User Panel
User Panel
User Panel
|
Posted: 2/1/2015 10:16:57 AM EDT
[Last Edit: eaglecp]
[#1]
Work Rig
~ESSTAC Iberian Boar (With MF Swift clips) Can Plus up 3 more mags behind rig in the PC flap pocket if ever needed. ~Mayflower PC Only mod to Iberian was to add 1" Fastex buckle to front. Runs like a Champ! 
cp |
|
|
|
|
Posted: 2/6/2015 3:38:33 AM EDT
[#2]
i have hydro/MAP but it's pretty bulky so i might just get something small like an Armorbak. other than that, i'm just waiting to snag a set of liberator iii's and i'll have all the goodies. i was going to buy some TCI MASTs for the back, but i accomplished the same thing with the help of amazon and radioshack for far less cash.
|
|
|
|
|
Posted: 2/6/2015 9:09:50 AM EDT
[Last Edit: eaglecp]
[#3]
Woodland Rocks, ....
 .... I miss the Good Ole' Days.
cp |
|
|
|
USA
|
Posted: 2/7/2015 12:13:20 PM EDT
[#4]
Quote HistoryOriginally Posted By SilkyJohnson:
i have hydro/MAP but it's pretty bulky so i might just get something small like an Armorbak. other than that, i'm just waiting to snag a set of liberator iii's and i'll have all the goodies. i was going to buy some TCI MASTs for the back, but i accomplished the same thing with the help of amazon and radioshack for far less cash. http://i59.tinypic.com/34q3dc4.jpg http://i59.tinypic.com/wcoa6b.jpg Very nice kit |
|
|
|
Posted: 2/8/2015 3:33:48 PM EDT
[Last Edit: TR0N_0010]
[#5]
|
|
|
|
IN, USA
|
Posted: 2/8/2015 10:47:17 PM EDT
[#6]
Where did you get the valknut patch?
|
|
|
|
Posted: 2/8/2015 10:57:32 PM EDT
[Last Edit: TR0N_0010]
[#7]
Quote HistoryOriginally Posted By helmethair78:
Where did you get the valknut patch? Made it myself |
|
|
|
|
Posted: 2/8/2015 11:09:21 PM EDT
[#8]
Patriot Performance Materials carrier in use today.
HSGI belt 
|
|
|
|
IL, USA
|
Posted: 2/9/2015 12:39:10 AM EDT
[#9]
|
|
|
|
Posted: 2/9/2015 5:36:01 PM EDT
[#10]
|
|
|
|
|
Posted: 2/9/2015 11:02:02 PM EDT
[#11]
Quote HistoryOh shit that's a BA setup. Perfect "if you only could have one PC/rifle/sidearm/helmet" |
|
|
|
BHS
|
Posted: 2/9/2015 11:20:47 PM EDT
[Last Edit: the-answer-is-42]
[#12]
Quote HistoryOriginally Posted By SilkyJohnson:
i have hydro/MAP but it's pretty bulky so i might just get something small like an Armorbak. other than that, i'm just waiting to snag a set of liberator iii's and i'll have all the goodies. i was going to buy some TCI MASTs for the back, but i accomplished the same thing with the help of amazon and radioshack for far less cash. http://i59.tinypic.com/34q3dc4.jpg http://i59.tinypic.com/wcoa6b.jpg What PC is this? Nvm. it's a 6094 |
|
|
|
Posted: 2/11/2015 1:39:32 PM EDT
[#13]
Quote HistoryOriginally Posted By QuickReactions:
Very nice. Dirty gear means that you use it! I have to ask, where did you get the AOR III shirt and what kind is it? Quote HistoryOriginally Posted By QuickReactions:
Originally Posted By GruntActual:
Sorry for the shitty pictures and dirty gear. http://i1178.photobucket.com/albums/x374/maxfetzer/image2.jpghttp://i1178.photobucket.com/albums/x374/maxfetzer/image3.jpg http://i1178.photobucket.com/albums/x374/maxfetzer/image1.jpg Pretty much what I run with the exception of adding removing some stuff, switching weapon systems, comms etc.. Very nice. Dirty gear means that you use it! Originally Posted By ragincajun1919:
<a href="http://s748.photobucket.com/user/ragincajun1919/media/C3BA4A15-3D6A-44B4-9BA3-90A408DC7076_zpsarxa51wb.jpg.html" target="_blank">http://i748.photobucket.com/albums/xx125/ragincajun1919/C3BA4A15-3D6A-44B4-9BA3-90A408DC7076_zpsarxa51wb.jpg</a> I have to ask, where did you get the AOR III shirt and what kind is it? I have a New Balance one and a Crye NWU Type III combat shirt, in that pic is the new balance one |
|
|
|
|
Posted: 2/11/2015 7:48:26 PM EDT
[#14]
|
|
|
|
VA, USA
|
Posted: 2/12/2015 8:52:40 AM EDT
[Last Edit: BenJAMan]
[#15]
Quote HistoryOriginally Posted By SilkyJohnson:
i have hydro/MAP but it's pretty bulky so i might just get something small like an Armorbak. other than that, i'm just waiting to snag a set of liberator iii's and i'll have all the goodies. i was going to buy some TCI MASTs for the back, but i accomplished the same thing with the help of amazon and radioshack for far less cash. http://i59.tinypic.com/34q3dc4.jpg http://i59.tinypic.com/wcoa6b.jpg That is awesome  could you PM me a parts list or post a work up of how you did It I need the same thing for my coms
|
|
|
|
Posted: 2/18/2015 1:38:16 AM EDT
[#16]
Slick vs Tact, does anyone run both?
