User Panel
User Panel
User Panel
|
Posted: 8/23/2021 11:28:04 AM EDT
[#1]
Quote HistoryOriginally Posted By Doza1818: So I'm almost complete with my mini recce build, its primarily all LMT stuff so its taken quite a while to get to this point lol. I really wanted the shovelnose which now looks like it might realese some time in the near to far off in the distant future, idl but can't get my hands on one so I opted to go with the cqb upper instead and going with the 12' piston. I do have a question for the group and is it necessary to use a bipod with a mini recce? Im gripping the rail right in the middle leaving a about i would say 6 to 7 picatinny slots open. I think you'll find that the mini-recce is the un-clone. So use what works for you. If you want a pod, put one on. I have one on there in the pic, but I tend to just put it on when I need it, I don't leave it on there. It interferes with the AFG on there. So do what works for you and let the mission drive your gear. |
|
|
|
NY, USA
|
Posted: 8/23/2021 1:51:32 PM EDT
[#2]
Quote HistoryOriginally Posted By m24shooter: I think you'll find that the mini-recce is the un-clone. So use what works for you. If you want a pod, put one on. I have one on there in the pic, but I tend to just put it on when I need it, I don't leave it on there. It interferes with the AFG on there. So do what works for you and let the mission drive your gear. Gotcha, I'd assumed that the mini recce role required the use of a pod but I saw many builds here without one so I figured I'd ask to see a consensus of sorts. |
|
|
USA
|
Posted: 8/24/2021 12:25:44 PM EDT
[#3]
 Threw the S&B on there for a pic. I've received some PMs and y'all have me considering the NX8 F1 again. Not a fan of the reticle at 8x, but with the mil version I could just zero to the fine cross hair under the dot. Length and weight and day light brightness outweigh the cons. I don't shoot 3-gun and don't need max FOV at 1x like the Razor or Swaro/Kahles. Having realistic expectations of it's limitations, I think it's a good choice for the 13.7 build. |
|
|
|
Posted: 8/24/2021 2:24:51 PM EDT
[Last Edit: French1966]
[#4]
Quote HistoryOriginally Posted By Bringo: https://live.staticflickr.com/65535/51400526694_990509d1c0_z.jpg Threw the S&B on there for a pic. I've received some PMs and y'all have me considering the NX8 F1 again. Not a fan of the reticle at 8x, but with the mil version I could just zero to the fine cross hair under the dot. Length and weight and day light brightness outweigh the cons. I don't shoot 3-gun and don't need max FOV at 1x like the Razor or Swaro/Kahles. Having realistic expectations of it's limitations, I think it's a good choice for the 13.7 build. Awesome rifle It’s not difficult to shoot precisely with the NX8 center dot. You can also just use a ballistic calculator to figure out your holds using the mil hash marks, and is not necessary to zero using anything below the dot. Mil reticle is the way to go imo because the reticle is far less cluttered. Just my 2 cents Shot using NX8 on a 14.5  Attached File |
|
|
|
|
Posted: 8/24/2021 3:37:09 PM EDT
[#5]
|
|
|
|
USA
|
Posted: 8/24/2021 4:00:51 PM EDT
[#6]
Quote HistoryOriginally Posted By French1966: Awesome rifle It’s not difficult to shoot precisely with the NX8 center dot. You can also just use a ballistic calculator to figure out your holds using the mil hash marks, and is not necessary to zero using anything below the dot. Mil reticle is the way to go imo because the reticle is far less cluttered. Just my 2 cents Shot using NX8 on a 14.5 https://www.ar15.com/media/mediaFiles/496867/7E481BB7-44A5-4029-BA82-CA893EEA9CDE_jpe-2064498.JPG Quote HistoryOriginally Posted By French1966: Originally Posted By Bringo: https://live.staticflickr.com/65535/51400526694_990509d1c0_z.jpg Threw the S&B on there for a pic. I've received some PMs and y'all have me considering the NX8 F1 again. Not a fan of the reticle at 8x, but with the mil version I could just zero to the fine cross hair under the dot. Length and weight and day light brightness outweigh the cons. I don't shoot 3-gun and don't need max FOV at 1x like the Razor or Swaro/Kahles. Having realistic expectations of it's limitations, I think it's a good choice for the 13.7 build. Awesome rifle It’s not difficult to shoot precisely with the NX8 center dot. You can also just use a ballistic calculator to figure out your holds using the mil hash marks, and is not necessary to zero using anything below the dot. Mil reticle is the way to go imo because the reticle is far less cluttered. Just my 2 cents Shot using NX8 on a 14.5 https://www.ar15.com/media/mediaFiles/496867/7E481BB7-44A5-4029-BA82-CA893EEA9CDE_jpe-2064498.JPG That's some good shootin Tex! Thanks for the input. I'm going to try to sell some things and pick up a NX8. |
|
|
RI, USA
|
Posted: 8/24/2021 5:10:55 PM EDT
[#7]
Is anyone using a Geissele MK16 10.5" on a 12.5" barrel?
