User Panel
User Panel
User Panel
|
Posted: 3/12/2022 12:55:22 PM EST
[#1]
Sorta want the LE version in OD.
|
|
|
|
Posted: 3/12/2022 1:14:03 PM EST
[#2]
Quote HistoryQuoted: I haven't seen anything like that for the Comp. As you probably already know, the factory pic rail on the Tactical puts a red dot too high to co-witness with the sights. An Aridus CROM solves that, but won't fit the Comp. I'll buy a Comp if I can ever find one for a decent price. Yep. Not much point to having back up sights if the front dot is completely blocked by the optic. I did see that XS has Big Dots that mount over a bead and a ghost ring that mounts to the rear end of a rail. That may be an option, depending on how high the red dot sits. Local place has one in stock for a very reasonable price. I may have to just grab it and figure the rest out. |
|
|
|
Posted: 3/12/2022 1:19:50 PM EST
[#3]
Go to Langdon Tactical
|
|
|
|
Posted: 3/12/2022 3:49:37 PM EST
[#4]
Quote HistoryQuoted: They are both really nice shotguns. I’ve been coveting the 21” Comp for a while nice. Would make a great all around shotgun in a hybrid field/defensive role. Yep. I’ve told myself that if I ever see a 21” comp in olive green on the shelf, I’m getting it. I’ve seen some 18”, but not the 21” so far. I don’t need it bad enough to order it, but if it appears before me, it means the universe needs me to own it. 
|
|
|
|
Posted: 3/12/2022 3:52:52 PM EST
[#5]
anyone know when aridus is going to release more croms or handgaurds?
i have the nordic extension, and a magpul stock on mine but i really want that handgaurd. |
|
|
|
Posted: 3/12/2022 3:59:14 PM EST
[#6]
Quote HistoryQuoted: anyone know when aridus is going to release more croms or handgaurds? i have the nordic extension, and a magpul stock on mine but i really want that handgaurd. Pretty sure Beretta has the croms at their site |
|
|
|
Posted: 3/12/2022 4:01:23 PM EST
[#7]
I have a new CROM for the rmr with rob haught mod. Also have a new Aridus fde hand guard that I’ll prob sell.
|
|
|
|
Posted: 3/12/2022 4:09:53 PM EST
[#8]
Quote HistoryQuoted: I have a new CROM for the rmr with rob haught mod. Also have a new Aridus fde hand guard that I’ll prob sell. PM sent! |
|
|
|
Posted: 3/30/2022 3:00:21 PM EST
[#9]
Well 200 slugs arrived at my door yesterday, going to take the 1301 to the range this weekend and put some rounds through it. Only about 10 rounds have gone through it since I bought it
|
|
|
|
Posted: 3/30/2022 3:01:48 PM EST
[#10]
i have a foot/peddle activated clay thrower ready to be built im going to shoot a case of clays and many hundreds of rounds of birdshot tomorrow
 my 1301 is essentially finished minus the mismatched colors, shotgun is green, aridus handguard is FDE, magpul stock is black 
|
|
|
|
Posted: 3/30/2022 3:09:00 PM EST
[#11]
Quote HistoryQuoted: i have a foot/peddle activated clay thrower ready to be built im going to shoot a case of clays and many hundreds of rounds of birdshot tomorrow my 1301 is essentially finished minus the mismatched colors, shotgun is green, aridus handguard is FDE, magpul stock is black Mine is FDE with a black stock and handguard. I do want to another though. Maybe a comp pro, even though I have like no use for it
|
|
|
|
Posted: 3/30/2022 8:33:10 PM EST
[#12]
I’ve been periodically looking for a 1301 Comp locally, but having no luck. Did a couple online searches and came up empty. Anybody seen a 1301 Comp available?
