blaster: https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/125047600288/large/1583504686/enhance https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/125047600203/large/1583504674/enhance View Quote Seriously handsome gun right there |
|
"Don't tread on Me, I'll shoot!
NRA Life Member |
"Don't tread on Me, I'll shoot!
NRA Life Member |
Originally Posted By M-4matus:
I love it when My Thread blows up! So many good pics, thanks guys. https://www.AR15.Com/media/mediaFiles/484978/20200306_202322-1304886.jpg My only regret in life currently is that I did not buy all of My Cans at once. Waiting on an Omega 300 & SF SOCOM RC-2... "One 9mm Can just isn't enough Suppression in My life". View Quote |
|
|
|
Originally Posted By Blackhalo:
He'll like the Omega more At least I do and I have both; as well as a couple other SF Socom cans. View Quote View All Quotes View All Quotes Originally Posted By Blackhalo:
Originally Posted By SurtrsFire:
You're gonna like the rc2. Haters gonna hate hate hate At least I do and I have both; as well as a couple other SF Socom cans. @Blackhalo Yes, I am very excited for the RC2, but mostly for my 10-5"-LMT and 11-5"-Federal HRT, I run SF Warcomps on them already. Pretty Much all my RECCE Rifles and Heavy AR's ar getting Q Plan B QD's for the Omega. I'll also probably run the Omega on My 12-5 6.8SPC LMT Upper for deer hunting. That Omega is just so versatile and light it will mount well on almost anything I own that is 300 Mag or smaller. |
|
"Don't tread on Me, I'll shoot!
NRA Life Member |
And speaking of Cans. If anyone owns a SF Ryder 9Ti and is hesitant to shoot 300BLK Subs through it- I have almost 400 rounds on mine with no issues at all. Very quiet too. This is the addaptor I used to mount it-
1/2x28-5/8x24 adaptor |
|
"Don't tread on Me, I'll shoot!
NRA Life Member |
Originally Posted By M-4matus:
And speaking of Cans. If anyone owns a SF Ryder 9Ti and is hesitant to shoot 300BLK Subs through it- I have almost 400 rounds on mine with no issues at all. Very quiet too. This is the addaptor I used to mount it- 1/2x28-5/8x24 adaptor https://www.AR15.Com/media/mediaFiles/484978/20200307_105550-1305545.jpghttps://www.AR15.Com/media/mediaFiles/484978/20200307_105620-1305544.jpg View Quote |
|
|
Originally Posted By M-4matus:
Let see a pic @boerseun View Quote Here she is in all her glory. Had a G2 in a Viking mount and MBUS on it...took it off to help a buddy out who needed a light and never got it back. Thinking about a WML at 12 o clock. You can see the copious use of CLP on the stock This rifle pretty much lives in my barn with a shitty 410 bolt action, because it was so cheap to put together. I think the used Comp M2 is worth more than the entire AR! It's pretty much the only AR I take to the range these days (not enough sadly). Love the balance. @M-4matus |
|
|
|
Originally Posted By RJeff21:
https://www.AR15.Com/media/mediaFiles/294984/75930D9A-EC44-422D-8C6E-E5D39411B685_jpe-1305943.JPG View Quote |
|
|
Originally Posted By RJeff21:
https://www.AR15.Com/media/mediaFiles/294984/75930D9A-EC44-422D-8C6E-E5D39411B685_jpe-1305943.JPG View Quote |
|
|
If I had to be stranded in an island for a long time with a male arfcommer it'd be eesmith. I'm not gay, but I do get lonely. - Kalahnikid
tnsparky Medikeighted Rest In Peace, Brothers. |
Originally Posted By GradyMStack:
https://i.imgur.com/yjzDLBA.jpg 8.3” 300 blackout and 11.5” 5.56 I can’t seem to make up my mind on the optic for the 11.5”. Thinking of either getting a magnifier or trading into a ta33 or ta31. I’d love a nx8 1-8 but just too expensive for me. Had a razor 1-6 on it before and sold it off, was just too heavy. Im swapping my only suppressor between the two until I get my stamp for the YHM turbo t2 I ordered a month or so ago. View Quote I would consider a Trijicon Accupoint 1-4 with Triangle Post Reticle for your 11-5. I currently have mine mounted on my 14-5 KAC URX4. I am planning to purchase another for one of My 11-5 builds. The 1-4 Accupoint W/ Triangle Post provides the fastest Sight Picture & Target Transitions of any LPVO I have ever used. Also, it's light. As seen in the image below, 20oz- Scalarworks Mount included. This is, IMHO the only LPVO I have tried that provides the type of speed One can obtain with an Aimpoint or Eotech. |
|
"Don't tread on Me, I'll shoot!