I just bought a 12" rail and it turns out the actual length is closer to 13". With the barrel in the upper i measured that a rail with exactly a 10.5" top length would be perfect |
|
|
TX, USA
|
Posted: 8/24/2021 5:52:29 PM EDT
[#8]
Quote HistoryOriginally Posted By Lonestar12: https://www.ar15.com/media/mediaFiles/298831/072009F0-9624-451B-8404-55C4477B4135_jpe-2064573.JPG NICE details? |
|
|
NC, USA
|
Posted: 8/24/2021 8:06:30 PM EDT
[Last Edit: Eyekahn]
[#9]
Quote HistoryOriginally Posted By Bringo: https://live.staticflickr.com/65535/51400526694_990509d1c0_z.jpg Threw the S&B on there for a pic. I've received some PMs and y'all have me considering the NX8 F1 again. Not a fan of the reticle at 8x, but with the mil version I could just zero to the fine cross hair under the dot. Length and weight and day light brightness outweigh the cons. I don't shoot 3-gun and don't need max FOV at 1x like the Razor or Swaro/Kahles. Having realistic expectations of it's limitations, I think it's a good choice for the 13.7 build. That's exactly what I do. Hold on 2 Mil hash. Get a precise zero then dial 2 Mil and confirm at distance. NX8 is the perfect optic for a precise SBR. |
|
|
NC, USA
|
Posted: 8/24/2021 8:07:46 PM EDT
[#10]
Quote HistoryOriginally Posted By French1966: Awesome rifle It’s not difficult to shoot precisely with the NX8 center dot. You can also just use a ballistic calculator to figure out your holds using the mil hash marks, and is not necessary to zero using anything below the dot. Mil reticle is the way to go imo because the reticle is far less cluttered. Just my 2 cents Shot using NX8 on a 14.5 https://www.ar15.com/media/mediaFiles/496867/7E481BB7-44A5-4029-BA82-CA893EEA9CDE_jpe-2064498.JPG Gotta shoot 5 to make it count! 
|
|
|
|
Posted: 8/24/2021 8:42:35 PM EDT
[#11]
Quote HistoryOriginally Posted By Eyekahn: Gotta shoot 5 to make it count! Quote HistoryOriginally Posted By Eyekahn: Originally Posted By French1966: Awesome rifle It’s not difficult to shoot precisely with the NX8 center dot. You can also just use a ballistic calculator to figure out your holds using the mil hash marks, and is not necessary to zero using anything below the dot. Mil reticle is the way to go imo because the reticle is far less cluttered. Just my 2 cents Shot using NX8 on a 14.5 https://www.ar15.com/media/mediaFiles/496867/7E481BB7-44A5-4029-BA82-CA893EEA9CDE_jpe-2064498.JPG Gotta shoot 5 to make it count! Does 4 count???  Attached File |
|
|
|
NC, USA
|
Posted: 8/24/2021 9:12:50 PM EDT
[#12]
Quote HistoryOriginally Posted By hoody2shoez: Does 4 count??? https://www.ar15.com/media/mediaFiles/470854/Screenshot_20210531-135039_Range_Buddy_j-2064990.JPG So close! |
|
|
|
Posted: 8/24/2021 9:19:34 PM EDT
[#13]
|
|
|
|
USA
|
Posted: 8/25/2021 1:17:06 PM EDT
[#14]
Not my pics. From a certain company's email that just went out today:
  Seeing lots of pics of 14.5" recces over the mk12 these days. |
|
|
|
Posted: 8/25/2021 2:29:34 PM EDT
[Last Edit: French1966]
[#15]
Quote HistoryOriginally Posted By Eyekahn: Gotta shoot 5 to make it count! Quote HistoryOriginally Posted By Eyekahn: Originally Posted By French1966: Awesome rifle It’s not difficult to shoot precisely with the NX8 center dot. You can also just use a ballistic calculator to figure out your holds using the mil hash marks, and is not necessary to zero using anything below the dot. Mil reticle is the way to go imo because the reticle is far less cluttered. Just my 2 cents Shot using NX8 on a 14.5 https://www.ar15.com/media/mediaFiles/496867/7E481BB7-44A5-4029-BA82-CA893EEA9CDE_jpe-2064498.JPG Gotta shoot 5 to make it count! Agreed. And some would say 10 Unfortunately that’s just the string I cherry picked while I was zeroing that day  No way M193 would have held that moa for 5-10 shots (at least with me on the trigger) |
|
|
|
TX, USA
|
Posted: 8/25/2021 4:59:51 PM EDT
[#16]
Pretty new to this mini recce topic. Is .300 blackout good for a mini recce in a 10.5 bbl? Seems like most 300 blackout rifles are set up with red dots. Can't find a whole lot of info on .300 blackout as a mini recce role or its capabilities outside of 100-200 yards. Wondering if putting serious glass on something within 200 yards is worth it.