|
|
|
|
Posted: 3/30/2022 8:46:06 PM EST
[#13]
Quote HistoryQuoted: I’ve been periodically looking for a 1301 Comp locally, but having no luck. Did a couple online searches and came up empty. Anybody seen a 1301 Comp available? Seems like the 1301 in general is out of production right now. Haven’t seen any of the tactical models in stock anywhere. Also have a 92x that’s been sitting in there warranty repair department since November. Think they are having problems across the board. |
|
|
|
Posted: 3/30/2022 8:53:29 PM EST
[#14]
Quote HistoryQuoted: Seems like the 1301 in general is out of production right now. Haven’t seen any of the tactical models in stock anywhere. Also have a 92x that’s been sitting in there warranty repair department since November. Think they are having problems across the board. Quote HistoryQuoted: Quoted: I’ve been periodically looking for a 1301 Comp locally, but having no luck. Did a couple online searches and came up empty. Anybody seen a 1301 Comp available? Seems like the 1301 in general is out of production right now. Haven’t seen any of the tactical models in stock anywhere. Also have a 92x that’s been sitting in there warranty repair department since November. Think they are having problems across the board. I’ve seen a couple back in stock notifications for the tactical. KYGun was one, but don’t recall the others. All were in the last month, or so, but I’ve decided on the comp and trying to be patient. Much longer and I may begin to regret not jumping on the Tactical when it was available. |
|
|
|
Posted: 3/30/2022 9:08:37 PM EST
[#15]
Quote HistoryQuoted: I’ve seen a couple back in stock notifications for the tactical. KYGun was one, but don’t recall the others. All were in the last month, or so, but I’ve decided on the comp and trying to be patient. Much longer and I may begin to regret not jumping on the Tactical when it was available. That’s good. Glad that some are in making it out |
|
|
|
Posted: 4/8/2022 8:23:39 PM EST
[#16]
Just got an email from GG&G showing a new charging handle. It's only money, right?..
https://www.gggaz.com/beretta-tactical-charging-handle.html |
|
|
|
Posted: 4/8/2022 8:25:42 PM EST
[#17]
Quote HistoryQuoted: Just got an email from GG&G showing a new charging handle. It's only money, right?.. https://www.gggaz.com/beretta-tactical-charging-handle.html
|
|
|
|
Posted: 4/8/2022 8:29:08 PM EST
[#18]
Quote HistoryQuoted: Just got an email from GG&G showing a new charging handle. It's only money, right?.. https://www.gggaz.com/beretta-tactical-charging-handle.html I guess I'll add this to the list of stuff to get with my next paycheck |
|
|
|
Posted: 4/8/2022 8:35:14 PM EST
[#19]
Ordered !!! ??
|
|
|
|
Posted: 4/8/2022 8:53:20 PM EST
[#20]
Quote HistoryQuoted: Just got an email from GG&G showing a new charging handle. It's only money, right?.. https://www.gggaz.com/beretta-tactical-charging-handle.html That looks bigger than the Aimpoint Pro mount nob |
|
|
|
Posted: 4/8/2022 10:01:32 PM EST
[#21]
Quote HistoryQuoted: Just got an email from GG&G showing a new charging handle. It's only money, right?.. https://www.gggaz.com/beretta-tactical-charging-handle.html Ok, I don’t have a 1301 yet, but the link pulled me in to all of gg&g’s 1301 accessories. What’s the benefit of the angled side saddle? It seems that the rounds pointed down would be awkward for a reload, while the rounds pointed up would be smoother and more efficient. Just for the photo up? I do have an 870 with perpendicular Mesa side saddle and seems to work as intended. Never really had an issue but think the angle may work well, if it’s loaded with the same ammo. |
|
|
|
Posted: 4/8/2022 10:06:54 PM EST
[#22]
^^^
No idea, I use Esstac shotgun cards. |
|
|
|
Posted: 4/8/2022 10:09:56 PM EST
[#23]
Quote HistoryQuoted: ^^^ No idea, I use Esstac shotgun cards. Probably going to go with that whenever I find a 1301 Comp 21”. Just curious. |
|
|
|
Posted: 4/14/2022 12:16:59 PM EST
[#24]
Primary arms has +8 lancer tube extensions for the 1301 comp on sale for 75 bucks. Pretty good deal.