|
|
|
|
CA, USA
|
Posted: 2/18/2015 1:58:26 AM EDT
[#17]
Here's my first rig
Banshee PC Highcom Plates 4SAS7 IV ATS Triple M4 Rifle Pouches Tactical Tailor Single M4 Pouch KYWI Double Pistol Pouch 
|
|
|
|
Posted: 2/18/2015 3:40:56 PM EDT
[#18]
My plate carrier and war belt, still working on it. If anyone has any suggestions I'm open to them. I plan on painting the holster a FDE color.
 " />
 " />
|
|
|
|
USA
|
Posted: 2/19/2015 12:01:45 AM EDT
[#19]
Quote HistoryOriginally Posted By SilkyJohnson:
i have hydro/MAP but it's pretty bulky so i might just get something small like an Armorbak. other than that, i'm just waiting to snag a set of liberator iii's and i'll have all the goodies. i was going to buy some TCI MASTs for the back, but i accomplished the same thing with the help of amazon and radioshack for far less cash. http://i59.tinypic.com/34q3dc4.jpg http://i59.tinypic.com/wcoa6b.jpg |
|
|
|
Posted: 2/19/2015 12:40:32 AM EDT
[Last Edit: fridge72]
[#20]
Shellback banshee. Needs more rifle mags, but that's just me..
Edit: wrong carrier reference. I don't read good. 
|
|
|
|
|
Posted: 2/19/2015 12:43:19 AM EDT
[#21]
Quote HistoryOriginally Posted By LT1762:
Who makes this plate carrier? Thanks Quote HistoryOriginally Posted By LT1762:
Originally Posted By SilkyJohnson:
i have hydro/MAP but it's pretty bulky so i might just get something small like an Armorbak. other than that, i'm just waiting to snag a set of liberator iii's and i'll have all the goodies. i was going to buy some TCI MASTs for the back, but i accomplished the same thing with the help of amazon and radioshack for far less cash. http://i59.tinypic.com/34q3dc4.jpg http://i59.tinypic.com/wcoa6b.jpg looks like my 6094 |
|
|
|
USA
|
Posted: 2/19/2015 10:33:55 AM EDT
[#22]
Quote HistoryOriginally Posted By mrrick:
looks like my 6094 Quote HistoryOriginally Posted By mrrick:
Originally Posted By LT1762:
Originally Posted By SilkyJohnson:
i have hydro/MAP but it's pretty bulky so i might just get something small like an Armorbak. other than that, i'm just waiting to snag a set of liberator iii's and i'll have all the goodies. i was going to buy some TCI MASTs for the back, but i accomplished the same thing with the help of amazon and radioshack for far less cash. http://i59.tinypic.com/34q3dc4.jpg http://i59.tinypic.com/wcoa6b.jpg looks like my 6094 This. LBT was offering their 6094 in woodland over the holidays. |
|
|
|
Posted: 2/19/2015 4:12:27 PM EDT
[#23]
Quote HistoryOriginally Posted By cmcflex:
This. LBT was offering their 6094 in woodland over the holidays. Quote HistoryOriginally Posted By cmcflex:
Originally Posted By mrrick:
Originally Posted By LT1762:
Originally Posted By SilkyJohnson:
i have hydro/MAP but it's pretty bulky so i might just get something small like an Armorbak. other than that, i'm just waiting to snag a set of liberator iii's and i'll have all the goodies. i was going to buy some TCI MASTs for the back, but i accomplished the same thing with the help of amazon and radioshack for far less cash. http://i59.tinypic.com/34q3dc4.jpg http://i59.tinypic.com/wcoa6b.jpg looks like my 6094 This. LBT was offering their 6094 in woodland over the holidays. Call the retail store. Mine was made in 2013. |
|
|
|
USA
|
Posted: 2/19/2015 5:14:57 PM EDT
[#24]
Sweet, so a LBT 6094, Thanks guys
|
|
|
USA
|
Posted: 2/19/2015 5:57:39 PM EDT
[#25]
Quote HistoryOriginally Posted By SilkyJohnson:
Call the retail store. Mine was made in 2013. Quote HistoryOriginally Posted By SilkyJohnson:
Originally Posted By cmcflex:
/snip This. LBT was offering their 6094 in woodland over the holidays. Call the retail store. Mine was made in 2013. Good to know. Sorry for player hatin'. 