|
|
|
|
Posted: 8/25/2021 5:31:29 PM EDT
[#17]
Quote HistoryOriginally Posted By Omega9000: Pretty new to this mini recce topic. Is .300 blackout good for a mini recce in a 10.5 bbl? Seems like most 300 blackout rifles are set up with red dots. Can't find a whole lot of info on .300 blackout as a mini recce role or its capabilities outside of 100-200 yards. Wondering if putting serious glass on something within 200 yards is worth it. Worth it is a personal opinion. My of us like the flatter trajectory of 5.56 over 300blk for the longer ranges of the recce stuff. Ymmv. |
|
|
|
NC, USA
|
Posted: 8/25/2021 9:52:39 PM EDT
[Last Edit: Eyekahn]
[#18]
Quote HistoryOriginally Posted By Omega9000: Pretty new to this mini recce topic. Is .300 blackout good for a mini recce in a 10.5 bbl? Seems like most 300 blackout rifles are set up with red dots. Can't find a whole lot of info on .300 blackout as a mini recce role or its capabilities outside of 100-200 yards. Wondering if putting serious glass on something within 200 yards is worth it. 300BLK is a monster out to 500yd. I've taken it further but realistic accuracy on small plates is 500yd. It has a lot of energy at that distance. I regularly shot subsonic out to 300yd. 300BLK is the perfect MR caliber. Buy a Wilson 11.3 300BLk barrel. It's insanely accurate. If your shooting 200 and in get a Steiner P4Xi. Great optic and perfect for 0-300yd. |
|
|
TX, USA
|
Posted: 8/25/2021 11:14:00 PM EDT
[#19]
Quote HistoryOriginally Posted By Eyekahn: 300BLK is a monster out to 500yd. I've taken it further but realistic accuracy on small plates is 500yd. It has a lot of energy at that distance. I regularly shot subsonic out to 300yd. 300BLK is the perfect MR caliber. Buy a Wilson 11.3 300BLk barrel. It's insanely accurate. If your shooting 200 and in get a Steiner P4Xi. Great optic and perfect for 0-300yd. Good to hear. I was reading earlier about holds and how 300 blk is not as flat as 556. I have a Noveske 10.5 upper in 300blk and trying to decide what optic to throw on it. Never messed around with LPVO's and wanted to turn it into a mini recce with a 1-6 or 1-8 but wasn't sure how far the 300 blk could stretch out to since everyone seems to consider it solely a close quarters gun. |
|
|
|
Posted: 8/26/2021 1:07:59 AM EDT
[#20]
Quote HistoryOriginally Posted By adh: NICE details? Quote HistoryOriginally Posted By adh: Originally Posted By Lonestar12: https://www.ar15.com/media/mediaFiles/298831/072009F0-9624-451B-8404-55C4477B4135_jpe-2064573.JPG NICE details? Thanks, I like it but the trij is heavy. A NF 2.5-10x32 with RMR would be ideal, won’t hold my breath... Details tip to butt: YHM resonator BA 12.5” 6.5G PRI rifle length HSP M600 body & mount w/ Malkoff E2HT Streamlight TLR VIR Trijicon 1-8x in a Larue 1.93” WAR adjustable gas upper Geissele - LPK, S3G, super 42 buffer and tube LWRC stock Still needs top mount RMR but might switch optic and mount. RE: 300blk mini recce. I think your use and shooting style dictate caliber. 10.5” 300blk supers will get out there. Just learn your holds. I chose 6.5G since it does well out of a shorter barrel, ammo used to be cheap and it has enough energy for anything within the county (2 or 4 leg). Distance is fun with the minis but I think it shines for PID. Verifying the neighbors dog from a coyote or a cell phone from a weapon could be helpful. Random pics. Hog shot at ~250m  Attached FileTesting the Malkoff head, 200m plate  Attached File |
|
|
|
USA
|
Posted: 8/26/2021 9:17:19 AM EDT
[#21]
@Lonestar12 Since we're on the subject of mini mod H's... Went and picked up the AEM4 last night. It was black for about 10 minutes.
