User Panel
Originally Posted By compuvette:
I posted this in the silencer section this morning, but I figured you guys would find it interesting as well. I had a couple long calls with Surefire and Silencer Shop yesterday regarding the SOCOM 556 RC, the 556 SB, and the 556 MG. If you've looked at the specs, the SB and RC are the same external size and weigh the same. The MG is about an inch and a half longer and weighs much more. The MG has much thicker baffles and is designed for use on belt-fed MG's firing long bursts. The difference between the SB and RC is that they took the super thick blast baffle from the MG and stuck it in the SB. Everything else is the same as the RC. Warranty for barrel length is down to 10" on the RC and the SB is warrantied for barrels "shorter than 10". I asked if a 7.5" barrel was covered and Surefire said yes. They would also re-core due to baffle erosion. The SB does meter a little higher than the RC because the thicker blast baffle cuts down on volume in the can. Silencer Shop states as a shooter you can't here the difference, but the meter can. Anyway, I picked up a second SB this morning instead of an RC. Silencer Shop restocked on the RC, but the price is back up over $1100. The SB is still at the lower $963. For a thicker blast baffle and basically the same sound suppression and $200 less, it's a no-brainer..... ETA - figured I'd better post up some pics since it's the top of the page.... <a href="http://s483.photobucket.com/user/compuvette/media/40d833152c98b4c7262f92b785300856_zps98a465c0.jpg.html" target="_blank">http://i483.photobucket.com/albums/rr193/compuvette/40d833152c98b4c7262f92b785300856_zps98a465c0.jpg</a> <a href="http://s483.photobucket.com/user/compuvette/media/87a3bdcb6cee6305b242b9eca7075d3d_zpsd4233d67.jpg.html" target="_blank">http://i483.photobucket.com/albums/rr193/compuvette/87a3bdcb6cee6305b242b9eca7075d3d_zpsd4233d67.jpg</a> There's a 762-RC and a 556-Mini in that bottom picture. My first 556-SB is still waiting on form 3...... View Quote Thanks for the info, it does sound like a no brainer, but for me, the 7.62 mini is the no brainer of the bunch, as you can use it for 300, where a suppressor really shines. |
|
|
I was also under the impression that a the SB had slightly larger baffle bore diameter. I guess that isn't true.
|
|
|
Originally Posted By TheTacticalCoyote:
I was also under the impression that a the SB had slightly larger baffle bore diameter. I guess that isn't true. View Quote It does have a larger bore http://www.surefire.com/tactical-equipment/sound-suppressors/rifle-carbine-suppressors/556-mm-223-caliber/socom556-sb.html |
|
I hope my guns killed someone before they moved in with me. Shit, I hope they go out at night and kill bad guys while I'm sleeping.-30calTBLkid
|
|
Originally Posted By StealthGuy:
Ordered a SR-D-IT and teardrop forward assist. Hopefully, I'll be getting a tracking number from TNVC today or tomorrow. <a href="http://s578.photobucket.com/user/DeltaBF2s/media/Mobile%20Uploads/image-30.jpg.html" target="_blank">http://i578.photobucket.com/albums/ss227/DeltaBF2s/Mobile%20Uploads/image-30.jpg</a> Forward assist came early. <a href="http://s578.photobucket.com/user/DeltaBF2s/media/Mobile%20Uploads/image-31.jpg.html" target="_blank">http://i578.photobucket.com/albums/ss227/DeltaBF2s/Mobile%20Uploads/image-31.jpg</a> View Quote Is that a DPMS or Bushmaster forward assist..........slightly different from old Colts? |
|
|
Fulton Armory. Don't know of any differences. Forward assist are forward assist as far as I know.