|
|
|
|
Posted: 2/21/2015 3:54:34 AM EDT
[#26]
Quote HistoryOriginally Posted By pbjunkiee:
Patriot Performance Materials carrier in use today. HSGI belt https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/10988912_10204675075934787_7364793511355598187_n.jpg?oh=1a6805096fc416c2e6159a2c7b70a0de&oe=5562545A&__gda__=1431175743_f6387f1853a4afbb8a2c08b1a32c88fd https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/541637_10204675077174818_6570710427470266979_n.jpg?oh=2691687433e188120cc083e598cf54e8&oe=5592C8A1&__gda__=1432110283_691c42ca45a3c8775e88c9a9a708f4b9 Really digging the tactical loafers 
|
|
|
|
|
Posted: 2/21/2015 11:18:06 AM EDT
[#27]
Quote HistoryOriginally Posted By Duramaxman0909:
My plate carrier and war belt, still working on it. If anyone has any suggestions I'm open to them. I plan on painting the holster a FDE color. http://<a href=http://i50.photobucket.com/albums/f326/jholdsworth71/FF513F68-4F49-4E4F-9CBF-DA48CBEF70CE_zpskh9zvssw.jpg</a>" /> http://<a href=http://i50.photobucket.com/albums/f326/jholdsworth71/B993FDED-FCC6-4E74-89BE-C78BB6486462_zps1cj4numf.jpg</a>" /> Other than the Serpa holster- against which there are numerous documented cases of failure- your kit looks good. Minimalist, and it doesn't look like you gave in to any impulse to fill every bit of available MOLLE space. I'd consider a smaller dump pouch (or using a cargo pocket instead, like I do) and replacing the triple mag pouch with Esstac Kywi's. What's in your med pouch? |
|
|
|
|
Posted: 2/21/2015 3:00:19 PM EDT
[#28]
|
|
|
|
|
Posted: 2/21/2015 3:48:23 PM EDT
[#29]
Are those smokes on the back of your carrier? if so what brand? and would you suggest them?
|
|
|
|
|
Posted: 2/21/2015 3:50:54 PM EDT
[#30]
Quote HistoryOriginally Posted By Ledbetter117:
Are those smokes on the back of your carrier? if so what brand? and would you suggest them? http://www.hustlepaintball.com/Enola-Gaye-Wire-Pull-Smoke-Grenade?&search_id=2398230 Haven't had chance to try one out yet, but the multitude of videos on YouTube sold me on them. |
|
|
|
TX, USA
|
Posted: 2/21/2015 4:10:22 PM EDT
[#31]
Quote HistoryOriginally Posted By TR0N_0010:
http://www.hustlepaintball.com/Enola-Gaye-Wire-Pull-Smoke-Grenade?&search_id=2398230 Haven't had chance to try one out yet, but the multitude of videos on YouTube sold me on them. Quote HistoryOriginally Posted By TR0N_0010:
Originally Posted By Ledbetter117:
Are those smokes on the back of your carrier? if so what brand? and would you suggest them? http://www.hustlepaintball.com/Enola-Gaye-Wire-Pull-Smoke-Grenade?&search_id=2398230 Haven't had chance to try one out yet, but the multitude of videos on YouTube sold me on them. I bought a few for shits and giggles no where near as impressive as you'd think. I suggest marine smoke grenades they pump out so much more smoke. |
|
|
|
Posted: 2/21/2015 4:19:19 PM EDT
[#32]
Quote HistoryOriginally Posted By vanquished:
I bought a few for shits and giggles no where near as impressive as you'd think. I suggest marine smoke grenades they pump out so much more smoke. Quote HistoryOriginally Posted By vanquished:
Originally Posted By TR0N_0010:
Originally Posted By Ledbetter117:
Are those smokes on the back of your carrier? if so what brand? and would you suggest them? http://www.hustlepaintball.com/Enola-Gaye-Wire-Pull-Smoke-Grenade?&search_id=2398230 Haven't had chance to try one out yet, but the multitude of videos on YouTube sold me on them. I bought a few for shits and giggles no where near as impressive as you'd think. I suggest marine smoke grenades they pump out so much more smoke. I bought them for emergency signal while hiking/camping/hunting by myself. The small ones definitely don't put out enough smoke for concealment. |
|
|
|
|
Posted: 2/21/2015 4:57:34 PM EDT
[#33]
Ok Gents, I finally have a reasonable contribution to make. Tear it apart as you see fit.
