User Panel
User Panel
User Panel
|
Posted: 1/2/2021 5:33:26 PM EDT
[#1]
 
|
|
|
|
Posted: 1/2/2021 5:44:41 PM EDT
[#2]
A 10/22 wallet drainer is on my list to build. Best I've done so far are a takedown in a magpul stock and Volquartsen trigger, extractor, and bolt release upgrades. Put a regular one in a magpul stock and made LOP as short as possible for my 9yo. He was putting everything in the black on a 25yd pistol target at 50yds first time out with it.
|
|
|
|
Posted: 1/2/2021 5:45:29 PM EDT
[#3]
I like your style  Attached FileQuoted: Gott Damm! Sexy As Fuck. Where can one acquire that stock? The parts list in the 40+ year old manual for mine says it's on an exchange basis only. So you have to buy an RSI 1022 to get one. I think they have done some distributor specials a few times in the past so not impossible to find one. |
|
|
|
Posted: 1/2/2021 5:47:41 PM EDT
[#4]
Mine is in a Boyd's stock, tuned Volquartson trigger group, with a Green Mountain 18" heavy barrel with cantilever scope mount. Don't know why more people don't go with the cantilever scope mount with how the barrel is attached.
|
|
|
|
Posted: 1/2/2021 5:52:18 PM EDT
[#5]
|
|
|
|
Posted: 1/2/2021 5:53:20 PM EDT
[#6]
www.rimfirecentral.com
|
|
|
|
Posted: 1/2/2021 5:55:46 PM EDT
[#7]
Mine is pretty simple,houge overmold stock and volquartsen trigger parts,I've thought about going full ham on it with aftermarket parts but. I think it's already more accurate than I am a shot.
|
|
|
|
Posted: 1/2/2021 5:58:10 PM EDT
[#8]
|
|
|
|
Posted: 1/2/2021 5:58:54 PM EDT
[#9]
|
|
|
|
Posted: 1/2/2021 6:00:21 PM EDT
[#10]
Quote HistoryQuoted: What's wrong with the 10/22 as it comes? https://www.AR15.Com/media/mediaFiles/495488/20200405_122414_jpg-1760719.JPG But, but..  
|
|
|
|
Posted: 1/2/2021 6:02:32 PM EDT
[#11]
I modeled my 10-22 money pit on the Israeli army's integrally silenced versions. Looks similar to mine except mine has a synthetic stock:
|
|
|
|
Posted: 1/2/2021 6:06:19 PM EDT
[#12]
Quote HistoryQuoted: I modeled my 10-22 money pit on the Israeli army's integrally silenced versions. Looks similar to mine except mine has a synthetic stock: https://www.thefirearmblog.com/blog/wp-content/uploads/2015/10/israel-ruger-1022.jpg  Attached File |
|
|
|
Posted: 1/2/2021 6:16:09 PM EDT
[#13]
Quote HistoryQuoted: Which stock worked best? It’s hard to say. The Magpul stock is a relatively new acquisition and I like it very much. I can’t tell yet whether it makes shooting easier than the more conventional Ruger factory laminated stock or the very similar fiberglass version but it sure does look cool! I also have Boyd’s Pro Varmint (formerly the ridiculously named “Tacticool” stock) that has been sitting in the shipping box for the last five years. I have a spare 10/22 and a very nice Green Mountain 18” stainless bull barrel waiting if I ever get the time to plug them together. Next up I’m going to try one of the Victor Titan stocks. It looks like a very nice piece. ETA: I forgot to mention the Hogue rubber over molded stock. I think it’s great with a standard barrel but I haven’t tried the bull barrel version. I worry that it may not be sufficiently rigid to support the much heavier barrel. It seems to be quite popular in that configuration however so my concern is probably misguided. |
|
|
|
Posted: 1/2/2021 6:17:10 PM EDT
[#14]
Bagara with carbon fiber barrel and can. Buying 8t built out was cheaper than converting one of the four I astray own
 Attached File |
|
|
|
Posted: 1/2/2021 6:18:13 PM EDT
[#15]
Quote HistoryFlip flops and helmet make her as aerodynamic as a tank going downhill. |
|
|
|
Posted: 1/2/2021 6:26:20 PM EDT
[#16]
One of mine, a pre warning, turned 50 this year and I left it alone.