Heavily influenced by @Eyekahn 's old mini H. This one is finally (almost) done. Need to settle on a sling and a 2 stage trigger.   Never had a mk12 or NSW recce, but between this one and the mini NSW, I feel like the itch is scratched. |
|
|
|
Posted: 8/26/2021 9:19:42 AM EDT
[#22]
Quote HistoryOriginally Posted By Bringo: @Lonestar12 Since we're on the subject of mini mod H's... Went and picked up the AEM4 last night. It was black for about 10 minutes. Heavily influenced by @Eyekahn 's old mini H. This one is finally (almost) done. Need to settle on a sling and a 2 stage trigger. https://live.staticflickr.com/65535/51404438864_795262d356_z.jpg https://live.staticflickr.com/65535/51402937422_685987b3b2_z.jpg Never had a mk12 or NSW recce, but between this one and the mini NSW, I feel like the itch is scratched. That shit is hot! |
|
|
|
USA
|
Posted: 8/26/2021 9:26:38 AM EDT
[Last Edit: Bringo]
[#23]
Quote HistoryOriginally Posted By Omega9000: Good to hear. I was reading earlier about holds and how 300 blk is not as flat as 556. I have a Noveske 10.5 upper in 300blk and trying to decide what optic to throw on it. Never messed around with LPVO's and wanted to turn it into a mini recce with a 1-6 or 1-8 but wasn't sure how far the 300 blk could stretch out to since everyone seems to consider it solely a close quarters gun. Quote HistoryOriginally Posted By Omega9000: Originally Posted By Eyekahn: 300BLK is a monster out to 500yd. I've taken it further but realistic accuracy on small plates is 500yd. It has a lot of energy at that distance. I regularly shot subsonic out to 300yd. 300BLK is the perfect MR caliber. Buy a Wilson 11.3 300BLk barrel. It's insanely accurate. If your shooting 200 and in get a Steiner P4Xi. Great optic and perfect for 0-300yd. Good to hear. I was reading earlier about holds and how 300 blk is not as flat as 556. I have a Noveske 10.5 upper in 300blk and trying to decide what optic to throw on it. Never messed around with LPVO's and wanted to turn it into a mini recce with a 1-6 or 1-8 but wasn't sure how far the 300 blk could stretch out to since everyone seems to consider it solely a close quarters gun.  10.2" 300 blackout Noveske Johnny clone with the Schmidt and Bender Short Dot 1.1 - 4 is perfect for NC whitetail hunting. Getting within 100 yards is easy. Honestly, I don't plan to shoot beyond 50 yards hunting around here. It's stupid accurate with Barnes 110 grain bullets. John knew what he was doing; this rifle is a cheat code. ETA: Thanks! @Outrider @Omega9000 As suggested, the Steiner 1-4 would fill the role just as well if not better than the S&B. The old S&B is great glass, but size and weight take a hit and it's not a true 1 power. The previous gen Steiner px4 has an absolutely perfect reticle, to my eye anyway. |
|
|
FL, USA
|
Posted: 8/26/2021 10:21:30 AM EDT
[#24]
Quote HistoryOriginally Posted By Bringo: @Lonestar12 Since we're on the subject of mini mod H's... Went and picked up the AEM4 last night. It was black for about 10 minutes. So obvious question, where did you find an AEM4? |
|
|
TX, USA
|
Posted: 8/26/2021 10:30:54 AM EDT
[#25]
Quote HistoryOriginally Posted By Lonestar12: Thanks, I like it but the trij is heavy. A NF 2.5-10x32 with RMR would be ideal, won’t hold my breath... Details tip to butt: YHM resonator BA 12.5” 6.5G PRI rifle length HSP M600 body & mount w/ Malkoff E2HT Streamlight TLR VIR Trijicon 1-8x in a Larue 1.93” WAR adjustable gas upper Geissele - LPK, S3G, super 42 buffer and tube LWRC stock Still needs top mount RMR but might switch optic and mount. RE: 300blk mini recce. I think your use and shooting style dictate caliber. 10.5” 300blk supers will get out there. Just learn your holds. I chose 6.5G since it does well out of a shorter barrel, ammo used to be cheap and it has enough energy for anything within the county (2 or 4 leg). Distance is fun with the minis but I think it shines for PID. Verifying the neighbors dog from a coyote or a cell phone from a weapon could be helpful. Random pics. Hog shot at ~250m https://www.ar15.com/media/mediaFiles/298831/D7C9D418-F07E-4C05-B396-AAD4EA2CAD1B_jpe-2066383.JPG Testing the Malkoff head, 200m plate https://www.ar15.com/media/mediaFiles/298831/0BCD3B9B-A53C-4E52-BC47-0D5C8B3FC20D_jpe-2066384.JPG Thanks for the info.....funny thing with ferral hogs too....best round I've ever used to dump them is 55grn XM/M193 I've shot them square in the shoulder with a 150 grn SP .308 and had them run 100 yrds or more (all this at less mostly less than 100 yrds where I hunt) |
|
|
USA
|
Posted: 8/26/2021 11:05:07 AM EDT
[#26]
Quote HistoryOriginally Posted By MK3110: So obvious question, where did you find an AEM4? Quote HistoryOriginally Posted By MK3110: Originally Posted By Bringo: @Lonestar12 Since we're on the subject of mini mod H's... Went and picked up the AEM4 last night. It was black for about 10 minutes. So obvious question, where did you find an AEM4? @MK3110 2019  ... 