 " />
The foundation FS Strandhögg SAPI cut in medium LvL IV stand alone plates LvL IIIA soft armor backers  " />
 " />
The Goods FS admin pouch D3 chest rig MR Mystery Cinch I've enjoyed the set up so far. Though there are still a few more tweaks to do. Looking to hopefully grab some side plates, a TQ pouch or two, and eventually add a radio to this set up. But all comes with time.... and lots of money
|
|
|
|
|
Posted: 2/21/2015 5:01:37 PM EDT
[Last Edit: TDunn]
[#34]
Mayflower APC
Tron Tactical TQ-H Raven Tactical Flat IFAK Radio Case for HT750 D3CR I have another mini CR (custom VOCR) on the way from EGL that is much lower profile for use hog hunting and low profile defensive use. 2 rifle mags, 2 pistol mags, 1 Stuffit, 1 GP 
Mods to my Crye Nightcap for hog use - 15 oz as shown with the lights 
|
|
|
|
BHS
|
Posted: 2/21/2015 6:09:04 PM EDT
[#35]
Well after starting this thread and then selling my first PC....I finally have another one.
Crye JPC with 3M/Ceradyne MaxPro Level IV Plates and PIG shoulder pads. I just waned something simple and low profile, not an entire loaded PC. 
|
|
|
USA
|
Posted: 2/22/2015 9:29:54 PM EDT
[#36]
Shellback Banshee Highcom plates 5.11 single Tactical tailor triple shingle TK with some shock cord to attach. HSGI bleeder blowout with quick clot and an izzy. Yes those sheers are purple. |
|
|
BHS
|
Posted: 2/22/2015 10:24:10 PM EDT
[#37]
Decided to do one those fancy newfangled loadout pictures
I feel like an airsofter.
|
|
|
|
Posted: 2/24/2015 7:38:43 PM EDT
[Last Edit: GIR-101]
[#38]
Got my plates in today.
Quickly discovered that my previous choice of carrier, while economic, does not really quite work as well as hoped as the plates sit low in it. 
I tightened the shoulder straps on that thing WAY the fuck up and it did not get very much better than whats in the picture. Any ideas on how to lift the plate, or is the best option to just buy a new PC? ETA: A closer shot with it tightened up even more. Still low, but at this point its near impossible to get off and on. Index finger is the point of my clavicle, middle finger is top of the plate. 
|
|
|
|
|
Posted: 2/24/2015 8:42:55 PM EDT
[#39]
Quote HistoryOriginally Posted By GIR-101:
Got my plates in today. Quickly discovered that my previous choice of carrier, while economic, does not really quite work as well as hoped as the plates sit low in it. http://i297.photobucket.com/albums/mm211/GIR101_bucket/Mobile%20Uploads/image_1.jpg I tightened the shoulder straps on that thing WAY the fuck up and it did not get very much better than whats in the picture. Any ideas on how to lift the plate, or is the best option to just buy a new PC? ETA: A closer shot with it tightened up even more. Still low, but at this point its near impossible to get off and on. Index finger is the point of my clavicle, middle finger is top of the plate. http://i297.photobucket.com/albums/mm211/GIR101_bucket/Mobile%20Uploads/image_2.jpg A lot of us have had the same problem. The best solution is to get some closed cell foam (like the stuff you get for making tool cut-outs) and cut it to a width that will lift the plate to the proper height, then tape it to the plate. 