The other one I unfudded it to the max. |
|
|
|
Posted: 1/2/2021 6:30:29 PM EDT
[#17]
Quote HistoryQuoted: I march to the beat of my own drum.  https://www.ar15.com/media/mediaFiles/88145/rc_002__2__JPG-1665624.JPG That is a pretty nice modified folding stock. |
|
|
|
Posted: 1/2/2021 6:37:44 PM EDT
[#18]
The 10/22 receiver looks to be a good 3D printer project.
|
|
|
|
Posted: 1/2/2021 7:12:30 PM EDT
[#19]
Quote HistoryI have a SS version with laminate stock I bought in the early 90’s. It is a right purty gun |
|
|
|
Posted: 1/2/2021 7:14:17 PM EDT
[#20]
Quote HistoryMan, I tried to snag a couple of those Mannlicher stocked babies on online auctions but ended up bailing after they were hitting $500 and up. |
|
|
|
Posted: 1/2/2021 7:15:48 PM EDT
[#21]
Quote HistoryMy pants get tight every time he pulls this out. |
|
|
|
Posted: 1/2/2021 7:23:32 PM EDT
[#22]
Quote HistoryQuoted: Gott Damm! Sexy As Fuck. Where can one acquire that stock? Mine came on this TALO distributor exclusive. I'm not sure how else someone would acquire one, except as a takeoff part. Also tweaked the irons; GI Tech front, NoDak rear w/integrated 1913 rail, and a Montana leather sling. Am thinking of getting a leather butt cuff that holds 2x 10 round mags, and an extended charging handle. |
|
|
|
Posted: 1/2/2021 7:25:29 PM EDT
[#23]
Quote HistoryQuoted: Man, I tried to snag a couple of those Mannlicher stocked babies on online auctions but ended up bailing after they were hitting $500 and up. It was definitely difficult; I had to pre-order it through an FFL buddy of mine, and wait. |
|
|
|
Posted: 1/2/2021 7:28:23 PM EDT
[#24]
|
|
|
|
Posted: 1/2/2021 7:28:51 PM EDT
[#25]
Mine has been modified. The front sight bead is missing
|
|
|
|
Posted: 1/2/2021 7:29:18 PM EDT
[#26]
Quote HistoryQuoted: That looks like its under the tail of a bike.. I like you  It’s the under seat storage of my Yamaha C3 50cc scooter. |
|
|
|
Posted: 1/2/2021 7:31:47 PM EDT
[#27]
Quote HistoryQuoted: @ahnglw Mine came on this TALO distributor exclusive. I'm not sure how else someone would acquire one, except as a takeoff part. Also tweaked the irons; GI Tech front, NoDak rear w/integrated 1913 rail, and a Montana leather sling. Am thinking of getting a leather butt cuff that holds 2x 10 round mags, and an extended charging handle. Gotcha. |
|
|
|
Posted: 1/2/2021 7:33:56 PM EDT
[#28]
Put the order in yesterday
31KIDD .22LR Bolt Finish: Scalloped Black (Expect 3 week delay) - 35.00 134.951134.95 51KIDD Bolt Handle Charging Assembly With Guide Rod & Springs Color: Black Ring 29.95129.95 12KIDD .22LR Bolt Buffer 5.9515.95 44-21KIDD .22LR 18" Black 556 Fluted Rifle Bull Barrel Barrel Length, Finish, and Muzzle Threading Option: 556 Bead Blasted with muzzle thread and cap - 50.00 300.001300.00 15Takedown Screw Color: black 6.0016.00 73KIDD Threaded Receiver Pins With Countersink Tool 29.95129.95 107967KIDD Two Stage Trigger Unit for the .22 Color: Black (expect 2 week delay) Trigger Blade Color/Style: Black Curved - 16.94 Pull Weight: 8oz/8oz=1lb (light target/plinking) Magazine Release Lever: Extended (medium/target) Speed or Long Magazine Release Lever: Speed/Long Lever - 15.00 Hammer Spring: .22 long rifle 321.891321.89 276KIDD .22 Steel Muzzle Brake .920" Finish: Black 28 Bead Blasted-Blued Chromoly 45.00145.00 Subtotal:873.69 Discount(s):0.00 Taxes:0.00 Shipping:34.67 TOTAL:908.36 Payments:908.36 Balance:0.00 |
|
|
|
Posted: 1/2/2021 7:41:59 PM EDT
[#29]
Send it off to Connecticut Precision Chambering for a tuneup, then toss it in a better stock.