|
|
|
|
Posted: 4/15/2022 11:25:26 PM EST
[#25]
Quote HistoryQuoted: Just got an email from GG&G showing a new charging handle. It's only money, right?.. https://www.gggaz.com/beretta-tactical-charging-handle.html Well, that was a waste of money and will be going back to them. The shape of the stem that goes into the bolt is completely different than the stock charging handle and it won't lock into position. The stock handle has a protrusion on the end similar to a key that catches in the bolt. The GG&G is a straight stem with a recess at the end. Been fighting it for 20 minutes and it pulls right out with very little pressure.  |
|
|
|
Posted: 4/15/2022 11:39:20 PM EST
[#26]
Quote HistoryQuoted: I would very much like to buy one but I'm poor. Yeah me too. But my Hatsan Escort semi auto has never failed me. I wish it wasn't a pistol grip but it's been flawless |
|
|
|
Posted: 4/15/2022 11:58:41 PM EST
[#27]
Well that sucks….think they might have sent you the wrong one? Cant believe GG&G would mess up a design that bad.
Quote HistoryQuoted: Well, that was a waste of money and will be going back to them. The shape of the stem that goes into the bolt is completely different than the stock charging handle and it won't lock into position. The stock handle has a protrusion on the end similar to a key that catches in the bolt. The GG&G is a straight stem with a recess at the end. Been fighting it for 20 minutes and it pulls right out with very little pressure. https://www.24hourcampfire.com/ubbthreads/gallery/80/full/190234.jpg Quote HistoryQuoted: Quoted: Just got an email from GG&G showing a new charging handle. It's only money, right?.. https://www.gggaz.com/beretta-tactical-charging-handle.html Well, that was a waste of money and will be going back to them. The shape of the stem that goes into the bolt is completely different than the stock charging handle and it won't lock into position. The stock handle has a protrusion on the end similar to a key that catches in the bolt. The GG&G is a straight stem with a recess at the end. Been fighting it for 20 minutes and it pulls right out with very little pressure. https://www.24hourcampfire.com/ubbthreads/gallery/80/full/190234.jpg |
|
|
|
Posted: 4/16/2022 12:06:37 AM EST
[#28]
Quote HistoryQuoted: Well that sucks….think they might have sent you the wrong one? Cant believe GG&G would mess up a design that bad. It's the right one. I guess they figure that detent is enough to hold it in place, but it's not even close. The factory handle is not coming out unless the bolt head is pushed back to just the right position to release it. The GG&G pulls right out. |
|
|
|
Posted: 4/16/2022 4:55:53 AM EST
[#29]
 Just purchased two really nice used tactical LEO 1301’s ! Sometimes it pays to be persistent…… |
|
|
|
Posted: 4/16/2022 5:49:27 AM EST
[#30]
Langdon Tactical sent an email out on Thursday about having 1301’s in FDE and OD in stock. I purchased mine there last year and love the setup.
|
|
|
|
Posted: 4/16/2022 10:27:37 AM EST
[#31]
Quote HistoryQuoted: Well, that was a waste of money and will be going back to them. The shape of the stem that goes into the bolt is completely different than the stock charging handle and it won't lock into position. The stock handle has a protrusion on the end similar to a key that catches in the bolt. The GG&G is a straight stem with a recess at the end. Been fighting it for 20 minutes and it pulls right out with very little pressure. https://www.24hourcampfire.com/ubbthreads/gallery/80/full/190234.jpg Well that's depressing, thankfully I waited. I'm sure someone will come out with an aftermarket one that actually works soon enough |
|
|
|
Posted: 4/16/2022 5:22:36 PM EST
[#32]
I’ve got 1301 incoming (finally) and I’m going to swap out to a Magpul stock.