NRA Life Member |
|
View Quote |
|
"Don't tread on Me, I'll shoot!
NRA Life Member |
Originally Posted By ForestRegion:
https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/125051221061/medium/1583762260/enhance Not my first choice for HD, but for duty or shtf I choose dependability and durability. LMT 10.5" chrome lined 1:7 upper KAC RAS KAC rear sight KAC bits and pieces throughout ALG Defense ACT trigger Elcan Specter DR AO Precision BCG Picked up a salty M952 from @DontBuryMe that will live on this one (because go to rifles should have lights). Fun fact; DontBuryMe was also a previous owner of the pictured Elcan View Quote |
|
"Don't tread on Me, I'll shoot!
NRA Life Member |
|
|
Originally Posted By ForestRegion:
Updated the go to HD blaster: https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/125047600288/large/1583504686/enhance https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/125047600203/large/1583504674/enhance View Quote |
|
|
Originally Posted By Caeser2001:
What riser is that? View Quote View All Quotes View All Quotes Originally Posted By Caeser2001:
Originally Posted By ForestRegion:
Updated the go to HD blaster: https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/125047600288/large/1583504686/enhance https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/125047600203/large/1583504674/enhance |
|
|
"Don't tread on Me, I'll shoot!
NRA Life Member |
Originally Posted By RJeff21:
Leupold Mk1 IMS. View Quote View All Quotes View All Quotes Originally Posted By RJeff21:
Originally Posted By Caeser2001:
Originally Posted By ForestRegion:
Updated the go to HD blaster: https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/125047600288/large/1583504686/enhance https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/125047600203/large/1583504674/enhance |
|
|
Interesting take from a member of SOCOM on his go-to-rifles
Primary Arms 1-8 is kosher in the URGI thread now? |
|
|
Originally Posted By WarDawg:
Currently I would say my Tavor SAR. I just https://www.AR15.Com/media/mediaFiles/26301/D60050FD-CD4C-4F7E-9974-4996530CB55B_jpe-1304282.JPGput this T 31 on it. I need to shoot it. The rifle has been 100%. But honestly, nearly all my ar’s have been also. View Quote |
|
|
Originally Posted By Deputyjason:
https://www.AR15.Com/media/mediaFiles/67272/7079B60B-5E3B-49F1-8E8C-CD0C18C0DE92_jpeg-1135251.JPG All LMT except the Colt BCG and LaRue single stage. Short enough to get out of the cruiser without getting tangled up and maneuvers around nicely. Very accurate. With 75gr Hornady. It’s light enough. I am not crazy about this light and it’ll get replaced by a little Scout eventually. View Quote |
|
"Don't tread on Me, I'll shoot!
NRA Life Member |
Originally Posted By StrangerDanger:
https://i.imgur.com/NFdLdR1.jpg https://i.imgur.com/CkMYYnM.jpg https://i.imgur.com/7Ou3Rnk.jpg https://i.imgur.com/odc0pA9.jpg My go to gun. I started building this rifle in like 2006. When it first started out, it had a Pentagon 3 cell light. Then swapped so many parts out that I think the only thing that remains is the Norgon Ambidextrous magazine release. Its days are numbered since I have a Radian A-DAC lower to swap in which will do away with it. With everything, the rifle weighs in right at 6 pounds. Lower Receiver: V7 2055 Lithium Aluminum Receiver Receiver Extension: V7 2055 Lithium Aluminum Receiver Extension Lock Nut: PWS Ratcheting Castle Nut System Buffer: JP Enterprises Gen2 Silent Buffer Stock: Magpul CTR Milspec Stock Buttpad: Limbsaver buttpad Trigger: Geissele SD3G Trigger Pins: V7 Titanium Geissele Pins Buffer Retainer: V7 Titanium Pin Grip: Executive Ordnance G10 Grip Screw: V7 Titanium Screw Bolt Release: V7 S7 Steel