10 round group of CCI SV at 25 yards in the center target.  Attached File |
|
|
|
Posted: 1/2/2021 7:43:28 PM EDT
[#30]
Quote HistoryQuoted: What's wrong with the 10/22 as it comes? https://www.AR15.Com/media/mediaFiles/495488/20200405_122414_jpg-1760719.JPG I will take that question. Early ones were ok but most any of the newer guns have pretty nasty triggers . Replace the whole unit or buy the parts and rebuild the one you have. I have done both. Aftermarket target barrels can be pretty accurate but they do so partly with super tight chambers which can hurt reliability . Along with trigger work I like to radius the bolt (directions at rimfirecentral.com) will have them running standard velocity target ammo and that is a big plus . I like the Ruger factory heavy barrel guns, nice stiff front heavy with a compromise chamber tight enough to be more accurate than the standard models but still reliable |
|
|
|
Posted: 1/2/2021 7:46:26 PM EDT
[#31]
Quoted: What's wrong with the 10/22 as it comes? https://www.AR15.Com/media/mediaFiles/495488/20200405_122414_jpg-1760719.JPG Crappy sights crappy trigger Hard Plastic Butt plate that slips and slides around on your shoulder. Mag release is difficult to work other then that, there fine....
|
|
|
|
Posted: 1/2/2021 7:52:34 PM EDT
[#32]
Quote HistoryQuoted: It’s the under seat storage of my Yamaha C3 50cc scooter. |
|
|
|
Posted: 1/2/2021 7:56:18 PM EDT
[#33]
Quote HistoryQuoted: It’s the under seat storage of my Yamaha C3 50cc scooter.
|
|
|
|
Posted: 1/2/2021 8:24:50 PM EDT
[#34]
Quote HistoryQuoted: Is the underfolder a one off or available for order? A guy on eBay sells them from Poland. They are not always listed. |
|
|
|
Posted: 1/2/2021 8:35:37 PM EDT
[#35]
www.rimfirecentral.com
|
|
|
|
Posted: 1/2/2021 8:38:20 PM EDT
[#36]
|
|
|
|
Posted: 1/2/2021 8:40:02 PM EDT
[#37]
I just finished this one and am saving for glass. Ever since we built my son his I have been wanting one for myself.
Left hand laminate stock. ER Shaw 16 threaded barrel Brn22 receiver Kidd bolt, handle, and recoil stuff Tacsol mag release And I dont remember who made the trigger assembly It should be a great shooter 
|
|
|
|
Posted: 1/2/2021 9:06:48 PM EDT
[#38]
Quote HistoryQuote HistoryWhen a $200 rimfire rifle and a $400 Airsoft M249 mate? I'm not sure how I feel about that. Quoted: Mostly Kidd parts on a Brownell's receiver, sitting in a Victor stock, Trijicon scope https://www.AR15.Com/media/mediaFiles/393191/20190624_114530_jpg-1760529.JPG @Sherminator Any complaints at all with the stock? That's the same one I'm planning to get next for one of my 10/22s. Looks good BTW. |
|
|
|
Posted: 1/2/2021 9:12:02 PM EDT
[#39]
Quote HistoryQuoted: Quote HistoryQuoted: Quoted: It’s the under seat storage of my Yamaha C3 50cc scooter. Yes, it’s quite gay. |
|
|
|
Posted: 1/2/2021 9:29:02 PM EDT
[#40]
Shooting .22 is as fun as paper airplanes. Cool for about a minute and a half.