Does it really matter if I get the Remington or Mossberg version, or are they the same? Probably going with the GGG conversion plate either way. |
|
|
|
Posted: 4/16/2022 5:56:51 PM EST
[#33]
Got my GG&G Charging Handle in today. It sure doesn’t install as securely as the factory one but mine, once installed, you have to pull like heck to get it out. I fired about 25 rounds today and it easily stayed in place.
I still would have preferred they make it like the factory one where the bolt had to be manipulated just right for it to come out. |
|
|
|
Posted: 4/16/2022 8:13:09 PM EST
[#34]
Quote HistoryQuoted: Got my GG&G Charging Handle in today. It sure doesn’t install as securely as the factory one but mine, once installed, you have to pull like heck to get it out. I fired about 25 rounds today and it easily stayed in place. I still would have preferred they make it like the factory one where the bolt had to be manipulated just right for it to come out. It's interesting because their website talks about "Murphy". I'll take a stock handle that locks in place over an aftermarket that doesn't.....Murphy and all. |
|
|
|
Posted: 4/16/2022 8:23:44 PM EST
[#35]
Quote HistoryQuoted: I've got 1301 incoming (finally) and I'm going to swap out to a Magpul stock. Does it really matter if I get the Remington or Mossberg version, or are they the same? |
|
|
|
Posted: 4/16/2022 8:27:57 PM EST
[#36]
GGG makes an adapter for both. Just didn’t know if one stock was better than the other.
|
|
|
|
Posted: 4/16/2022 9:39:53 PM EST
[#37]
Quote HistoryQuoted: GGG makes an adapter for both. Just didn't know if one stock was better than the other.  Attached File |
|
|
|
Posted: 4/18/2022 10:10:48 AM EST
[#38]
To me the mossberg feels much more comfortable, especially for hammering. The Remington requires a long reach to the trigger … if you have huge hands it might be the one to go with.
The mossberg also has a little more drop than the Remington witch allows you to keep your head up a little more for transitions between targets. If your used to a high mounted red dot on your ar you will fight getting your head down on your shotgun stock and shoot over everything. If you see rib when you pull the trigger youl shoot about a foot high. Bad habit I get into when I’m trying to blaze lol |
|
|
|
Posted: 4/18/2022 10:30:22 AM EST
[#39]
Quote HistoryQuoted: It's the right one. I guess they figure that detent is enough to hold it in place, but it's not even close. The factory handle is not coming out unless the bolt head is pushed back to just the right position to release it. The GG&G pulls right out. Pretty much the same for almost every replacement bolt handle on the market. That led me to buy one of these: https://www.customguns.co.uk/product-page/big-bolt-release-handle I have one on my primary 1301T and it is correctly shaped and stays in place. It sticks out a little more than I'd like, but it hasn't caused any issues so far. I've seen CAD drawings of another offering from another company that I hope comes out soon as that one will be my preferred option. But for now I can tell you the one linked above works. |
|
|
|
Posted: 4/18/2022 10:32:19 AM EST
[#40]
Quote HistoryQuoted: To me the mossberg feels much more comfortable, especially for hammering. The Remington requires a long reach to the trigger … if you have huge hands it might be the one to go with. The mossberg also has a little more drop than the Remington witch allows you to keep your head up a little more for transitions between targets. If your used to a high mounted red dot on your ar you will fight getting your head down on your shotgun stock and shoot over everything. If you see rib when you pull the trigger youl shoot about a foot high. Bad habit I get into when I’m trying to blaze lol The reason why the Aridus adapter only works for the Mossberg stock is because that stock works better with the geometry and setup of the 1301. That's why the designer made it specifically for the Mossberg SGA. I have no desire to put the Remington SGA on my 1301. |
|
|
|
Posted: 4/18/2022 12:51:46 PM EST
[#41]