Bolt Release Magazine Button: V7 Aluminum Button Magazine Catch: Norgon Ambidextrous Release Selector: Battle Arms Development BAD CASS ST Takedown Pins: Battle Arms Development Enhanced Titanium Pin Set Upper Receiver: V7 2055 Lithium Aluminum Receiver Barrel: Noveske Skinny Barrel, cut down to 13.1" Flash Suppressor: B.E. Meyers 249F pinned in place Gas Block: V7 Titanium .625" Block, Pinned in place Gas Tube: V7 Inconel midlength Gas Tube Barrel Nut: V7 Titanium Barrel Nut Rail: BCM KMR Magnesium 13" Rail Rail Locking Blocks: Titanium Replacement Set Dust Cover: V7 Aluminum Dust Cover Dust Cover Pin: V7 Aluminum Dust Cover Pin Rail Covers: BCM Covers Sling Mounts: Strike Industries Angled Mounts and V7 QD Sockets Hand Stop: Railscales Karve Bolt Carrier: JP Enterprises Full Mass Bolt Carrier Key: POF Impingement System with Rollercam Gas Rings: Spikes Tactical Ion Bonded Ring Set Firing Pin: V7 Titanium Firing Pin Bolt: Advanced Combat Bolt Charging Handle: Raptor Back Up Iron Sights: Spikes Tactical Billet Set Optic: Trijicon RMR RM01 Optic Mount: Scalarworks LEAP Absolute Co-Witness Sling: BlueForceGear Padded QD Sling Light Mount: Impact Weapon Components Inline Keymod Weapon Light: Surefire M600 Intellibeam Weapon Light Body: Impact Weapon Components M600 Backbone Weapon Light Tailcap: Surefire Scout machined to remove shroud It's been through 10k rounds and has never had a single failure. It'll eat steel case Wolff ammo to good stuff without any wait a minute adjustments. It's been back country hiked across close to a 1,000 miles and more camping trips than I can recall. I hope to send it in for NP3+ plating soon to make it even smoother. View Quote I like Your V7 Build. I have one quite a bit like it- Built for the sake of building Light Weight and LW only. V-7 7075 Receivers, 2055 RE and 2099 Rail, V-7 Small Parts, V-7 Ti BCG, DD 14-5 LW Barrel, Aluminum Buffer Weights, Master of Arms Ti AGB- |
|
"Don't tread on Me, I'll shoot!
NRA Life Member |
|
edit
|
|
"Don't tread on Me, I'll shoot!
NRA Life Member |
Originally Posted By SurtrsFire:
PM sent about another that popped up for sale View Quote View All Quotes View All Quotes |
|
"Don't tread on Me, I'll shoot!
NRA Life Member |
Rebellion against tyrants is obedience to God
|
Originally Posted By DefenderAO:
Will need more time with it to be the go-to but liking its looks https://live.staticflickr.com/65535/49650796007_2fc5fabaa4_h.jpg View Quote |
|
|
|
Originally Posted By ForestRegion:
https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/125051221061/medium/1583762260/enhance Not my first choice for HD, but for duty or shtf I choose dependability and durability. LMT 10.5" chrome lined 1:7 upper KAC RAS KAC rear sight KAC bits and pieces throughout ALG Defense ACT trigger Elcan Specter DR AO Precision BCG Picked up a salty M952 from @DontBuryMe that will live on this one (because go to rifles should have lights). Fun fact; DontBuryMe was also a previous owner of the pictured Elcan View Quote |
|
|
Originally Posted By SurtrsFire:
hell yeah. that thing is sick. View Quote View All Quotes View All Quotes Originally Posted By SurtrsFire:
Originally Posted By DefenderAO:
Will need more time with it to be the go-to but liking its looks https://live.staticflickr.com/65535/49650796007_2fc5fabaa4_h.jpg Shot great. Zero'ed to 50 yards. More rounds to build reliability confidence now. Triarc Systems 11.5" upper LMT sopmod lower Geissele SSA trigger Armageddon ambi CH Aimpoint T2 on LT660 Magpul Pro BUIS Surefire Scout M600 with SR05 dual switch Magpul VFG GA M4SD-K can VTAC 2pt padded sling JP Industries spring and buffer |
|
Rebellion against tyrants is obedience to God
|
Current work rifle setup....