|
|
|
Originally Posted By compuvette:
I posted this in the silencer section this morning, but I figured you guys would find it interesting as well. I had a couple long calls with Surefire and Silencer Shop yesterday regarding the SOCOM 556 RC, the 556 SB, and the 556 MG. If you've looked at the specs, the SB and RC are the same external size and weigh the same. The MG is about an inch and a half longer and weighs much more. The MG has much thicker baffles and is designed for use on belt-fed MG's firing long bursts. The difference between the SB and RC is that they took the super thick blast baffle from the MG and stuck it in the SB. Everything else is the same as the RC. Warranty for barrel length is down to 10" on the RC and the SB is warrantied for barrels "shorter than 10". I asked if a 7.5" barrel was covered and Surefire said yes. They would also re-core due to baffle erosion. The SB does meter a little higher than the RC because the thicker blast baffle cuts down on volume in the can. Silencer Shop states as a shooter you can't here the difference, but the meter can. Anyway, I picked up a second SB this morning instead of an RC. Silencer Shop restocked on the RC, but the price is back up over $1100. The SB is still at the lower $963. For a thicker blast baffle and basically the same sound suppression and $200 less, it's a no-brainer..... ETA - figured I'd better post up some pics since it's the top of the page.... <a href="http://s483.photobucket.com/user/compuvette/media/40d833152c98b4c7262f92b785300856_zps98a465c0.jpg.html" target="_blank">http://i483.photobucket.com/albums/rr193/compuvette/40d833152c98b4c7262f92b785300856_zps98a465c0.jpg</a> <a href="http://s483.photobucket.com/user/compuvette/media/87a3bdcb6cee6305b242b9eca7075d3d_zpsd4233d67.jpg.html" target="_blank">http://i483.photobucket.com/albums/rr193/compuvette/87a3bdcb6cee6305b242b9eca7075d3d_zpsd4233d67.jpg</a> There's a 762-RC and a 556-Mini in that bottom picture. My first 556-SB is still waiting on form 3...... Yes, that's all my stuff waiting in "jail". More inbound. Hurry up ATF!!!! View Quote Is that Freedom, or another gun shop? |
|
|
Originally Posted By asmig:
I have a 7.62 mini and I think the reduction in performance on 5.56 is quite noticeable. I'm currently hunting for a deal on the 5.56 socom now. I will say that I was impressed by the 7.62 mini on .308 and 7.62x39 so get both if you can https://farm9.staticflickr.com/8679/15873801987_cfefe6423c_h.jpg View Quote View All Quotes View All Quotes Originally Posted By asmig:
Originally Posted By G_MAN:
Thanks for the info, it does sound like a no brainer, but for me, the 7.62 mini is the no brainer of the bunch, as you can use it for 300, where a suppressor really shines. I have a 7.62 mini and I think the reduction in performance on 5.56 is quite noticeable. I'm currently hunting for a deal on the 5.56 socom now. I will say that I was impressed by the 7.62 mini on .308 and 7.62x39 so get both if you can https://farm9.staticflickr.com/8679/15873801987_cfefe6423c_h.jpg I have a 762 Mini and 556 RC and the performance is pretty doggone close on my 12.5" and 16" 5.56. |
|
|
Originally Posted By TheTacticalCoyote:
I have a 762 Mini and 556 RC and the performance is pretty doggone close on my 12.5" and 16" 5.56. View Quote View All Quotes View All Quotes Originally Posted By TheTacticalCoyote:
Originally Posted By asmig:
Originally Posted By G_MAN:
Thanks for the info, it does sound like a no brainer, but for me, the 7.62 mini is the no brainer of the bunch, as you can use it for 300, where a suppressor really shines. I have a 7.62 mini and I think the reduction in performance on 5.56 is quite noticeable. I'm currently hunting for a deal on the 5.56 socom now. I will say that I was impressed by the 7.62 mini on .308 and 7.62x39 so get both if you can https://farm9.staticflickr.com/8679/15873801987_cfefe6423c_h.jpg I have a 762 Mini and 556 RC and the performance is pretty doggone close on my 12.5" and 16" 5.56. I have tried it on a 14.5 upper and I agree the performance gap is minimized on longer barrels. On a 10.3 barrel you can easily hear the difference. |