|
|
|
|
Posted: 1/2/2021 9:38:34 PM EDT
[#41]
My ode to 80's survial magazines. Been meaning to SBR it, but I'm lazy and hate paperwork.
 |
|
|
|
Posted: 1/2/2021 9:40:39 PM EDT
[#42]
Quote HistoryQuoted: Put the order in yesterday 31KIDD .22LR Bolt Finish: Scalloped Black (Expect 3 week delay) - 35.00 134.951134.95 51KIDD Bolt Handle Charging Assembly With Guide Rod & Springs Color: Black Ring 29.95129.95 12KIDD .22LR Bolt Buffer 5.9515.95 44-21KIDD .22LR 18" Black 556 Fluted Rifle Bull Barrel Barrel Length, Finish, and Muzzle Threading Option: 556 Bead Blasted with muzzle thread and cap - 50.00 300.001300.00 15Takedown Screw Color: black 6.0016.00 73KIDD Threaded Receiver Pins With Countersink Tool 29.95129.95 107967KIDD Two Stage Trigger Unit for the .22 Color: Black (expect 2 week delay) Trigger Blade Color/Style: Black Curved - 16.94 Pull Weight: 8oz/8oz=1lb (light target/plinking) Magazine Release Lever: Extended (medium/target) Speed or Long Magazine Release Lever: Speed/Long Lever - 15.00 Hammer Spring: .22 long rifle 321.891321.89 276KIDD .22 Steel Muzzle Brake .920" Finish: Black 28 Bead Blasted-Blued Chromoly 45.00145.00 Subtotal:873.69 Discount(s):0.00 Taxes:0.00 Shipping:34.67 TOTAL:908.36 Payments:908.36 Balance:0.00 Great parts list....but no receiver? All KIDD parts are top quality and every one will improve a 10/22. The receiver though helps all of them to be their best. You will get a perfect barrel fit, the bolt will glide perfectly smooth, there will be zero trigger group play. It’s a PITA to order thru an FFL but in my experience it is well worth it. Plus, you can tell people you have a KIDD Classic....if you ever decide to sell it you will get way more attention than a Ruger receivered build. |
|
|
|
Posted: 1/2/2021 9:58:12 PM EDT
[#43]
|
|
|
|
Posted: 1/2/2021 9:59:54 PM EDT
[#44]
 Attached FileMy Dad bought me this 10/22 back in 2013 for my 23rd Birthday. It originally came with a synthetic stock. I found a beat up wooden stock at the local gun store for $10. Completely refinished it and brought it back to life. The scope is a Simmons that was on a 30-06 bolt gun I sold in 2012. Screwed a rail to the bottom of the fore-end and attached a cheap $25 bi-pod. Far from high-end but it's mine and I enjoy it as is. 
|
|
|
|
Posted: 1/2/2021 10:07:55 PM EDT
[#45]
They are fun to build and a blast to shoot, and you can spend as much or as little as you want.
 Attached File |
|
|
|
Posted: 1/2/2021 10:15:07 PM EDT
[#46]
|
|
|
|
Posted: 1/2/2021 10:15:18 PM EDT
[#47]
Ugh. Tag. Shit.
|
|
|
|
Posted: 1/2/2021 10:18:56 PM EDT
[#48]
I bought a stainless takedown about 4 years ago, 4000 rounds of ammo, about 4-5 each of 10, 15 and 25 round mags, a replacement buffer and a few other parts. Still haven't even fired the stock rifle. Next thing I want is the Magpul backpacker stock.
|
|
|
|
Posted: 1/2/2021 10:22:57 PM EDT
[#49]
Quote HistoryQuoted: https://www.AR15.Com/media/mediaFiles/260765/20150503_163314_jpg-1761120.JPG Kidd trigger, YHM/ER Shaw integrally suppressed barrel. Hows the cleaning process go on that? Looks fantastic. |
|
|
|
Posted: 1/2/2021 10:22:59 PM EDT
[#50]
If your ruger 10/22 isn’t suppressed then your doing it wrong.
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File