Quote HistoryQuoted: Pretty much the same for almost every replacement bolt handle on the market. That led me to buy one of these: https://www.customguns.co.uk/product-page/big-bolt-release-handle I have one on my primary 1301T and it is correctly shaped and stays in place. It sticks out a little more than I'd like, but it hasn't caused any issues so far. I've seen CAD drawings of another offering from another company that I hope comes out soon as that one will be my preferred option. But for now I can tell you the one linked above works. I called and talked to the owner of GG&G this morning and he made me feel better about it. He basically said to run it hard and if I ever have a problem to call him. Said it's pretty much the same design as Benelli M4 handles he's been making for 25 years and never any issues. |
|
|
|
Posted: 4/18/2022 1:55:37 PM EST
[#42]
Quote HistoryQuoted: I called and talked to the owner of GG&G this morning and he made me feel better about it. He basically said to run it hard and if I ever have a problem to call him. Said it's pretty much the same design as Benelli M4 handles he's been making for 25 years and never any issues. I haven't talked to the owner of GG&G. I did run similar setups and found that when I went to charge the gun...as one would need to do to use it for home defense...I was pulling the bolt handle out. But you do you. |
|
|
|
Posted: 4/18/2022 3:52:07 PM EST
[#43]
Looks like Aridus is designing one. Said to be locating like the Beretta one so it won't spin and pull out easy like the GG&G
 Attached File |
|
|
|
Posted: 4/18/2022 4:53:26 PM EST
[#44]
Anyone drilled and tapped a 1301Comp for the Aridus CROM? Would it even work?
|
|
|
|
Posted: 4/19/2022 6:14:49 AM EST
[#45]
Quote HistoryQuoted: Anyone drilled and tapped a 1301Comp for the Aridus CROM? Would it even work? The CROM is based on the holes on the 1301T as they come from the factory. The Comp has different holes...but if you drilled the same pattern of holes in the 1301 Comp that are on the 1301T, there's no reason why it wouldn't fit just fine. |
|
|
|
Posted: 4/20/2022 7:08:38 AM EST
[#46]
Quote HistoryQuoted: The CROM is based on the holes on the 1301T as they come from the factory. The Comp has different holes...but if you drilled the same pattern of holes in the 1301 Comp that are on the 1301T, there's no reason why it wouldn't fit just fine. Quote HistoryQuoted: Quoted: Anyone drilled and tapped a 1301Comp for the Aridus CROM? Would it even work? The CROM is based on the holes on the 1301T as they come from the factory. The Comp has different holes...but if you drilled the same pattern of holes in the 1301 Comp that are on the 1301T, there's no reason why it wouldn't fit just fine. Thanks. I was mostly worried about the profiles of the top of the receivers, but now that I take a closer look, the CROM seems to mount to the flat area. Should make for a fairly easy install. Couldn’t be much different than when I installed ghost rings on my 870. |
|
|
|
Posted: 4/30/2022 9:47:31 PM EST
[#47]
got my 1301, got the CROM mount and H2, I guess I need the nordic +2 next
|
|
|
|
Posted: 5/10/2022 1:19:11 PM EST
[#48]
Just bought my 1301 tactical off the EE today! It seems it already came with most aridus and nordic accessories...so I ordered a salvo 12 choke adapter!
|
|
|
|
Posted: 5/10/2022 3:43:07 PM EST
[#49]
Quote HistoryQuoted: Well, that was a waste of money and will be going back to them. The shape of the stem that goes into the bolt is completely different than the stock charging handle and it won't lock into position. The stock handle has a protrusion on the end similar to a key that catches in the bolt. The GG&G is a straight stem with a recess at the end. Been fighting it for 20 minutes and it pulls right out with very little pressure. https://www.24hourcampfire.com/ubbthreads/gallery/80/full/190234.jpg Toni systems on mine not nurled like that but it’s great.matches origional part end profile. |
|
|
|
Posted: 5/12/2022 6:54:01 PM EST
[#50]
Quote HistoryQuoted: Just bought my 1301 tactical off the EE today! It seems it already came with most aridus and nordic accessories...so I ordered a salvo 12 choke adapter! You got a smoking deal on that package! Congrats! |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