|
|
Originally Posted By asmig:
I have tried it on a 14.5 upper and I agree the performance gap is minimized on longer barrels. On a 10.3 barrel you can easily hear the difference. View Quote View All Quotes View All Quotes Originally Posted By asmig:
Originally Posted By TheTacticalCoyote:
Originally Posted By asmig:
Originally Posted By G_MAN:
Thanks for the info, it does sound like a no brainer, but for me, the 7.62 mini is the no brainer of the bunch, as you can use it for 300, where a suppressor really shines. I have a 7.62 mini and I think the reduction in performance on 5.56 is quite noticeable. I'm currently hunting for a deal on the 5.56 socom now. I will say that I was impressed by the 7.62 mini on .308 and 7.62x39 so get both if you can https://farm9.staticflickr.com/8679/15873801987_cfefe6423c_h.jpg I have a 762 Mini and 556 RC and the performance is pretty doggone close on my 12.5" and 16" 5.56. I have tried it on a 14.5 upper and I agree the performance gap is minimized on longer barrels. On a 10.3 barrel you can easily hear the difference. My experience as well. Same suppressor on a 12" and a 16" produces a noticeable difference. |
|
The left supports war as long as it can have the welfare state, and the right supports the welfare state as long as it can have war. Garet Garrett "The Peoples Pottage"
|
|
Originally Posted By 1qsb28:
Is there anyone left that has the DD FDE Mk18 rails in stock or are they now completely unobtainum without buying a complete upper or rifle from DD? View Quote I was feeling like it was pretty fuggin hopeless but had an FDE one pop up yesterday for 300 shipped. Jumped on it. If you're patient it'll come. There's a black one for 300 shipped in a thread for 300 shipped if you plan to paint but the clone police will cuff you quick ;) |
|
|
View Quote 416. Cool gun though. |
|
|
Originally Posted By StealthGuy:
416. Cool gun though. View Quote View All Quotes View All Quotes Originally Posted By StealthGuy:
416. Cool gun though. Dang, I thought it was Block I. |
|
|
|
Originally Posted By ECPrevatte:
Dang, I thought it was Block I. View Quote View All Quotes View All Quotes Originally Posted By ECPrevatte:
Originally Posted By StealthGuy:
416. Cool gun though. Dang, I thought it was Block I. Looks like the guy on the right might have one. Can't tell. |
|
|
Originally Posted By StealthGuy:
Looks like the guy on the right might have one. Can't tell. View Quote View All Quotes View All Quotes Originally Posted By StealthGuy:
Originally Posted By ECPrevatte:
Originally Posted By StealthGuy:
416. Cool gun though. Dang, I thought it was Block I. Looks like the guy on the right might have one. Can't tell. Yeah, I think I can make out an FSB in the full-size pic. |
|
"Patriotism is supporting your country all the time, and your government when it deserves it." - Mark Twain
|
Originally Posted By StealthGuy:
Ordered a SR-D-IT and teardrop forward assist. Hopefully, I'll be getting a tracking number from TNVC today or tomorrow. <a href="http://s578.photobucket.com/user/DeltaBF2s/media/Mobile%20Uploads/image-30.jpg.html" target="_blank">http://i578.photobucket.com/albums/ss227/DeltaBF2s/Mobile%20Uploads/image-30.jpg</a> Forward assist came early. <a href="http://s578.photobucket.com/user/DeltaBF2s/media/Mobile%20Uploads/image-31.jpg.html" target="_blank">http://i578.photobucket.com/albums/ss227/DeltaBF2s/Mobile%20Uploads/image-31.jpg</a> View Quote Stealth........here's a pic of an old Colt I have. It's what came on 603's/M16/M16A1's et al. I wonder what shows up on issue carbines now, old Colt or new version from various mfgs? All the new mfg fa's are flat across the grooves, with some mfg's having the grooves/splines squared off instead of V'd. The old Colts look like they're worn, but that's the way they came new. |
|
|
|
OK! Now were cooking with gas. Other than two tax stamps, a Wilcox mount and a taper pin I'm getting pretty close. The mod 0 is just mocked up, nothings been torqued on so ignore that, but were getting close.