|
|
|
TX, USA
|
Posted: 8/26/2021 11:05:16 AM EDT
[#27]
Quote HistoryOriginally Posted By Bringo: https://live.staticflickr.com/65535/51072797913_c90c46c645_z.jpg 10.2" 300 blackout Noveske Johnny clone with the Schmidt and Bender Short Dot 1.1 - 4 is perfect for NC whitetail hunting. Getting within 100 yards is easy. Honestly, I don't plan to shoot beyond 50 yards hunting around here. It's stupid accurate with Barnes 110 grain bullets. John knew what he was doing; this rifle is a cheat code. ETA: Thanks! @Outrider @Omega9000 As suggested, the Steiner 1-4 would fill the role just as well if not better than the S&B. The old S&B is great glass, but size and weight take a hit and it's not a true 1 power. The previous gen Steiner px4 has an absolutely perfect reticle, to my eye anyway. Yeah I'm kind of influenced by John's rifle, except I went with 10.5. Looking at 1-8x since it's out there, don't want to limit myself to 4x. I'm thinking with 300 blk i'm good out to roughly 200 PBR and has enough energy behind it to slay most north american animals I might run into out in the woods. I'll keep the 10.5 556 with the RDS, the 10.5 blk as a mini recce, and guess i'll start building a 16'' 308 bolt gun for anything past 200 yrds. Boy this gets expensive quick lol |
|
|
NC, USA
|
Posted: 8/26/2021 11:35:11 AM EDT
[#28]
Quote HistoryOriginally Posted By Omega9000: Yeah I'm kind of influenced by John's rifle, except I went with 10.5. Looking at 1-8x since it's out there, don't want to limit myself to 4x. I'm thinking with 300 blk i'm good out to roughly 200 PBR and has enough energy behind it to slay most north american animals I might run into out in the woods. I'll keep the 10.5 556 with the RDS, the 10.5 blk as a mini recce, and guess i'll start building a 16'' 308 bolt gun for anything past 200 yrds. Boy this gets expensive quick lol Build that 16" in 6.5CM. My 16" 6.5CM is my favorite rifle by far. |
|
|
FL, USA
|
Posted: 8/26/2021 12:13:21 PM EDT
[#29]
Quote HistoryOriginally Posted By Bringo: @MK3110 2019 ... When, not where, would have been the better question for sure but really hope it didn’t take two years for your stamp to clear. Nice stick. |
|
|
USA
|
Posted: 8/26/2021 1:30:09 PM EDT
[#30]
Quote HistoryOriginally Posted By MK3110: When, not where, would have been the better question for sure but really hope it didn’t take two years for your stamp to clear. Nice stick. Quote HistoryOriginally Posted By MK3110: Originally Posted By Bringo: @MK3110 2019 ... When, not where, would have been the better question for sure but really hope it didn’t take two years for your stamp to clear. Nice stick. I should have been more detailed in my response. I think it was Nov 2019 from ADCO. My usual FFL's license was up for renewal so ADCO held it for about 3 months until he received his renewal. It took my FFL a while to get the application to me and it took me a while to finally mail it off to the ATF. Another 8 months went by and I had to correct the address on my finger print cards because we moved...6 weeks later it's here. |
|
|
OH, USA
|
Posted: 8/26/2021 4:09:58 PM EDT
[#31]
Quote HistoryOriginally Posted By Lonestar12: https://www.ar15.com/media/mediaFiles/298831/072009F0-9624-451B-8404-55C4477B4135_jpe-2064573.JPG what rubber band for the rattle?