12.5 Centurion Arms upper with SF Warcomp BCM lower Geissele SSA trigger, Airborne CH Aimpoint T2 in LaRue mount Surefire X300U Magpul Pro BUIS, CTR and grip Lead Faucet hand stop Farrow Concepts sling Attached File |
|
Shoot, Move, and Communicate
|
Originally Posted By DefenderAO: Thanks. Shot it today and had to switch the config around a bit due the vfg hitting the gas block on one of the screw nuts. Shot great. Zero'ed to 50 yards. More rounds to build reliability confidence now. https://live.staticflickr.com/65535/49653439602_f39ce6399c_h.jpg Triarc Systems 11.5" upper LMT sopmod lower Geissele SSA trigger Armageddon ambi CH Aimpoint T2 on LT660 Magpul Pro BUIS Surefire Scout M600 with SR05 dual switch Magpul VFG GA M4SD-K can VTAC 2pt padded sling JP Industries spring and buffer View Quote Unfortunately its PSA stuff for the rest of the year |
|
|
Originally Posted By SurtrsFire:
Sexy gun man. If I didnt just blow the entire gun fund on nods for the wife then I'd be building something similar. Unfortunately its PSA stuff for the rest of the year View Quote View All Quotes View All Quotes Originally Posted By SurtrsFire:
Originally Posted By DefenderAO: Thanks. Shot it today and had to switch the config around a bit due the vfg hitting the gas block on one of the screw nuts. Shot great. Zero'ed to 50 yards. More rounds to build reliability confidence now. https://live.staticflickr.com/65535/49653439602_f39ce6399c_h.jpg Triarc Systems 11.5" upper LMT sopmod lower Geissele SSA trigger Armageddon ambi CH Aimpoint T2 on LT660 Magpul Pro BUIS Surefire Scout M600 with SR05 dual switch Magpul VFG GA M4SD-K can VTAC 2pt padded sling JP Industries spring and buffer Unfortunately its PSA stuff for the rest of the year Wait until you start looking into thermal |
|
Rebellion against tyrants is obedience to God
|
No pics-sorry.
LMT Defender, 16" carbine gas GOVT profile with A2, LMT FA BCG with Sprinco ejector spring and BCM 5 coil CS extractor spring with black insert. Fixed F market front. GG&G flip up MADD rear BUIS. Vltor CASV-EL rail Aimpoint Comp M3 with ARMS QD Mount. H2 Buffer with Sprinco Blue buffer spring. LMT Defender lower with Sopmod stock and LMT two stage trigger. BCM original medium gunfighter CH. Magpul MOE plus grip. |
|
|
Originally Posted By DefenderAO:
Gotta have Mrs NODS for sure. Wait until you start looking into thermal View Quote View All Quotes View All Quotes Originally Posted By DefenderAO:
Originally Posted By SurtrsFire:
Originally Posted By DefenderAO: Thanks. Shot it today and had to switch the config around a bit due the vfg hitting the gas block on one of the screw nuts. Shot great. Zero'ed to 50 yards. More rounds to build reliability confidence now. https://live.staticflickr.com/65535/49653439602_f39ce6399c_h.jpg Triarc Systems 11.5" upper LMT sopmod lower Geissele SSA trigger Armageddon ambi CH Aimpoint T2 on LT660 Magpul Pro BUIS Surefire Scout M600 with SR05 dual switch Magpul VFG GA M4SD-K can VTAC 2pt padded sling JP Industries spring and buffer Unfortunately its PSA stuff for the rest of the year Wait until you start looking into thermal |
|
"Don't tread on Me, I'll shoot!
NRA Life Member |
ig @whiskey_axtual
"You can tell we won the war. There's pizza huts here, wifi and dick drawings on everything." -me |
Originally Posted By MONGO45:
Current work rifle setup.... 12.5 Centurion Arms upper with SF Warcomp BCM lower Geissele SSA trigger, Airborne CH Aimpoint T2 in LaRue mount Surefire X300U Magpul Pro BUIS, CTR and grip Lead Faucet hand stop Farrow Concepts sling https://www.AR15.Com/media/mediaFiles/86935/95DF4D5B-27F1-4111-A966-814A07F55ED9_jpe-1313401.JPG View Quote |
|
|
No pics currently- sorry.
Go-to/SHTF is a PSA (cause I’m poor ) 20” A4-ish with A2 furniture, carry handle, and Primary Arms fixed 2.5x ACSS. No light, no sling, ambidextrous selector. Never had a malfunction in the year I’ve had it, so that’s what I roll with. Need to get a PSA M16A2 Lower though... |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.