" /> |
|
|
Originally Posted By Eyekahn:
Did a little shooting with a buddy today. Can't believe I was going to sell this upper. <a href="http://s1289.photobucket.com/user/cwm556/media/85D826A3-5B5D-4ADA-8DE3-31CE9545BFCF_zpsmhjzrwjd.jpg.html" target="_blank">http://i1289.photobucket.com/albums/b510/cwm556/85D826A3-5B5D-4ADA-8DE3-31CE9545BFCF_zpsmhjzrwjd.jpg</a> Here is a video of a 2-2-4-2-2 drill. I was faster suppressed. <a href="http://i1289.photobucket.com/albums/b510/cwm556/BC2E5D0E-8F45-4322-9229-E75055D3E647_zps0zxbhi9c.mp4" target="_blank">http://i1289.photobucket.com/albums/b510/cwm556/th_BC2E5D0E-8F45-4322-9229-E75055D3E647_zps0zxbhi9c.jpg</a> View Quote Badass shooting man! That is a hell of a fast controlled trigger finger. Luckily you werent crazy enough to sell that this upper! |
|
|
Originally Posted By Tmender03:
Is that Freedom, or another gun shop? View Quote View All Quotes View All Quotes Originally Posted By Tmender03:
Originally Posted By compuvette:
I posted this in the silencer section this morning, but I figured you guys would find it interesting as well. I had a couple long calls with Surefire and Silencer Shop yesterday regarding the SOCOM 556 RC, the 556 SB, and the 556 MG. If you've looked at the specs, the SB and RC are the same external size and weigh the same. The MG is about an inch and a half longer and weighs much more. The MG has much thicker baffles and is designed for use on belt-fed MG's firing long bursts. The difference between the SB and RC is that they took the super thick blast baffle from the MG and stuck it in the SB. Everything else is the same as the RC. Warranty for barrel length is down to 10" on the RC and the SB is warrantied for barrels "shorter than 10". I asked if a 7.5" barrel was covered and Surefire said yes. They would also re-core due to baffle erosion. The SB does meter a little higher than the RC because the thicker blast baffle cuts down on volume in the can. Silencer Shop states as a shooter you can't here the difference, but the meter can. Anyway, I picked up a second SB this morning instead of an RC. Silencer Shop restocked on the RC, but the price is back up over $1100. The SB is still at the lower $963. For a thicker blast baffle and basically the same sound suppression and $200 less, it's a no-brainer..... ETA - figured I'd better post up some pics since it's the top of the page.... <a href="http://s483.photobucket.com/user/compuvette/media/40d833152c98b4c7262f92b785300856_zps98a465c0.jpg.html" target="_blank">http://i483.photobucket.com/albums/rr193/compuvette/40d833152c98b4c7262f92b785300856_zps98a465c0.jpg</a> <a href="http://s483.photobucket.com/user/compuvette/media/87a3bdcb6cee6305b242b9eca7075d3d_zpsd4233d67.jpg.html" target="_blank">http://i483.photobucket.com/albums/rr193/compuvette/87a3bdcb6cee6305b242b9eca7075d3d_zpsd4233d67.jpg</a> There's a 762-RC and a 556-Mini in that bottom picture. My first 556-SB is still waiting on form 3...... Yes, that's all my stuff waiting in "jail". More inbound. Hurry up ATF!!!! Is that Freedom, or another gun shop? Hillside in Roanoke. I've been in contact again with Surefire again and apparently the info I revieved was wrong. The bore is bigger on the SB. I ended up with a black and an FDE SB in addition to the 556 Mini and the 762 RC in the picture. |
|
"He had the right hand of the devil strapped tightly to his side."-The Last Cowboy
|
Originally Posted By compuvette:
Hillside in Roanoke. I've been in contact again with Surefire again and apparently the info I revieved was wrong. The bore is bigger on the SB. I ended up with a black and an FDE SB in addition to the 556 Mini and the 762 RC in the picture. View Quote View All Quotes View All Quotes Originally Posted By compuvette:
Originally Posted By Tmender03:
Originally Posted By compuvette:
I posted this in the silencer section this morning, but I figured you guys would find it interesting as well. I had a couple long calls with Surefire and Silencer Shop yesterday regarding the SOCOM 556 RC, the 556 SB, and the 556 MG. If you've looked at the specs, the SB and RC are the same external size and weigh the same. The MG is about an inch and a half longer and weighs much more. The MG has much thicker baffles and is designed for use on belt-fed MG's firing long bursts. The difference between the SB and RC is that they took the super thick blast baffle from the MG and stuck it in the SB. Everything else is the same as the RC. Warranty for barrel length is down to 10" on the RC and the SB is warrantied for barrels "shorter than 10". I asked if a 7.5" barrel was covered and Surefire said yes. They would also re-core due to baffle erosion. The SB does meter a little higher than the RC because the thicker blast baffle cuts down on volume in the can. Silencer Shop states as a shooter you can't here the difference, but the meter can. Anyway, I picked up a second SB this morning instead of an RC. Silencer Shop restocked on the RC, but the price is back up over $1100. The SB is still at the lower $963. For a thicker blast baffle and basically the same sound suppression and $200 less, it's a no-brainer..... ETA - figured I'd better post up some pics since it's the top of the page.... <a href="http://s483.photobucket.com/user/compuvette/media/40d833152c98b4c7262f92b785300856_zps98a465c0.jpg.html" target="_blank">http://i483.photobucket.com/albums/rr193/compuvette/40d833152c98b4c7262f92b785300856_zps98a465c0.jpg</a> <a href="http://s483.photobucket.com/user/compuvette/media/87a3bdcb6cee6305b242b9eca7075d3d_zpsd4233d67.jpg.html" target="_blank">http://i483.photobucket.com/albums/rr193/compuvette/87a3bdcb6cee6305b242b9eca7075d3d_zpsd4233d67.jpg</a> There's a 762-RC and a 556-Mini in that bottom picture. My first 556-SB is still waiting on form 3...... Yes, that's all my stuff waiting in "jail". More inbound. Hurry up ATF!!!! Is that Freedom, or another gun shop? Hillside in Roanoke. I've been in contact again with Surefire again and apparently the info I revieved was wrong. The bore is bigger on the SB. I ended up with a black and an FDE SB in addition to the 556 Mini and the 762 RC in the picture. I didn't know they were class 3, that's good to know. I live in Fort Wayne, so it's good to know there are more clones near by. |
|
|
Originally Posted By usmc_0311_0933:
Finally after years of lurking and jealousy, I can post in this forum, sorry for the crappy cellphone pic http://imagizer.imageshack.us/v2/800x600q90/538/5QdqwW.jpg View Quote Nicely done! |
|
I hope my guns killed someone before they moved in with me. Shit, I hope they go out at night and kill bad guys while I'm sleeping.-30calTBLkid
|
American by birth, Texan by the Grace of God.
|
Originally Posted By BCV:
https://scontent-a-lga.xx.fbcdn.net/hphotos-xfa1/v/l/t1.0-9/10881611_974689005221_1704044606768676255_n.jpg?oh=546800649b085b9d77ea37c76846e952&oe=553A3E33 she's a gassy bitch. View Quote Nothing a pri gas buster can't fix |
|
There are only two things i can't stand:
People who are intolerant of others' political beliefs and Liberals |
|
Originally Posted By usmc_0311_0933:
Finally after years of lurking and jealousy, I can post in this forum, sorry for the crappy cellphone pic http://imagizer.imageshack.us/v2/800x600q90/538/5QdqwW.jpg View Quote Nice setup. Somewhat similar to mine. |
|
|
Originally Posted By jrs93accord:
Nice setup. Somewhat similar to mine. <a href="http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/001_zps96bcb966.jpg.html" target="_blank">http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/001_zps96bcb966.jpg</a> View Quote View All Quotes View All Quotes Originally Posted By jrs93accord:
Originally Posted By usmc_0311_0933:
Finally after years of lurking and jealousy, I can post in this forum, sorry for the crappy cellphone pic http://imagizer.imageshack.us/v2/800x600q90/538/5QdqwW.jpg Nice setup. Somewhat similar to mine. <a href="http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/001_zps96bcb966.jpg.html" target="_blank">http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/001_zps96bcb966.jpg</a> mine has a surefire 6P mounted on the other side, im liking the Mk18 Mod 0 setup so far. CQBR (block II) is next on the build list, this clone stuff is addictive |
|
|
|
Originally Posted By jrs93accord:
Nice setup. Somewhat similar to mine. <a href="http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/001_zps96bcb966.jpg.html" target="_blank">http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/001_zps96bcb966.jpg</a> View Quote View All Quotes View All Quotes Originally Posted By jrs93accord:
Originally Posted By usmc_0311_0933:
Finally after years of lurking and jealousy, I can post in this forum, sorry for the crappy cellphone pic http://imagizer.imageshack.us/v2/800x600q90/538/5QdqwW.jpg Nice setup. Somewhat similar to mine. <a href="http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/001_zps96bcb966.jpg.html" target="_blank">http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/001_zps96bcb966.jpg</a> What mount is that for the optic and will it work with a PRO? |
|
|
Originally Posted By GTRider245:
What mount is that for the optic and will it work with a PRO? View Quote View All Quotes View All Quotes Originally Posted By GTRider245:
Originally Posted By jrs93accord:
Originally Posted By usmc_0311_0933:
Finally after years of lurking and jealousy, I can post in this forum, sorry for the crappy cellphone pic http://imagizer.imageshack.us/v2/800x600q90/538/5QdqwW.jpg Nice setup. Somewhat similar to mine. <a href="http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/001_zps96bcb966.jpg.html" target="_blank">http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/001_zps96bcb966.jpg</a> What mount is that for the optic and will it work with a PRO? Wilcox mount & it will work with the Aimpoint Pro. |
|
"Stay Alert, Stay Alive."- Me
"If we ever forget that we are One Nation Under God, then we will be a nation gone under." "Poor prior planning on your part does not constitute an emergency on mine." |
"Bro, you need to turn your ACOG off before the batteries die." - PMI Instructor: subject matter expert
|
There's been a lot of talk about the Govnah adjustable gas blocks. They are now in stock on their website; thought some of you guys might want to know. I just ordered the MK18 3 position model (I hope I got the right one). The website doesn't give the MK18 model specs. ATPIAL-C will be here Tuesday according to Fed-Ex, pics to follow.
|
|
|
Originally Posted By DocBach:
http://i800.photobucket.com/albums/yy285/docrock184/11091_10152869880418346_4011419384510425887_n_zps72324dbd.jpg Hopefully it gets a new RC556 in a couple weeks, mine went pending 9/12 and a lot of stamps around then are being approved. View Quote Nice man! Are you keeping the surefire flash hider, or going with the brake when it gets approved? |
|
|
took a bit to find the proper 4 prong, it's staying.
|
|
"Bro, you need to turn your ACOG off before the batteries die." - PMI Instructor: subject matter expert
|
|
Originally Posted By DocBach:
http://i800.photobucket.com/albums/yy285/docrock184/11091_10152869880418346_4011419384510425887_n_zps72324dbd.jpg Hopefully it gets a new RC556 in a couple weeks, mine went pending 9/12 and a lot of stamps around then are being approved. View Quote Looks similar to how mine did once. |
|
|
Originally Posted By sweatpants:
ECP is your spirit animal RTUtah? Gonna clean up my current build and start a PR/Block 1. I'm sending the barrel off to ADCO as soon as I can get these fucking BCM taper pins out of the FSB. SOCOM RC should be purchased by Feb or March. Not sure if I should also get an NT4 (I'm not really sure where to even buy one). T1 will stay there until I'm ready to park an Elcan on the Block 2. https://lh5.googleusercontent.com/-tH-9GWnZ0eg/VJPYR_6O3tI/AAAAAAAAFa4/sBpXHqVhkww/w1153-h865-no/IMG_2859.JPG ETA: Who's got the best price on an EXPS 3-0 Tan? View Quote Arms Unlimited has the best price I've been able to find. Add it to your cart and it should be $545 shipped. |
|
"Patriotism is supporting your country all the time, and your government when it deserves it." - Mark Twain
|
You said
All this time that you would die for me. Then why? Are you so suprised, when you hear your own Eulogy?" |
Originally Posted By Thunder79:
There's been a lot of talk about the Govnah adjustable gas blocks. They are now in stock on their website; thought some of you guys might want to know. I just ordered the MK18 3 position model (I hope I got the right one). The website doesn't give the MK18 model specs. ATPIAL-C will be here Tuesday according to Fed-Ex, pics to follow. View Quote I may be wrong, but it seems like I remember seeing somewhere on their site that with the RIS II rail only accepts the 2 position............I could be wrong though. Hope I am. Edit......should have looked before I misspoke. They show it with a 3 pos on the site with MK18 rail. It's hell getting old with CRS |
|
|
Originally Posted By Stoner25mkiv:
I may be wrong, but it seems like I remember seeing somewhere on their site that with the RIS II rail only accepts the 2 position............I could be wrong though. Hope I am. Edit......should have looked before I misspoke. They show it with a 3 pos on the site with MK18 rail. It's hell getting old with CRS View Quote View All Quotes View All Quotes Originally Posted By Stoner25mkiv:
Originally Posted By Thunder79:
There's been a lot of talk about the Govnah adjustable gas blocks. They are now in stock on their website; thought some of you guys might want to know. I just ordered the MK18 3 position model (I hope I got the right one). The website doesn't give the MK18 model specs. ATPIAL-C will be here Tuesday according to Fed-Ex, pics to follow. I may be wrong, but it seems like I remember seeing somewhere on their site that with the RIS II rail only accepts the 2 position............I could be wrong though. Hope I am. Edit......should have looked before I misspoke. They show it with a 3 pos on the site with MK18 rail. It's hell getting old with CRS I emailed them and here's a piece of the response: "The MK18 version is provided with a .070/.049/.082 and a .073/.052/.082 plate. Former for milspec ammo and the latter to handle commercial and lower powered ammo. Also note that the MK18 version is intended to be used with a rail system that can accomodate the 3 position version such as the MI SSK and the DD MK18 with possible clearance issues as pictured here: http://micromoa.com/?page_id=652#ddmk18" |
|
|
Originally Posted By sweatpants:
ECP is your spirit animal RTUtah? Gonna clean up my current build and start a PR/Block 1. I'm sending the barrel off to ADCO as soon as I can get these fucking BCM taper pins out of the FSB. SOCOM RC should be purchased by Feb or March. Not sure if I should also get an NT4 (I'm not really sure where to even buy one). T1 will stay there until I'm ready to park an Elcan on the Block 2. https://lh5.googleusercontent.com/-tH-9GWnZ0eg/VJPYR_6O3tI/AAAAAAAAFa4/sBpXHqVhkww/w1153-h865-no/IMG_2859.JPG ETA: Who's got the best price on an EXPS 3-0 Tan? View Quote Haha I see him in the Mk12. I'm trying to hold off on that clone for awhile. I will probably buy a couple more cans in January after our bonuses and I might tack on a MK12 can for just to have it in the pipe. Looking to see some PEQ-15C and RCs soon. TXDirtyMaxDiesel - Those are awesome. Where in Texas? I've got three days to kill in Texas. |
|
|
|
Originally Posted By ECPrevatte:
Haha I see him in the Mk12. I'm trying to hold off on that clone for awhile. I will probably buy a couple more cans in January after our bonuses and I might tack on a MK12 can for just to have it in the pipe. Looking to see some PEQ-15C and RCs soon. TXDirtyMaxDiesel - Those are awesome. Where in Texas? I've got three days to kill in Texas. View Quote View All Quotes View All Quotes Originally Posted By ECPrevatte:
Originally Posted By sweatpants:
ECP is your spirit animal RTUtah? Gonna clean up my current build and start a PR/Block 1. I'm sending the barrel off to ADCO as soon as I can get these fucking BCM taper pins out of the FSB. SOCOM RC should be purchased by Feb or March. Not sure if I should also get an NT4 (I'm not really sure where to even buy one). T1 will stay there until I'm ready to park an Elcan on the Block 2. https://lh5.googleusercontent.com/-tH-9GWnZ0eg/VJPYR_6O3tI/AAAAAAAAFa4/sBpXHqVhkww/w1153-h865-no/IMG_2859.JPG ETA: Who's got the best price on an EXPS 3-0 Tan? Haha I see him in the Mk12. I'm trying to hold off on that clone for awhile. I will probably buy a couple more cans in January after our bonuses and I might tack on a MK12 can for just to have it in the pipe. Looking to see some PEQ-15C and RCs soon. TXDirtyMaxDiesel - Those are awesome. Where in Texas? I've got three days to kill in Texas. North of Dallas. Rural town called Gunter. While the land isn't mine, we do have permission to use it to shoot, camp, and hunt predators and varmints. |
|
You said
All this time that you would die for me. Then why? Are you so suprised, when you hear your own Eulogy?" |
Looks like the new movie American Sniper is going to have some serious Mk18 mod 0 action.
R.I.P. Chris Kyle. https://m.youtube.com/watch?v=38u_E_epex Eta- and it looks like Clint's trigger discipline could use some work... |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.