|
|
|
MD, USA
|
Posted: 8/27/2021 11:36:03 PM EDT
[Last Edit: Xram]
[#32]
Quote HistoryOriginally Posted By Omega9000: Yeah I'm kind of influenced by John's rifle, except I went with 10.5. Looking at 1-8x since it's out there, don't want to limit myself to 4x. I'm thinking with 300 blk i'm good out to roughly 200 PBR and has enough energy behind it to slay most north american animals I might run into out in the woods. I'll keep the 10.5 556 with the RDS, the 10.5 blk as a mini recce, and guess i'll start building a 16'' 308 bolt gun for anything past 200 yrds. Boy this gets expensive quick lol This is similar to where I ended up. I run my govt-profile 11.5 5.56 upper with a red dot and my 10.5 300blk match upper with a Delta Stryker 1-6 on top. I think LPVOs are great for 300blk because you can zero for supers and then quickly dial or hold for subs. It makes a quiet, accurate, and versatile 0-300-yard rifle. And agree with above, 6.5CM all the way for the bolt gun. |
|
|
MD, USA
|
Posted: 8/28/2021 12:06:16 AM EDT
[Last Edit: Xram]
[#33]
Quote HistoryOriginally Posted By Bringo: @Lonestar12 Since we're on the subject of mini mod H's... Went and picked up the AEM4 last night. It was black for about 10 minutes. Heavily influenced by @Eyekahn 's old mini H. This one is finally (almost) done. Need to settle on a sling and a 2 stage trigger. https://live.staticflickr.com/65535/51404438864_795262d356_z.jpg https://live.staticflickr.com/65535/51402937422_685987b3b2_z.jpg Never had a mk12 or NSW recce, but between this one and the mini NSW, I feel like the itch is scratched. Really nice. What 2-stages are you considering? I currently have MBT-2s in my recce and mini-recce setups and an SSA-E in my SPR-ish build. The SSA-e is a little nicer for real precision work (like if you're aiming for consistent sub-half MOA at distance, it might help) but the MBT-2 is at least 85% there for less than half the cost. Perfect for a recce IMO. A G2S might fit the bill too. |
|
|
MO, USA
|
Posted: 8/28/2021 1:10:27 AM EDT
[#34]
Quote HistoryOriginally Posted By Bringo: @Lonestar12 Since we're on the subject of mini mod H's... Went and picked up the AEM4 last night. It was black for about 10 minutes. Heavily influenced by @Eyekahn 's old mini H. This one is finally (almost) done. Need to settle on a sling and a 2 stage trigger. https://live.staticflickr.com/65535/51404438864_795262d356_z.jpg https://live.staticflickr.com/65535/51402937422_685987b3b2_z.jpg Never had a mk12 or NSW recce, but between this one and the mini NSW, I feel like the itch is scratched. Driippp. Nice stick! |
|
|
NC, USA
|
Posted: 8/28/2021 6:11:31 AM EDT
[#35]
Quote HistoryOriginally Posted By Bringo: @Lonestar12 Since we're on the subject of mini mod H's... Went and picked up the AEM4 last night. It was black for about 10 minutes. Heavily influenced by @Eyekahn 's old mini H. This one is finally (almost) done. Need to settle on a sling and a 2 stage trigger. https://live.staticflickr.com/65535/51404438864_795262d356_z.jpg https://live.staticflickr.com/65535/51402937422_685987b3b2_z.jpg Never had a mk12 or NSW recce, but between this one and the mini NSW, I feel like the itch is scratched. This is awesome! What's the barrel length? I'm Green on aem4's. |
|
|
VA, USA
|
Posted: 8/28/2021 11:21:34 AM EDT
[#36]
For those of you running "Mini-NSW Recce's", are you running carbine or mid length gas? I have a Criterion 14.5 mid coming soon (hopefully) that Im thinking of chopping down for a FF Ras mid
|
|
|
|
Posted: 8/28/2021 1:24:54 PM EDT
[#37]
Quote HistoryOriginally Posted By GeeeArrr: For those of you running "Mini-NSW Recce's", are you running carbine or mid length gas? I have a Criterion 14.5 mid coming soon (hopefully) that Im thinking of chopping down for a FF Ras mid Gas port sizing is going to matter more than if it's carbine or mid length. I have a mid tube paired with a 13in. barrel / Rifle Length Ras. You'll have some gas block poking out with a mid gassed barrel and Mid Ras set up. (Assuming your going for flush fit.) 