|
|
|
|
MI, USA
|
Posted: 2/24/2015 9:03:40 PM EDT
[#40]
Quote HistoryOriginally Posted By schaffer:
<a href="http://s1078.photobucket.com/user/kyschauer/media/0222150203c-1_zpsefvssoeq.jpg.html" target="_blank">http://i1078.photobucket.com/albums/w498/kyschauer/0222150203c-1_zpsefvssoeq.jpg</a> Shellback Banshee Highcom plates 5.11 single Tactical tailor triple shingle TK with some shock cord to attach. HSGI bleeder blowout with quick clot and an izzy. Yes those sheers are purple. Not nit-picking, but the snaps on the HSGI bleeder are supposed to go through the holes of the sheers to hold them in. Nice set up. |
|
|
|
Posted: 2/24/2015 9:13:10 PM EDT
[#41]
Quote HistoryOriginally Posted By TR0N_0010:
A lot of us have had the same problem. The best solution is to get some closed cell foam (like the stuff you get for making tool cut-outs) and cut it to a width that will lift the plate to the proper height, then tape it to the plate. https://farm4.staticflickr.com/3896/14334352705_8950f19dd9_b.jpg Awesome idea, thank you. I'll try that and see how it goes |
|
|
|
USA
|
Posted: 2/24/2015 9:30:56 PM EDT
[#42]
Quote HistoryOriginally Posted By howler86:
Not nit-picking, but the snaps on the HSGI bleeder are supposed to go through the holes of the sheers to hold them in. Nice set up. Quote HistoryOriginally Posted By howler86:
Originally Posted By schaffer:
<a href="http://s1078.photobucket.com/user/kyschauer/media/0222150203c-1_zpsefvssoeq.jpg.html" target="_blank">http://i1078.photobucket.com/albums/w498/kyschauer/0222150203c-1_zpsefvssoeq.jpg</a> Shellback Banshee Highcom plates 5.11 single Tactical tailor triple shingle TK with some shock cord to attach. HSGI bleeder blowout with quick clot and an izzy. Yes those sheers are purple. Not nit-picking, but the snaps on the HSGI bleeder are supposed to go through the holes of the sheers to hold them in. Nice set up. I know, the snap is just stiff as can be and they stay put pretty good. Only changes i foresee is going to two esstac double pouches on the front and moving the IFAK over to the flap. I also have one of the buckles clipped and replaced with a G-Hook from SKD. It's very hard for me to should the rifle with the thick buckles. |
|
|
|
Posted: 2/26/2015 3:24:35 PM EDT
[#43]
Quote HistoryOriginally Posted By schaffer:
<a href="http://s1078.photobucket.com/user/kyschauer/media/0222150203c-1_zpsefvssoeq.jpg.html" target="_blank">http://i1078.photobucket.com/albums/w498/kyschauer/0222150203c-1_zpsefvssoeq.jpg</a> Shellback Banshee Highcom plates 5.11 single Tactical tailor triple shingle TK with some shock cord to attach. HSGI bleeder blowout with quick clot and an izzy. Yes those sheers are purple. Is the TT shingle loose enough to get the PMAGs back in one handed? I like the shingle idea but I can't seem to find one that allows that. |
|
|
|
|
Posted: 2/26/2015 3:34:10 PM EDT
[#44]
Quote HistoryOriginally Posted By Blanco_Diablo:
Is the TT shingle loose enough to get the PMAGs back in one handed? I like the shingle idea but I can't seem to find one that allows that. Quote HistoryOriginally Posted By Blanco_Diablo:
Originally Posted By schaffer:
<a href="http://s1078.photobucket.com/user/kyschauer/media/0222150203c-1_zpsefvssoeq.jpg.html" target="_blank">http://i1078.photobucket.com/albums/w498/kyschauer/0222150203c-1_zpsefvssoeq.jpg</a> Shellback Banshee Highcom plates 5.11 single Tactical tailor triple shingle TK with some shock cord to attach. HSGI bleeder blowout with quick clot and an izzy. Yes those sheers are purple. Is the TT shingle loose enough to get the PMAGs back in one handed? I like the shingle idea but I can't seem to find one that allows that. I use the same pouch and yes you can put PMags back in one handed. |
|
|
|
USA
|
Posted: 2/27/2015 2:16:06 AM EDT
[Last Edit: schaffer]
[#45]
Quote HistoryOriginally Posted By D-RAS03:
I use the same pouch and yes you can put PMags back in one handed. Quote HistoryOriginally Posted By D-RAS03:
Originally Posted By Blanco_Diablo:
Originally Posted By schaffer:
<a href="http://s1078.photobucket.com/user/kyschauer/media/0222150203c-1_zpsefvssoeq.jpg.html" target="_blank">http://i1078.photobucket.com/albums/w498/kyschauer/0222150203c-1_zpsefvssoeq.jpg</a> Shellback Banshee Highcom plates 5.11 single Tactical tailor triple shingle TK with some shock cord to attach. HSGI bleeder blowout with quick clot and an izzy. Yes those sheers are purple. Is the TT shingle loose enough to get the PMAGs back in one handed? I like the shingle idea but I can't seem to find one that allows that. I use the same pouch and yes you can put PMags back in one handed. The only issue i have is getting the bungee out of the way, which isn't even that big of a deal. They usually slide right in without a problem. The TT triple was on the PC when i bought it. I'm probably going to get some kiwi pouches when i get the cash. I'm a fan of open top mag pouches, but since my rig rides around in a car or the back of an SUV most of the time the bungee retention works nice. |
|
|
|
Posted: 2/27/2015 4:21:36 AM EDT
[#46]
Are the Banshee and Mayflower APC still the go-to plate carriers?