|
|
|
|
GA, USA
|
Posted: 8/28/2021 2:36:57 PM EDT
[#38]
Quote HistoryOriginally Posted By GeeeArrr: For those of you running "Mini-NSW Recce's", are you running carbine or mid length gas? I have a Criterion 14.5 mid coming soon (hopefully) that Im thinking of chopping down for a FF Ras mid Yep as the poster above said if you want the NSW look you have to go carbine for flush fit mini. |
|
|
|
Posted: 8/28/2021 3:09:59 PM EDT
[#39]
Quote HistoryOriginally Posted By GeeeArrr: For those of you running "Mini-NSW Recce's", are you running carbine or mid length gas? I have a Criterion 14.5 mid coming soon (hopefully) that Im thinking of chopping down for a FF Ras mid Mid length w/ spikes tapered gas block and medium ff Ras. Had to shave the rail a skosh to get the AEM5 to fit but she’s flush. Just crossed the 200 day mark on an AEM3 for this rig. Have to send the barrel in to D. Wilson to to get chopped.  Attached File Attached File Attached File Attached File |
|
|
|
TX, USA
|
Posted: 8/28/2021 4:53:00 PM EDT
[#40]
Quote HistoryOriginally Posted By Lonestar12: Thanks, I like it but the trij is heavy. A NF 2.5-10x32 with RMR would be ideal, won’t hold my breath... Details tip to butt: YHM resonator BA 12.5” 6.5G PRI rifle length HSP M600 body & mount w/ Malkoff E2HT Streamlight TLR VIR Trijicon 1-8x in a Larue 1.93” WAR adjustable gas upper Geissele - LPK, S3G, super 42 buffer and tube LWRC stock Still needs top mount RMR but might switch optic and mount. RE: 300blk mini recce. I think your use and shooting style dictate caliber. 10.5” 300blk supers will get out there. Just learn your holds. I chose 6.5G since it does well out of a shorter barrel, ammo used to be cheap and it has enough energy for anything within the county (2 or 4 leg). Distance is fun with the minis but I think it shines for PID. Verifying the neighbors dog from a coyote or a cell phone from a weapon could be helpful. Random pics. Hog shot at ~250m https://www.ar15.com/media/mediaFiles/298831/D7C9D418-F07E-4C05-B396-AAD4EA2CAD1B_jpe-2066383.JPG Testing the Malkoff head, 200m plate https://www.ar15.com/media/mediaFiles/298831/0BCD3B9B-A53C-4E52-BC47-0D5C8B3FC20D_jpe-2066384.JPG If you’re thinking about getting rid of the 1-8 I might be interested. Is it the Accupower or Credo and is it MOA or MIL? |
|
|
TN, USA
|
Posted: 8/29/2021 3:05:48 PM EDT
[#41]
what offset reddot mount would you guys use?
the Badger J-Arm or the arisaka mount? i currently have the arisaka, but i am gettin a badger C1 and think i should get the J-arm for it |
|
|
|
Posted: 8/29/2021 7:42:18 PM EDT
[#42]
Quote HistoryOriginally Posted By sid_79: what offset reddot mount would you guys use? the Badger J-Arm or the arisaka mount? i currently have the arisaka, but i am gettin a badger C1 and think i should get the J-arm for it I’m a huge fan of the j-arm. Actually just sold an arisaka and plan on replacing it with another condition one j-arm. |
|
|
|
|
Posted: 8/30/2021 1:57:51 AM EDT
[#43]
Quote HistoryOriginally Posted By TBone556: If you’re thinking about getting rid of the 1-8 I might be interested. Is it the Accupower or Credo and is it MOA or MIL? @TBone556 It’s accupower 1-8 MIL. Got it on the EE in 2018ish, no box or anything. Never planned to sell so some surface wear, plus the reticle has small imperfection (at 12 o’clock) that only shows with illum reticle. Figured it wasn’t worth selling.  Attached File |
|
|
|
|
Posted: 8/30/2021 9:15:14 PM EDT
[#44]
Updated the 12.5 to the new fortis 11.8 rail. Xeno flash hider replaced the cmt linear comp. This is before I put all the accessories back on
 Attached File |
|
|
|
|
Posted: 8/30/2021 9:48:38 PM EDT
[#45]
Quote HistoryOriginally Posted By Lonestar12: @TBone556 It’s accupower 1-8 MIL. Got it on the EE in 2018ish, no box or anything. Never planned to sell so some surface wear, plus the reticle has small imperfection (at 12 o’clock) that only shows with illum reticle. Figured it wasn’t worth selling. https://www.ar15.com/media/mediaFiles/298831/F57F2D07-E9AE-467B-A475-746C88DB5F71_jpe-2071616.JPG Have you contacted Trij about possible warranty work? I sent one of mine in because the trit was very dim. They recharged it, cleaned the internals, and fixed an issue with the reticle that I hadn't even noticed all for free. It was basically like getting a new scope again. |