|
|
|
|
|
Posted: 2/27/2015 9:37:45 AM EDT
[#47]
Quote HistoryOriginally Posted By schaffer:
The only issue i have is getting the bungee out of the way, which isn't even that big of a deal. They usually slide right in without a problem. The TT triple was on the PC when i bought it. I'm probably going to get some kiwi pouches when i get the cash. I'm a fan of open top mag pouches, but since my rig rides around in a car or the back of an SUV most of the time the bungee retention works nice. Quote HistoryOriginally Posted By schaffer:
Originally Posted By D-RAS03:
Originally Posted By Blanco_Diablo:
Originally Posted By schaffer:
<a href="http://s1078.photobucket.com/user/kyschauer/media/0222150203c-1_zpsefvssoeq.jpg.html" target="_blank">http://i1078.photobucket.com/albums/w498/kyschauer/0222150203c-1_zpsefvssoeq.jpg</a> Shellback Banshee Highcom plates 5.11 single Tactical tailor triple shingle TK with some shock cord to attach. HSGI bleeder blowout with quick clot and an izzy. Yes those sheers are purple. Is the TT shingle loose enough to get the PMAGs back in one handed? I like the shingle idea but I can't seem to find one that allows that. I use the same pouch and yes you can put PMags back in one handed. The only issue i have is getting the bungee out of the way, which isn't even that big of a deal. They usually slide right in without a problem. The TT triple was on the PC when i bought it. I'm probably going to get some kiwi pouches when i get the cash. I'm a fan of open top mag pouches, but since my rig rides around in a car or the back of an SUV most of the time the bungee retention works nice. I had that problem at first too but a little bit of practice and I don't even notice it now. |
|
|
|
|
Posted: 2/27/2015 10:15:50 AM EDT
[#48]
Quote HistoryOriginally Posted By Burnsy87:
Are the Banshee and Mayflower APC still the go-to plate carriers? First spear and velocity systems also have some pretty top shit. |
|
|
|
|
Posted: 2/27/2015 10:19:19 AM EDT
[#49]
Quote HistoryOriginally Posted By CrazyWhiteGuy:
First spear and velocity systems also have some pretty top shit. Quote HistoryOriginally Posted By CrazyWhiteGuy:
Originally Posted By Burnsy87:
Are the Banshee and Mayflower APC still the go-to plate carriers? First spear and velocity systems also have some pretty top shit. Banshee, no. Mayflower/Velocity Systems APC is a great high quality PC at a very attractive price. That said, ill be going with crye in the future. |
|
|
|
|
Posted: 2/27/2015 10:21:08 AM EDT
[Last Edit: CrazyWhiteGuy]
[#50]
Quote HistoryOriginally Posted By espantoonMP:
Banshee, no. Mayflower/Velocity Systems APC is a great high quality PC at a very attractive price. That said, ill be going with crye in the future. Quote HistoryOriginally Posted By espantoonMP:
Originally Posted By CrazyWhiteGuy:
Originally Posted By Burnsy87:
Are the Banshee and Mayflower APC still the go-to plate carriers? First spear and velocity systems also have some pretty top shit. Banshee, no. Mayflower/Velocity Systems APC is a great high quality PC at a very attractive price. That said, ill be going with crye in the future. My CPC with chassis plate bags is the most comfortable carrier I've ever worn. Ain't worth the money though. |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