|
|
|
|
Posted: 8/31/2021 12:52:05 PM EDT
[#46]
Quote HistoryOriginally Posted By m24shooter: Have you contacted Trij about possible warranty work? I sent one of mine in because the trit was very dim. They recharged it, cleaned the internals, and fixed an issue with the reticle that I hadn't even noticed all for free. It was basically like getting a new scope again. I have not, never bothered me enough to take off and send. Maybe I should... thanks |
|
|
|
USA
|
Posted: 8/31/2021 2:08:14 PM EDT
[#47]
Quote HistoryOriginally Posted By Xram: Really nice. What 2-stages are you considering? I currently have MBT-2s in my recce and mini-recce setups and an SSA-E in my SPR-ish build. The SSA-e is a little nicer for real precision work (like if you're aiming for consistent sub-half MOA at distance, it might help) but the MBT-2 is at least 85% there for less than half the cost. Perfect for a recce IMO. A G2S might fit the bill too. Quote HistoryOriginally Posted By Xram: Originally Posted By Bringo: @Lonestar12 Since we're on the subject of mini mod H's... Went and picked up the AEM4 last night. It was black for about 10 minutes. Heavily influenced by @Eyekahn 's old mini H. This one is finally (almost) done. Need to settle on a sling and a 2 stage trigger. https://live.staticflickr.com/65535/51404438864_795262d356_z.jpg https://live.staticflickr.com/65535/51402937422_685987b3b2_z.jpg Never had a mk12 or NSW recce, but between this one and the mini NSW, I feel like the itch is scratched. Really nice. What 2-stages are you considering? I currently have MBT-2s in my recce and mini-recce setups and an SSA-E in my SPR-ish build. The SSA-e is a little nicer for real precision work (like if you're aiming for consistent sub-half MOA at distance, it might help) but the MBT-2 is at least 85% there for less than half the cost. Perfect for a recce IMO. A G2S might fit the bill too. I have a couple MBT-2S. One in the AR-10 and one in the spare parts bin. I plan to sell the one in spare parts bin. Feels right in an AR-10, but it feels too, beefy I guess, to me, in an AR-15...something about the reset. I want another 2-stage Geissele for the mini H. Whatever I can find on sale. |
|
|
USA
|
Posted: 8/31/2021 2:08:47 PM EDT
[#48]
Quote HistoryOriginally Posted By Eyekahn: This is awesome! What's the barrel length? I'm Green on aem4's. Quote HistoryOriginally Posted By Eyekahn: Originally Posted By Bringo: @Lonestar12 Since we're on the subject of mini mod H's... Went and picked up the AEM4 last night. It was black for about 10 minutes. Heavily influenced by @Eyekahn 's old mini H. This one is finally (almost) done. Need to settle on a sling and a 2 stage trigger. https://live.staticflickr.com/65535/51404438864_795262d356_z.jpg https://live.staticflickr.com/65535/51402937422_685987b3b2_z.jpg Never had a mk12 or NSW recce, but between this one and the mini NSW, I feel like the itch is scratched. This is awesome! What's the barrel length? I'm Green on aem4's. Thanks man. It's a 12.5". |
|
|
TX, USA
|
Posted: 8/31/2021 2:54:53 PM EDT
[#49]
Quote HistoryOriginally Posted By Lonestar12: @TBone556 It’s accupower 1-8 MIL. Got it on the EE in 2018ish, no box or anything. Never planned to sell so some surface wear, plus the reticle has small imperfection (at 12 o’clock) that only shows with illum reticle. Figured it wasn’t worth selling. https://www.ar15.com/media/mediaFiles/298831/F57F2D07-E9AE-467B-A475-746C88DB5F71_jpe-2071616.JPG It’s a good optic, I have the 1-8 VCOG and it has the new credo style reticle and I will say it’s an improvement over the older accupower. I rarely use the illumination when I crank up the magnification. |
|
|
|
Posted: 9/3/2021 5:35:52 PM EDT
[#50]
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
